United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

13,804 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Maryana:
    Now, at 11.25 p.m. of Satyrday Nov 21 the 1 MW E-Cat is operating without troubles. The E-Cat X too.
    Warm Regards,
    A.R.

  • Andrea Rossi

    IS
    Thank you!
    Warm Regards,
    A.R.

  • Alberto

    Andrea:
    Those wonderful silhouettes of the 1 MW Ecats in the room that the artist of 3D has imagined are similar to what the 1 MW Ecats will be when you will produce them in series?
    Godspeed,
    Alberto

  • Andrea Rossi

    Ned:
    Matter particles ARE waves, quantistically defined waves: they are discrete vibrations in the fermions fields.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Giuseppe:
    Same psychological mechanism that makes us refer to a boat as a “she”.
    Warm Regards,
    A.R.

  • Thelma

    Dear Andrea:
    When do you think you will work again on the jet engine you were working upon before you had to make this test on the 1 MW Ecat?
    Thelma

  • Stephanie

    Dr Andrea Rossi,
    I saw the interview of Vessela Nikolova with Salvo Mandarà on
    ecat-thenewfire.com
    I liked it. What is your opinion?
    Stephanie

  • Giuseppe

    Andrea,
    I noted that when you talk about the E-Cat X you say “her”, maybe because of the original name “Marie Curie”?
    Regards, Giuseppe

  • Rick

    Mr Rossi Andrea
    Did you have to deal with the problem of the Eddy currents?
    Rick

  • eva

    Dr Andrea Rossi:
    I reach the crowd of the admirers of your US Patent and congratulate with you because it is a milestone.
    Take care of your health for us. 16 hours per day is too much work.
    Cheers,
    Eva

  • Maryana

    Dear Andrea,
    How is going the 1 MW plant?

  • IS

    Dr Andrea Rossi,
    congratulations for your US Patent.
    If something serious will come from LENR it will be from you.
    Godspeed,
    Ileana

  • Andrea Rossi

    Peter Metz:
    Depends on the evolution of the test. Months, anyway: maybe 3-4 months, maybe more.
    Warm Regards,
    A.R.

  • Peter Metz

    Dear Andrea Rossi,

    It’s good to hear that the E-Cat X is still performing well. Roughly how long do you wish to continue to see this performance by the E-Cat X before you decide it is successful embodiment, or is this more a function of other performance parameters besides longevity?

    Thanks for your response.

    Sincerely,

    Peter Metz

  • Andrea Rossi

    Tess Stanley:
    Prof Cook and I continue to work on it; it is not an easy work, because we want to reach a substantial progress under the theoretical point of view, with a substantial mathematical structure. So far we are satisfied of the work done, but conscious of the fact that it still is not mature for publication.
    I am learning strongly from him.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Arnold:
    Let’s hope we’ll spend in the plant a calm week end…now, at07.30 of November 21, the situation is stable for the 1 MW E-Cat, while the E-Cat X is working maintaining her promises, so far.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Tim:
    Thank you for your kind attention to our work.
    Warm Regards,
    A.R.

  • Ned

    Dr Andrea Rossi:
    Are you convinced that matter particles are waves? I can conceive that photons are waves, but how can matter particles be waves?
    Thank you if you can answer,
    Ned

  • Tim

    Mr Andrea Rossi:
    Congratulations for your US Patent. I agree with them who say you made a masterpiece.
    God bless you,
    Tim

  • Arnold

    Dr Andrea Rossi,
    Can we have an update of the 1 MW Ecat and the Ecat X by today?
    Thank you,
    Arnold

  • Tess Stanley

    Dear Andrea Rossi
    How is progressing your theoretical paper with Norman Cook?
    Cheers,
    Tess

  • Andrea Rossi

    Antonio:
    Few minutes ago Leonardo Corp. received an email from Lenr Cars, who apoligized and removed our references from their website.
    We appreciate the apology and for us the case is over.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Antonio:
    The owners of Lenr Cars are totally unknown to us and they have used our photos and our name in their commercial website without any authorization from us. They have not licenses at all from us and our attorneys are pursuing the case. About the other issue: Leonardo Corporation wants not to share its activity with competitors in its Territory under any form, financial or technological. Competition is a war, not a marriage, for the best interest of the Customers.
    Warm Regards,
    A.R.

  • Andrea Rossi

    M.P.:
    Thank you for your attention: yes, that will be probably the design mainframe of the 1 MW E-Cats (F9).
    Warm Regards,
    A.R.

  • Andrea Rossi

    Pekka Janhunen:
    Wrong, there has not been a clear preferential localization of the troubles, if I make a statistic updated today.
    Warm Regards,
    A.R.

  • Antonio

    Dr Andrea Rossi:
    in the site
    http://www.lenr-cars.com
    in the post “Gallery” they put photos of you, of the E-Cats: are they your licensees?
    They are backed by “LENR Invest”, a company that is investing in your competitors: this means you accept to license people that works with your competitors? The situation is a bit confusing, can you clear it up?
    Antonio

  • Steven N. Karels

    Donald Chandler,

    To boil 1 kilogram (or 1 liter) of water takes a certain amount of energy.

    To raise the water from room temperature to 100C takes 334.88 kJ (internet reference)

    To change the 1 kg (100C) water to steam takes 2,261 kJ of energy (internet reference)

    So the total energy needed to convert 1 kg of water from room temperature (20C) to steam is 2,595.88 kJ.

    Total energy required per kilogram of water = 2,595.88 kJ / kg = 2.59588 MJ / kg.

    Total energy used in one hour of operation = 2.59588 MJ / kg * 1,500 kg / hr = 3,893.82 MJ / hr.

    Average Power used to convert 1,500 kg of water to steam = 3,893.82 MJ / hr * 1 hr / 3,600 sec = 1.082 MW.

  • M.P.

    Dr Rossi,
    I liked very much the artistic 3D reproduction published yesterday on
    http://www.leonardocorp1996.com
    wherein a series of 1 MW E-Cat are installed in a room.
    Is this the design that the 1 MW E-Cats will have? If yes, it is wonderful!
    Cheers,
    Miriam

  • Dear Andrea,
    Release of the photo where you are standing inside the container begs the following question: which of the four reactors has had the most problems? My private lawyer, Mr. Murphy, is sure that it’s number one counting from the bottom. He may be right.
    regards, /pekka

  • Elijah

    Mr Andrea Rossi:
    Did you see the experiment of Brillouin in Washington? They replicated your effect with a reactor that seems copied from the Lugano report.
    Godspeed,
    Elijah

  • Andrea Rossi

    Dear Readers:
    New photos and 3D images have been published on
    http://www.leonardocorp1996.com
    Warm Regards,
    A.R.

  • Andrea Rossi

    Martin Aubrey:
    Thank you for your kind attention. Detailed description of the 1 MW E-Cat will follow the end of the tests on course.
    Warm Regards,
    A.R.

  • Martyn Aubrey

    Dear Dr Rossi,

    Thank you for your publication of the computer graphic pictures of the ECAT 1MW Plant design.

    The design is very impressive and the pictures are a wonderful gift to The Readers who continue to support you and your team in your endeavours.

    The graphics show a very interesting equipment layout with the four parallel stacked Tigers fitting neatly into the ISO shipping container.

    From the diagrams; Am I right in assuming that the six red pumps at the near end of each 250kW Tiger module are the cold water inputs to the heating chamber, and that the hot water/steam output(s) are hidden from view at the far end of the cascading run of the 16 reactor cores?

    Well done on your hard work in testing the 1 MW Plant since February this year. You may have encountered teething problems with your first commercial plant, but with great intellect and sheer determination you are overcoming these problems.

    Once your tests are completed (F9), I am sure your great achievement will enable you to go forward and start the major production of your plants, which The World truly needs.

    Kind Regards,
    Martyn Aubrey

  • Andrea Rossi

    Frank Acland,
    Thanks to you for your attention,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Patrick Ellul:
    No.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Donald Chandler:
    Wrong.
    Google ” vaporization heat”, study it, remake the math.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gerard Mc Ek:
    1- wrong
    2- wrong
    3- wrong
    4- premature to answer.
    Warm Regards,
    A.R.

  • Gerard McEk

    Dear Andrea,
    Now you are running with only three tigers, you will not be able to deliver the 1MW. Does it mean that
    1. the test will be extended or
    2. that the customer just gets less kWatts from you?
    3. Also looking at the nice new picture, it seems the tiger contains more (15,16?) smaller Ecats, is that true?
    4. One last question, if I may: When everything goes well, when will the Ecat X test be finished?
    Thanks for keeping your supporters informed.
    Kind regards, Gerard

  • Donald Chandler

    Dear Mr Rossi

    I’m having a problem with your 1 MW ecat spec sheet. It says max 1500 kg of water per hour, raised by about 100 degrees c. So that’s 1,500,000 grams times 100 degrees times 4 joules per gram degree = 600,000,000 joules per hour. Divide by 3600 seconds in an hour to get watts, and the power delivered to the water is about 167 kW, exactly the average electrical INPUT power to the ecat, or COP equals exactly 1 meaning “Rossi Effect” is nil. Surely I must misunderstand. But where? What’s up???

    http://ecat.com/ecat-products/ecat-1-mw/ecat-1mw-technical-data

  • Patrick Ellul

    Dear Andrea.
    On the website ecat.com there is the following description:

    “ECAT 1 MW Plant is made up of 4 modules each containing 16 core reactors. These module produce 250 kW of Heat each.”

    Is this still correct?

    Best regards

  • Frank Acland

    Ok, I see it now. Thank you!

    Frank

  • Andrea Rossi

    Frank Acland:
    Look well these artistic representations: you see the 4 “Tigers” one upon the other. It is the actual configuration of the 1 MW plant.
    Warm Regards,
    A.R.

  • Frank Acland

    Dear Andrea,

    These images of the plant from ecat.com are very well done, but am I correct in thinking that they are of an earlier configuration of the current 1MW plant? You have shown photos which show the four 250 kW “Tiger” reactors, and I believe that is what you are currently using. Is this correct?

    Many thanks,

    Frank Acland

  • Andrea Rossi

    Ronald:
    Thank you for your attention,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Magnus:
    Thank you for the links: here are the images of the E-Cat 1 MW the readers asked for.I leave the Readers make up an opinion about the professionality of this presentation.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stefano Maugeri:
    Thank you for your kind offer, we take advice of.
    Maybe our Readers will be interested to your remarkable computer-graphyc skills too.
    Warm Regards,
    A.R.

  • Gentile Ing. Rossi, ho deciso di appoggiare la sua causa … quindi di qualsiasi lavoro grafico necessita, da pubblicita’ ad immagini tecniche, sezioni di esplosi, design, immagini per cataloghi, o istruzioni di montaggio, logotipi aziendali, ritocchi di fotografie e quant’altro, mi chieda e lo faro’ completamente gratuito …. ripeto non mi deve dare nulla. Voglio dirle che il mondo deve cambiare …. se vogliamo sopravvivere … quindi occorre avere una mentalita’ aperta e comprendere cosa si deve favorire se si vuole vedere un cambiamento … ed io credo che questo averra’ presto ma intanto sta’ in noi cambiare. Quindi ripeto Ing. Rossi qualsiasi lavoro grafico od altro in cui posso aiutarla lo faccio volentieri e gratis. Ripeto gratis.
    Mi faccia sapere ed intanto la ringrazio sperando in un suo riscontro.
    Ho inviato al suo indirizzo di posta una mia imagine che le offro.
    Sempre con grande considerazione e stima Stefano Maugeri.

  • Dear Andrea,

    you can now find the new CAD model on the current ECAT 1 MW plant in operation on ECAT.com,

    http://ecat.com/news/new-cad-model-released-of-ecat-1mw-plant-in-operation

    Best regards,
    Magnus Holm
    Hydro Fusion

  • Andrea Rossi

    Frank Acland:
    Maybe.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Pekka Janhunen:
    Thank you, now I know!
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>