With an assumed COP enough high and direct electricity production and light generation, it should be conceptually possible to do the following:
a. Configure the Quark to output light
b. Configure the Quark to output direct electrical power
c. Convert the electrical power into wall power
d. Charge a battery from the wall power
e. Use the battery power to convert to a power form that the Quark can use as an input
f. Power the input of the Quark
If you are able to do all of the above, you should produce a light that will run for a year with no electrical input (other than a start-up power). Would not this be the definitive example of the Rossi Effect? (no input, measured output, for a very long time)
look here at one of the most interesting technologies today, direct air capture (DAC) of carbon dioxide; it’s only a demonstrative plant, but would strongly benefit from LENR competitive electric production:
I may be wrong but I don’t think that the name Quark is going to stick. People (ordinary people) don’t know what a quark is and the word is too difficult to pronounce. Would you be willing to change the name at some point? I always thought E-Cat X was genius. Or names like E-Cat X Lite to refer to a different size version of the E-Cat X for example.
One day I’m sure there’ll be so many versions of the E-Cat, you’ll probably have a Light only version, electricity only, heat only, heat and light at 50-50 ratio, heat and light at 10-90, Electricity & Light, Electricity & heat at various ratios etc. All these variations will have to be reflected in the name.
Dr Andrea Rossi
On July 4th I saw a guy riding a red bike with a very strange design, wearing a blue fatigue, around 7 p.m. along the bike lane of Ocean Drive ( Miami Beach ): was it you ?
I bet it was you with a friend who says it was not.
Cheers,
Sean
Dear Andrea
I think you saw the last replication of your effect made by Alexander Parkomov : it appears to be very conservative and precise. What do you think ?
Warm Regards,
DT
Nils Fryklund:
If you go to http://www.leonardocorporation.com
and navigate it thoroughly, you will find the links to all the reports existing about the measurements made with the E-Cats.
You will also find all the replications made by third parties.
Surely in Sweden we are starting a strong activity, therefore it is possible that a seminar will be made.
Warm Regards,
A.R.
Dear Andrea!
1. Is it not possible to have a report about how the 1MW-plant works before sept 2017?
2. Do you think there will be a seminar in Sweden about E-cat this year?
3. Is it really so hard, as it says, to prove that E-cat works with good COP?
Best regards
Nils Fryklund
Frank Acland:
1- I think so
2- My report on the quarK is provisional. A real report must come from a different procedure.
3- We are working in the USA for the industrial plants.
Warm Regards
A.R.
You mentioned that there would be more reports coming from the testing of the 1MW plants you are currently making for your first customer.
1. Will the reports be published for the public to read?
2. Will these be third party reports, or will they be internal reports (similar to your short QuarkX report)
3. How long until these reports will be made?
4. How is work going on building these plants?
Why if, as Weaver claims, IH never measured any excess heat, has he collected millions
from his investors in Deep River Venture Capital ** when only your IP was in the portfolio
of his funds, as well as in the Cherokee fund of his partner Tom Darden ?
Dr Andrea Rossi:
Have you ever tried to treat radioactive wastes with your technology to reduce the radioactivity by means of transmutations ?
Thank you,
MZ
Steven N. Karels:
Many prototypes self destruct themselves without necessity of us to help them in this purpose… I cannot comment further, before due patent will be filed, to avoid pre-disclosure.
Warm Regards,
A.R.
Dear Andrea Rossi,
After the debate of these last days you got a new follower: me. Talking with my friends about you, got the feeling that the silent maority sustaining you is growing up.
Please continue your great work,
Godspeed,
Johnson
Have you conducted the test on your new eCat to drive it to self-destruction, similar to what you did with the previous model? If so, any different or unusual results or products?
Dr Rossi
What do you think of the replication of your process made by Brillouin in Washington after their agreement with Industrial Heat ?
Cheers,
Martin
Dear Dr Andrea Rossi,
I know you never comment the work of your competitors, but can you tell us:
1- who are your competitors who are making the most promising work, from your point of view ?
2- who are your competitors that are making the less promising work, from your point of view ?
Thank you if you can answer,
G.
Dear Andrea,
I was a sceptic against you, but after your struggle against your enemies and the passion of your work I am turning to be a follower.
I liked very much your answer to Frank Acland related to the accusations of IH against you.
Godspeed,
Jose’
Martin Pietsch:
October 31st: yes, it was the plant that eventually has been tested.
November 23rd: in fact the 1 MW plants were for sale at the time; about the domestic, I assumed 2 years would have been enough for the safety certification, but I was wrong. My mistake.
November 28th: yes, we sold it, but later the Customer did not pay the installment that had to be paid at the order. Eventually that same plant has been sold to Industrial Heat.
There are issues that do not depend on me and would need a cristal ball to be foreseen…besides I am sometimes too optimistic, this is a characteristic of mine…and of every inventor.
Warm Regards,
A.R.
about applications in extreme camping situations, if Rossi could be reincarnated back in the XIX century (always a possible LENR utility not to be ruled out), he would have been mentioned by Jules Verne in Journey to the center of the Earth with his Quarks in place of induction coils and Ruhmkorff lamps. The format is so similar that also the classic Levin’s movie should not be re-shooted at all. My only worry is that Quarks are so much tiny and prone in my opinion to break off in salty sands, that I invoke urgently a fix.
Dear Mr. Rossi,
here in Germany some statements from earlier are still under discussion:
October 31st, 2011 at 9:01 AM:
We have started the manufacturing of 1 MW plants. Who wants to buy them whatever its Nation, can contact us at:
November 23rd, 2011 at 3:14 PM:
The 1 MW plants are already for sale. The small E-Cats will be for sale within 2 years.
November 28th, 2011 at 6:48 PM:
Today we sold in the USA a 1 MW plant which will go to a normal Customer. This installation will be visitable by the qualified public.
What were the delays at that time and can it happen today also again?
Bernie Koppenhofer:
Why, that’s top strategy ! Thank you indeed, and a wonderful July 4th to you and, again, to all our American Readers. This is a very important recurrence.
Warm Regards,
A.R.
Dear Andrea:
Your answer to Frank Acland makes clear who is lying and who is inventing excuses. It also has been published on EW that the trial has been anticipated to June 2017, which allows to assume that the “motion to fly away” has been botched.
Godspeed.
Marcia
Dr. Rossi: It sounds to me like it would be wise for you to play mixed doubles with you wife as you partner, so she can carry you. Based on the old adage, if you can’t beat them, join them. Have a great 4th of July.
Amos:
I agree with you, but consider that the “onlies” reduce the efficiency to the utilizer.
Warm Regards,
A.R.
Orsobubu:
Thank you for the interesting information,
Warm Regards,
A.R.
Steven N. Karels:
Any assumption in this moment is groundless.
Warm Regards,
A.R.
Dear Andrea Rossi,
With an assumed COP enough high and direct electricity production and light generation, it should be conceptually possible to do the following:
a. Configure the Quark to output light
b. Configure the Quark to output direct electrical power
c. Convert the electrical power into wall power
d. Charge a battery from the wall power
e. Use the battery power to convert to a power form that the Quark can use as an input
f. Power the input of the Quark
If you are able to do all of the above, you should produce a light that will run for a year with no electrical input (other than a start-up power). Would not this be the definitive example of the Rossi Effect? (no input, measured output, for a very long time)
Dear Andrea,
look here at one of the most interesting technologies today, direct air capture (DAC) of carbon dioxide; it’s only a demonstrative plant, but would strongly benefit from LENR competitive electric production:
http://www.canadianbusiness.com/lists-and-rankings/most-innovative-companies/carbon-engineering/
http://www.repubblica.it/ambiente/2016/07/05/news/trasformare_l_inquinamento_dell_aria_in_combustibile_e_la_promessa_di_una_societa_canadese-143401767/?ref=fbpr
Dear Rossi,
I may be wrong but I don’t think that the name Quark is going to stick. People (ordinary people) don’t know what a quark is and the word is too difficult to pronounce. Would you be willing to change the name at some point? I always thought E-Cat X was genius. Or names like E-Cat X Lite to refer to a different size version of the E-Cat X for example.
One day I’m sure there’ll be so many versions of the E-Cat, you’ll probably have a Light only version, electricity only, heat only, heat and light at 50-50 ratio, heat and light at 10-90, Electricity & Light, Electricity & heat at various ratios etc. All these variations will have to be reflected in the name.
Dear mr Rossi,
Did the Customer of the 1MW heat use the heat in some endothermic reaction process?
Dear Andrea Rossi,
Do you think we will see in a video the operation of the next industrial plant by this year ?
Dr Andrea Rossi
On July 4th I saw a guy riding a red bike with a very strange design, wearing a blue fatigue, around 7 p.m. along the bike lane of Ocean Drive ( Miami Beach ): was it you ?
I bet it was you with a friend who says it was not.
Cheers,
Sean
Dear Andrea
I think you saw the last replication of your effect made by Alexander Parkomov : it appears to be very conservative and precise. What do you think ?
Warm Regards,
DT
Nils Fryklund:
If you go to
http://www.leonardocorporation.com
and navigate it thoroughly, you will find the links to all the reports existing about the measurements made with the E-Cats.
You will also find all the replications made by third parties.
Surely in Sweden we are starting a strong activity, therefore it is possible that a seminar will be made.
Warm Regards,
A.R.
Peter Gluck:
Thank you for the link,
Warm Regards,
A.R.
Dear Andrea!
1. Is it not possible to have a report about how the 1MW-plant works before sept 2017?
2. Do you think there will be a seminar in Sweden about E-cat this year?
3. Is it really so hard, as it says, to prove that E-cat works with good COP?
Best regards
Nils Fryklund
Dear Andrea,
My Blog today, fighting for the honor of a good measuring instrument:
http://egooutpeters.blogspot.ro/2016/07/05-jul-2016-again-bit-of-lenr-info.html
I hope many readers will join the action.
warm greetings,
peter
Frank Acland:
1- I think so
2- My report on the quarK is provisional. A real report must come from a different procedure.
3- We are working in the USA for the industrial plants.
Warm Regards
A.R.
Dear Andrea,
You mentioned that there would be more reports coming from the testing of the 1MW plants you are currently making for your first customer.
1. Will the reports be published for the public to read?
2. Will these be third party reports, or will they be internal reports (similar to your short QuarkX report)
3. How long until these reports will be made?
4. How is work going on building these plants?
Thank you,
Frank Acland
Marcellus Zufall:
No.
Warm Regards,
A.R.
Susan Creed:
No comment.
Warm Regards,
A.R.
Dr Rossi,
Questions still remain unanswered.
Why if, as Weaver claims, IH never measured any excess heat, has he collected millions
from his investors in Deep River Venture Capital ** when only your IP was in the portfolio
of his funds, as well as in the Cherokee fund of his partner Tom Darden ?
Thank You
Susan Creed
Dr Andrea Rossi:
Have you ever tried to treat radioactive wastes with your technology to reduce the radioactivity by means of transmutations ?
Thank you,
MZ
G.:
1- Ike Ikegami, Mitsubishi
2- No Comment
Warm Regards,
A.R.
Chantay Wiggin:
Yes. Much work remains to do, though.
Warm Regards,
A.R.
Martin Bellotti:
I never comment the work of our Competitors.
Warm Regards,
A.R.
Steven N. Karels:
Many prototypes self destruct themselves without necessity of us to help them in this purpose… I cannot comment further, before due patent will be filed, to avoid pre-disclosure.
Warm Regards,
A.R.
Johnson Bartberger:
Thank you for your sustain and for the sustain of your friends.
Warm Regards,
A.R.
Dear Andrea Rossi,
After the debate of these last days you got a new follower: me. Talking with my friends about you, got the feeling that the silent maority sustaining you is growing up.
Please continue your great work,
Godspeed,
Johnson
Dear Andrea Rossi,
Have you conducted the test on your new eCat to drive it to self-destruction, similar to what you did with the previous model? If so, any different or unusual results or products?
Dr Rossi
What do you think of the replication of your process made by Brillouin in Washington after their agreement with Industrial Heat ?
Cheers,
Martin
Mr Rossi,
Still promising the QuarkX ? Still approaching Sigma 5 ?
Dear Dr Andrea Rossi,
I know you never comment the work of your competitors, but can you tell us:
1- who are your competitors who are making the most promising work, from your point of view ?
2- who are your competitors that are making the less promising work, from your point of view ?
Thank you if you can answer,
G.
William:
Yes.
Warm Regards,
A.R.
Jose’:
Thank you, the important is that the work of my team is able to produce something really useful.
Warm Regards
A.R.
Dear Andrea,
I was a sceptic against you, but after your struggle against your enemies and the passion of your work I am turning to be a follower.
I liked very much your answer to Frank Acland related to the accusations of IH against you.
Godspeed,
Jose’
Dr Andrea Rossi:
Are you using the stethoscope also for yhe QuarkX ?
William
Peter Gluck:
Thank you for the link,
Warm Regards,
A.R.
Francis:
He,he,he…thank you,
Warm regards,
A.R.
Dear Andrea,,
Here is the edition of EGO OUT for today.
http://egooutpeters.blogspot.ro/2016/07/jul-04-2016-lenr-info-bit-of-dispute.html
Attack by a flowmeter illiterate.. but otherwise OK.
best,
peter
Orsobubu:
The QuarkX are small, but tough.
Warm Regards,
A.R.
Martin Pietsch:
October 31st: yes, it was the plant that eventually has been tested.
November 23rd: in fact the 1 MW plants were for sale at the time; about the domestic, I assumed 2 years would have been enough for the safety certification, but I was wrong. My mistake.
November 28th: yes, we sold it, but later the Customer did not pay the installment that had to be paid at the order. Eventually that same plant has been sold to Industrial Heat.
There are issues that do not depend on me and would need a cristal ball to be foreseen…besides I am sometimes too optimistic, this is a characteristic of mine…and of every inventor.
Warm Regards,
A.R.
WaltC:
about applications in extreme camping situations, if Rossi could be reincarnated back in the XIX century (always a possible LENR utility not to be ruled out), he would have been mentioned by Jules Verne in Journey to the center of the Earth with his Quarks in place of induction coils and Ruhmkorff lamps. The format is so similar that also the classic Levin’s movie should not be re-shooted at all. My only worry is that Quarks are so much tiny and prone in my opinion to break off in salty sands, that I invoke urgently a fix.
http://jules-verne-news.blogspot.it/2012/06/allemagne-la-lampe-de-ruhmkorff-est.html
Dear Dr Rossi:
Thank you for your answer to Frank Acland regarding the B.S. from IH: clear and sound ( your answers, not IH!)
Cheers,
Francis
Dear Mr. Rossi,
here in Germany some statements from earlier are still under discussion:
October 31st, 2011 at 9:01 AM:
We have started the manufacturing of 1 MW plants. Who wants to buy them whatever its Nation, can contact us at:
November 23rd, 2011 at 3:14 PM:
The 1 MW plants are already for sale. The small E-Cats will be for sale within 2 years.
November 28th, 2011 at 6:48 PM:
Today we sold in the USA a 1 MW plant which will go to a normal Customer. This installation will be visitable by the qualified public.
What were the delays at that time and can it happen today also again?
God bless you,
Martin
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today on other posts of this blog.
Warm Regards,
A.R.
Henry:
Thank you and one more time also from me to our Readers !
Warm Regards,
A.R.
Bernie Koppenhofer:
Why, that’s top strategy ! Thank you indeed, and a wonderful July 4th to you and, again, to all our American Readers. This is a very important recurrence.
Warm Regards,
A.R.
Marcia:
Thank you,
Warm Regards,
A.R.
Jack:
Thank you,
Warm Regards,
A.R.
Dr Andrea Rossi:
I too like your answer to Frank Acland, now published also on Ecat World.
Cheers,
Jack
Dear Andrea:
Your answer to Frank Acland makes clear who is lying and who is inventing excuses. It also has been published on EW that the trial has been anticipated to June 2017, which allows to assume that the “motion to fly away” has been botched.
Godspeed.
Marcia
Dr. Rossi: It sounds to me like it would be wise for you to play mixed doubles with you wife as you partner, so she can carry you. Based on the old adage, if you can’t beat them, join them. Have a great 4th of July.