United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

20,651 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Pietro:
    It is possible, by means of the Carnot cycle.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Bernard:
    Thank you for your attention to our work,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Elena:
    CFO, physicist
    Warm Regards,
    A.R.

  • Andrea Rossi

    Jeremy Cobane:
    No, because weak forces would emit much stronger radiations.
    Warm Regards,
    A.R.

  • Jeremy Cobane

    Dear Andrea,
    Do you think that the weak force can be involved in LENR phenomenons?

  • Elena

    You said in a recent comment that in your team there are women at high level: can you give us examples of their duties?

  • Andrea Rossi

    Anonymous:
    I think so, but it has to be clarified if the safety certification we have for industrial applications is valid also for hospitals.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Prof:
    I confirm,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Anonymous:
    This is easy: YESSS !
    Warm Regards,
    A.R.

  • Andrea Rossi

    Albert Ellul:
    Thank you for your opinion,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Italian Taxpayer:
    Thank you for your opinion,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Harvey:
    1- not yet
    2- no
    3- unforseen obstacles ( “dark obstacles” )
    4- no
    5- n.a.
    6- will also ship abroad
    Thank you for your attention to our work
    Warm Regards,
    A.R.

  • Harvey

    Dear Andrea,
    While I recognize that your efforts are predominately focused on the Ecat QX development to achieve first production in this year. However, there are undoubtedly many other issues requiring your attention to achieve this goal. If it is not confidential, can you please advise on the progress in the development of the US manufacturing facility?
    1. Has physical work commenced on the construction and installation of manufacturing equipment?
    2. Do you feel that the US plant will be able to perform a pre-production run by the end of the third quarter of this year?
    3. What do you consider to be the most significant obstacle in getting the plant on line this year?
    4. Are you able to disclose the state in which the plant is located?
    5. What is the planned annual production capacity after the plant is fully on line?
    6. Will this plant be used only for US markets or will it also ship to global clients?
    I hope you are also able to find other domestic and international venues to satisfy the immense demands that already exist.
    Thanks for the intensely hard work by you and all of your team.
    Harvey

  • Bernard

    Dear Andrea Rossi,
    I enjoyed the video on Google of the Stockholm demo at the IVA and I am grateful for the openness of this very convincing test.
    Thank you,
    Bernard

  • Pietro

    Bentrovato sig. Rossi,

    la seguo ormai da anni
    una domanda, da chi poco capisce di fisica,

    mi puo’ spiegare, in parole molto povere, se sia possibile collegare un ecat ad una turbina e produrre più elettricita di quanto ne consumi, e, se non fosse possibile, il motivo.

    Grazie e buona salute

    Pietro

  • Bobby Ellery

    Dear Dr Andrea Rossi,
    Are you still keeping your hands dirt making tests and prototypes, or now you leave this part to others of your team?
    Godspeed, Bobby

  • Italian Taxpayer

    Dear Andrea:
    The ENEA 500 millions investments in the hot fusion is the usual fraud to the taxpayers: ENEA in 38 years of existence has spent billions in totally useless R&D. It has produced nothing, not a single patent that has been turned into a real manufacturing. It has been born in 1980 to park the sons of the ENI managers that could not be placed in ENI because not able to perform a real work .
    Now these 500 millions that the Italian taxpayer has been minted of will produce nothing, along the tradition of this totally useless entity named ENEA. Where the money they got is gone is a “mistery”.
    IT (Italian Taxpayer)

  • Albert Ellul

    The promise of (hot) fusion energy is one of the biggest scams ever.50 years ago scientists had described nuclear fusion energy as the energy of the future, and in a way they were correct, because it will always be the energy of the future. After 50 years of sucking up billions of tax dollars, hot fusion is still cold and the truth is that it will take another 50 years for the first nuclear reactor to go on stream.

    Meanwhile cold fusion is getting hot thanks to you Andrea Rossi. Looking forward for the first E-Cat QX to roll out of the robotic line, hopefully this year, but 2019 will be OK too.

  • Anonymous

    Dr Andrea Rossi:
    Can you say if the Ecat SK of 10/100 kW has a hope to arrive in the industrial market before the hot fusion?

  • Prof

    Do you confirm that the temperature of the core of the Ecat QX is higher than 1 eV?
    Cheers
    Prof

  • Anonymous

    Do you think that hospitals could use the Ecat to generate heat?

  • Andrea Rossi

    Ugo:
    No.
    Warm Regards,
    A.R.

  • Ugo

    Dear Andrea:
    Do you have some activity of yours left in Italy, related or not to the Ecat?
    Cheers,
    Ugo

  • Andrea Rossi

    Paolo:
    Thank you for the link. It starts with a lie: Tokamak is not a patent of ENEA and this R&D is going on about half century since, as an R&D made by the European community; it already costed tens of billions without positive results so far.
    Any further comment is fairly useless, but, as I always said, all the potential energy sources can and must be integrated.
    Warm Regards,
    A.R.

  • Paolo

    Dear Andrea,
    I hope you are still well, even in this period of strong pressure.
    Look at this link:
    http://e-catworld.com/2018/04/18/italy-invests-500-million-euros-in-hot-fusion-research-enea/
    As usual, this big money coming from the taxpayer will be wasted: I hope you will be enough fast to save this waste of money.
    May God help you in your so difficult job,
    Paolo

  • Andrea Rossi

    Raffaele Bongo:
    Good question: there is a difference, but not proportional. The weight/kW id much less in the bigger reactors. In other words, the power density is much higher.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Cardano:
    I already said what I think about this issue.
    Thank you anyway for the information,
    Warm Regards,
    A.R.

  • Cardano

    Dr Rossi,

    * Green Bitcoin mining is huge now and growing.

    http://bitcoinist.com/bitcoin-miners-cutting-costs-by-going-green/

    * Bitcoin News Link:

    https://news.bitcoin.com/

  • Raffaele Bongo

    Hello Andréa Rossi

    Is there a significant difference in mass between the high power reactor (100 Kw) and the small reactor (40 W) or is it only the parameters of the control system that are different?
    Thank you for your answers to our questions
    All my support and encouragement
    Your supporter

    Raffaele

  • Andrea Rossi

    Tiberio:
    Yes, I got the due information. They severed the production line of the heaters coupled with Stirling engines to make cogeneration. It has not been possible to collect information about the real reasons. Officially they say that it happened because of new restrictions of regulations related to the emissions, but this sounds strange to me, because the Stirling engine does not affect the pollutants in the emissions of a gas burner.
    Warm Regards,
    A.R.

  • Tiberio

    Dr Andrea Rossi:
    Regarding the heater of Viessmann that makes the cogeneration with the Stirling engine, did you get information useful to the Ecat technology?

  • Andrea Rossi

    Svein Henrik:
    Enough.
    Warm Regards,
    A.R.
    P.S.
    I have a pending NDA with all the contacts with potential Customers, therefore I cannot refer to any of them in positive or in negative. This will remain always our policy.

  • Svein Henrik

    Dear Andrea.
    I wonder, how many OEM‘s is contacting you every week in seek for information of the possibilities the Ecat may represent as a heat source in their product?
    And how many companies using heat in their manufacturing are asking for information’s?

    Warm Regards, Svein Henrik.

  • Andrea Rossi

    Italo R.:
    I never criticize the work of others. I cannot make observations about a problem I do not know. If you are asking if I too can make mistakes, the answer is yes.
    Warm Regards,
    A.R.

  • Italo R.

    Dear Dr. Rossi, Elon Musk has trouble producing large quantities of his Tesla model 3 cars because he says that there are too many robots slowing down the production.
    He says that inserting more men in place of robots could increase production.
    Do you think that a similar problem may also occur in your case?

    Kind regards,

    Italo R.

  • Andrea Rossi

    Frank Acland:
    Ask General Motors the same question.
    Warm Regards,
    A.R.

  • Frank Acland

    Dear Andrea,

    Is it worthwhile for you to get an industrial product into the market as soon as possible, even if it may soon be replaced by superior models that you have in R&D?

    Best wishes,

    Frank Acland

  • Andrea Rossi

    G:
    Yes, it is the sole way to measure the temperature of the plasma body. There are not thermometers that can work above the melting point of platinum and rhodium. We reach T well above 1 eV.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Isabel:
    We are working on all the line, but the main focus is on the prototype that has best odds to be ready within this year.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Frank Acland:
    I am under NDA.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Buck:
    The name is global, but I cannot answer in positive or in negative, because I am under NDA. Obviously with a series of lists, by exclusion, it would be easy to individuate the name.
    Warm Regards,
    A.R.

  • Buck

    Good Day Andrea:

    I read with some interest on you visit to Chicago.
    Presuming you signed a contract with your global customer, is your customer on the following list?
    Link>> https://www.luc.edu/law/career/practice_areas/publically_held.html

    My best to you and your team,

    Buck

  • Frank Acland

    Dear Andrea,

    If you can say, was the contract you signed in Chicago connected with the US global food company you had mentioned?

    Thank you,

    Frank Acland

  • Isabel

    Dear Andrea Rossi:
    Is the module of the Ecat SK with a power of 10/100 kW improving, or you are stuck in the mud of the difficulties and have not time for it because you are focused on the 100- 1000 W Ecat QX?

  • G

    Dear Andrea,
    Googling ” Youtube Ecat QX demonstration at the IVA of Stockholm” i found the magnificent video with the 3 hours of demo. Question: the measurement with the spectrometer has not been possible because of the light emitted by the big screen wherein the spectrometry diagram was visible. Do you normally use the spectrometer to measure the temperatures of the plasma?

  • Andrea Rossi

    Daren:
    He,he,he…yes, I was in Chicago yesterday to sign a contract.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Giovanni:
    Irka has expressed an opinion, nothing wrong with this fact.
    Thank you for your kind attention to our work,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Alexis:
    Thank you, we are working hard on it,
    Warm Regards,
    A.R.

  • Alexis

    Dr Andrea Rossi,
    I watched on http://www.ecat.com all the three links to the event of Stockholm for the presentation at the IVA of the Ecat QX. Very impressive and very convincing.
    Now I hope your enormous work will soon end up with the introduction of a product for sale.
    Godspeed,
    Alexis

  • Daren

    Dear Dr Andrea Rossi:
    Yesterday a friend of mine has spotted you at the airport of Chicago: was that person really you? Can I ask if your concern or partner is in Chicago?

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>