Dear Andrea,
Very interesting the article published on Aftenpost – the major newspaper of Norway- after the Stockholm convincing demonstration of the Ecat QX. For the readers: find it in the press section of http://www.ecat.com
Larisa
Dear Andrea, As you are aware I am interested in the theory behind LENRs and not an academic in nuclear physics but I do have some thoughts as a layman and I do not expect you to give out confidential information before you feel it necessary to do so. I also realize a lot of readers cannot understand the problem of acceptance of your technology with regards the establishment. As I understand it the reactor is sealed into which hydrogen gas is introduced from a container that eventually needs to be replaced. If this is the case then where does the gas go?. To me it seems obvious that the gas becomes plasma and plasma is composed of neutrinos i.e. no more thick condensed gas but neutrinos in a more rarefied state that takes up more space, creates a more compressed environment that creates heat and that neutrinos diffuse out of the reactor. When mass defect readjusts it gives out heat that is equivalent to the energy that created the defect. For me everything seems to work the same way whether it be a refrigerator a heat pump or a bicycle pump (temporary defects) The only difference with LENRs is that it is at the base principle being at the nuclear level and that is why mass defect i.e. a compressed state creates an electromagnetic field i.e. there is nowhere for that which has been squeezed out other than to become an exterior unabsorbed neutral field or a micro event horizon and which upon the defect within the hydrogen gas being released creates a quantity of heat. Hydrogen gas is a storage container of energy like everything in the material world but it is the release of its absolute energy state that makes LENRs so unique, safe and clean. Maybe LENRs being a stand alone phenomena requires a novel explanation outside of present day understanding of nuclear physics or maybe it can be put within. What I am saying is that the E-Cat is the experiment that proves a theory in line with current understanding but at the base atomic level, no need to compare or wrestle with known formulae that involve other phenomenas not connected with LENRs From what I understand its the mechanism that pulls the hydrogen apart i.e. the selected electromagnetic fields of the chosen elements and the low input current to line up i.e. enhance the integrated electromagnetic fields. Same as making a permanent magnet, the difference being two elements not one so as to achieve the required aggressive magnetic field. From my own experience no matter how you understand a phenomena and able to demonstrate the phenomena the ostriches will always put their heads in the sand and deny its existence. Therefore to demonstrate is important but just as important is to explain in easy to understand simple terms using analogies when able. I realize both you and your team are doing a magnificent job to get where you are and I see no reason for your ultimate success. I realize my comments are purely speculative with regards content but I have had the same arrogant problems of my own as many others also have with regards new technology. Regards Eric Ashworth
P.S. Andrea no need to respond to my comments unless I am completely out of line.
Raffaele Bongo:
The bigger the plant, the lower the ratio between energy consumed by the control system and the reactor. It is an integral, not a number.
Warm Regards,
A.R.
I have probably misread my last question, which I am rephrasing.
For a 100 KWH electricity consumption of a 1 MW E-Cat boiler, what is the part consumed by its control unit?
A thousand excuses if the answer is confidential
All my support for the whole team
Best regards
Dear Dr Andrea Rossi,
After hundreds of Professors of Physics have witnessed and replicated LENR, how is possible the Rock and Trolls continue to say that LENR is bad science?
Steven N. Karels:
Yes, the presentation should be in that period.
Date and location will be communicated to the attendants several days before the event, for security reasons.
Warm Regards,
A.R.
I hope to attend your demonstration in January 2019. As you know, I am in Law School. My end-of-the-year break is between December 21, 2018 and January 22, 2019. So if your demonstration can occur between those two dates, that would facilitate me be able to attend it. I am sure you have more important considerations but here is my input. I will understand if the demonstration falls outside of my scheduled times.
Can you tell me whether the demonstration will be in Florida? During the aforementioned off-time, I will be in the Orlando, Florida area visiting my oldest son who lives there. If it is not in Florida, or you cannot give a specific State where it will be, can you state what part of the United States it will be in, e.g., Northeast, Southeast? If not the Northeast or Southeast, then I mostly likely will be unable to attend your demonstration.
Regarding the power consumption of the E-Cat 1 MW, can you tell us what percentage is consumed by the control system and by the reactor itself?
All my support for your intense work.
Best regards
Gerardo:
Physics manuals, to maintain on the fingertips the fundamentals, “Models of the Atomic Nucleus” of Norman Cook, read for the umpth time to dig for new ideas, “The Pelikan Brief” of John Grisham, a biography of Alexander the Great.
Warm Regards,
A.R.
Frank Acland:
1- the work is on course, we have to make more experiments
2- we will make a publication if we will find results that have a dignity to be published.
3- of course
Warm Regards,
A.R.
You say that you have already carried out testing with Carl-Oscar Gullstrom.
1) Have your theoretical ideas about what is happening with E-Cat been confirmed?
2) Have you learned anything new from this testing, and if so, what can you share with us?
3) Will testing with COG continue?
JPR:
Our patent has been granted in USA, Canada, Mexico, Brazil, Chile, all the Countries included in the European Patent Office convention, Russia, Japan, China, Australia, South Africa. All the Countries where we have applied for the granting of our patent have granted it.
Warm Regards,
A.R.
Regarding the SK testing you have mentioned will be taking place in Aug/Sep:
1) Has the testing started?
2) Have you personally making the reactors, or is this something other team members are doing?
3) Are you personally going to be supervising SK testing or is this something other team members will be involved with.
And on a different subject:
4) Have you done any testing with Carl-Oscar Gullstrom yet on the theoretical aspects of the E-Cat?
Dr Andrea Rossi:
I want to join the army of the persons that congratulate you for the convincing demo of Stockholm: I got the video on youtube “demonstration of the Ecat QX in Stockholm Nov 24 2017”
Dale
Urban Fredell:
Thank you for your attention to the work of our Team.
Answers:
1- give precise information to the market about our service
2- he he he
I don’t care the Rock and Trolls
3- yes
Warm Regards,
A.R.
Dr Rossi,
I am following your work since the year 2011 and I can say you made a remarkable progress.
Your demo in Stockholm on Nov 24 2017 has been well done and convincing.
For this reasons let me formulate these questions:
1- what is the reason of your presentation on January 2019?
2- is it that you want to sting the Rock and Trolls?
3- will be invited important companies also from Sweden?
Thank you if you can answer,
From Sweden with love
Urban Fredell
Tamal:
In Nuclear Physics are defined as “Resonances” the virtual elementary particles, which are not actual particles, but waves raised during the interactions between stable particles. The life of virtual particles is normally in the order of 10^-23 seconds.
The glossary of http://www.ecat.com does not contain theoretical terms.
Warm Regards,
A.R.
Dear Andrea Rossi,
I’ve been checking ecat.com, “Glossary” sub page and haven’t found an explanation of the term “resonance”.
Does resonance take place in ECat’s LENR process, not in the electrical instruments of control unit (resonance is the fundamental in most such electrical circuits), but in the ECat’s reactor?
Kind regards and good luck with the work,
Tamal
Are your industrialization efforts completely self-financed or does it depend on others and/or future test results? It’s exciting to realize that E-Cat industrialization may finally be upon us. Good luck.
During your R & D on the QX you indicated, if I remember correctly, that the E-Cat would be able to produce heat around 0.01 $ the KW and electricity at about 0.03 $. the KW.
Are these indications always news?
If so, do these indications take into account the cost of power consumption required to operate the E-Cat?
Thank you if you can answer
I wish you great news of your upcoming tests
Best regards
Chuck Davis:
The taxes on the profits from heat sales will be the same taxes that have to be paid upon the sales of any other product.
Warm Regards,
A.R.
Brad Olsen:
We put a hold on it because in the market do not exist Stirling engines with due reliability at acceptable prices per kW.
Warm Regards,
A.R.
Dear Andrea, As you aware the majority of the general public do not like nuclear power plants because of there safety records and dangerous nuclear wastes that they produce. Most people do not know how these reactors produce heat, only those working in the industry need to know and do know. My question is, Do you believe that you need to explain how your technology produces heat or will you rely solely upon safety validation certificates to address any client concerns?. Regards, Eric Ashworth
Eric Ashworth:
Thank you for your insight,
Warm Regards,
A.R.
Erich:
Not yet.
Warm Regards,
A.R.
Larisa Kristine:
Thank you for your attention,
Warm Regards,
A.R.
Dear Andrea,
Very interesting the article published on Aftenpost – the major newspaper of Norway- after the Stockholm convincing demonstration of the Ecat QX. For the readers: find it in the press section of http://www.ecat.com
Larisa
Did you employ a professional designer to make the body of the Ecat?
Dear Andrea, As you are aware I am interested in the theory behind LENRs and not an academic in nuclear physics but I do have some thoughts as a layman and I do not expect you to give out confidential information before you feel it necessary to do so. I also realize a lot of readers cannot understand the problem of acceptance of your technology with regards the establishment. As I understand it the reactor is sealed into which hydrogen gas is introduced from a container that eventually needs to be replaced. If this is the case then where does the gas go?. To me it seems obvious that the gas becomes plasma and plasma is composed of neutrinos i.e. no more thick condensed gas but neutrinos in a more rarefied state that takes up more space, creates a more compressed environment that creates heat and that neutrinos diffuse out of the reactor. When mass defect readjusts it gives out heat that is equivalent to the energy that created the defect. For me everything seems to work the same way whether it be a refrigerator a heat pump or a bicycle pump (temporary defects) The only difference with LENRs is that it is at the base principle being at the nuclear level and that is why mass defect i.e. a compressed state creates an electromagnetic field i.e. there is nowhere for that which has been squeezed out other than to become an exterior unabsorbed neutral field or a micro event horizon and which upon the defect within the hydrogen gas being released creates a quantity of heat. Hydrogen gas is a storage container of energy like everything in the material world but it is the release of its absolute energy state that makes LENRs so unique, safe and clean. Maybe LENRs being a stand alone phenomena requires a novel explanation outside of present day understanding of nuclear physics or maybe it can be put within. What I am saying is that the E-Cat is the experiment that proves a theory in line with current understanding but at the base atomic level, no need to compare or wrestle with known formulae that involve other phenomenas not connected with LENRs From what I understand its the mechanism that pulls the hydrogen apart i.e. the selected electromagnetic fields of the chosen elements and the low input current to line up i.e. enhance the integrated electromagnetic fields. Same as making a permanent magnet, the difference being two elements not one so as to achieve the required aggressive magnetic field. From my own experience no matter how you understand a phenomena and able to demonstrate the phenomena the ostriches will always put their heads in the sand and deny its existence. Therefore to demonstrate is important but just as important is to explain in easy to understand simple terms using analogies when able. I realize both you and your team are doing a magnificent job to get where you are and I see no reason for your ultimate success. I realize my comments are purely speculative with regards content but I have had the same arrogant problems of my own as many others also have with regards new technology. Regards Eric Ashworth
P.S. Andrea no need to respond to my comments unless I am completely out of line.
Raffaele Bongo:
The bigger the plant, the lower the ratio between energy consumed by the control system and the reactor. It is an integral, not a number.
Warm Regards,
A.R.
Hello A. Rossi
I have probably misread my last question, which I am rephrasing.
For a 100 KWH electricity consumption of a 1 MW E-Cat boiler, what is the part consumed by its control unit?
A thousand excuses if the answer is confidential
All my support for the whole team
Best regards
Raffaele
Pierre:
Just competition to get funds. This is what trolls are paid for.
Warm Regards,
A.R.
AF:
Maybe.
Warm Regards,
A.R.
Ada:
Thank you for your attention to our work,
Warm Regards,
A.R.
Dr Rossi,
I like the video on Youtube with the November 24 demo in Stockholm of the Ecat QX
Will the 10 kW Ecat SK be the favorite module for higher power?
Dear Dr Andrea Rossi,
After hundreds of Professors of Physics have witnessed and replicated LENR, how is possible the Rock and Trolls continue to say that LENR is bad science?
Raffaele Bongo:
Very low.
Warm Regards,
A.R.
Steven N. Karels:
Yes, the presentation should be in that period.
Date and location will be communicated to the attendants several days before the event, for security reasons.
Warm Regards,
A.R.
Dear Andrea Rossi,
I hope to attend your demonstration in January 2019. As you know, I am in Law School. My end-of-the-year break is between December 21, 2018 and January 22, 2019. So if your demonstration can occur between those two dates, that would facilitate me be able to attend it. I am sure you have more important considerations but here is my input. I will understand if the demonstration falls outside of my scheduled times.
Can you tell me whether the demonstration will be in Florida? During the aforementioned off-time, I will be in the Orlando, Florida area visiting my oldest son who lives there. If it is not in Florida, or you cannot give a specific State where it will be, can you state what part of the United States it will be in, e.g., Northeast, Southeast? If not the Northeast or Southeast, then I mostly likely will be unable to attend your demonstration.
Hello A. Rossi
Regarding the power consumption of the E-Cat 1 MW, can you tell us what percentage is consumed by the control system and by the reactor itself?
All my support for your intense work.
Best regards
Raffaele
Mohammad Edler:
Not yet, but not for my choice: simply, I have not been contacted yet.
Warm Regards,
A.R.
Gerardo:
Physics manuals, to maintain on the fingertips the fundamentals, “Models of the Atomic Nucleus” of Norman Cook, read for the umpth time to dig for new ideas, “The Pelikan Brief” of John Grisham, a biography of Alexander the Great.
Warm Regards,
A.R.
Elton Telles:
I am not going to retire.
Warm Regards,
A.R.
Hi, you have a very easy way to make us understand difficult concepts of Physics. You could make a great teacher.
Maybe when you will retire?
Dear Dr Andrea Rossi,
Which readings did you do during your holidays?
Just curious.
Do you have contacts also with Islamic people for the service offered by your company?
Frank Acland:
1- the work is on course, we have to make more experiments
2- we will make a publication if we will find results that have a dignity to be published.
3- of course
Warm Regards,
A.R.
Dear Andrea,
You say that you have already carried out testing with Carl-Oscar Gullstrom.
1) Have your theoretical ideas about what is happening with E-Cat been confirmed?
2) Have you learned anything new from this testing, and if so, what can you share with us?
3) Will testing with COG continue?
Many thanks,
Frank Acland
Sam:
Thank you for the link,
Warm Regards,
A.R.
Hello Dr Rossi
This is an interesting video about a product.
https://youtu.be/J5UdcjdXk88
Regards
Sam
Frank Acland:
1- No, will start the next week
2- All the team is involved
3- I am supervising
4- Yes
Warm Regards,
A.R.
JPR:
Our patent has been granted in USA, Canada, Mexico, Brazil, Chile, all the Countries included in the European Patent Office convention, Russia, Japan, China, Australia, South Africa. All the Countries where we have applied for the granting of our patent have granted it.
Warm Regards,
A.R.
Kuba:
Yes.
Warm Regards,
A.R.
Dr Andrea Rossi,
The January presentation will be broadcasted in streaming, so that everybody will be able to assist?
Dear Andrea,
Can you confirm in which Countries your patent has been granted and in which is it pending?
JPR
Dear Andrea,
Regarding the SK testing you have mentioned will be taking place in Aug/Sep:
1) Has the testing started?
2) Have you personally making the reactors, or is this something other team members are doing?
3) Are you personally going to be supervising SK testing or is this something other team members will be involved with.
And on a different subject:
4) Have you done any testing with Carl-Oscar Gullstrom yet on the theoretical aspects of the E-Cat?
Thank you very much,
Frank Acland
Dale Askvig:
Thank you for your kind attention to our work,
Warm Regards,
A.R.
Dr Andrea Rossi:
I want to join the army of the persons that congratulate you for the convincing demo of Stockholm: I got the video on youtube “demonstration of the Ecat QX in Stockholm Nov 24 2017”
Dale
Urban Fredell:
Thank you for your attention to the work of our Team.
Answers:
1- give precise information to the market about our service
2- he he he
I don’t care the Rock and Trolls
3- yes
Warm Regards,
A.R.
Dr Rossi,
I am following your work since the year 2011 and I can say you made a remarkable progress.
Your demo in Stockholm on Nov 24 2017 has been well done and convincing.
For this reasons let me formulate these questions:
1- what is the reason of your presentation on January 2019?
2- is it that you want to sting the Rock and Trolls?
3- will be invited important companies also from Sweden?
Thank you if you can answer,
From Sweden with love
Urban Fredell
Raffaele Bongo:
the numbers will have to be verified in the context of industrial operations.
Warm Regards,
A.R.
Peter Metz:
We have also Partners and Clients.
Warm Regards,
A.R.
Tamal:
In Nuclear Physics are defined as “Resonances” the virtual elementary particles, which are not actual particles, but waves raised during the interactions between stable particles. The life of virtual particles is normally in the order of 10^-23 seconds.
The glossary of http://www.ecat.com does not contain theoretical terms.
Warm Regards,
A.R.
Dear Andrea Rossi,
I’ve been checking ecat.com, “Glossary” sub page and haven’t found an explanation of the term “resonance”.
Does resonance take place in ECat’s LENR process, not in the electrical instruments of control unit (resonance is the fundamental in most such electrical circuits), but in the ECat’s reactor?
Kind regards and good luck with the work,
Tamal
Dear Andrea Rossi,
Are your industrialization efforts completely self-financed or does it depend on others and/or future test results? It’s exciting to realize that E-Cat industrialization may finally be upon us. Good luck.
Sincerely,
Peter Metz
Hello A. Rossi
During your R & D on the QX you indicated, if I remember correctly, that the E-Cat would be able to produce heat around 0.01 $ the KW and electricity at about 0.03 $. the KW.
Are these indications always news?
If so, do these indications take into account the cost of power consumption required to operate the E-Cat?
Thank you if you can answer
I wish you great news of your upcoming tests
Best regards
Raffaele
Chuck Davis:
The taxes on the profits from heat sales will be the same taxes that have to be paid upon the sales of any other product.
Warm Regards,
A.R.
Brad Olsen:
We put a hold on it because in the market do not exist Stirling engines with due reliability at acceptable prices per kW.
Warm Regards,
A.R.
Dr Rossi,
How is going your R&D with the Stirling engines?
Brad Olsen
How do you think will be taxated the heat made by the Ecats?
Chuck Davis
Eric Ashworth:
Surely this is a point.
Information will be important.
Warm Regards,
A.R.
Dear Andrea, As you aware the majority of the general public do not like nuclear power plants because of there safety records and dangerous nuclear wastes that they produce. Most people do not know how these reactors produce heat, only those working in the industry need to know and do know. My question is, Do you believe that you need to explain how your technology produces heat or will you rely solely upon safety validation certificates to address any client concerns?. Regards, Eric Ashworth