Compared to previous partners and licensees you have been involved with, how important for the development of the E-Cat is this new partner you have just been testing with.
Mr Andrea Rossi:
after the completion of the preliminar R&D phase, as you call it, will the QuarkX be put in operation in a real context, to test its validity in the real world ?
Thanks,
JC
I know you can not reveal details of your Quark device as yet, but please allow me to ask a generalized question…
Do you believe, given the current state of development, that you could build a Quark based reactor/generator producing 2.5 MW of electric power that would fit entirely in a standard 48 foot shipping container? That would have to include all support and control systems and it would need to be configured for electrical output at one end via a set of heavy bus bars or terminals.
If so, while you are pursuing your current customer/partner relationship for commercialization and marketing, I would suggest you take a moment to consider looking into the Freight Rail sector for additional marketplace. A modern Diesel-Electric Locomotive produces 2.2 MW. A shipping container as I describe could be added as a modern “Coal Cart” behind existing locomotives to provide electrical power, and would require zero infrastructure modification.
Only the subject Locomotive would require the retrofit of the external Power connectors. This would be a HUGE market, requiring minimal points of contact for sales and marketing. It would be totally scalable dependant only upon service success. It would require minimum commitment or investment for a Rail provider to make an initial trial agreement.
Perfecting the shipping container format would then be marketable as a stand alone power system for a large marketplace outside the Rail environment.
You could focus then on one single design – one constant footprint – with a guaranteed marketplace – that could keep you building at max capacity for years, all while developing a package that would have universal sales appeal.
When you compile the report, please publish a graph showing power input vs. temperature for the duration of the tests with the repeated, extended periods of self sustain (for example 30 minutes or longer) in which there was no input power clearly marked. If you used both a thermal imager and a thermocouple to measure temperature, please have two lines — one for each measurement device. Also, if you utilized a control or dummy “Quark” please have a lines on the graph representing it’s input and temperature.
Such a graph showing the periods of self sustained operation — which you have said can be over an hour — obvious for everyone to see. I know everyone is eager to see data showing the extended periods of self sustain in which the temperature remains constant without input power. They will represent strong evidence of excess heat, because at 1400C or higher a Quark without input power should drop hundreds of degrees in seconds.
If you could grant this request, it would be a huge personal favor to me.
Robert Dorr:
I will. The test is finished right now.
Tomorrow we will make a short report. The day after tomorrow it will be published.
Thank you for your kind words.
Warm Regards,
A.R.
I hope the end of the test/demonstration with your customer/potential partner finds you in upbeat mood. I’m hopeful that what was needed to be conveyed was successfully accomplished. Good luck with what the future brings. You have managed to stay on track even though there has been, and continues to be, some rather large distractions. I’m hoping you will be able to provide us with just a glimpse of the project on which you have been working.
Dear Dr. Rossi,
please some (at least) symbolic/illustrative photo from test
(for our blogs). As always, please give all to us for free, no copyright on them !
Dear Andrea,
I read that you are still teamed up with hot lady QuarkX. I guess she is doing most of the work in being extremely hot, maybe sparking and de-light-ful? But what do you do?
Just one other question that came up. I hope you will be able to tell us if one QuarkX can produce the heat to start-up another, so no additional heater on the second is required?
Good luck with the results of the test!
Kind regards, Gerard
Dr Andrea Rossi,
Thank you for your work: in these last 6 years you turned the battered field of the lenr into the hot spot of the world R&D in the energy echelon.
Cheers,
Ruben
Dr Andrea Rossi:
The production of the 1 MW plants like the E-Cat tested for one year in the factory of Doral will be made independently from the R&D on course for the QuarkX ?
Thank you if you can answer,
Margie
Frank Acland:
Very important.
Warm Regards
A.R.
Luis Navarro:
Thank you for the link.
Warm regards
A.R.
Dear Andrea,
New post from http://www.sifferkoll.se/sifferkoll/mad-dog-fred-zoepfl-of-the-ecn-troll-dungeon-plans-to-visit-swedish-embassy-to-discuss-lithium/
Best
Luis
Dear Andrea,
Compared to previous partners and licensees you have been involved with, how important for the development of the E-Cat is this new partner you have just been testing with.
Many thanks,
Frank Acland
Mark Hansen:
Yes.
Warm Regards,
A.R.
Hi Andrea,
You mentioned “our partner” does that confirm a new business partnership?
Dr Andrea Rossi:
I suppose the QuarkX will be employed forst in industrial applications, eventually in households. Correct ?
Thanks,
Henry
Javier Cartier:
Yes.
Warm Regards,
A.R.
Hector Farlin:
Probably yes, at the latest will be by tomorrow, after we will have collected the approval of our Partner.
Warm Regards,
A.R.
Toussaints:
We are preparing short report with the main results. It will not take long.
Warm Regards,
A.R.
Dear Andrea Rossi,
Now that the test is finished, are you able tell if it is a success?
Warm regards,
Toussaint François
Dear r Andrea Rossi,
Is confirmed for today the publication of the report by today ?
Cheers,
Hector
Mr Andrea Rossi:
after the completion of the preliminar R&D phase, as you call it, will the QuarkX be put in operation in a real context, to test its validity in the real world ?
Thanks,
JC
Chapman:
We are not ready for that now. I am not able to answer.
Thank you for the suggestions.
Warm Regards,
A.R.
Hank Mills:
It will not be that kind of report.
Warm Regards,
A.R.
Sir,
I know you can not reveal details of your Quark device as yet, but please allow me to ask a generalized question…
Do you believe, given the current state of development, that you could build a Quark based reactor/generator producing 2.5 MW of electric power that would fit entirely in a standard 48 foot shipping container? That would have to include all support and control systems and it would need to be configured for electrical output at one end via a set of heavy bus bars or terminals.
If so, while you are pursuing your current customer/partner relationship for commercialization and marketing, I would suggest you take a moment to consider looking into the Freight Rail sector for additional marketplace. A modern Diesel-Electric Locomotive produces 2.2 MW. A shipping container as I describe could be added as a modern “Coal Cart” behind existing locomotives to provide electrical power, and would require zero infrastructure modification.
Only the subject Locomotive would require the retrofit of the external Power connectors. This would be a HUGE market, requiring minimal points of contact for sales and marketing. It would be totally scalable dependant only upon service success. It would require minimum commitment or investment for a Rail provider to make an initial trial agreement.
Perfecting the shipping container format would then be marketable as a stand alone power system for a large marketplace outside the Rail environment.
You could focus then on one single design – one constant footprint – with a guaranteed marketplace – that could keep you building at max capacity for years, all while developing a package that would have universal sales appeal.
Just a thought…
Dear Andrea,
I have a request.
When you compile the report, please publish a graph showing power input vs. temperature for the duration of the tests with the repeated, extended periods of self sustain (for example 30 minutes or longer) in which there was no input power clearly marked. If you used both a thermal imager and a thermocouple to measure temperature, please have two lines — one for each measurement device. Also, if you utilized a control or dummy “Quark” please have a lines on the graph representing it’s input and temperature.
Such a graph showing the periods of self sustained operation — which you have said can be over an hour — obvious for everyone to see. I know everyone is eager to see data showing the extended periods of self sustain in which the temperature remains constant without input power. They will represent strong evidence of excess heat, because at 1400C or higher a Quark without input power should drop hundreds of degrees in seconds.
If you could grant this request, it would be a huge personal favor to me.
Thank you.
Hank Mills
Robert Dorr:
I will. The test is finished right now.
Tomorrow we will make a short report. The day after tomorrow it will be published.
Thank you for your kind words.
Warm Regards,
A.R.
Andrea,
I hope the end of the test/demonstration with your customer/potential partner finds you in upbeat mood. I’m hopeful that what was needed to be conveyed was successfully accomplished. Good luck with what the future brings. You have managed to stay on track even though there has been, and continues to be, some rather large distractions. I’m hoping you will be able to provide us with just a glimpse of the project on which you have been working.
Sincerely,
Robert Dorr
Peter Gluck:
Thank you for the link,
Warm regards,
A.R.
Luis Navarro:
Thank you for the link.
Warm Regards,
A.R.
Dear Andrea,
Latest from http://www.sifferkoll.se/sifferkoll/envy-hate-and-some-greed-the-glue-that-holds-the-cryptodenialists-like-dewey-fred-jed-together/
Also eagerly awaiting your news!
Best
Luis
Dear Andrea,
This is the Sunday- but rather mrtial edition of EGO OUT:
http://egooutpeters.blogspot.ro/2016/06/june-12-2016-no-synthesis-paralysis-in.html
A great new week!
Peter
Samec:
I will see what I can do…
Warm Regards,
A.R.
Daniel G. Zavela:
Maybe a very good idea ! Thank you for your kind words.
Warm Regards,
A.R.
Dear Dr. Rossi,
We are all captivated by your work with the QuarkX.
If it is successful, would you consider re-naming your new cell the DaVinci?
Best of luck with your progress. Hope you don’t have to have another hospital operation to make future improvements. 🙂
Best Regards,
Daniel G. Zavela
Dear Dr. Rossi,
please some (at least) symbolic/illustrative photo from test
(for our blogs). As always, please give all to us for free, no copyright on them !
Best Regards Samec
Frank Acland:
Yes.
Warm Regards,
A.R.
Julian Becker:
Will be interesting.
Warm Regards,
A.R.
Dear Andrea,
Can we expect a very important announcement from you today?
Has the test been a success?
Best regards from sunny Mauritius,
Julian Becker
Dear Andrea,
Does the conclusion of the current test signal the end of the preliminary R&D phase for the QuarkX?
Many thanks,
Frank Acland
K.S.:
Yes.
Warm Regards,
A.R.
Nicolas:
Yes.
Warm Regards,
A.R.
Dear Andrea:
About theoretical issues: are there for the QuarkX clear ideas about the theoretical roots of its operation ?
Regards,
Nick
Dr Andrea Rossi:
Will we have news about the QuarkX test tomorrow, as you promised ?
Peter Gluck:
Thank you for your link,
Warm Regards,
A.R.
Dear Andrea,
a Saturday edition of EGO OUT here:
http://egooutpeters.blogspot.ro/2016/06/june-11-2016-lenr-has-acieved-self.html
A fine weekend to you and all the readers
peter
Gerard McEk:
What do I do? I measure, observe and learn.
About the E-Cat series: so far it is not possible for safety reasons.
Warm Regards
A.R.
Dear Andrea,
I read that you are still teamed up with hot lady QuarkX. I guess she is doing most of the work in being extremely hot, maybe sparking and de-light-ful? But what do you do?
Just one other question that came up. I hope you will be able to tell us if one QuarkX can produce the heat to start-up another, so no additional heater on the second is required?
Good luck with the results of the test!
Kind regards, Gerard
Karol:
Yes.
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
Is the QuarkX a completely different thing from the 1 MW E-Cat ?
Cheers,
K
Tom Conover:
I am here with her, working together.
Warm Regards
A.R.
Hello Andrea,
How did the QuarkX(3) perform today, does she survive?
Thank you,
Tom
Frank Acland: no, we are working today and tomorrow too.
Monday I will give information about the situation.
Warm Regards,
A.R.
Margie:
Obviously yes !
Warm Regards,
A.R.
Saul:
Yes, good or bad as they might be.
Warm Regards,
A.R.
Ruben:
Thank you,
Warm Regards,
A.R.
Dr Andrea Rossi,
Thank you for your work: in these last 6 years you turned the battered field of the lenr into the hot spot of the world R&D in the energy echelon.
Cheers,
Ruben
Dear Andrea Rossi:
You confirm that Monday we will have information about the QuarkX ?
Thank you,
Saul
Dr Andrea Rossi:
The production of the 1 MW plants like the E-Cat tested for one year in the factory of Doral will be made independently from the R&D on course for the QuarkX ?
Thank you if you can answer,
Margie