Jack:
Yes, but that for me is archeology…I am focused exclusively on LENR stuff since 2008.
Thank you anyway for offering me a good memory: I made that patent and after that Leonardo Corp manufactured and sold a plant based on that patent. The patent has been co-authored between me and Mr William Dellorfano, who was the owner of the business that eventually used the technology.
Warm Regards,
A.R.
Dear Andrea,
Thank you for your answer to Miguel. Please allow me another question about that:
You must have done this test in the expectation that it would lead to further commercial activities for the Leonardo Company. Is it right to assume that the following test and sold first 1MW plant was a result of that successful preliminary test?
Thank you for answering our questions.
Kind regards, Gerard
Dear Dr Andrea Rossi:
I discovered in the internet that you have been allowed a patent from the USPTO in 2000, precisely the patent US6051110, allowed on April 18th 2000.
The title of the patent is “Thermolytic distillationof carbonaceous material”. It is interesting that in the year 2000 you were working in the USA with your original “Rossi Process” to turn wastes into fuel and you have been granted a patent in the USA for it! This gives further evidence of how your work was serious.
Godspeed,
Jack
Miguel:
Yes, the day you are referring to happened in the Summer of 2011, in a Laboratory connected with NRL. I brought there my E-Cat and they mounted it in a rack of theirs to make their calorimetric measurements. A specialist of NRL measured the electricity consume by means of an oscilloscope of NRL, while several thermocouples set up by them measured the temperature of the water before and after the E-Cat. A flowmeter measured the flow of water. The test during the first day measured a difference of temperature that corresponded to a production of about 1 kWh/h of energy, while after half an hour from the start up ( around 9 A.M.) the system is gone in SSM ( Self Sustained Mode ) and the amount of the input of electricity consumed by the E-Cat has been zero for all the day.
The electricity consumed amount has been measured exclusively by means of the oscilloscope brought there by the specialist of NRL.
This is what happened during that day.
Warm Regards,
A.R.
Dr Andrea Rossi:
Is it true that during a day in 2010 you made a test with the NRL in a laboratory of Washington, DC?
A top level officer of the NRL has written recently that the test was impressive ad that if it was a hoax it was a damn good one!
Can you describe?
Cheers,
Miguel
Dear Andrea,
I am sure you will like beautiful modern cars like almost every Italian. Please read this: http://www.autocar.co.uk/car-news/motor-shows-geneva-motor-show/techrules-turbine-recharging-ev-supercar-confirmed-geneva
The issue is though, that the Cinese seem to have succeded in developing an efficient micro turbine/ generator combination. This in combination with a battery system and six electro motors gives them a car with very interesting properties. (Just look to the fuel consumption of 80 liters for 1200 miles!!)
I am sure that if the QuarkX can be build into this micro turbine the properties of this car will allow you to drive multiple times around the world without refueling (if you can find the time for it). Maybe a chat with the Chinese developers leads to a wonderful future…
Kind regards, Gerard
Dear Dr Andrea Rossi:
I strongly sympathize with you for your enormous effort to bring on the E-Cat and the QuarkX while IH is trying to destroy you and steal your IP.
You seem to me a veritable David against Giliath.
God bless you,
Mariela
When your E-Cats are on the market for massive distribution :
1) will your company be the sole supplier of the E-Cat manufacturers with the necessary fuel ?
2) will your company be the sole buyer of nickel from nickel producers, in order to prepare the fuel for E-Cats ?
3) will the nickel producers have to do some transformations of characteristics you will request on the nickel you will purchase from them ?
4) do you think the price of nickel per unit bought from the nickel producers will be significantly higher than its standard market price due to the transformations made by them ?
5) do you have any idea to what extent for 4) ?
Thank you in advance for your answers,
Best wishes
FM
Anonymous:
In the test of Lugano the reactor had only the caps at the ends made by Durapox. The proper reactor’s cylinder was made by pure alumina. Tha material has been scratched from the surface from the Professors and analyzed, and resulted to be pure alumina.
Warm Regards,
A.R.
Can you elaborate on your recent increase in enthusiasm for us? You mentioned “Very good tests on course”, and “Very good job yesterday.”
Thank you and thank you to your team for all the progress recently!
Warm Regards,
Tom
———————————————————-
**********************************************************
( Posts below that show increase in positive statements …
Andrea Rossi February 16, 2017 at 9:31 AM
No bad news, therefore good news.
Andrea Rossi February 20, 2017 at 7:53 AM
Still on our way toward Sigma 5.
Very good job yesterday.
Andrea Rossi February 20, 2017 at 3:58 PM
Is the COP of the QuarkX substantially higher than the classic E-Cat? Yes
Andrea Rossi February 21, 2017 at 6:12 AM
Very good tests on course.
)
B.:
1- All the Bosons are electrically neutral with exception of the W^+ and the W^-
2- All the Bosons are massless, with exception of the W^+, the W^- and the Z^0: these bosons get mass in the Higgs field.
Warm Regards,
A.R.
Yrka:
Sigma 5 will teach us about the reliability of the QuarkX.
The presentation will be made when we will be ready for it.
I think the trial will end within July-September 2017.
Warm Regards,
A.R.
It is a pity that the trial belates your work.
We can learn something by reaching Sigma 5?
The presentation will be after the trial?
When do you tink the trial will end?
Sincerely and with hope.
Yury Isaev
Engineer
Russia Tyumen
Frank Acland:
I learnt very much from the 4 years I worked with Prof Sergio Focardi, especially in terms of nuclear physics. He also has given to me confiance in myself: before our collaboration I was simply convinced that I had necessarily to be wrong, since nobody agreed with me. The matter of the fact is that initially I simply asked him to explain to me why I was wrong, thinking I did not know that why, but surely there was one.
Probably, without his collaboration I would have not abandoned my traditional work in that period ( make oil and electricity with vegetables ), starting to dedicate 100% of my time to the LENR R&D.
Then, thanks to him we had the possibility to make experiments with ENEL, the main electric power provider of Italy: from ENEL I learnt how to measure the energy produced by a water heating system ( see the first paper Focardi-Rossi ).
Prof Focardi was a giant: Professor of mathematics at the Normale of Pisa, Prof of nuclear physics at the University of Bologna, Dean of Scientific Matters at the University of Bologna, where he founded the Department of the Unibo of Cesena, director of a group at the CERN of Geneva, where he also worked with the Nobel laureate Prof Carlo Rubbia, etc, etc.
Warm Regards,
A.R.
Reading the interview in the link below with Dr. Focardi very is interesting. From what he recounts it sounds like you and he worked very closely for some years. Where do you think your progress with the E-Cat and QuarkX would be at the moment without his contributions?
Dr Rossi,
I noticed that lately you do not attack your foe. Is on course a settlement?
Peter Gluck:
Thank you for your link!
Warm Regards,
A.R.
Dear Andrea,
Thursday edition of the EGO OUT publication:
http://egooutpeters.blogspot.ro/2017/02/feb-23-2017-lenr-3-questions-1-great.html
cheers,
peter
Gerard MkEk:
All the tests we made have been important to us.
Warm Regards,
A.R.
Jack:
Yes, but that for me is archeology…I am focused exclusively on LENR stuff since 2008.
Thank you anyway for offering me a good memory: I made that patent and after that Leonardo Corp manufactured and sold a plant based on that patent. The patent has been co-authored between me and Mr William Dellorfano, who was the owner of the business that eventually used the technology.
Warm Regards,
A.R.
Dear Andrea,
Thank you for your answer to Miguel. Please allow me another question about that:
You must have done this test in the expectation that it would lead to further commercial activities for the Leonardo Company. Is it right to assume that the following test and sold first 1MW plant was a result of that successful preliminary test?
Thank you for answering our questions.
Kind regards, Gerard
Dear Dr Andrea Rossi:
I discovered in the internet that you have been allowed a patent from the USPTO in 2000, precisely the patent US6051110, allowed on April 18th 2000.
The title of the patent is “Thermolytic distillationof carbonaceous material”. It is interesting that in the year 2000 you were working in the USA with your original “Rossi Process” to turn wastes into fuel and you have been granted a patent in the USA for it! This gives further evidence of how your work was serious.
Godspeed,
Jack
JPR:
As a matter of fact, today I am in Manchester, NH, for the litigation, but I have been informed the situation is stable.
Warm Regards,
A.R.
Miguel:
Yes, the day you are referring to happened in the Summer of 2011, in a Laboratory connected with NRL. I brought there my E-Cat and they mounted it in a rack of theirs to make their calorimetric measurements. A specialist of NRL measured the electricity consume by means of an oscilloscope of NRL, while several thermocouples set up by them measured the temperature of the water before and after the E-Cat. A flowmeter measured the flow of water. The test during the first day measured a difference of temperature that corresponded to a production of about 1 kWh/h of energy, while after half an hour from the start up ( around 9 A.M.) the system is gone in SSM ( Self Sustained Mode ) and the amount of the input of electricity consumed by the E-Cat has been zero for all the day.
The electricity consumed amount has been measured exclusively by means of the oscilloscope brought there by the specialist of NRL.
This is what happened during that day.
Warm Regards,
A.R.
Dr Andrea Rossi:
Is it true that during a day in 2010 you made a test with the NRL in a laboratory of Washington, DC?
A top level officer of the NRL has written recently that the test was impressive ad that if it was a hoax it was a damn good one!
Can you describe?
Cheers,
Miguel
Update?
JPR:
Still great,
Warm Regards,
A.R.
Peter Gluck:
Thank you for your link,
Warm Regards,
A.R.
Dear Andrea,
New blog issue for today:
http://egooutpeters.blogspot.ro/2017/02/feb-22-2017-architect-could-not-build.html
warmest greetings,
peter
Update?
Gerard McEk:
Thank you for the information, but all this is at a concept level.
Warm Regards
A.R.
Dear Andrea,
I am sure you will like beautiful modern cars like almost every Italian. Please read this:
http://www.autocar.co.uk/car-news/motor-shows-geneva-motor-show/techrules-turbine-recharging-ev-supercar-confirmed-geneva
The issue is though, that the Cinese seem to have succeded in developing an efficient micro turbine/ generator combination. This in combination with a battery system and six electro motors gives them a car with very interesting properties. (Just look to the fuel consumption of 80 liters for 1200 miles!!)
I am sure that if the QuarkX can be build into this micro turbine the properties of this car will allow you to drive multiple times around the world without refueling (if you can find the time for it). Maybe a chat with the Chinese developers leads to a wonderful future…
Kind regards, Gerard
Mariela:
Thank you for your sympathy.
Warm Regards,
A.R.
Frederic Maillard:
1- no
2- no
3- no
4- no
5- no
Warm Regards,
A.R.
Dear Dr Andrea Rossi:
I strongly sympathize with you for your enormous effort to bring on the E-Cat and the QuarkX while IH is trying to destroy you and steal your IP.
You seem to me a veritable David against Giliath.
God bless you,
Mariela
Dear Dr Rossi,
When your E-Cats are on the market for massive distribution :
1) will your company be the sole supplier of the E-Cat manufacturers with the necessary fuel ?
2) will your company be the sole buyer of nickel from nickel producers, in order to prepare the fuel for E-Cats ?
3) will the nickel producers have to do some transformations of characteristics you will request on the nickel you will purchase from them ?
4) do you think the price of nickel per unit bought from the nickel producers will be significantly higher than its standard market price due to the transformations made by them ?
5) do you have any idea to what extent for 4) ?
Thank you in advance for your answers,
Best wishes
FM
Peter Gluck:
Thank you for your link,
Warm Regards
A.R.
Dear Andrea,
This is the posting for today on EGO OUT:
http://egooutpeters.blogspot.ro/2017/02/feb-21-2017-about-negative-energies-in.html
Warm regards,
Peter
Tom Conover:
We have made tests of work with actual heat exchangers and I am very pleased with the results. Very, very pleased.
Warm Regards,
A.R.
Anonymous:
In the test of Lugano the reactor had only the caps at the ends made by Durapox. The proper reactor’s cylinder was made by pure alumina. Tha material has been scratched from the surface from the Professors and analyzed, and resulted to be pure alumina.
Warm Regards,
A.R.
Dear Andrea,
Can you elaborate on your recent increase in enthusiasm for us? You mentioned “Very good tests on course”, and “Very good job yesterday.”
Thank you and thank you to your team for all the progress recently!
Warm Regards,
Tom
———————————————————-
**********************************************************
( Posts below that show increase in positive statements …
Andrea Rossi February 16, 2017 at 9:31 AM
No bad news, therefore good news.
Andrea Rossi February 20, 2017 at 7:53 AM
Still on our way toward Sigma 5.
Very good job yesterday.
Andrea Rossi February 20, 2017 at 3:58 PM
Is the COP of the QuarkX substantially higher than the classic E-Cat? Yes
Andrea Rossi February 21, 2017 at 6:12 AM
Very good tests on course.
)
Dear Dr Andrea Rossi,
In the reactor of Lugano the reactor was made by Durapox?
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published in other posts of this blog.
Warm Regards,
A.R.
JPR:
Very good tests on course.
Warm Regards,
A.R.
B.:
1- All the Bosons are electrically neutral with exception of the W^+ and the W^-
2- All the Bosons are massless, with exception of the W^+, the W^- and the Z^0: these bosons get mass in the Higgs field.
Warm Regards,
A.R.
Dr Andrea Rossi:
Do exist Bosons with electric charge and with mass?
Cheers,
B.
Update?
Patrick:
Yes,
Warm regards,
A.R.
Yrka:
Sigma 5 will teach us about the reliability of the QuarkX.
The presentation will be made when we will be ready for it.
I think the trial will end within July-September 2017.
Warm Regards,
A.R.
Moon:
Yes,
Warm Regards,
A.R.
Peter Gluck:
Thank you for your link,
Warm Regards,
A.R.
Dear Andrea,
The first blog issues for this week:
http://egooutpeters.blogspot.ro/2017/02/feb-20-2017-lenr-theoryplex-discussions.html
My very best wishes,
Peter
Dear Dr Andrea Rossi:
Do you think the role of the mass media will be important for the future of your technology?
Cheers,
Patrick
Dear Dr Andrea Rossi:
Is the COP of the QuarkX substantially higher than the classic E-Cat?
Cheers,
Moon
Dear Dr. Andrea Rossi.
It is a pity that the trial belates your work.
We can learn something by reaching Sigma 5?
The presentation will be after the trial?
When do you tink the trial will end?
Sincerely and with hope.
Yury Isaev
Engineer
Russia Tyumen
Frank Acland:
I learnt very much from the 4 years I worked with Prof Sergio Focardi, especially in terms of nuclear physics. He also has given to me confiance in myself: before our collaboration I was simply convinced that I had necessarily to be wrong, since nobody agreed with me. The matter of the fact is that initially I simply asked him to explain to me why I was wrong, thinking I did not know that why, but surely there was one.
Probably, without his collaboration I would have not abandoned my traditional work in that period ( make oil and electricity with vegetables ), starting to dedicate 100% of my time to the LENR R&D.
Then, thanks to him we had the possibility to make experiments with ENEL, the main electric power provider of Italy: from ENEL I learnt how to measure the energy produced by a water heating system ( see the first paper Focardi-Rossi ).
Prof Focardi was a giant: Professor of mathematics at the Normale of Pisa, Prof of nuclear physics at the University of Bologna, Dean of Scientific Matters at the University of Bologna, where he founded the Department of the Unibo of Cesena, director of a group at the CERN of Geneva, where he also worked with the Nobel laureate Prof Carlo Rubbia, etc, etc.
Warm Regards,
A.R.
Kop:
I cannot give information about any issue connected with what has to be disclosed in Court.
Warm Regards,
A.R.
JPR:
Still on our way toward Sigma 5.
Very good job yesterday.
Warm Regards,
A.R.
Update?
Dear Dr Andrea Rossi:
Will the ERV be deposed as a witness in the litigation?
Cheers,
Kop
Dear Andrea,
Reading the interview in the link below with Dr. Focardi very is interesting. From what he recounts it sounds like you and he worked very closely for some years. Where do you think your progress with the E-Cat and QuarkX would be at the moment without his contributions?
Many thanks,
Frank Acland
Dear Stacey,
Here is the link you are looking for:
http://22passi.blogspot.com/2011/04/sergio-focardi-father-of-ni-h-cold.html
Kind regards,
Frank Acland
Peter Gluck:
Thank you for your link,
Warm Regards,
A.R.
Dear Andrea,
SUNDAY i.e. weekend-en edition of my
EGO OUT blog:
http://egooutpeters.blogspot.ro/2017/02/feb-19-2017-professional-approach-to.html
Wishing you an readers an excellent coming week,
Peter
Domenico Canino:
Can you send here a comment with the link to the interview on 22passi of Prof. Sergio Focardi?
Thank you,
Stacey