Dr. Rossi, What is Vasaloppet ?
I had to look it up.
Vasaloppet is Swedish for “The Vasa Race.” is an annual long distance cross-country Ski
Race held on the first Sunday of March.
The 90km, (56 mile) Course is in Northwestern Sweden. It is the oldest and longest
cross-country Ski Race in the World, as well as the one with the highest number of
Participants, 15,800 and Attendance 70,200.
Robert Curto
Ft. Lauderdale Florida
USA
Sven:
Yes, the manufacturing will be made in the USA and in Sweden.
I hope to make the Vasaloppet next year!
Thank you for your kind words.
Warm Regards,
A.R.
Dear Dr Andrea Rossi:
I am very glad that you have chosen Sweden for the manufacturing of your products for Europe. In Sweden you have a strong support, as I can see among my friends.
I remember you wrote here long time ago you wanted to make the Vasaloppett…next year, maybe?
Godspeed,
Sven
You projected a refueling cost of $0.01 per kW and also stated that refueling would be done once per year.
Assuming a conventional Carnot cycle electricity production plant of 1GW output capacity and a 40% Carnot efficiency means 2.5GW of thermal power generation. This suggests an annual fuel cost of $25,000. During that year, the plant, running continuously, would product 8,760 GWhr of electricity. Or about $3 per GWhr for fuel cost only. Obviously, other costs would add onto the actual delivered price. This assumes a very high COP so that no significant amount of output electricity is diverted to feed the input power.
Paul:
We consider it irrelevant to be conservative, we put at the denominator of the COP the whole energy consumed by the QuarkX, but obviously some heat is dissipated; I measured a 2% loss.
Warm Regards,
A.R.
Prof:
Good question, obviously related to the COP measurements.
We have chosen a specific oil of Shell that has a precise data sheet supplied by the manufacturer.
Warm Regards,
A.R.
Dr Andrea Rossi:
The puppets of the ventriloquist of Raleigh are continuing to talk in the blogs of your past, which makes two considerations pop up:
First consideration: they use your past because they have not real evidence against you for the litigation, otherwise they would not lose time for archeology (they cite events of 25 years and more ago)
Second: you have been completely cleared from your taxes issues in Italy and from all the accusations that caused you to go in jail and they know it, but pretend not to know to try to assassinate your character with fraudolent biased journalism
Third: being the ventriloquist Tom Darden and the pious JT Vaughn so obstentatiously gracious guys, they should read the Gospel where Jesus says “Why beholdest thou the mote that is in thy brother’s eye, but considerest not the beam that is in thine own eye?”: I invite the Ventriloquist and the Pious to read the comment sent to this blog from Hugh H. Maguire about a week ago, where are reported the links to the criminal customary activity of Cherokee, that is the mother of Industrial Heat: there we can see that also the “charity” organizations of Cherokee are covers for criminal activity. I am sure that more investigation on this specific issue could reserve stunning surprises.
And to them who want to know the real story about your past, I suggest to go to http://www.ingandrearossi.com
Godspeed,
Ing. Carlo Antonini
Dear Dr Andrea Rossi:
How much you think will cost the QuarkX tech per kW installed?
1- more than 1000 $
2- between 1000 and 500 $
3- between 300 and 500 $
4- less than 300 $
Dr Andrea Rossi:
Reading all the published papers of the litigation it seems your foe has brought no evidence at all for the reason they did not pay you and, on the contrary, you gave a lot of evidence of the fact that they have to pay you. I bet you will answer “no comment”.
Cheers,
Frankie
Mr Rossi,
Don’t you think the classic “hot fusion” will be put in the market before your Ecat, after the interview released by ENEA about the fact that they already obtained the plasma?
Steven N. Karels:
Thank you for your suggestion. I am not able to answer, because we did not experiment this particular application, yet.
Warm Regards,
A.R.
Commercial hydrogen production might be a future application for eCat technology. Using a Sulphur – Iodine cycle and 950 degC thermo source (i.e., an eCat reactor), hydrogen can be produced from water with the Sulphur Iodine being reused. So, at first glance, the eCat technology appears feasible. Perhaps an application in future cars, with hydrogen storage within the vehicle or at the filling stations?
You posted “substitution” for refueling an eCat reactor module. Do you envision:
a. a throw away reactor (like a light bulb) or
b. is it returned to the eCat factory for refurbishment and refueling (similar to an automotive battery)?
c. Or does this depend on the size of the eCat reactor unit (20W, 100W, 1kW, 10kW)?
Arjen:
All that mess to produce hydrogen from water? You can do the same with electrolysis ! I did it with a battery and a glass of water ( 2 $ ). Obviously the issue is how much energy is consumed to separate hydrogen from oxygen, but what you are linking to seems all but energy saving. It looks fit to produce funds from the taxpayer more than energy. With all respect.
Warm Regards,
A.R.
Are you also looking into this possibility , to use the heat of the quarkx to produce hydrogen?
or maybe they could use the heat of the quarkx to implement in their system?
Dr Joseph Fine:
It has moved enough.
Warm Regards,
A.R.
Dear Andrea Rossi,
It may be time to think about how to show Specific Power (W/kg) and Specific Energy (J/kg) of the QuarkX on a Ragone plot.
Is it reasonable to predict that the “Red Dot” of the “Ragone plot” has moved a lot?
Poetic regards,
Joseph Fine
Robert Curto:
Correct. I am a decent cross country skier.
Warm Regards,
A.R.
Dr. Rossi, What is Vasaloppet ?
I had to look it up.
Vasaloppet is Swedish for “The Vasa Race.” is an annual long distance cross-country Ski
Race held on the first Sunday of March.
The 90km, (56 mile) Course is in Northwestern Sweden. It is the oldest and longest
cross-country Ski Race in the World, as well as the one with the highest number of
Participants, 15,800 and Attendance 70,200.
Robert Curto
Ft. Lauderdale Florida
USA
Sven:
Yes, the manufacturing will be made in the USA and in Sweden.
I hope to make the Vasaloppet next year!
Thank you for your kind words.
Warm Regards,
A.R.
Dear Dr Andrea Rossi:
I am very glad that you have chosen Sweden for the manufacturing of your products for Europe. In Sweden you have a strong support, as I can see among my friends.
I remember you wrote here long time ago you wanted to make the Vasaloppett…next year, maybe?
Godspeed,
Sven
Frank Acland:
Yes.
Warm Regards,
A.R.
Dear Andrea,
Have you already designed and built the testing setup that you plan to use in the presentation of the QuarkX?
Thank you,
Frank Acland
Steven N. Karels:
Thank you for your insight.
Warm Regards,
A.R.
@Ing Antonini:
We of the silent majority agree with you.
Cheers,
Aninymous
Dear Andrea Rossi,
You projected a refueling cost of $0.01 per kW and also stated that refueling would be done once per year.
Assuming a conventional Carnot cycle electricity production plant of 1GW output capacity and a 40% Carnot efficiency means 2.5GW of thermal power generation. This suggests an annual fuel cost of $25,000. During that year, the plant, running continuously, would product 8,760 GWhr of electricity. Or about $3 per GWhr for fuel cost only. Obviously, other costs would add onto the actual delivered price. This assumes a very high COP so that no significant amount of output electricity is diverted to feed the input power.
Paul:
We consider it irrelevant to be conservative, we put at the denominator of the COP the whole energy consumed by the QuarkX, but obviously some heat is dissipated; I measured a 2% loss.
Warm Regards,
A.R.
Andrea,
What percentage of the input power is consumed by the ballast resistor?
Paul
Ing. Michelangelo De Meo:
Thanks for the link,
Warm Regards,
A.R.
Comparing Energy Sources
http://lenrftw.net/comparing_energy_sources.html#.WRr4rsm1tuV
Prof:
Good question, obviously related to the COP measurements.
We have chosen a specific oil of Shell that has a precise data sheet supplied by the manufacturer.
Warm Regards,
A.R.
Russell:
Not yet, but it’s surely enough.
Warm Regards,
A.R.
Ing. Antonini:
No comment.
Warm Regards,
A.R.
JPR:
Also today is a good day, thanks to God…still on our wat toward Sigma 5.
Warm Regards,
A.R.
Update?
Dr Andrea Rossi:
The puppets of the ventriloquist of Raleigh are continuing to talk in the blogs of your past, which makes two considerations pop up:
First consideration: they use your past because they have not real evidence against you for the litigation, otherwise they would not lose time for archeology (they cite events of 25 years and more ago)
Second: you have been completely cleared from your taxes issues in Italy and from all the accusations that caused you to go in jail and they know it, but pretend not to know to try to assassinate your character with fraudolent biased journalism
Third: being the ventriloquist Tom Darden and the pious JT Vaughn so obstentatiously gracious guys, they should read the Gospel where Jesus says “Why beholdest thou the mote that is in thy brother’s eye, but considerest not the beam that is in thine own eye?”: I invite the Ventriloquist and the Pious to read the comment sent to this blog from Hugh H. Maguire about a week ago, where are reported the links to the criminal customary activity of Cherokee, that is the mother of Industrial Heat: there we can see that also the “charity” organizations of Cherokee are covers for criminal activity. I am sure that more investigation on this specific issue could reserve stunning surprises.
And to them who want to know the real story about your past, I suggest to go to http://www.ingandrearossi.com
Godspeed,
Ing. Carlo Antonini
Dear Dr Andrea Rossi:
Can you tell us what is the COP of the QuarkX?
I didn’t understand it, yet.
Cheers,
Russell
Dr Andrea Rossi:
Are the specific heat and the density of the oil you are using as a fluid to cool down the QuarkX certan and precisely measured?
Brokeeper:
No comment,
Warm Regards,
A.R.
Dear Andrea,
To their dismay it’s not a cat but a tiger’s tail IH is holding running around in circles in an attempt from being eaten. 🙂
Brokeeper
Abram:
No comment.
Warm Regards
A.R.
Dr Rossi,
Can you agree with this Statement:
Rossi knows his technology works and along the way
found out that IH are a bunch of unreliable guys
that wanted to ditch him sooner or later?
Franklin Poehler:
We’ll see. ( We will be first by far ).
Warm Regards,
A.R.
Calvin Tell:
Yes.
Warm Regards,
A.R.
Frankie:
No comment ( you won the bet ).
Warm Regards,
A.R.
Dear Dr Andrea Rossi:
How much you think will cost the QuarkX tech per kW installed?
1- more than 1000 $
2- between 1000 and 500 $
3- between 300 and 500 $
4- less than 300 $
Dr Andrea Rossi:
Reading all the published papers of the litigation it seems your foe has brought no evidence at all for the reason they did not pay you and, on the contrary, you gave a lot of evidence of the fact that they have to pay you. I bet you will answer “no comment”.
Cheers,
Frankie
Dear Dr Rossi,
Do you think that your effect will be able to be applied to ships?
Mr Rossi,
Don’t you think the classic “hot fusion” will be put in the market before your Ecat, after the interview released by ENEA about the fact that they already obtained the plasma?
Prof:
No.
Warm Regards,
A.R.
JPR:
Still on our way toward Sigma 5.
Warm Regards,
A.R.
Steven N. Karels:
b.
Warm Regards,
A.R.
Steven N. Karels:
Thank you for your suggestion. I am not able to answer, because we did not experiment this particular application, yet.
Warm Regards,
A.R.
Dear Andrea Rossi,
Commercial hydrogen production might be a future application for eCat technology. Using a Sulphur – Iodine cycle and 950 degC thermo source (i.e., an eCat reactor), hydrogen can be produced from water with the Sulphur Iodine being reused. So, at first glance, the eCat technology appears feasible. Perhaps an application in future cars, with hydrogen storage within the vehicle or at the filling stations?
Dear Andrea Rossi,
You posted “substitution” for refueling an eCat reactor module. Do you envision:
a. a throw away reactor (like a light bulb) or
b. is it returned to the eCat factory for refurbishment and refueling (similar to an automotive battery)?
c. Or does this depend on the size of the eCat reactor unit (20W, 100W, 1kW, 10kW)?
Update?
Dear Dr Andrea Rossi:
The comment of Hugh H. Maguire is important. Can you make a comment on it not related to what will be discussed in Court?
Arjen:
All that mess to produce hydrogen from water? You can do the same with electrolysis ! I did it with a battery and a glass of water ( 2 $ ). Obviously the issue is how much energy is consumed to separate hydrogen from oxygen, but what you are linking to seems all but energy saving. It looks fit to produce funds from the taxpayer more than energy. With all respect.
Warm Regards,
A.R.
Dear andrea
seems like hydrogen can be distracted from water with high temperatures
see http://www.iflscience.com/technology/scientists-in-germany-switched-on-the-worlds-largest-artificial-sun/
Are you also looking into this possibility , to use the heat of the quarkx to produce hydrogen?
or maybe they could use the heat of the quarkx to implement in their system?
kind regards arjen
Frank Acland:
1- one year
2- substitution
3- premature
Warm Refards
A.R.
Lars Lindberg:
We must wait the end of the R&D on the Quarkx.
Warm Regards
A.R.
Dear Andrea,
Have you decided what the first mass produced products will be?
Dear Andrea,
How long do you theorize that a QuarkX can operate without the need for refueling?
When the time for refueling comes, will a QuarkX actually be refueled, or just replaced with a new unit?
What do you currently project that the cost of a 1MW QuarkX plant will be, once mass production begins?
Thank you,
Frank Acland
James:
Thank you for the suggestion.
Warm Regards,
A.R.
Steven N. Karels:
The refueling cost could be around 1 cent/kW, but these are still projections with a wide margin of error.
Warm Regards,
A.R.