United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

42,086 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Greg Leonard:
    Evolution never stops.
    For the E-Cat X to become a product it takes still time, because I invented the system yesterday, observing her working and thinking to all the theoretical studies ( still incomplete) I made on her in this period, also with the help of Prof. Norman Cook, whose book continues to be a gold mine to me.
    This having been said, to turn it into a product, an enormous work remains to be done, and Leonardo Corporation has to go through many further prototypes. For now let’s see the endurance of the E-Cat system at work.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gerard Mc Ek:
    1- maybe
    2- no
    Warm Regards,
    A.R.

  • Andrea Rossi

    Alessandro Coppi:
    Remember: much work has to be done before we are in front of a product. It is very promising.
    Warm Regards,
    A.R.

  • Alessandro Coppi

    Hi Andrea,
    we can start to see beyond the fog: if you can choose the greater part of production between heat and electric energy, it seem that the electricity production could be more than fifty percent of the nominal power, an unbelievable condition! we are going to override chemical fire and rotating alternators.
    If this is not a dream, from the stone age, this is the bigger step forward for mankind.

    Alessandro Coppi

  • Gerard McEk

    Dear Andrea,
    Your new discovery is extremely important and seems to imply that no mechanical conversion seems necessary to make it useable for any purpose, unless you only need heat. Congratulations for you it is an extraordinary achievement!
    It seems to me it should be easy now to make a fully self supporting E-cat now, perhaps with exception of the start-up mechanism. 1. Can you confirm that?
    My curious mind as an electrical engineer is full of additional questions, I know you want to devote all your time on the new discovery and the 1 MW plant, so I just ask one more: 2. when you draw a higher electrical current from the E-cat, does the LENR process than increase (become more intense)?
    Thank you and kind regards, Gerard

  • Greg Leonard

    Dear AR
    This is all sounding too good to be true.
    Where will it stop? Or will it never stop?
    We, the cheerleaders, and the rest of the world desperately need a product. Who will make the decision that the E-catX is at a stage that mass-production will take place?
    One technical question: If you were to increase the radius of the containing cylinder, would the outer temperature drop, and would that stop the reaction?
    Gratefully yours,
    Greg

  • Paul

    Andrea,

    Can the power of the E-Cat X be throttled up and down?

    If so, what kind of delayed response does it have?

    V/R,

    Paul

  • Tom Conover

    Dear Andrea,

    I must have missed the “Big News” early this morning… Excuse me please. Does the E-Cat X (that is producing electricity) still have full protection by the current United States Patent US 9,115,913 B1?

    Thank you very much!

    Tom

  • Tom Conover

    Dear Andrea,

    Frank Acland just asked you “In the E-Cat X now, which is greater: the heat output, or electricity output?” and you replied “We can choose.” WOW!

    Although I have always been I science fiction fan, I dearly love the study of the true sciences and of logic within and I have to say – your response is either a holiday teaser, or the most incredible step forward in the story of Rossi and the Cats!

    I have only have one question for you tonight, are you just teasing us or are you serious?

    If the E-Cat X is really going beyond any expectancy, I promise to stay calm and wait for the results but, please, please answer this question again, and be serious, “In the E-Cat X now, which is greater: the heat output, or electricity output?”

    Thank you!

    Tom

  • Andrea Rossi

    Frank Acland:
    We can choose.
    Warm Regards,
    A.R.

  • Frank Acland

    Dear Andrea,

    In the E-Cat X now, which is greater: the heat output, or electricity output?

    Many thanks,

    Frank Acland

  • Andrea Rossi

    Bedy Nurn:
    The temperature upon the surface is hotter than where the nickel seats, due to the e.m. fields.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ron Stringer:
    Thank you, yes the E-Cat X is really going beyond any expectancy: but better work and stay calm, because much work remains to do before be sure it works .
    Warm Regards,
    A.R.

  • Ron Stringer

    Dear Dr. Rossi,
    What a Christmas gift! Congratulations on all your accomplishments this year! I hope the new year brings you even greater. Maybe, if all goes well, you will find an even nicer container to work in. Perhaps even a picture on the wall.
    All the best to you, your team and your family.

  • Andrea Rossi

    Steven N. Karels:
    these data are premature, we have to wait until the end of the preliminary tests.
    Warm Regards,
    A.R.

  • Bedy Nurn

    Dr Andrea Rossi:
    How can the nickel in the E-Cat X work if the temperature on the surface is above the melting point?
    Thank you if you can answer,
    Bedy

  • Steven N. Karels

    Dear Andrea Rossi,

    During Ecat-X normal operation, what percentage of the total output power is in the form of electrical energy?

  • Andrea Rossi

    Brokeeper:
    Thank you: working 18 hours per day soomething good had par force to pop out… thanks also to the sustain of you all.
    Warm Regards,
    A.R.

  • Andrea Rossi

    EEStorFanFibb:
    Thank you for the information.
    You can also contact me
    info@leonardocorp1996.com
    I am always curious.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Andreas Moraitis:
    DC, that obviously can be inverted into AC with the inverters.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Daniel Zavela:
    Thank you, but before chanting victory I have to complete the work. But I am so happy of what I saw yesterday…
    Warmest Regards,
    A.R.

  • Andrea Rossi

    Hank Mills:
    1- we’ll see, let me work
    2- yes
    3- yes
    4- obviously
    5- not yet
    Remember: the final results could turn it all negative.
    Let me work, my friend, let me work.
    Warm Regards,
    A.R.

  • Andrea Rossi

    George Cousteaux:
    Thank you, God bless you with a fantastic new Year,
    A.R.

  • Hank Mills

    Dear Andrea,

    I hope you had a good Christmas.

    1 – Can the E-Cat X produce electricity, at all, during self sustain mode (when there is no input power applied)?

    2 – Is the heat output or the electrical output of the E-Cat X, greater?

    3 – When the COP of the E-Cat X (in terms of electrical output) is high, does the COP (only considering heat output) also remain high?

    4 – Does maximizing the electrical output from the E-Cat X in anyway require a diminishment or compromise of the heat output?

    5 – Have you performed an electrical run away test of an E-Cat X? For example, cranking up the reaction rate for a sudden burst of electrical power for a few seconds?

    The progress you have made with the E-Cat technology in such a relatively short time is astounding. The COP of you and your team is far beyond that of any hot fusion research group. With a tiny fraction of the budget and man hours, you have made tremendous progress.

  • Brokeeper

    Dear Andrea,
    Thank you for leaving the best surprise we could expect under the tree. It is the ‘holy grail’ of new energy the world has been hoping for. But most of all; and I’m sure speaking for most of the LENR community; thank you for your tireless self sacrifice to make this happen along with your team (with F9 in mind).
    With much respect,
    Brokeeper

  • Dear Dr. Rossi,

    Although it is too early to call CNN and NBS news, your X-Cat news I have been waiting to hear for 27 years now. Congratulations on your potential breakthrough! Direct electric power production is monumental. Did you have the X-Cat design revelation before of after the anesthesia for your operation? A little downtime seems to spur your creativity (HA, HA). Happy New Year 2016! Thanks for your perseverance and dedication to the tasks at hand.

    Wishing you great continued success and a wonderful vacation someday to give you time to dream more great works. 🙂

    Best Regards,

    Daniel G. Zavela

  • Andreas Moraitis

    Dear Andrea Rossi,

    First of all, congratulations on your latest achievements! Could you perhaps tell us whether the E-Cat X is producing AC or DC?

    Best regards,
    Andreas Moraitis

  • Congratulations Andrea Rossi! That’s wonderful news. If this new ECat X could benefit from incorporating a very low cost, highly stable and long lived capacitor technology, exhibiting stable capacitance across a range of frequencies and temperatures, please be sure to contact eestor corporation.

    The company is about to engage in joint ventures talks with various cap makers.

    They also have a program to explore possible energy storage aspects of their technology with the help of the University of Akron Polymer Chemists.

    Please see http://www.eestor.us for more technical information, specifically third party testing reports by Intertek and expert market analysis by passive component expert Dennis Zogbi.

    Congratulations again!

  • Andrea Rossi

    Frank Acland:
    1- yes and the efficiency is very high
    2- yes and the COP is very high
    But attention: this comes from a work made this last night so it is too soon to chant victory.
    Maybe it breaks up. Right now I am on the E-Cat X and it works making heat and electricity. I hope it is not a dream of half Winter.
    Warm Regards
    A.R.

  • George Cousteaux

    Dear Dr Rossi:
    May God bless your fantastic work and allow us to have within the New Year your game-changing product!
    George

  • Frank Acland

    Dear Andrea,

    Thank you for giving this important news about the E-Cat X. Direct electricity production is a huge breakthrough for the E-Cat, and opens up a whole new world of possibilities for your technology.

    Of course, this brings up many new questions. If I may ask a couple.

    1. Is the amount of electricity being produced at the moment large enough to be practical and useful?
    2. Is there an external input of power required to maintain the production this electricity?

    Congratulations, and many thanks!

    Frank Acland

  • Andrea Rossi

    Curiosone:
    Saturday, Dec. 26, 08.33 a.m.:
    1MW E-Cat: stable
    E-Cat X: working, very promising; no breaks after 42 days 24/7.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Steven N. Karels:
    The data you have guessed are wrong and I cannot give data about the E-Cat X , not even dimensional, until the tests will have been passed through the prelimnar phase. Everything can change substantially, therefore any supposition is premature.
    Warm Regards,
    A.R.

  • Andrea Rossi

    James Watt:
    Here is the big new: yes, the E-Cat X produces directly electric power.
    We are working to harness and make it work.
    The E-Cat X is very, very promising, as I always said. But still: the results of the tests on course could turn out to be NEGATIVE.
    Let’s work on it more and more, as it is necessary before chanting victory.
    Happy New Year to you,
    A.R.

  • James Watt

    Dr Andrea Rossi,
    Can you finally tell us if the E-Cat X is able to produce electricity directly? That would be a Christmas gift!
    Happy New Year,
    J. Watt

  • Steven N. Karels

    Dear Andrea Rossi,

    You have posted the new Ecat-X outputs 3kW of thermal output and the surface temperature is in excess of the melting point of nickel (1455C).

    Therefore, I would estimate the size of the Ecat-X reactor to be around 6″ in length with a diameter of 1/2″. Is this estimate close to your actual Ecat-X reactor dimensions?

  • Curiosone

    Caro Andrea Rossi:
    Can we have an update?
    W.G.

  • Joaqim

    Dr Andrea Rossi
    Thank you for the gift you made to us in 2015 with the US Patent awarded to you. Let us hope that in 2016 your gift will be the E-Cat on the shelves!
    Joaqim

  • Andrea Rossi

    Italo R.:
    1- premature
    2- Yes, I am eating right now a Panettone made in the USA, very well made (Bauducco).
    Warm Regards,
    A.R.

  • Andrea Rossi

    Sebastian:
    1- I am glad you enjoyed “The Concert”. No, the music I listen with the stethoscope is of another kind…
    2- zero
    Warm Regards,
    A.R.

  • Andrea Rossi

    Roger Landmark:
    Thank you,
    Merry Christmas,
    A.R.

  • Andrea Rossi

    Roger Landmark:
    Thank you, I too hope so.
    Warm Regards,
    A.R.

  • Sebastian

    Merry Christmas!

    1) Do you hear Chaykovsky when you listen to your e-tigers? (I enjoyed “the concert” by the way)

    2) What are the chances a second of you US patent gets accepted in the next 3 months?

  • Italo R.

    Dear Dr. Rossi,
    1 – Is the magnetic field produced by E-CatX useful for producing electricity?
    2 – As today it is Christmas, have you inside the container eaten the Italian Panettone?

    Best Regards,
    Italo R.

  • Andrea Rossi

    Pietro F.:
    Thanks, same to you!
    A.R.

  • Andrea Rossi

    Silvio Caggia:
    Onions make me cry.
    Warm Regards
    A.R.

  • Silvio Caggia

    Dear Andrea Rossi,
    Do you remember the onion-cat?
    What about using epitaxial techniques?

    Thin Regards

  • PIetro F.

    Auguri, che il Natale ti regali serenità felicià e……….elettricità 😉 .

    Pietro F.

  • Roger Landmark

    Dr Andrea Rossi,
    the 2015 gave you the US Patent. The 2016 will give us the E-Cat.
    I prey God it will be so and I am sure He will help you so.
    Roger

  • Andrea Rossi

    Milan Koch:
    Yes.
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>