With reference to Question 8 of my previous message, I meant that if you can control the COP, by adjusting temperature, pressure , power level etc., maybe you could set up the COP (Coefficient of performance) to be a significant number. For example, if the COP were 5.0, it could indicate Sigma 5; if the COP were 11.24, it would indicate the date 11/24 or the European version COP = 24.11. And even, if the COP were set up to be 12.25, it would be an early wish for a Merry Christmas.
Anyway that was not an important question. More of a fun question.
Dr Joseph Fine:
1- the description will be given during the test
2- it will work at 30% of its power
3- see 1
4- see 1
5- the attendants will have to bring up their cups from home and put a name on them otherwise they will be stolen ( the cups, not the attendants ) and if they will want to wash the cups, they will receive the bills for the consumption of the water ( so much precious, after the global warming stuff ); if they think will get hungry, not even think they will find food, albeit we will allow them to put on the floor clean sheets to picnic on them the food from home.
6- fingers crossed
7- see 1
8- I do not understand: can you rephrase?
Warm Regards,
A.R.
Dear Andrea,
I know you have been looking for jets to be driven by ECat QX. Today I heard Siemens is closing factories producing industrial gas turbines. This closing of factories is very costly, so I would assume that they may be interested to find a new task for turbines. Maybe they are interested in a test with the ECat QX?
Kind regards, Gerard
1) Next week, will you be demonstrating a single 20 W E-Cat QX module or a unit with 3 QX Modules?
2) Will the unit be set to output at full power or nominal power, e.g. 5-10%?
3) During the demo, do you expect there will be a time interval when the unit will be in Self Sustaining Mode?
4) Do you plan to change the output temperature during the demo? (e.g. constant T, ramp up T, constant, ramp down, constant)
5) Will you provide teacups for attendees (showing the E-Cat CAN produce hot tea), or will they have to bring their own cups?
6) Congratulations in advance!!!!
7) Will core temperature be recorded and shown? (e.g. 500 deg C, 800 deg C, etc.)
8) Can you set the COP so it will be related to the date? For example, COP = 11.24, 112.4 or 1,124 ? Perhaps even 2,018?
We are all looking forward to the public presentation in a few days. When you mentioned that there would be a Nobel prize winner in attendance, I was even more excited for you. Has more than one qualified nominator been invited to attend your presentation?
Qualified Nominators
The right to submit proposals for the award of a Nobel Prize in Physics shall,
by statute, be enjoyed by:
1. Swedish and foreign members of the Royal Swedish Academy of Sciences;
2. Members of the Nobel Committee for Physics;
3. Nobel Laureates in Physics;
4. Tenured professors in the Physical sciences at the universities and
institutes of technology of Sweden, Denmark, Finland, Iceland and Norway,
and Karolinska Institutet, Stockholm;
5. Holders of corresponding chairs in at least six universities or
university colleges (normally, hundreds of universities) selected by the
Academy of Sciences with a view to ensuring the appropriate distribution
over the different countries and their seats of learning; and
6. Other scientists from whom the Academy may see fit to invite proposals.
Robert Curto:
On the contrary, I am deeply grateful to all the Readers that wish us Good Luck!
Remember the commander of the Titanic who said “We do not need the help of God because this ship is unsinkable” ?
Warm Regards,
A.R.
Dr. Rossi, some people are wishing you, Good Luck, which is very kind of them.
I am not going to wish you Good Luck.
Because you are not going to need it.
All the effort of You and your Brilliant Team is going to pay off, big time.
Robert Curto
Ft. Lauderdale, Florida
USA
Yrka:
The names of the invited persons will not be made public. After the demo, every attendant will be free to disclose her/his attendance if she/he will do it.
Questions to me about the demo after it will have been put in the internet can also be sent to this blog or to http://www.leonardocorporation.com
Warm Regards,
A.R.
Dear Dr. Andrea Rossi,
is someone from Russia invited to the presentation?
Maybe Vitaly Uzikov, Irina Uzikova, Alexander Parkhomov?
You announced the broadcast of the presentation on http: //www.ecat.com, this will cause a heated discussion, do not you plan to open a blog there?
Have any Nobel prize winners been invited to the 24 November demonstration of the ECAT Qx? If so, more than 1? I’m looking forward to this event after following developments since the Bologna University demonstration. Have a great Thanksgiving and a very successful demo.
Dear AR,
Thank you for setting up your demonstration for us all to see. Should we expect the QuarkX to be run at less than maximum – to make an error free demo almost certain?
regards,
Greg Leonard
TO ALL THE PERSONS THAT HAVE BEEN INVITED TO ATTEND TO THE DEMO OF NOVEMBER 24TH:
PLEASE BRING WITH YOU AN ID, BECAUSE THE SECURITY WILL CHECK THE NAMES OF THE LIST TO ALLOW TO ENTER.
PLEASE BE IN THE PLACE AT 9.30 A.M.
Warm Regards,
A.R.
Giannino Ferro Casagrande:
NO! The streaming will be after 12 P.M., Miami Time, which means after noon in Miami, Florida ( 12 A.M. would be midnight! ).
Warm Regards,
A.R.
Forse la risposta a Gianluca è :” 12 AM ” !!! Sul sito : ” http://www.eca.ccom ” ??? Chiarisci caro Andrea . Giannino da Udin . E FORZA !!!
English:
is perhaps the answer to Gianluca 12 AM?
Dear Andrea,
I am sure that many look forward to the E-cat QX presentation 11/24 after 12 o’clock Miami, Florida time.
Can you give some impression of what will be revealed. I read you will tell about the status of the theory you are developing.
1. Will you explain which reactions are taking place, how it is possible that the Coulomb barrier is overcome and why no radiation is measured?
2. Will you explain which reaction(s) produce the heat/light/electricity?
3. Will you reveal the minimum and maximum COP?
4. Will you reveal details about the way the QX is being controlled (on/off or in some analogue way like: off- cool- warmer- warm- hot- very hot-)
5. Will you explain how heat should be removed from the QX (with water, steam, air, inert gas, liquid metal; using natural flow, pumps, fans)
6. Will you explain how a cluster can be controlled?
7. Will you tell how far you are with your R&D in integrating the QX into an apparatus like a jet, hot air machine or whatever?
8. Will you give an impression how you see the world adapting to the E-cat QX (industrial processes, room heating, automotive and aerospace) including a prognosis of its assumed development (quantities, integration in society)?
9. Will you also reveal aspects of the QX that have never been mentioned?
10. Will you reveal how the operational details of the QX (operational life, refill fuel or replace QuarkX -clusters, maintenance requirements, safety aspects etc. etc.)
I know I ask a lot, but you know, we have been waiting so long for this and these questions are just some of the many more details where we have been waiting for.
I hope the demonstration will be great. Good luck to you and your team
Kind regards, Gerard
I do not know if you realize that day sigma 5 was reached it was Saint Martins day 11 November.
Children in the Netherlands go around the houses with a self made light!
“Saint Martin of Tours was a Roman soldier who was baptised as an adult and became a monk. The most famous legend concerning him was that he had once cut his cloak in half to share with a beggar during a snowstorm, to save the latter from the cold. That night, he dreamt of Jesus, wearing the half-cloak and saying to the angels, “Here is Martin, the Roman soldier who is now baptised; he has clothed me.” [4] Saint Martin died on November 8, 397.”
Regarding Gabriel Berra’s post:
= = = = = = = = =
Gabriel Berra
November 11, 2017 at 5:04 PM
Dear Andrea, Congratulations on sigma 5 ! For the industrialization phase I imagine starting with the production of the Ecat QX as a heater will be the first priority. There is a trillion dollar market for heat and steam. A greater proportion of the $8 trillion annual global energy market is used on heat than transport or electricity generation. 3/4 of this heat is from fossil fuels. Generation of electricity will be a natural evolution of the device but generating heat will be enough to validate your technology and to generate whatever income you and your partners are hoping to achieve. Others can then adapt your technology for electricity generation and transport. Once again – congratulations and good luck.
– – – – –
Andrea Rossi
November 11, 2017 at 8:57 PM
Gabriel Berra:
Thank you for your insight, that I share.
Warm Regards,
A.R.
= = = = = = = =
And specifically with reference to: ” ……. generating heat will be enough to validate your technology and to generate whatever income you and your partners are hoping to achieve. …..” I would like to add that:
Most importantly, it will provide the financial wherewithal needed to support the cost of the research and development efforts required to bring all the other applications speedily to reality. Which everyone on the planet, if they know about it, is looking forward to.
Dear Andrea
With no answer to 1, does this mean you now have found a theoretical explanation how this heat occurs, and by this the heat may no longer be regarded as anomalous?
Will such a theory be presented at the demo?
Best regards Svein Henrik
Gian Luca and All Readers:
The streaming of the demonstration of the E-Cat QX will start around noon (12 P.M.) of November 24th, Miami time.
It will be available on http://www.ecat.com
Warm Regards,
A.R.
Dear Andrea.
Congratulations for achieving Sigma 5. I am unsure what this compromise.
Do it means that this super high security counts for:
1. The observation of an anomalous heat is real?
2. The COP of the heat is higher than 6?
3. Or COP is higher than 50?
4. The QX tested, will supply 20W continuously in a year?
5. The QX do function totally at least in 8760 hours with an interrupted use?
6. The QX will function in 10 years with 10% intermittent?
7. A robotic production will be of the same quality or better?
8. The possibility to control the units?
9. No harmful radiation is present?
10. No risk for run off or melt down?
11. Or all the 10 above?
I hope you may answer 11 and this is a result of all the different tests you have performed.
Best wishes for the demo and a soon coming mass production as the world is full of “San Tommaso Apostolo”.
Regards Svein Henrik.
Dr. Rossi, I’m afraid that because of the need to keep Quark X running secret, the result of the demo will remain in the end obscure and incomplete, and this will cause many doubts and criticisms to many observers.
However, I am aware that this is not very important, because the main priority is to convince potential investors and partners. Am I wrong?
Best Regards,
Italo R.
Dear Andrea Rossi,
With reference to Question 8 of my previous message, I meant that if you can control the COP, by adjusting temperature, pressure , power level etc., maybe you could set up the COP (Coefficient of performance) to be a significant number. For example, if the COP were 5.0, it could indicate Sigma 5; if the COP were 11.24, it would indicate the date 11/24 or the European version COP = 24.11. And even, if the COP were set up to be 12.25, it would be an early wish for a Merry Christmas.
Anyway that was not an important question. More of a fun question.
Significant regards,
Joseph Fine
Dr Joseph Fine:
1- the description will be given during the test
2- it will work at 30% of its power
3- see 1
4- see 1
5- the attendants will have to bring up their cups from home and put a name on them otherwise they will be stolen ( the cups, not the attendants ) and if they will want to wash the cups, they will receive the bills for the consumption of the water ( so much precious, after the global warming stuff ); if they think will get hungry, not even think they will find food, albeit we will allow them to put on the floor clean sheets to picnic on them the food from home.
6- fingers crossed
7- see 1
8- I do not understand: can you rephrase?
Warm Regards,
A.R.
Costas Maimaris:
Likewise to you,
Warm Regards,
A.R.
Gerard McEk:
Thank you for the suggestion.
Warm Regards,
A.R.
Dear Andrea,
I know you have been looking for jets to be driven by ECat QX. Today I heard Siemens is closing factories producing industrial gas turbines. This closing of factories is very costly, so I would assume that they may be interested to find a new task for turbines. Maybe they are interested in a test with the ECat QX?
Kind regards, Gerard
Dear Andreas,
All the Best to You!
Warm Regards
Costas
Dear Andrea Rossi,
If you can answer,
1) Next week, will you be demonstrating a single 20 W E-Cat QX module or a unit with 3 QX Modules?
2) Will the unit be set to output at full power or nominal power, e.g. 5-10%?
3) During the demo, do you expect there will be a time interval when the unit will be in Self Sustaining Mode?
4) Do you plan to change the output temperature during the demo? (e.g. constant T, ramp up T, constant, ramp down, constant)
5) Will you provide teacups for attendees (showing the E-Cat CAN produce hot tea), or will they have to bring their own cups?
6) Congratulations in advance!!!!
7) Will core temperature be recorded and shown? (e.g. 500 deg C, 800 deg C, etc.)
8) Can you set the COP so it will be related to the date? For example, COP = 11.24, 112.4 or 1,124 ? Perhaps even 2,018?
Looking forward to the demo,
Joseph Fine
JPR:
Totally focused on the preparation of the demo. We are at the count down: -7!
Warm Regards,
A.R.
Robert Curto:
Thank you for the information,
Warm Regards,
A.R.
Dr. Rossi, Google:
TESLA ELECTRIC TRUCK WIRED
Click On:
Elon Musk Reveals Tesla’s Electric Semitruck Wired
Robert Curto
Ft. Lauderdale Florida
USA
Update?
Tom Conover:
Sorry, I cannot answer these questions.
Warm Regards,
A.R.
Dear Andrea,
We are all looking forward to the public presentation in a few days. When you mentioned that there would be a Nobel prize winner in attendance, I was even more excited for you. Has more than one qualified nominator been invited to attend your presentation?
Best Wishes to you,
Tom
——–
https://www.nobelprize.org/nomination/physics/index.html
Qualified Nominators
The right to submit proposals for the award of a Nobel Prize in Physics shall,
by statute, be enjoyed by:
1. Swedish and foreign members of the Royal Swedish Academy of Sciences;
2. Members of the Nobel Committee for Physics;
3. Nobel Laureates in Physics;
4. Tenured professors in the Physical sciences at the universities and
institutes of technology of Sweden, Denmark, Finland, Iceland and Norway,
and Karolinska Institutet, Stockholm;
5. Holders of corresponding chairs in at least six universities or
university colleges (normally, hundreds of universities) selected by the
Academy of Sciences with a view to ensuring the appropriate distribution
over the different countries and their seats of learning; and
6. Other scientists from whom the Academy may see fit to invite proposals.
Robert Curto:
On the contrary, I am deeply grateful to all the Readers that wish us Good Luck!
Remember the commander of the Titanic who said “We do not need the help of God because this ship is unsinkable” ?
Warm Regards,
A.R.
Dr. Rossi, some people are wishing you, Good Luck, which is very kind of them.
I am not going to wish you Good Luck.
Because you are not going to need it.
All the effort of You and your Brilliant Team is going to pay off, big time.
Robert Curto
Ft. Lauderdale, Florida
USA
Yrka:
The names of the invited persons will not be made public. After the demo, every attendant will be free to disclose her/his attendance if she/he will do it.
Questions to me about the demo after it will have been put in the internet can also be sent to this blog or to http://www.leonardocorporation.com
Warm Regards,
A.R.
Dear Dr. Andrea Rossi,
is someone from Russia invited to the presentation?
Maybe Vitaly Uzikov, Irina Uzikova, Alexander Parkhomov?
You announced the broadcast of the presentation on http: //www.ecat.com, this will cause a heated discussion, do not you plan to open a blog there?
Good luck!
Thank you.
Yuriy Isaev
Engineer
Russia, Tyumen
JPR:
Now we are preparing everything for the demo of Nov 24th. Few days to go.
Warm Regards,
A.R.
Update after reaching the 5 Sigma?
Drew Glista:
Yes.
Warm Regards,
A.R.
Dr. Rossi:
Have any Nobel prize winners been invited to the 24 November demonstration of the ECAT Qx? If so, more than 1? I’m looking forward to this event after following developments since the Bologna University demonstration. Have a great Thanksgiving and a very successful demo.
Drew G.
Robert:
Thank you!
Warm Regards
A.R.
Greg Leonard:
Yes
Warm Regards
A.R.
Dear AR,
Thank you for setting up your demonstration for us all to see. Should we expect the QuarkX to be run at less than maximum – to make an error free demo almost certain?
regards,
Greg Leonard
Dear Dr Andrea Rossi,
Good luck for your momentous demo of the 24th.
Robert
TO ALL THE PERSONS THAT HAVE BEEN INVITED TO ATTEND TO THE DEMO OF NOVEMBER 24TH:
PLEASE BRING WITH YOU AN ID, BECAUSE THE SECURITY WILL CHECK THE NAMES OF THE LIST TO ALLOW TO ENTER.
PLEASE BE IN THE PLACE AT 9.30 A.M.
Warm Regards,
A.R.
Giannino Ferro Casagrande:
NO! The streaming will be after 12 P.M., Miami Time, which means after noon in Miami, Florida ( 12 A.M. would be midnight! ).
Warm Regards,
A.R.
Forse la risposta a Gianluca è :” 12 AM ” !!! Sul sito : ” http://www.eca.ccom ” ??? Chiarisci caro Andrea . Giannino da Udin . E FORZA !!!
English:
is perhaps the answer to Gianluca 12 AM?
Arjen:
Very nice coincidence!
Warm Regards,
A.R.
Gerard McEk:
The protocol will be explained at the beginning of the test.
Thank you for your wishes,
Warm Regards,
A.R.
Anonymous:
Yes, it is correct.
Warm Regards,
A.R.
Dear Dr Andrea Rossi:
I have understood that after noon of November 24th Miami, Florida time the video of the test will be online, correct?
Dear Andrea,
I am sure that many look forward to the E-cat QX presentation 11/24 after 12 o’clock Miami, Florida time.
Can you give some impression of what will be revealed. I read you will tell about the status of the theory you are developing.
1. Will you explain which reactions are taking place, how it is possible that the Coulomb barrier is overcome and why no radiation is measured?
2. Will you explain which reaction(s) produce the heat/light/electricity?
3. Will you reveal the minimum and maximum COP?
4. Will you reveal details about the way the QX is being controlled (on/off or in some analogue way like: off- cool- warmer- warm- hot- very hot-)
5. Will you explain how heat should be removed from the QX (with water, steam, air, inert gas, liquid metal; using natural flow, pumps, fans)
6. Will you explain how a cluster can be controlled?
7. Will you tell how far you are with your R&D in integrating the QX into an apparatus like a jet, hot air machine or whatever?
8. Will you give an impression how you see the world adapting to the E-cat QX (industrial processes, room heating, automotive and aerospace) including a prognosis of its assumed development (quantities, integration in society)?
9. Will you also reveal aspects of the QX that have never been mentioned?
10. Will you reveal how the operational details of the QX (operational life, refill fuel or replace QuarkX -clusters, maintenance requirements, safety aspects etc. etc.)
I know I ask a lot, but you know, we have been waiting so long for this and these questions are just some of the many more details where we have been waiting for.
I hope the demonstration will be great. Good luck to you and your team
Kind regards, Gerard
Congrats with the sigma 5!
I do not know if you realize that day sigma 5 was reached it was Saint Martins day 11 November.
Children in the Netherlands go around the houses with a self made light!
“Saint Martin of Tours was a Roman soldier who was baptised as an adult and became a monk. The most famous legend concerning him was that he had once cut his cloak in half to share with a beggar during a snowstorm, to save the latter from the cold. That night, he dreamt of Jesus, wearing the half-cloak and saying to the angels, “Here is Martin, the Roman soldier who is now baptised; he has clothed me.” [4] Saint Martin died on November 8, 397.”
Frank Acland:
No.
Warm Regards,
A.R.
Svein Henrik:
We will present the status of our theoretical research. Much study remains to be done, though.
Rodney Nicholson:
Thank you for your insight.
Warm Regards,
A.R.
Regarding Gabriel Berra’s post:
= = = = = = = = =
Gabriel Berra
November 11, 2017 at 5:04 PM
Dear Andrea, Congratulations on sigma 5 ! For the industrialization phase I imagine starting with the production of the Ecat QX as a heater will be the first priority. There is a trillion dollar market for heat and steam. A greater proportion of the $8 trillion annual global energy market is used on heat than transport or electricity generation. 3/4 of this heat is from fossil fuels. Generation of electricity will be a natural evolution of the device but generating heat will be enough to validate your technology and to generate whatever income you and your partners are hoping to achieve. Others can then adapt your technology for electricity generation and transport. Once again – congratulations and good luck.
– – – – –
Andrea Rossi
November 11, 2017 at 8:57 PM
Gabriel Berra:
Thank you for your insight, that I share.
Warm Regards,
A.R.
= = = = = = = =
And specifically with reference to: ” ……. generating heat will be enough to validate your technology and to generate whatever income you and your partners are hoping to achieve. …..” I would like to add that:
Most importantly, it will provide the financial wherewithal needed to support the cost of the research and development efforts required to bring all the other applications speedily to reality. Which everyone on the planet, if they know about it, is looking forward to.
Rodney Nicholson.
Dear Andrea
With no answer to 1, does this mean you now have found a theoretical explanation how this heat occurs, and by this the heat may no longer be regarded as anomalous?
Will such a theory be presented at the demo?
Best regards Svein Henrik
Dear Andrea,
Will attendees of the demo on Nov 24th be required to sign an NDA?
Kind regards,
Frank Acland
Svein Heinrik:
yes
Warm Regards,
A.R.
Dear Andrea.
Do you mean 2-11 yes?
Regards Svein Henrik.
Svein Henrik:
2, 11
Warm Regards,
A.R.
L.C.:
Yes. As a matter of fact, you find it written in both ways.
Warm Regards,
A.R.
Gian Luca and All Readers:
The streaming of the demonstration of the E-Cat QX will start around noon (12 P.M.) of November 24th, Miami time.
It will be available on
http://www.ecat.com
Warm Regards,
A.R.
Buon giorno Andrea
Where will can I see the test?
Is it possible to have here the link?
Thanks
Dear Andrea.
Congratulations for achieving Sigma 5. I am unsure what this compromise.
Do it means that this super high security counts for:
1. The observation of an anomalous heat is real?
2. The COP of the heat is higher than 6?
3. Or COP is higher than 50?
4. The QX tested, will supply 20W continuously in a year?
5. The QX do function totally at least in 8760 hours with an interrupted use?
6. The QX will function in 10 years with 10% intermittent?
7. A robotic production will be of the same quality or better?
8. The possibility to control the units?
9. No harmful radiation is present?
10. No risk for run off or melt down?
11. Or all the 10 above?
I hope you may answer 11 and this is a result of all the different tests you have performed.
Best wishes for the demo and a soon coming mass production as the world is full of “San Tommaso Apostolo”.
Regards Svein Henrik.
Dear Dr. Rossi,
Just to avoid misunderstandings, when you say “sigma 5”, you mean what is more commonly referred to as “5-sigma”?
Thank you very much.
L.C.
Italo R.:
The test will be streamed in the internet.
Warm Regards,
A.R.
Dr. Rossi, I’m afraid that because of the need to keep Quark X running secret, the result of the demo will remain in the end obscure and incomplete, and this will cause many doubts and criticisms to many observers.
However, I am aware that this is not very important, because the main priority is to convince potential investors and partners. Am I wrong?
Best Regards,
Italo R.