When you say “industrialization” do you mean “product manufacturing factory setup” or something different. In fact you have already begun marketing by accepting pre-orders for the eagerly awaited “home unit”.
Best of luck with your future industrialization plans.
Caro Andrea , dopo aver accertato , che la presentazione dei Tuoi meravigliosi E-CAT QX avverrà alle ore 12,00 (MIAMI ) ore 18,00 in Italia , Venerdì 24 novembre , , Ti chiedo gentilmente , dato che Tu qualche tempo fa , dicevi che lo streaming avverrà in RETE , in differita e che al momento della trasmissione avverrà pure la presentazione dello intero programma della reazione . Ti chiedo gentilmente se Ti è possibile rispondere :”
a) Dopo quanto tempo avverrà la differita ? Minuti o ore ?
b) Il presentatore parlerà solamente in inglese ?
c) I tre E-CAT QX , ognuno di un millimetro per venti millimetri , saranno pure privati , in qualche periodo di tempo del collegamento alla griglia ? E funzionare cosi i autosostentamento ?
d) Circa quanto tempo durerà la presentazione ?
e) Si può sapere già anticipatamente se i tre E-CAT hanno pure un qualche tipo di scambiatore di calore ?
Alette abbinate a qualche ventola ?
Oppure immersi (gli E-CAT ) in un qualche liquido ?
Grazie di tutto caro Andrea e F O R Z A !!!!!! Tuo … giannino di Udin :-))
Dr. Rossi, I’m completely confident that the demo will deliver amazing results, and I hope that this may finally be the beginning of marketing.
Best Regards,
Italo R.
i see there is some demo coming in the next days.
What will the device show? Some ‘heat’ measured by some infra-red-device (remote thermometer)?
Or will it produce steam ? Will the steam be made visible? Or will you just say ‘we have 105’C,
so inside this pipe there *must* be steam’ and therefore the COP is…
For your information, and the information of your readers. E-Cat World will be covering the upcoming E-Cat QX presentation at a new domain: http://www.ecatworld.org
In an important and historic occasion demonstration, please do not forget to have a photographer take still photographs as well as video recording. They are important for new releases and historic purposes.
Hi Andrea. http://www.greenturbine.eu sell a 15 KW steam powered turbine that only weighs 9kg for about 16,000 euro. Lighter and cheaper than a sterling engine and I suspect of similar efficiency. Best of luck on Friday.
Obro:
Yes, it will be streamed on the internet after 12 P.M. Miami Time on the same day ( Nov. 24th ) and eventually the link will be conserved on this blog and on http://www.ecat.com
Warm Regards,
A.R.
Dear Dr. Rossi,
Are you going to record your Nov.24th bitcast presentation and publish it on your web site, so that those that weren’t able to watch it live, can still see it?
Kindest regards,
Obro
Congratulations to you for reaching 5 Sigma and in bocca al lupo for the presentation on friday.
I’ve been following your progress through this blog and I hope soon you can see your golden baby at work in many places. Hopefully the home units will follow soon.
I am curious to know about the factories where the e-cat QXs are going to be built.
a. the factories are ready
b. the robotized lines are under construction
c. the robots are being built
d. the robots are being ordered
May God bless you, your crew and your family. Your gift to humanity is precious.
Daniel De Caluwe’:
i- thank you for your sustain
ii- information about the link to the streaming will be given here and on http://www.ecat.com on the 24th around noon Miami time
1- so far we got the certifications only for industrial applications
2- we are making R&D for such applications
Warm Regards,
A.R.
Woah to your perseverance and to the courage that makes you sustain the stress and anxiety of this period, just before the demo of November 24th, surely a momentous milestone of your life.
Some time ago on this blog, you asked about the possibility to produce hydrogen with the E-cat.
Well, you can do that by electrolysis. If the heat energy of E-cat QuarkX is transformed to electrical energy (for big units probably by Carnot-cycle, using steam turbines coupled with electrical generators; and for small units probably by sterling engines coupled with electrical generators in small units), you can make hydrogen by electrolysis of water.
In the past (more than ten years ago) “Hydrogensystems” (then a Belgian company, but also many years ago absorbed by the Canadian Company “Stuart Engineering”) selled small and completely stand-alone electrolysis units, producing hydrogen (H2) by electrolysis, out of water (H2O), that possibly could co-operate with wind turbines, so it also could co-operate with the E-cat if the heat energy of the E-cat is transformed to electrical energy (via Carnot for big units, or via Sterling engines for smaller units).
With the E-cat, and especially with the E-cat QuarkX, everything is possible! 😉
i) Congratulations to you and your team for attaining sigma 5 with your Ecat-QuarkX!
ii) Many thanks for organizing a demo (about the E-cat QuarkX) next friday. I hope to see it on lifestream.
iii) Some time ago and because of your interest in it, there were a lot of messages about Sterling engines on this forum, and therefore this Question:
1) Did you already get the necessary certification for the home-unit, and therefore your interest in the possible use of Sterling engines in it?
2) Or do you also focus on the use of the E-cat in the automotive industry, because of the fact that an E-cat combined with a Sterling engine coupled to an electrical motor loading the battery of an electrical car is a better way to drive an electrical car without the need of very expensive batteries with very big capacity? (I agree, contineously loading a small battery is much better than using big batteries, so this is a very interesting future application of the E-cat, because present application of big batteries in electrical cars: is expensive; still doesn’t have a good actiradius; and still takes a lot of loading time).
3) Or do you left the idea and only focus on producing heat at this moment?
Svein Henrik:
1- Sure: after the test, questions and comments can be sent also to eCat.com, as well as to this blog and the blogs of Mats Lewan and Frank Acland.
2- Yes, in due time.
Warm Regards,
A.R.
Dear Andrea
I have two questions:
1. As there may be several reports and written comments from attendees present at the demo and from others watching the streaming. May you encourage anyone to send their comment also to eCat.com?
2. Regarding the demo, will the specifications shown in the website at ecat-technology be revised to match the specifications which applies to the eCat QX?
My hopes are you may turn Black Friday to Bright Friday.
Regards Svein Henrik
Steven N.Karels:
All I said is that the E-Cat QX will run at 30% of its power. Like when you drive your car, supposedly with a rating of 100 HP, at 30 HP.
Warm Regards,
A.R.
Frank Acland:
I did not make that release and I have no idea about who generated it.
I stick to my position. Problem is that under a journalistic point of view LENR is ostic to digest, let alone Rossi effect.
Just keep in mind that we did not make press releases and we are not going to do any of the sort before the test is done.
Probably the journalist that wrote this article has taken information from this blog and elaborated it in a journalistic feature.
Warm Regards,
A.R.
The press release put out yesterday has this part:
“Andrea Rossi, in his search for a Fusion based clean energy source, can also confirm that Sigma 5 has been reached in preparation for the eCat QX.
“The Leonardo Corporation has been monumental in developing LENR technology that can turn fusion into a reality, to manufacture a truly renewable energy source that far outperforms all other current options.”
In the past you have rejected the term cold fusion or fusion, but stated that the E-Cat is LENR. This press release talks of fusion, so have you changed your thinking on this subject?
Thank you, and best of luck with the upcoming events!
To clarify your response to Dr. Joseph Fine — N number of eCat reactors will be all running at 30% of their maximum output value? So if N = 1, the overall thermal output would be 6W, while if N = 100, the overall thermal output would be 600W, assuming the rated maximum output power of a single reactor is 20W. Is my understanding correct?
Michel:
1- It is in evolution
2- Maybe
3- yes
Warm Regards,
A.R.
Dear Dr Rossi,
October 28 2011 : presentation of the 1MW reactor. Following this presentation a 1 year test, in collaboration with your US partnair.
– Does this 1MW reactor became obsolet ?
– Do you think a one year test with the Quark_QX is required before industrialization ?
– For the présentation of friday, will you give some theoretical informations about the reaction that occurs inside the reactor?
Regards,
Michel
Dear Dr. Rossi,
When you say “industrialization” do you mean “product manufacturing factory setup” or something different. In fact you have already begun marketing by accepting pre-orders for the eagerly awaited “home unit”.
Best of luck with your future industrialization plans.
Best Regards and Happy Thanksgiving,
Daniel G. Zavela
Caro Andrea , dopo aver accertato , che la presentazione dei Tuoi meravigliosi E-CAT QX avverrà alle ore 12,00 (MIAMI ) ore 18,00 in Italia , Venerdì 24 novembre , , Ti chiedo gentilmente , dato che Tu qualche tempo fa , dicevi che lo streaming avverrà in RETE , in differita e che al momento della trasmissione avverrà pure la presentazione dello intero programma della reazione . Ti chiedo gentilmente se Ti è possibile rispondere :”
a) Dopo quanto tempo avverrà la differita ? Minuti o ore ?
b) Il presentatore parlerà solamente in inglese ?
c) I tre E-CAT QX , ognuno di un millimetro per venti millimetri , saranno pure privati , in qualche periodo di tempo del collegamento alla griglia ? E funzionare cosi i autosostentamento ?
d) Circa quanto tempo durerà la presentazione ?
e) Si può sapere già anticipatamente se i tre E-CAT hanno pure un qualche tipo di scambiatore di calore ?
Alette abbinate a qualche ventola ?
Oppure immersi (gli E-CAT ) in un qualche liquido ?
Grazie di tutto caro Andrea e F O R Z A !!!!!! Tuo … giannino di Udin :-))
Italo R.:
Beginning of the marketing no, beginning of the process of industrializaton I think yes.
Warm Regards,
A.R.
Dr. Rossi, I’m completely confident that the demo will deliver amazing results, and I hope that this may finally be the beginning of marketing.
Best Regards,
Italo R.
Luis Navarro:
muchas gracias!
Warm Regards,
A.R.
Dear Andrea,
Como siempre contigo y deseandote lo mejor
para el 24 próximo.
Atentos saludos
Luis
Steven N. Karels:
OK
Warm Regards,
A.R.
Frank Acland:
Perfect! Thank you for the link, surely useful also to our Readers.
Warm Regards,
A.R.
Ivan Idso:
Information about the demo will be given on November 24th around noon, Miami time.
Warm Regards,
A.R.
Dr Joseph Fine:
Thank you for the information.
Warm Regards,
A.R.
DvH:
You see there is some demo coming up in the next days? Really? Wow! That’s some mouthful!
Warm Regards,
A.R.
Hello Mr. Rossi
i see there is some demo coming in the next days.
What will the device show? Some ‘heat’ measured by some infra-red-device (remote thermometer)?
Or will it produce steam ? Will the steam be made visible? Or will you just say ‘we have 105’C,
so inside this pipe there *must* be steam’ and therefore the COP is…
Greetings from cold Europe
DvH
Dear Andrea Rossi,
I saw this article this morning.
Perhaps you may be interested in an inexpensive Muon Detector.
https://phys.org/news/2017-11-physicists-handheld-muon-detector.html
It may be useful as well as important to use multiple detectors to measure Muon levels in the vicinity of the E-Cat QX.
Even if few or zero Muons are detected, that would be reassuring to those concerned about possible high Muon levels.
Best wishes for the Nov 24th Demo and Happy Thanksgiving,
Joseph Fine
Dear Andre Rossi,
I might have missed it but how long will the test run? Good luck on the test!
Ivan Idso
Dear Andrea,
For your information, and the information of your readers. E-Cat World will be covering the upcoming E-Cat QX presentation at a new domain:
http://www.ecatworld.org
Wishing you the best of luck for this event!
Kind regards,
Frank Acland
Dear Andrea Rossi,
In an important and historic occasion demonstration, please do not forget to have a photographer take still photographs as well as video recording. They are important for new releases and historic purposes.
@Gabriel Berra,
I agree that the green turbine maybe is a better option to co-operate with the E-cat:
Green Turbine 15kW:
http://www.greenturbine.eu/GT15.html
Green Turbine 1.5kW:
http://www.greenturbine.eu/GT1.html
Kind Regards,
Gabriel Berra:
Thanks for the information and for your kind wishes,
Warm Regards,
A.R.
JPR:
I feel prepared for the demo. Checking all the particulars, though.
Warm Regards,
A.R.
Hi Andrea. http://www.greenturbine.eu sell a 15 KW steam powered turbine that only weighs 9kg for about 16,000 euro. Lighter and cheaper than a sterling engine and I suspect of similar efficiency. Best of luck on Friday.
Update?
Obro:
Yes, it will be streamed on the internet after 12 P.M. Miami Time on the same day ( Nov. 24th ) and eventually the link will be conserved on this blog and on http://www.ecat.com
Warm Regards,
A.R.
Dear Dr. Rossi,
Are you going to record your Nov.24th bitcast presentation and publish it on your web site, so that those that weren’t able to watch it live, can still see it?
Kindest regards,
Obro
Hi Andrea, apparently Qalovis.com sell a 38 KW sterling generator. Good luck with Fridays test.
Alfonso Troisi Lopez:
a- not yet
b- not yet
c- not yet
d- confidential
Thank you for your sustain,
Warm Regards,
A.R.
Hello Mr. Rossi,
Congratulations to you for reaching 5 Sigma and in bocca al lupo for the presentation on friday.
I’ve been following your progress through this blog and I hope soon you can see your golden baby at work in many places. Hopefully the home units will follow soon.
I am curious to know about the factories where the e-cat QXs are going to be built.
a. the factories are ready
b. the robotized lines are under construction
c. the robots are being built
d. the robots are being ordered
May God bless you, your crew and your family. Your gift to humanity is precious.
Best Regards,
Alfonso Troisi Lopez
Daniel De Caluwe’:
i- thank you for your sustain
ii- information about the link to the streaming will be given here and on http://www.ecat.com on the 24th around noon Miami time
1- so far we got the certifications only for industrial applications
2- we are making R&D for such applications
Warm Regards,
A.R.
Mike:
Thank you for your sympathy.
Warm Regards,
A.R.
Woah to your perseverance and to the courage that makes you sustain the stress and anxiety of this period, just before the demo of November 24th, surely a momentous milestone of your life.
@Nereo Miconi,
Some time ago on this blog, you asked about the possibility to produce hydrogen with the E-cat.
Well, you can do that by electrolysis. If the heat energy of E-cat QuarkX is transformed to electrical energy (for big units probably by Carnot-cycle, using steam turbines coupled with electrical generators; and for small units probably by sterling engines coupled with electrical generators in small units), you can make hydrogen by electrolysis of water.
In the past (more than ten years ago) “Hydrogensystems” (then a Belgian company, but also many years ago absorbed by the Canadian Company “Stuart Engineering”) selled small and completely stand-alone electrolysis units, producing hydrogen (H2) by electrolysis, out of water (H2O), that possibly could co-operate with wind turbines, so it also could co-operate with the E-cat if the heat energy of the E-cat is transformed to electrical energy (via Carnot for big units, or via Sterling engines for smaller units).
With the E-cat, and especially with the E-cat QuarkX, everything is possible! 😉
Kind Regards,
Dear Dr. Rossi,
i) Congratulations to you and your team for attaining sigma 5 with your Ecat-QuarkX!
ii) Many thanks for organizing a demo (about the E-cat QuarkX) next friday. I hope to see it on lifestream.
iii) Some time ago and because of your interest in it, there were a lot of messages about Sterling engines on this forum, and therefore this Question:
1) Did you already get the necessary certification for the home-unit, and therefore your interest in the possible use of Sterling engines in it?
2) Or do you also focus on the use of the E-cat in the automotive industry, because of the fact that an E-cat combined with a Sterling engine coupled to an electrical motor loading the battery of an electrical car is a better way to drive an electrical car without the need of very expensive batteries with very big capacity? (I agree, contineously loading a small battery is much better than using big batteries, so this is a very interesting future application of the E-cat, because present application of big batteries in electrical cars: is expensive; still doesn’t have a good actiradius; and still takes a lot of loading time).
3) Or do you left the idea and only focus on producing heat at this moment?
Kind Regards,
Daniel.
Svein Henrik:
1- Sure: after the test, questions and comments can be sent also to eCat.com, as well as to this blog and the blogs of Mats Lewan and Frank Acland.
2- Yes, in due time.
Warm Regards,
A.R.
JPR:
This week will be dedicated to the preparation of the November 24th event, while the R&D follows up its course.
Warm Regards,
A.R.
Update in the aftermath of the 5 Sigma?
Dear Andrea
I have two questions:
1. As there may be several reports and written comments from attendees present at the demo and from others watching the streaming. May you encourage anyone to send their comment also to eCat.com?
2. Regarding the demo, will the specifications shown in the website at ecat-technology be revised to match the specifications which applies to the eCat QX?
My hopes are you may turn Black Friday to Bright Friday.
Regards Svein Henrik
Kurt:
We are preparing everything well.
Now the focus is mainly on it.
Warm Regards,
A.R.
Dr Andrea Rossi:
How is going the prep for the test of Nov 24th?
Sam:
Thank you !
Warm Regards,
A.R.
Hello Dr Rossi
I hope the Nov 24 demonstration
of the QX goes well for you.
Regards
Sam
Obro:
The maximum focus will be on the industrialization.
Warm Regards,
A.R.
Dear Dr Rossi,
Can you share with us what you intend to occupy yourself with in the immediate future after the November presentation?
Regards,
Obro
After the test anybody will be able to interact with me on this blog.
Warm Regards
A.R.
Dear Dr Rossi,
Will it be possible to interact directly with you or your team after the presentation?
Regards,
Michel
Steven N.Karels:
All I said is that the E-Cat QX will run at 30% of its power. Like when you drive your car, supposedly with a rating of 100 HP, at 30 HP.
Warm Regards,
A.R.
Frank Acland:
I did not make that release and I have no idea about who generated it.
I stick to my position. Problem is that under a journalistic point of view LENR is ostic to digest, let alone Rossi effect.
Just keep in mind that we did not make press releases and we are not going to do any of the sort before the test is done.
Probably the journalist that wrote this article has taken information from this blog and elaborated it in a journalistic feature.
Warm Regards,
A.R.
Dear Andrea,
The press release put out yesterday has this part:
“Andrea Rossi, in his search for a Fusion based clean energy source, can also confirm that Sigma 5 has been reached in preparation for the eCat QX.
“The Leonardo Corporation has been monumental in developing LENR technology that can turn fusion into a reality, to manufacture a truly renewable energy source that far outperforms all other current options.”
http://www.nasdaq.com/press-release/ecatcom-announces-live-video-demonstration-of-the-ecat-qx-november-24-2017-12-pm-est–live-video-20171116-01068
In the past you have rejected the term cold fusion or fusion, but stated that the E-Cat is LENR. This press release talks of fusion, so have you changed your thinking on this subject?
Thank you, and best of luck with the upcoming events!
Frank Acland
Dear Andrea Rossi,
To clarify your response to Dr. Joseph Fine — N number of eCat reactors will be all running at 30% of their maximum output value? So if N = 1, the overall thermal output would be 6W, while if N = 100, the overall thermal output would be 600W, assuming the rated maximum output power of a single reactor is 20W. Is my understanding correct?
Dr Joseph Fine:
That’s SOME idea!!!
Warm Regards,
A.R.