United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

21,813 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Gerard McEk:
    The answer is probably yes.
    Warm Regards,
    A.R.

  • Gerard McEk

    Dear Andrea,
    Maybe I was not clear in my previous question. I did’n want you to explain details of the nuclear reaction, but basically I just asked you if you could confirm if the loss of nuclear mass of the fuel equates to the energy production of the E-cat.
    If you do not want to publish that detail either, please say so.
    Thanks and kind regards, Gerard

  • Andrea Rossi

    Gerard McEk:
    Thank you for your link.
    The study of the ashes of fuel is confidential and I am not going to give more information after the information already has been given.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Isaac:
    Moreless yes. Obviously the measurements with the spectrometer using the Wien and Boltzmann equations are more precise, because based upon constants of laws, not on devices that can have relevant errors, like heat exchangers and pipings.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com
    to find comments published in other posts of this blog.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ruslan:
    We work on Skype and through email, but also he comes when necessary to Miami to make the experiments. He is very youung, but very prepared and has theoretical bases extremely solid, made in the University of Uppsala, where, as you write, he is making his PhD. In November we will make an important work, related to the paper we wrote. We are working also on the same subject with a Prof of Physics that prefers not to be cited, who teaches Physics in a prestigious University.
    Thank you for your attention to our work,
    Warm Regards,
    A.R.

  • Ruslan

    Dr Andrea Rossi,
    I watched the video with the lecture of Carl-Oscar Gullstrom presented on Nov 24 during the Ecat QX demo in Stockholm. I found the link to it in http://www.ecat.com.
    He is a researcher of the faculty of Physics of the University of Uppsala, I knew he is making his PhD, and you are in Miami: how can you work together across the Atlantic Ocean and reach the impressive scientific level of the paper you published? By the way, congratulations for your theoretical research, it looks quite promising and surely is very advanced.
    Best Regards,
    Ruslan

  • Isaac

    When you compare the COP measured by the Wien and the Boltzmann equations with the calorimeter made across a heat exchanger do they correspond?

  • Gerard McEk

    Dear Andrea,
    Reading the paper “Electron structure, Ultra-dense Hydrogen and LENR ” of Antonino Di Tommaso and Giorgio Vassallo of the University of Palermo-Italy, I remembered a piece of Andrea Calaon, also mentioning the Zitterbewegung of electrons. I couldn’t find his paper, but here is a reference to a discussion in 2015 of Calaon:
    http://disq.us/url?url=http%3A%2F%2Fe-catworld.com%2F2015%2F05%2F19%2Fthe-basics-of-cold-fusion-response-to-axil-axil-andrea-calaon%2F%3A8Nt1ddeRxUQaw03Lr4nr3da9_Ro&cuid=2168707
    I am not sure they they can be compared.
    Just a question: You/Prof. Cook/Gullstom must have studied the nuclear composition of both fuel and ash. Can you, based on the changes in nuclear composition between the two, explain the experienced excess heat of the E-cats?
    Thanks and kind regards, Gerard

  • Andrea Rossi

    Domenico Canino:
    No; he attended our test made in Stockholm on November 14th 2017.
    Warm Regards,
    A.R.

  • Andrea Rossi

    CC:
    I think so. This paper is as genial as simple.
    Warm Regards,
    A.R.

  • domenico canino

    dear Andrea,
    did Giorgio Vassallo test an e-cat before writing on LENR?
    thanks if you can answer;
    regards

  • Andrea Rossi

    Davide:
    If the temperature is in the order of electronvolts the sole possible way is to use spectrometry , make T= 2900/Lambda,to get the T in K.
    Then use the equation of Boltzmann: T ( Celsius )^4 * Sigma * S (m^2) * Epsilon. This method is based on constants, therefore is very precise, not depending on conventional measuring systems. It depends only on numbers and there is not margin of errors due to phenomenological effects like, for example, efficiency, heat loss, etc.
    Warm Regards,
    A.R.

  • davide

    Dr Andrea Rossi,
    What do you think is the best way to measure the power of a plasma reactor like the Ecat SK?
    Davide

  • CC

    Thank you for the link to the interesting paper of Di Tommaso and Vassallo.
    Do you think it is conciliable with the work of you and Gullstrom we saw in the video of the Stockholm lecture of Gullstrom?
    CC

  • Andrea Rossi

    Dear Readers:
    I have read today this very interesting paper: “Electron Structure, Ultra-Dense Hydrogen and Low Energy Nuclear Reactions”, published on September 30 2018 by Antonino Oscar Di Tommaso ( Università Degli Studi di Palermo, Department of Energy, Information Engineering and Mathematical Models ) and by Giorgio Vassallo ( Università degli Studi di Palermo, Department of Industrial and Digital Innovation ).
    Here are elements that can help the theory we are working on: Zitterbewegung of electrons that obey the Dirac equation when in rapid motion can act as catalizers of virtual particles and antiparticles when the T of the field reaches their mass.
    Here is the link of this very interesting paper:
    http://vixra.org/pdf/1809.0575v1.pdf
    Warm Regards,
    A.R.

  • Andrea Rossi

    R.R.:
    I have taken the design of a gas turbine as a model, obviously with due modifications,
    Warm Regards,
    A.R.

  • Andrea Rossi

    VSG:
    Good luck,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Jim:
    Yes.
    Warm Regards,
    A.R.

  • Jim

    Dear Dr Andrea Rossi,
    I am a high school student.
    Is it correct to say that fundamental forces in nuclear physics are gravity and electromagnetic interactions?
    Thank you,
    Jim

  • VSG

    Today I bet 100 Euro that in January there will be no presentation at all.
    I will win 200 Euro!
    Thank you,
    Very Sceptic Guy

  • R.R.

    Dr Rossi,
    Is the combustion room of the Ecat SK similar to a combustion room of a gas turbine?
    Thanks if you can answer,
    Roberto

  • Andrea Rossi

    Steven N. Karels:
    Interesting.
    Merits to be studied upon.
    Warm Regards,
    A.R.

  • Steven N. Karels

    Dear Andrea Rossi,

    I designed, built and installed four village water purification system in Guatemala a few years ago as a trial project. Perhaps the eCat SK could be adapted to support the need for potable water?

    In many places, there is water but it is contaminated with pathogens (protozoa, bacteria and viruses). These pathogens are sensitive to 260 – 270 nm UV light – it causes them to be unable to reproduce.

    If a system was designed to filter town water to about 5 micron particular size and then expose the water to intense UV radiation, the result would be potable water (drinkable).

    The problem with my system was it was limited to about one gallon per minute and used a 6W UV lamp. an eCat SK could be scaled up to provide drinkable water at a rate to supply water to an entire town.

    Note: You don’t need to boil the water, just illuminate with the short wavelength UV for a long enough period of time, typically a few seconds to treat the water.

    Thoughts?

  • Andrea Rossi

    Koen Vandewalle:
    Sorry, but the question of the Reader was purely theoretical and had nothing to do with the Ecat, as well as my answer.
    Warm Regards,
    A.R.

  • Koen Vandewalle

    Dear Dr Andrea Rossi,
    No, I meant the cleanup of radioactive waste from other sources.
    If the formation of resonances can help to change neutrons into protons and vice-versa, then the effect in the E-Cat may be able help and speed up the decay of hazardous substances.
    Reasonable, resonant regards,
    Koen

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com
    to read comments published today in other posts of this blog.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Koen Vandewalle:
    I think you have to read again my answer to Roy. It has nothing to do with your comment.
    Anyway: the radiations inside the Ecat are thermalized.
    Warm Regards,
    A.R.

  • Koen Vandewalle

    Dear Dr Andrea Rossi,
    from your answer to Roy, may I understand that the scientific team is nearing a solution for neutralizing radioactive materials ?
    Kind Regards,
    Koen.

  • Andrea Rossi

    Roy
    To make it short:
    Elementary particles show up as particle multiplets, and proton-neutron compose the most known multiplet.
    Proton and neutron are two different isotopic quantic status of the same particle.
    Basically, the mechanism is that by interaction with the weak forces a proton spits out a W+ and turns into a neutron that eventually spits out a W- and is turned into a proton. The energy conservation law- apparently barring these interactions- is respected because these interactions pass through the formation of resonances.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Britt Horak:
    I’d say 99%.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Anonymous:
    Yes. We are preparing the tools for an important experiment that will be performed at the beginning of November.
    Warm Regards,
    A.R.

  • Anonymous

    Dr Andrea Rossi:
    Is it continuing your collaboration with Carl-Oscar Gullstrom for the theory of the Roaai Effect?
    Cheers
    Nat

  • Britt Horack

    Is your presentation of the industrialized Ecat in January 2019 100% sure?

  • Roy

    Dear Dr Andrea Rossi,
    I read that the Higgs boson gives charge only to the force carrying Bosons of the weak forces and the electrically charged Fermions: what about neutrons? They have mass too!
    Thanks for the answer,
    Roy

  • Andrea Rossi

    Raffaele Bongo:
    Thank you for your kind wishes.
    We will supply heat. What the Customer will do with our heat is his business.
    Warm Regards,
    A.R.

  • Raffaele Bongo

    Hello A. Rossi

    Your customer will turn some of the heat into electricity with the 40 MW boiler you will install.

    Can you tell us what electric power is he hoping to get with this plant?

    Thank you if you can answer
    Better health and the better for the work of your team
    Best regards
    Raffaele

  • Andrea Rossi

    Anonymous:
    It should be, due to the expected COP.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Szymon Blachuta:
    Good question.
    You must make a distinction between reaction and reactor. I said the reactor does not emit radiations beyond the margin of error of the measurement system.
    Thank you for your kind wishes,
    Warm Regards,
    A.R.

  • Szymon Blachuta

    Dear Andrea Rossi,
    in your patent (US 9,115,913 B1) there is a mention of radiation shield.
    Does the reaction emit some radiation?
    If no, as you mentioned earlier, why radiation shield in the apparatus?
    Thanks for answer.
    My best to you and your Team.
    Kind Regards,
    Szymon

  • Anonymous

    Dr Rossi:
    Are you sure that coupling the Ecat SK in a genset the efficiency will be high?

  • Andrea Rossi

    Buck:
    Yes, to harness the heat exchange is not easy.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Anonymous:
    Try this: assuming it is initially like a sphere, it gets like a disk with the axis parallel to the line of motion and would become old later. Much later.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Mida Riva:
    I won’t release interviews before the presentation we will make in January, but I can answer to your questions here:
    1- we are talking of LENR
    2- see our US patent US 9,115,913 B1 ( just google “patent US 9,115,913 B1” )
    3- obviously not ( it would should it work with electron’s energy quantum status )
    4- about the physics, see our US patent above, about future applications: any wherein heat is utilized
    Warm Regards,
    A.R.

  • Andrea Rossi

    Italo R.:
    I cannot answer in positive or in negative for issues related to what happens inside the Ecat.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Riccardo Pompili:
    Thank you for your kind sustain.
    Answers:
    1- we are not going to rent or sell the Ecats, we are going to sell the heat, for the moment only to industrial concerns, in the measure requested by the Clients
    2- this issue depend on the specifics of the contract and are related only to the sale of heat
    3- yes
    4- same as in the point 2
    5- yes, when we will decide to sell the Ecats
    Warm Regards,
    A.R.

  • riccardo pompili

    Dear Andrea Rossi, I’m following you for the last 10 years, step by step, little progress to little progress, I’m really impressed by what you are achieving and proud of you as Italian and as human being. I’m living in Ireland since 2008 and I’m spreading the news about what you are doing. Here many people I have spoken to, are very keen about the e-cat and its impact on our lives and interested in getting one of your reactor. We are a small group so far, but I guess we can get more people involved if we have more practical information about what will be the e-cat on sale or on rent.
    I guess that the domestic device is still far away for Safety reason, but I hope the industrial reactor you are going to put on the market would be manageable enough to suit small house compounds, apartment blocks or small businesses.
    So here few questions (even if they may come too early):

    1- How big will be the e-cat you are going to rent/sell? (power/size)

    2- Can you give us, even privately, and idea (even vague) of costs of installation, transport, maintenance, rent or sale?

    3- Should we have to contact Hydro fusion in our territory for commercial issues?

    4- How will works the relation between us the customers and your company? (managing, servicing, payments etc.)

    5- I have already asked with an e-mail to the Leonardo Corporation (if I remember well) to be a possible buyer of your device few years ago, is that implies any priority for us?

    Ireland is small Country at the periphery of the Empire, as to say, but Irish People have pioneer spirit and like to walk into unknown lands, moreover where I live, West Cork, is a place full of skilled people with a strong feeling of independence who will fully appreciates the value of what you are doing.

    I wish you all the best

    Riccardo

  • Italo R.

    Dear Dr. Rossi,

    Alexander Parkhomov et al. have found “strange radiation” during their LENR experiments as described here:

    http://e-catworld.com/wp-content/uploads/2018/10/Strange-Radiation.pdf

    Can you tell us if you’ve ever found something similar during your research and development?

    Kind Regards,

    Italo R.

  • Mida Riva

    Buongiorno, mi chiamo Mida Riva e sto cercando di realizzare un mini documentario sul dispositivo Ecat, vorrei pertanto chiederle se fosse disponibile a realizzare un video nel quale dovrebbe rispondere ad alcune domande:

    1 Ecat stiamo parlando di fusione fredda o di qualcos’altro?
    2 Qual’è il combustibile dell’Ecat?
    3 L’Ecat viola le leggi della termodinamica ?
    4 La fisica dell’Ecat e le sue applicazioni future

    inoltre ci sono dispositivi in funzione in questo momento che possono essere filmati? Se si dove. Grazie per la sua disponibilità.

    English version:

    Hello, my name is Mida Riva and I’m trying to make a mini documentary on the Ecat device, so I would like to ask you if it’s available to make a video in which you should answer some questions:

    1 Ecat: are we talking about cold fusion or something else?
    2 What is the Ecat fuel?
    3 Does Ecat violate the laws of thermodynamics?
    4 The physics of Ecat and its future applications

    also there are devices in operation right now that can be filmed? If you where. Thanks for your time.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>