Dear Andrea,
I saw your interview of today on Ecatworld: very funny! ” the Lord said must love your enemies, so I love my enemies, I really do” Ha,ha,ha
Congratulations for the great results with the Ecat SK
Gigi
I would like to thank you, I have been following your work since 2011, and your hard work brings me hope for the futur of humanity, now we can reach for the Stars !
And the saga is getting more and more exciting !
P.S : I keep thinking of the “THE SAINT”how intuitive was the film.
Hi, Andrea:
did you consider the issue of the reactor corrosions with the radiations wavelengths you have measured?
On a side note: did you schedule the training for the field assistance? I am interested for Canada.
Best Regards,
Wes
Steven N. Karels:
I don’t know the bases of your formula, but I agree that the increase of the power density has been exponential. The circuitry has been completely changed, an enormous work of R&D has been done.
It is true, though, that the power of the Ecat QX presented in Stockholm ( Youtube demonstration of the Ecat QX of November 24 in Stockholm ) was 100 W, not 20, albeit we reduced to 20 W the power during the demo to avoid any risk of failure: I was terrorized to make errors during such an important event and still I did not have the technology invented eventually. In these last 5 months we made an enormous work.
Warm Regards,
A.R.
You posted approximately a 4 times increase in the size for the eCat reactor. But I recall the previous eCat had a rated output of 20W thermal and it is alleged that you know have a 100kW eCat reactor. Based on the ratio of 100kW / 20W or 5,000, should not the single dimensional increase be a factor of 17, based on volume, or a factor of 70, based on area? Please clarify.
Raffaele Bongo:
The spectrum of sunlight covers the electromagnetic spectrum from infrared through near U.V.
The spectrum of the Ecat SK covers from 100 nm through 200 nm
Warm Regards,
A.R.
Dr Andrea Rossi:
I suggest to all the readers of this blog to read all the pages of the website http://www.ingandrearossi.com
if they did not already do it. It is really inspiring.
Thank you for sharing with us this tragic catharsis,
all the best,
Luciano
Does the white light emitted by the SK have the same spectrum as natural sunlight? If not, can you tell us what the differences are?
The SK would probably be better suited for the construction of large power plants.
All my support for the success of SK R & D
Best regards
Gerard McEk:
1- too soon to know, I suppose at least 6 months
2- no
3- different equipment
4- yes, but we are not going to sell the Ecats, we will sell the heat installing them in the factories of our Customers and controlling them from our HQ in the USA by means of reserved communication channels that we do deem unattackable ( we really do ).
Warm Regards,
A.R.
Dear Andrea,
It is fascinating to read your first impression of the SK, it looks like a sun on earth, isn’t it?
The heat must be tremendous.
1. Do you have any idea how long the fuel will last, while continuous in operation?
2. Now that you take also the 100 kW SK in operation, it seems that with the already planned production equipment, your production capacity rises also with a factor near to 100.
So it seems you could produce Ecats with a total output equivalent of about 10 GW next year, is that a right assumption?
3. Can you control the SK with the same controller as the QX, or do you need ‘heavier equipment’?
4. I would assume that also the cost per kW output dropped dramatically, is that right?
Thanks, kind regards, Gerard
Steven N.Karels:
1- not yet, but moreless four times the Ecat QX shown in Stockholm ( google youtube ecat QX demonstration on November 24 in Stockholm”
2- enough to obtain any usable temperature on the secondary of the heat exchanger
3- enough, very enough
When we will deliver it to the Customers I will supply these data, not before
Warm Regards,
A.R.
1. Can you please provide the reactor dimensions of the 100kW SK reactor?
2. What is its maximum operating temperature (or what you are willing to state)?
3. What effective COP are you observing?
Salve Dott. Rossi!
Sono molti anni che seguo il suo progetto e gli ultimi sviluppi mi stanno molto emozionando.
Avanti così!!!
Siete l’unica salvezza per il mondo
judging from the test of the 24th november, the control system seems to be open loop, because of the response to the change from low resistance to 800 ohm.
I know that you can not say anything in positive or negative, but i suggest to use a closed loop control system, if you do not use it.
The advantages are many. Fisrt of all a well designed closed loop control system, avoids the runaways such that the one that broke your grade 14 glass…
Be sure to design a correct control system with proper anti wind up protection…
Clark:
we had to protect ourselves behind a grade 14 glass because looking at the light radiated by the SK could damage seriously the eyes. Few seconds after the turn on of the reactor the heat radiated from the Ecat SK broke the 14 protection glass. We had supplementary 14 protection masks. Nonetheless, I saw from that minuscule reactor exit a tremendously dazzling white light all around the laboratory and I will never forget this impression. The SK was born. I think we will make it useful. Many errors emerged, but now we work to correct them, the most difficult part has been resolved.
Warm Regards,
A.R.
I have been holding my breath waiting for you to let us know about the results of the strategic test you just completed. You have again exceeded our expectations in the potentially strategic realignment of the 100 kW as a possible inclusion or update to your industrialization goals.
Thanks to you and all your team for sharing that OVER THE TOP and very wonderful information with us!
Honestly, I dared not try to imagine your team daring to dream, beam, gleam, scheme, seam or STEAM with this type of announcement, but it is in fact consistent with your basic “theme” of research. Earth Shaking!
Dr irina and Vitaly uzikov:
Thank you for your attention and for your support. Yes, I am very satisfied of what I saw. I think we will work together too.
Warm Regards,
A.R.
Anonymous:
100 kW and it is 4 times as big as the 1 kW Ecat QX ( not counting the heat exchanger ), that has the same dimensions of the Ecat QX shown in Stockholm on Nov 24.
I think we made a very good work in these months. Very brutal, but fruitful.
I am still trembling. It was emotional. Now we have to work on it, but I think they will arrive together in the market.
Warm Regards,
A.R.
In the case of sterling motors. Inresol AB has some models with built-in VPN as security to control the control unit. In the brochure, they show how the engines can be linked to a MW plant in a container. One of the models is apparently a “gamma engine” according to the website. Perhaps interesting to know even though “gamma engine” is a well-known concept of sterling motors …
Dear Andrea,
Congratulations with the near to successful tests of the Ecat SK.
1. As far as I know you have mentioned two versions of the SK in the past: the 10 kW and the 100 kW version. Which one was tested?
2. Have you already decided to to take this SK unit in production too?
3. When the SK will be taken into production, will then also your initial output level target rise from 100 MW to 1 GW?
Thanks and kind regards, Gerard
Your business strategy is to sell energy in the form of heat and not to sell boilers. This sounds like John Davison Rockefeller’s clever strategy for developing petrol lamps for free, and then selling the oil to make them work.
I hope and wish you a similar success to this gentleman
I also hope that the tests on the SK will live up to your expectations. I am looking forward to hearing more about this topic.
All my support to the team
Best regards
Ron:
…but I really do…
Warm Regards,
A.R.
Frank Acland:
Thank you for the link!
Warm Regards,
A.R.
Wes More:
Yes, we considered it and we are immune.
Warm Regards,
A.R.
Dear Andrea,
I saw your interview of today on Ecatworld: very funny! ” the Lord said must love your enemies, so I love my enemies, I really do” Ha,ha,ha
Congratulations for the great results with the Ecat SK
Gigi
Toussaint Francois:
Thank you for your kind attention toward our work,
Warm Regards,
A.R.
Charlie Sutherland:
Probably the most shocking I made so far,
Warm Regards,
A.R.
Andrea,
Your latest experiment has got to be exciting!
All the best,
Charlie
Dear Andrea Rossi,
I would like to thank you, I have been following your work since 2011, and your hard work brings me hope for the futur of humanity, now we can reach for the Stars !
And the saga is getting more and more exciting !
P.S : I keep thinking of the “THE SAINT”how intuitive was the film.
Warm Regards.
Toussaint François
Hi, Andrea:
did you consider the issue of the reactor corrosions with the radiations wavelengths you have measured?
On a side note: did you schedule the training for the field assistance? I am interested for Canada.
Best Regards,
Wes
Dear Andrea,
Thank you for taking some of my questions about the E-Cat SK. For your reader’s convenience they can be found here: http://e-catworld.com/2018/05/29/qa-with-andrea-rossi-about-the-e-cat-sk/
Best regards,
Frank Acland
Steven N. Karels:
I don’t know the bases of your formula, but I agree that the increase of the power density has been exponential. The circuitry has been completely changed, an enormous work of R&D has been done.
It is true, though, that the power of the Ecat QX presented in Stockholm ( Youtube demonstration of the Ecat QX of November 24 in Stockholm ) was 100 W, not 20, albeit we reduced to 20 W the power during the demo to avoid any risk of failure: I was terrorized to make errors during such an important event and still I did not have the technology invented eventually. In these last 5 months we made an enormous work.
Warm Regards,
A.R.
Dear Andrea Rossi,
You posted approximately a 4 times increase in the size for the eCat reactor. But I recall the previous eCat had a rated output of 20W thermal and it is alleged that you know have a 100kW eCat reactor. Based on the ratio of 100kW / 20W or 5,000, should not the single dimensional increase be a factor of 17, based on volume, or a factor of 70, based on area? Please clarify.
Raffaele Bongo:
The spectrum of sunlight covers the electromagnetic spectrum from infrared through near U.V.
The spectrum of the Ecat SK covers from 100 nm through 200 nm
Warm Regards,
A.R.
Luciano:
Thank you. It has been more tragic than cathartic, though.
Warm regards,
A.R.
Dr Andrea Rossi:
I suggest to all the readers of this blog to read all the pages of the website
http://www.ingandrearossi.com
if they did not already do it. It is really inspiring.
Thank you for sharing with us this tragic catharsis,
all the best,
Luciano
Hello A. Rossi
Does the white light emitted by the SK have the same spectrum as natural sunlight? If not, can you tell us what the differences are?
The SK would probably be better suited for the construction of large power plants.
All my support for the success of SK R & D
Best regards
Raffaele
Gerard McEk:
1- too soon to know, I suppose at least 6 months
2- no
3- different equipment
4- yes, but we are not going to sell the Ecats, we will sell the heat installing them in the factories of our Customers and controlling them from our HQ in the USA by means of reserved communication channels that we do deem unattackable ( we really do ).
Warm Regards,
A.R.
Sam:
two days.
Warm Regards,
A.R.
Sam:
The test has been made in the USA in a specialized laboratory and the persons were me plus two
Warm Regards,
A.R.
Marco:
Thank you for your suggestions,
Warm Regards,
A.R.
Dear Andrea,
It is fascinating to read your first impression of the SK, it looks like a sun on earth, isn’t it?
The heat must be tremendous.
1. Do you have any idea how long the fuel will last, while continuous in operation?
2. Now that you take also the 100 kW SK in operation, it seems that with the already planned production equipment, your production capacity rises also with a factor near to 100.
So it seems you could produce Ecats with a total output equivalent of about 10 GW next year, is that a right assumption?
3. Can you control the SK with the same controller as the QX, or do you need ‘heavier equipment’?
4. I would assume that also the cost per kW output dropped dramatically, is that right?
Thanks, kind regards, Gerard
Gavino Mamia:
Thank you for your kind attention to the work of our team,
Warm Regards,
A.R.
Steven N.Karels:
1- not yet, but moreless four times the Ecat QX shown in Stockholm ( google youtube ecat QX demonstration on November 24 in Stockholm”
2- enough to obtain any usable temperature on the secondary of the heat exchanger
3- enough, very enough
When we will deliver it to the Customers I will supply these data, not before
Warm Regards,
A.R.
Sam:
Yes, as soon as possible.
Warm Regards,
A.R.
Mats Heijkenskjold:
By measurements.
Warm Regards,
A.R.
Herwig Lauten:
Yes, the lambda is between 100 and 200 nm
Warm Regards,
A.R.
Dear Andrea Rossi,
have you been able to obtain a full spectrum scan of the radiation emitted by the Ecat SK?
Wish all the best,
Herwig Lauten
Dear Andrea,
Congratulations to the the Ecat SK successful tests!!
Just a stupid question: How do you know the SK is 100kW? By measurements or theoretical calculations?
Best regards
Good Morning Dr Rossi
I hope you have gotten some rest
after S.K. test.Will you be posting
any pictures of the test?
Regards
Sam
Dear Andrea Rossi,
1. Can you please provide the reactor dimensions of the 100kW SK reactor?
2. What is its maximum operating temperature (or what you are willing to state)?
3. What effective COP are you observing?
Salve Dott. Rossi!
Sono molti anni che seguo il suo progetto e gli ultimi sviluppi mi stanno molto emozionando.
Avanti così!!!
Siete l’unica salvezza per il mondo
Dear Andrea,
judging from the test of the 24th november, the control system seems to be open loop, because of the response to the change from low resistance to 800 ohm.
I know that you can not say anything in positive or negative, but i suggest to use a closed loop control system, if you do not use it.
The advantages are many. Fisrt of all a well designed closed loop control system, avoids the runaways such that the one that broke your grade 14 glass…
Be sure to design a correct control system with proper anti wind up protection…
Best Regards,
Marco
Hello DR Rossi
Can you reveal how many people
where running the test and how many
people there?
Thanks
Sam
Hello DR Rossi
Congratulations to you and your team on the successful
EcatSK test.Can you say how long the test took?
Regards
Sam
Clark:
we had to protect ourselves behind a grade 14 glass because looking at the light radiated by the SK could damage seriously the eyes. Few seconds after the turn on of the reactor the heat radiated from the Ecat SK broke the 14 protection glass. We had supplementary 14 protection masks. Nonetheless, I saw from that minuscule reactor exit a tremendously dazzling white light all around the laboratory and I will never forget this impression. The SK was born. I think we will make it useful. Many errors emerged, but now we work to correct them, the most difficult part has been resolved.
Warm Regards,
A.R.
Dear Andrea Rossi:
Can you describe some particular phase that made you tremble during the Ecat SK test?
Tom Conover:
Thank you for yur continue attention to the work of our Team.
Dimension: less.
Warm Regards,
A.R.
Dear Andrea,
I have been holding my breath waiting for you to let us know about the results of the strategic test you just completed. You have again exceeded our expectations in the potentially strategic realignment of the 100 kW as a possible inclusion or update to your industrialization goals.
Thanks to you and all your team for sharing that OVER THE TOP and very wonderful information with us!
Honestly, I dared not try to imagine your team daring to dream, beam, gleam, scheme, seam or STEAM with this type of announcement, but it is in fact consistent with your basic “theme” of research. Earth Shaking!
Thank you for sharing with us.
Regards,
Tom
… will it be a 24″ cube or smaller perhaps?
Dr irina and Vitaly uzikov:
Thank you for your attention and for your support. Yes, I am very satisfied of what I saw. I think we will work together too.
Warm Regards,
A.R.
Frank Acland:
We are working toward that target.
Thank you for your attention,
Warm Regards,
A.R.
Toussaint Francois:
I hope so for both,
Warm Regards,
A.R.
Raffaele Bongo:
Thank you for your kind support,
Warm Regards,
A.R.
Gerard McEk:
1- 100 kW
2- yes
3- modules can be combined theoretically without limits
Warm Regards,
A.R.
Jag Bara Undrar:
Thank you for the information,
Warm Regards,
A.R.
Anonymous:
100 kW and it is 4 times as big as the 1 kW Ecat QX ( not counting the heat exchanger ), that has the same dimensions of the Ecat QX shown in Stockholm on Nov 24.
I think we made a very good work in these months. Very brutal, but fruitful.
I am still trembling. It was emotional. Now we have to work on it, but I think they will arrive together in the market.
Warm Regards,
A.R.
Dear Andrea:
Strong congratulations for the successful test of the Ecat SK. Can you tell us the power you got?
In the case of sterling motors. Inresol AB has some models with built-in VPN as security to control the control unit. In the brochure, they show how the engines can be linked to a MW plant in a container. One of the models is apparently a “gamma engine” according to the website. Perhaps interesting to know even though “gamma engine” is a well-known concept of sterling motors …
https://www.inresol.se/uploaded_files/CX-datasheet1.pdf?v20180403071037
https://www.inresol.se/uploaded_files/TRX-datasheet.pdf?v20180316093245
http://www.Inresol.se
Dear Andrea,
Congratulations with the near to successful tests of the Ecat SK.
1. As far as I know you have mentioned two versions of the SK in the past: the 10 kW and the 100 kW version. Which one was tested?
2. Have you already decided to to take this SK unit in production too?
3. When the SK will be taken into production, will then also your initial output level target rise from 100 MW to 1 GW?
Thanks and kind regards, Gerard
Hello A. Rossi
Your business strategy is to sell energy in the form of heat and not to sell boilers. This sounds like John Davison Rockefeller’s clever strategy for developing petrol lamps for free, and then selling the oil to make them work.
I hope and wish you a similar success to this gentleman
I also hope that the tests on the SK will live up to your expectations. I am looking forward to hearing more about this topic.
All my support to the team
Best regards
Raffaele
Dear Andrea Rossi,
I am glad to hear that the test has gone well, which E-CAT SK will join E-CAT QX for the commercialization at the end 2018 ?
Warm Regards,
Toussaint François