United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

13,521 comments to United States Patent US 9,115,913 B1

  • Gerard McEk

    Dear Andrea,

    Recently you said the QuarkX will be demonstrated when it is ‘ready’, which you hope is within months.
    It will underpin the details of the ‘Tremendous Surprise’ that will be revealed then.
    Some questions if I may:
    1. To whom will it be demonstrated? (I hope it will be open to public or us, you followers).
    2. Where will it be demonstrated? (I assume Europe, Sweden?)
    3. Is it right to assume that ‘ready’ means ready for sales, so the QuarkX factory is ready and fully equipped, and test runs were successfull?
    Thanks for answering our questions.
    Kind regards, Gerard

  • Joe

    Dear Andrea,
    When QuarkX production starts (F8) do you intend to sell them as individual units for others to bundle and design applications for? Safety considerations should be no greater than for a box of matches, eh?
    Joe

  • Eric

    Thomas Darden needs to realize that he believes it’s perfectly okay to make our lives an endless treadmill of government interferences while providing few real benefits to our health and happiness. More than anything else, such beliefs shed light on Darden’s moral values and suggest incontrovertibly that he claims that we’re supposed to shut up and smile when he says temulent things.

    INDISPUTABLE FACTS:

    In 2005 the Cherokee owned company EnCap received more than $300 million in publicly sponsored bond financing for the Meadowland project in New Jersey and then filed for bankruptcy protection later in 2008 and did not complete the project.

    EnCap and another Cherokee affiliate earned millions of dollars in dumping fees on fill brought to the site.

    Cherokee created a whopping 27 new business entities in New Jersey alone. William Gauger, the CEO that Darden appointed was indicted by FBI for “fraudulent invoicing scheme“.

    In 2003, Cherokee raised $620 million in equity for investment in projects around the world. Cherokee’s portfolio of projects included industrial, office, hotel and residential properties. The shareholders of the investment funds are primarily large pension funds.

    In the meantime, from 2001 to 2004, Cherokee and its consultants had contributed almost $1.5 million to the Democratic State Committee to win the project on Petty’s Island, a $1 billion waterfront makeover intended to increase tax revenue and transform the town.

    Cherokee’s law firm DeCotiis even tapped Joseph Salema, a former top aide to Gov. James Florio. Salema pleaded guilty to securities fraud in 1995.

    How much money did the politically connected DeCotiis law firm and other EnCap consultants make from the pool of public financing? The Record reported during its own yearlong investigation that the Teaneck firm had billed nearly $9 million by 2004 alone.

    Thomas Darden’s words sound pretty until you read between the lines and see that Darden is secretly saying that he intends to exploit public sympathy in order to bolster support for his worthless escapades.

    Let me end this letter by challenging the readers to urge lawmakers to pass a nonbinding resolution affirming that Mr. Thomas Darden’s success is just a flash in the pan. Are you with me, or with the forces of aspheterism and oppression?

    Folks, check your facts:

    FBI
    https://www.fbi.gov/newark/press-releases/2012/encap-president-indicted-in-connection-with-extortion-and-fraudulent-invoicing-schemes

    The Philly Inquirer
    http://articles.philly.com/2005-10-16/news/25443353_1_mails-waterfront-developer-jim-mcgreevey

    New York Times
    http://www.nytimes.com/2005/10/30/nyregion/anatomy-of-a-deal-new-jersey-style.html

    Justia US Law
    http://law.justia.com/cases/new-jersey/appellate-division-published/2007/a3136-05-opn.html

    Office of the Inspector General (OIG) Report
    http://nj.gov/comptroller/news/oig/pdf/Meadowlands%20Remediation%20and%20Redevelopment%20Project.pdf

  • Andrea Rossi

    Dr Joseph Fine:
    The answer is very difficult.
    I prefer to limit my answer to what follow: if a R&D paid by the taxpayer is not able to reach its payback within 10 years, its development must be left to private investments, not to the taxpayer.
    About us, I want to be honest with our Customers: we want not money from the taxpayers, we want money from our customers that will buy our products.
    Beware of anybody that tells you to invest your money in corporations that collect public money without having a product in the market: most of them are financial scams and LENR world is not immune from these kind of attempts. I think is better to trust in nobody ( me included) if a real working product is not offered in the market.
    As you can see, our strategy is very simple and straight to the point. We have the resources to start a massive production, all the rest will depend on the reaction of the market. Our IPO will be made after the product will be in the market massively, not before.
    F8.
    Warm Regards,
    A.R.

  • Joseph Fine

    Dear Andrea Rossi,

    According to the current MIT Technology Review magazine, the latest cost overrun (not the total costs) for ITER will be $5.3 Billion (4.6 Billion Euros).

    https://www.technologyreview.com/s/601388/why-the-worlds-largest-nuclear-fusion-project-may-never-succeed/

    Assuming that ‘F8’ is positive, do you think you can build the first set of robust manufacturing facilities for the $5 Billion budgeted/(wasted) in this latest ITER cost overrun? At least that would be a good start!

    How do you explain the diversion of such vast resources compared with the lack of support for the LENR alternatives?

    QuarkX regards,

    Joseph Fine

  • Andrea Rossi

    Franz:
    Very well, still on schedule.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Frank Acland:
    Yes, we have: when we will present the product we will also present the factory.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Oeystein Lande:
    As soon as we will present the products. I hope it’s matter of months.
    Warm Regards,
    A.R.

  • Andrea Rossi

    “Jag bara undrar?”:
    About F8: maybe you are right !
    Jag bara undrar ?
    Warm Regards,
    A.R.

  • Andrea Rossi

    Teemu:
    You are right. When it will be ready, it will be demonstrated.
    Warm Regards,
    A.R.

  • Teemu

    Dear Andrea Rossi,

    To me, and I mean no malice by saying this, the biggest surprise would be to actually see the E-Cat X being demonstrated.

    Best Regards,

    Teemu

  • "Jag bara undrar?"

    F8 is a good key. So long everyting is in F8 stage is it possible to argue that you dont have any IP. (And i give you a reason to spam me he,he, he 😉

    Sometimes is it better to attack like a bird protective the nest. It prevents the predator for a while instead for “vice versa”….

    LENR is a research fields that will drive development forward with dizzying speed. Scientists will be drawn like a magnet to ” LENR research ” .
    The cat is about electricity, heat and light , but also about so much more ..:)Warm Regards “Jag bara undrar?”

  • Oystein Lande

    Dear Mr. Rossi,

    When will you be able to show pictures of a Quark X ?

  • Franz

    Dear Dr Andrea Rossi:
    How is working the QuarkX today?

  • Frank Acland

    Dear Andrea,

    Ok, I will wait for the surprise! Another question: do you have a place already secured for the first QuarkX factory? Can you say where it is?

    Thank you,

    Frank Acland

  • Andrea Rossi

    Joseph:
    Thank you for your sustain,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Frank Acland:
    If you put this question, you have imagined a hint of it.
    Warm Regards,
    A.R.

  • Andrea Rossi

    James Chapman:
    Thank you for your insight and for your very kind sustain to the work of our great Team.
    Warm Regards,
    A.R.

  • Andrea Rossi

    LookMo:
    We have now the force necessary to start the first massive production factory.
    After that, it will be the diffusion of the products to finance the exponential growth of our concern.
    F8.
    Warm Regards,
    A.R.

  • LookMoo

    Dear Mr. Rossi,

    The market for a LENR invention is almost immeasurable for the first 10-15 years (or even 30 years).. work for everybody. Just assume a majority of the close to 100 million vehicles entering the market every year can use a LENR based powertrain design. To that figure add all other applications that probably cripple the vehicle comparison. 1 Billion eCat devices would be needed every year to keep phase with the market needs for clean, abundant energy.

    1000 factories with a 1 million output/year will have to run 24/7.

    How many factories do you think is operating within.. lets say 5 years.

  • James Chapman

    Dear Mr. Rossi,

    Folks seem to be having a hard time visualizing what is actually happening in an E-Cat. Please allow me to put forth this visual model in order to clarify the “inner workings” and “deep mysteries” within.

    Consider a standard kitchen blender with a glass carafe, like you make margaritas in during warm summer afternoons.

    Like most blenders, the lid has a small plug which can be removed for adding ingredients during operation. Around the hole for the plug there is a small flat lip.

    Now, imagine this:

    1. Remove the plug, and balance a few steel ball bearings on the lip around the hole.

    2. Turn on the blender, just on low to start with, but SLOWLY increase the blender until it is up to “High”.

    Take a moment to look at it. The blades are whirling around at high RPM and the ball bearings are jiggling around from the vibration, teetering around the edge of the lip.

    3. Now, WHACK the blender with a rolling pin!

    What happens?

    The ball bearings fall from the lip and into the fast spinning blades below, and are sent smashing through the glass of the carafe, shattering it into pieces!

    In this visual aid, the blender blades are Nickel atoms, the ball bearings are Hydrogen Ions liberated from the Lithium-Aluminum-Hydride and the glass carafe is the web of Lithium Atoms mixed throughout.

    Heating the mixture to just short of the melting point of the nickel, and pumping up the electron shells about the nickel nuclei is represented by the power of the high speed blades.

    Whacking the blender with a rolling pin is identical to sending an Electromagnetic Pulse through the energized e-cat reactor vessel. Deformation of the electron shells causes the capture and eventual disassembly of hydrogen ions within the maelstrom of the electron shell energy fields resulting in the energetic expulsion of suddenly solitary protons.

    These ejected protons then collide with lithium atoms and transmutate Lithium 7 to Beryllium 8, which promptly decay to two Alpha – which consequently gain electrons to become Helium atoms.

    The process of the forced decay of Lithium to Helium – resulting in a large energy release – is well documented, and was the first nuclear fission process ever demonstrated. [see Cockcroft-Walton; 1932]

    The genius of the e-cat is in its application of the primary LENR process (proton liberation from an energized nickel-hydride) to effectively utilize individual Nickel atoms as sub-Nano scale proton accelerators.

    Indeed, this invention should be rightly considered a breakthrough in Nano-Tech Engineering, as the apparatus is, in fact, mechanical in nature rather than chemical or nuclear, just as a Scanning Electron Microscope is a MACHINE, not a “reaction”.

    Consider: This process does not involve molecular interactions and formations (other than the Hydride fuel supplement), so this exhibit can not be called “chemical” in nature. And, while we see Helium being produced while Hydrogen is consumed, this clearly is not “Fusion”, as it is a sequence going through Lithium and then DOWN to Helium. Now, in modern terms, the breakdown of Beryllium is a “decay” into Alpha particles as radiation, so this clearly does not qualify as fission under current models.

    So I repeat, the E-Cat is neither CHEMICAL, FISSION nor FUSION. It is a MACHINE! A beautiful, badass, Nano-Tech, Energy Liberating Machine!

    GOD BLESS YOU, Mr. Rossi. May he continue to bless your endeavours with success, while you continue to work to bring this to the masses!

    James Chapman

  • Frank Acland

    Dear Andrea,

    Why do you think the revelation of the E-Cat QuarkX will be such a surprise?

    Many thanks,

    Frank Acland

  • Joseph

    Dear Dr Andrea Rossi:
    I admire your way to defend your work: every phrase sustained with clear evidence against lies, intelligent irony against blunt insults, an enormous work to respond to infinite chatters. Obviously you are the winner.
    Godspeed,
    J.

  • Andrea Rossi

    Yrka:
    You can keep yourself updated in our website:
    http://www.leonardocorporation.com
    where we place all the updates related to our work.
    To your question #4 I am not yet able to answer.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Giuseppe:
    1- could be an idea to develope
    2- better change the module
    Warm Regards,
    A.R.

  • Giuseppe

    Dear Andrea,
    do a single 100W QuarckX module can be activated and controlled by a small battery, for example a Smart Phone battery?
    On the E-Cat, if i remember, the charge duration is about one year, on the QuarckX is possible to do a recharge or will be better change directly the single module?
    Best Regards, Giuseppe

  • Yrka

    Dear Mr. Andrea Rossi!
    I’m an engineer, and a half years I read your blog every day, watching the other publications on the topic “effect Rossi”.
    By the nature of its activities I certainly interested in the practical use of the E-Cat (and now Quark X).
    Could You will now give more technical information on:
    1. Domestic E-Cat -10 kW.
    2. 1 MW boilers and E-Cat X 250 kW.
    3. Quark X.
    If some new figures in were published, I will be grateful for the link.
    4. Could you identify the time frame beginning mass production of 1, 2, and Z?
    Very upset immoral management IH!

    Thank you for having found the time to answer my previous matters.

    Yury Isaev
    Tyumen
    Russia

  • Andrea Rossi

    Peter Gluck:
    Thank you for your link,
    Warm Regards
    A.R.

  • Dear Andrea,

    That’s my blog issue for today, about Babel Tower
    http://egooutpeters.blogspot.ro/2016/05/may-04-2016-is-there-some-similarity.html

    But it is a bit about verbal karate too
    where I want to keep my Black Belt.

    Best,

    Peter

  • Andrea Rossi

    Marshall Wiesberg:
    Thank you for the sustain,
    Warm Regards,
    A.R.

  • Andrea Rossi

    JP Renoir:
    one hour every day from 6 to 7 a.m. in this period.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Nick:
    It is going well also today.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Mindy:
    Thank you for the interesting link.
    Warm Regards,
    A.R.

  • Marshall Wiesberg

    Dear Mr Rossi,

    I could not help but to think of Industrial Heat while reading this article on Forbes.

    * Did Theranos Break the Law?

    http://www.forbes.com/sites/petercohan/2016/04/20/did-theranos-break-the-law/#3d437bed2de5

    Thank You for your work,

    Marshall

  • Andrea Rossi

    John Atkinson:
    Every Customer is important to us; no Customer is indispensable to us.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Luis Navarro:
    Thank you for the link,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ing. Michelangelo De Meo:
    Thank you for the link to the paper of Prof. Hidetsugu Ikegami.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ing Michelangelo De Meo:
    Thank you for the information.
    Warm Regards,
    A.R.

  • Ing. Michelangelo De Meo

    In Dubai, the cost of solar energy touches all-time low
    Submitted five bids for the third phase of the mega solar park from 5 GW of Dubai; the lowest, and winning, is only 2.99 cents per kilowatt hour.

    The Emirate of Dubai has set a new world record for the cost of solar power .
    This week, the Dubai Electricity & Water Authority ( DEWA ) has confirmed having received the lowest ever made ​​offer on the price of photovoltaic electricity purchase : only 2.99 cents per kWh .

    Dott. Rossi with ecatx be able to do a more competitive price for the current ?

    http://www.rinnovabili.it/energia/fotovoltaico/dubai-costo-dell-energia-solare-tocca-minimo-storico-666/

  • Nick

    Dear Dr Andrea Rossi:
    How is working today the QuarkX ?

  • JPRenoir

    Dear Dr Andrea Rossi
    How much of your daily time you dedicate to the study of Physics ?
    Cheers,
    JPR

  • Ing. Michelangelo De Meo

    Hello dr . Rossi: I want to suggest this reading.

    THE NATURE OF THE CHEMONUCLEAR TRANSITION
    Hidetsugu Ikegami

    http://www.roxit.ax/CN.pdf

  • Luis Navarro

    Dear Andrea,
    Update 2 from http://www.sifferkoll.se/sifferkoll/ on #LENR #ECAT Saga: Dewey Weaver – the FUD & Uncertainty Machine In Action!
    All the best
    Luis

  • John Atkinson

    Assuming the June demonstration is a success and the customer purchases a number of the X,would this be the defining moment for all of your hard work and blood sweat and tears. Would it also provide the capital needed to launch your fabulous X to a mass market and making a difference in this world as you so humbly invinsioned it when you began this journey. In other words, would this be the defining moment to rise the curtain and gaze at the sunshine. Thank you and God bless.

  • Andrea Rossi

    Norma:
    Thank you, I do my best.
    Warm Regards,
    A.R.

  • Andrea Rossi

    “Jag bara undrar?”:
    Too soon to say.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Italo R.:
    Yes.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Hergen:
    Thank you for the interesting link. No, any energy source will be integrated, as I always said.
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>