1) Are utilizing some method of preventing the electrodes of the device from experiencing any degree whatsoever of sputtering by charged ions and neutral atoms striking them?
2) If you are utilizing a surface protrusion on the electrodes to enhance the electric field to reduce the voltage required to initiate the plasma, is this protrusion self-regenerating?
3) Could one QX device fitting inside one closed cylinder utilize multiple emitter tips to produce multiple columns of plasma to maximize the output energy?
4) At the upcoming demonstration, would you be willing to introduce anyone who can testify that they built a QX themselves and achieved the same results as yourself? I think this would go far to countering some of the vitriol from the imbeciles that will be screaming that it only “appeared” to work because you “rigged” it to do so. If there is even one person that works for your client that you would trust to build a QX and share their results as well at the demonstration (even if only during a brief slideshow of the data), I would urge you to allow them to do so.
Dr Rossi:
Did you find in your spectrometry measurements of the T of the Ecat also peaks in the range of 430-440 nm?
This would corroborate the hypothesis of Prof Giorgio Vassallo related to your intuition of the virtual Fermions that could raise from their field when the T of the field reaches the mass of the same elementary particles.
Cheers
Prof
Dear Dr Andrea Rossi,
The progress you made in one year is impressive: you reached several KW of power with the industrialized Ecat SK in 2018, one year after the 20 W Ecat QX shown in Stockholm in the convincing video published on youtube (November 24 2017). Do you still spare the time to play tennis with your wife?
Godspeed,
Mary
“Electricity being the most practical source for distributing energy through a grid, it is my opinion that E-Cats will be mostly used for such a purpose. Hence my question: What is currently the best practical set up of a system that couples an E-Cat based heat source and a steam-turbine/alternator system, in terms of Mega Watts electrical?”
My hope is that the SK/turbine combination will be found to be competitive with current grid sources of power for communities of a size of, say, 5,000 or more households. If so, then the present grossly inefficient, monolithic, centralized, monopolistic power providers will be forced to compete (just as participants in nearly all other industries are) and radically reduce their waste of resources if they are to remain in business.
The benefits to the economy and to living standards would be appreciable.
Dear Dr Rossi,
I recently survived Hurricane Michael in the Florida Panhandle. We lost many public buildings in the storm. This experience motivated me to research stronger structures. The strongest and most economical structure appears to be the “Monolithic Concrete Dome”. It is earthquake-proof, hurricane-proof, and tornado-proof up to F-5 category. It is cheaper to build than traditional box-type construction. It is so energy efficient that the cost of the foundation, floor, and outer shell will pay for themselves in 15 to 20 years in energy savings.
The round footprint may not be ideal for straight-line assembly line manufacturing. It seems to me that you could overcome the round footprint by using an elongated tubular (hemi-tubular) structure connected to two half-domes. https://www.monolithic.org/domes
Best regards,
Iggy
Just curious based upon your theoretical work, will your explanation how the ecat works open up a total new industry of discovering new technology even outside of lenr? what I try to say, electricity was the driving force behind all the discoveries made afterwards, like telephone, electronic microscope, will your theorie once proven to be correct have a similar effect and open up a whole new era of scientific discoveries to be made just based upon your theory?
sorry if I am just a dummy , I would love to hear your opinion or simplified answer.
For the SK variant of the eCat technology — is Hydrogen a required element for the reaction? Would Deuterium, Helium-3, one or both isotopes of Lithium or one of more isotopes of Boron suffice for an exothermic reaction with Nickel?
a) Is this client currently involved in preparing to produce E-Cats?
b) His this client been involved in testing SK reactors?
c) Have you been spending time working at this client’s facilities?
d) In terms of firepower, would this client be one of the top companies in its business sector?
Many thanks and best wishes for the upcoming presentation.
Dear Andrea.
I’m referring to the new automated production-line for E-Cat-SK.
What will be the capacity for the SK-10 per day?
How many such production lines are you planning to acquire over the next years?
Regards Svein Henrik.
@Martin Himpe:
we must remember that Andrea Rossi told us that the COP he got in Doral during the test of the 1 MW plant has been reached thanks also to the fact that he operated the plant personally every day, 16 hours per day, while his team operated the plant during the remaining 8 hours, so that the plant has ben attended to by the men of Leonardo 24/7 for one year, a situation that is unthinkable for the plants he will install in the factories of his customers. I expect the COP will have to be reduced to make the Ecat reliable in normal situations.
Elvis
Thomas Florek:
At that age I will be able to rival the Rock and Trolls! With you, we will invent the “Rock the Trolls” music, characterized by strong accents on the cymbals. I have ready the first title: “Cymbals vs cymballs”
Warm Regards,
A.R.
When the installation of the plant will be completed at the customer and will be started, will it be necessary to leave on site technicians for maintenance and monitoring in addition to remote control?
Good health and all my support for the project
Best regards
Raffaele
TheFutureIsNow:
Thank you for your kind words and the panaceic suggestion…
Answers:
1- I cannot answer in positive or in negative to this question
2- same as in 1
3- no
Warm Regards,
A.R.
Is there a technical reason why eCat technology could not be used with a heat to electricity generation unit (solid state, no turbines)? If the effective COP is sufficiently high, even the relatively low conversion efficiencies (5 – 8%) could be overcome. And suitable circuitry and energy storage (battery or capacitor) can overcome safety (feedback) concerns. Can an “eCat Battery” be realized. I imaging applications such as drones and remote applications (the moon) would be possible. I would guess that if your effective, long-term COP averaged over 50, it should be doable.
Take care of your health. We need you on this planet for decades to come! I’m unsure of your medical history, but there are a ton of great supplements to try. One that’s a virtual panacea is broccoli extract due to the sulforaphane content.
1) Do you think that atomic hydrogen and lithium atoms in a plasma can interact in such a way that the atomic hydrogen transforms into a form that’s more effective at inducing nuclear reactions with other elements?
2) If such a transformation of H can take place (regardless what it transforms into) do you think that the resulting product can be absorbed by nickel in Ni-H systems such as the E-Cat?
3) Have you ever ran a QX until it became depleted of hydrogen/lithium and stopped working?
CC:
I am healing well, and, what is most important, I am working very well. Besides, the firepower of our main Client will make soon my person less important.
Warm Regards,
A.R.
Prof:
Yes, we got peaks in that area,
Warm Regards,
A.R.
TheFutureIsNow:
1- confidential
2- confidential
3- confidential
4- no and I don’t care the Rock and Troll rants
Warm Regards,
A.R.
Dear Andrea,
1) Are utilizing some method of preventing the electrodes of the device from experiencing any degree whatsoever of sputtering by charged ions and neutral atoms striking them?
2) If you are utilizing a surface protrusion on the electrodes to enhance the electric field to reduce the voltage required to initiate the plasma, is this protrusion self-regenerating?
3) Could one QX device fitting inside one closed cylinder utilize multiple emitter tips to produce multiple columns of plasma to maximize the output energy?
4) At the upcoming demonstration, would you be willing to introduce anyone who can testify that they built a QX themselves and achieved the same results as yourself? I think this would go far to countering some of the vitriol from the imbeciles that will be screaming that it only “appeared” to work because you “rigged” it to do so. If there is even one person that works for your client that you would trust to build a QX and share their results as well at the demonstration (even if only during a brief slideshow of the data), I would urge you to allow them to do so.
Thank you.
Dr Rossi:
Did you find in your spectrometry measurements of the T of the Ecat also peaks in the range of 430-440 nm?
This would corroborate the hypothesis of Prof Giorgio Vassallo related to your intuition of the virtual Fermions that could raise from their field when the T of the field reaches the mass of the same elementary particles.
Cheers
Prof
Dear Dr Andrea Rossi,
The progress you made in one year is impressive: you reached several KW of power with the industrialized Ecat SK in 2018, one year after the 20 W Ecat QX shown in Stockholm in the convincing video published on youtube (November 24 2017). Do you still spare the time to play tennis with your wife?
Godspeed,
Mary
Rodney Nicholson:
Thank you for your insight.
Warm Regards,
A.R.
Frank Acland:
This is part of the theoretical work we are working upon. It is premature to give answers.
Warm Regards,
A.R.
Iggy Dalrymple:
Thank you for the interesting suggestion. I take advice of it.
Warm Regards,
A.R.
“Electricity being the most practical source for distributing energy through a grid, it is my opinion that E-Cats will be mostly used for such a purpose. Hence my question: What is currently the best practical set up of a system that couples an E-Cat based heat source and a steam-turbine/alternator system, in terms of Mega Watts electrical?”
My hope is that the SK/turbine combination will be found to be competitive with current grid sources of power for communities of a size of, say, 5,000 or more households. If so, then the present grossly inefficient, monolithic, centralized, monopolistic power providers will be forced to compete (just as participants in nearly all other industries are) and radically reduce their waste of resources if they are to remain in business.
The benefits to the economy and to living standards would be appreciable.
Rodney Nicholson.
Dear Andrea,
You say you are looking for helium in the E-Cat SK, did you find any?
Thank you very much,
Frank Acland
Dear Dr Rossi,
I recently survived Hurricane Michael in the Florida Panhandle. We lost many public buildings in the storm. This experience motivated me to research stronger structures. The strongest and most economical structure appears to be the “Monolithic Concrete Dome”. It is earthquake-proof, hurricane-proof, and tornado-proof up to F-5 category. It is cheaper to build than traditional box-type construction. It is so energy efficient that the cost of the foundation, floor, and outer shell will pay for themselves in 15 to 20 years in energy savings.
The round footprint may not be ideal for straight-line assembly line manufacturing. It seems to me that you could overcome the round footprint by using an elongated tubular (hemi-tubular) structure connected to two half-domes.
https://www.monolithic.org/domes
Best regards,
Iggy
Steven N. Karels:
Sorry, I cannot answer these questions.
Warm Regards
A.R.
Prof:
Yes.
Warm Regards
A.R.
Arjen:
It is possible.
We all are dummies, the difference between us is that we are dummies in different matters.
Warm Regards,
A.R.
Dear Andrea Rossi
Just curious based upon your theoretical work, will your explanation how the ecat works open up a total new industry of discovering new technology even outside of lenr? what I try to say, electricity was the driving force behind all the discoveries made afterwards, like telephone, electronic microscope, will your theorie once proven to be correct have a similar effect and open up a whole new era of scientific discoveries to be made just based upon your theory?
sorry if I am just a dummy , I would love to hear your opinion or simplified answer.
all the best.
Arjen
Dr Andrea Rossi,
In your recent theoretical work are you searching also the presence of helium ?
Dear Andrea Rossi,
For the SK variant of the eCat technology — is Hydrogen a required element for the reaction? Would Deuterium, Helium-3, one or both isotopes of Lithium or one of more isotopes of Boron suffice for an exothermic reaction with Nickel?
Dear Readers:
Please go to
http://www.rossilivecat.com
To find comments published today in other posts of this blog.
Warm Regards
A.R.
Yoko:
Yes,
Warm Regards,
A.R.
Frank Acland:
a- yes
b- yes
c- not yet
d- yes
Thank you for your kind wishes,
Warm Regards,
A.R.
Dear Andrea,
You said your main Client has high ‘firepower’.
a) Is this client currently involved in preparing to produce E-Cats?
b) His this client been involved in testing SK reactors?
c) Have you been spending time working at this client’s facilities?
d) In terms of firepower, would this client be one of the top companies in its business sector?
Many thanks and best wishes for the upcoming presentation.
Frank Acland
@ Rod Walton:
The real game changer is the Ecat!
Svein Henrik:
Probably Dr Rossi will increase the productivity proportionally to the amount of orders.
Cheers
CC
Dr Andrea Rossi:
Is the Ecat SK fit to be coupled with a turbine?
Svein Henrik:
Enough to satisfy the demand and fit to get along with the demand increase.
Warm Regards
A.R.
Rod Walton:
Thank you for the information,
Warm Regards,
A.R.
Here is a game changer: just google ‘Power Engineering October 30 2018- Optimizing natural gas generation with energy storage’
Rod Walton
Dear Andrea.
I’m referring to the new automated production-line for E-Cat-SK.
What will be the capacity for the SK-10 per day?
How many such production lines are you planning to acquire over the next years?
Regards Svein Henrik.
@Martin Himpe:
we must remember that Andrea Rossi told us that the COP he got in Doral during the test of the 1 MW plant has been reached thanks also to the fact that he operated the plant personally every day, 16 hours per day, while his team operated the plant during the remaining 8 hours, so that the plant has ben attended to by the men of Leonardo 24/7 for one year, a situation that is unthinkable for the plants he will install in the factories of his customers. I expect the COP will have to be reduced to make the Ecat reliable in normal situations.
Elvis
Raffaele Bongo:
No, the Customer will have certified operators trained by us.
Warm Regards,
A.R.
Thomas Florek:
At that age I will be able to rival the Rock and Trolls! With you, we will invent the “Rock the Trolls” music, characterized by strong accents on the cymbals. I have ready the first title: “Cymbals vs cymballs”
Warm Regards,
A.R.
@Verena Bretenstein:
Which kind of advanced steam engine are you thinking about?
Dan
>> are you going to retire?
> Of course! When I will be 99 years old.
I assume that you will then re-start your musical career!
Hello A. Rossi
When the installation of the plant will be completed at the customer and will be started, will it be necessary to leave on site technicians for maintenance and monitoring in addition to remote control?
Good health and all my support for the project
Best regards
Raffaele
TheFutureIsNow:
Thank you for your kind words and the panaceic suggestion…
Answers:
1- I cannot answer in positive or in negative to this question
2- same as in 1
3- no
Warm Regards,
A.R.
Verena Breitenstein:
Yes.
Warm Regards,
A.R.
Steven N. Karels:
Thank you for your suggestion. Obviously more efficient systems will have priority.
Warm Regards,
A.R.
Martin Himpe:
The COP will be communicated during the presentation of January 31 2019.
I promise it will be enough.
Warm Regards,
A.R.
It was previously claimed that the COP was > 100. Is it still true? Or is it more?
Martin Himpe
Dear Andrea Rossi,
Is there a technical reason why eCat technology could not be used with a heat to electricity generation unit (solid state, no turbines)? If the effective COP is sufficiently high, even the relatively low conversion efficiencies (5 – 8%) could be overcome. And suitable circuitry and energy storage (battery or capacitor) can overcome safety (feedback) concerns. Can an “eCat Battery” be realized. I imaging applications such as drones and remote applications (the moon) would be possible. I would guess that if your effective, long-term COP averaged over 50, it should be doable.
Is the heat exchanger which you are using for the Ecat SK able to produce supercritical steam (P=250 Bar, T=500°C) for an advanced steam engine?
Dear Andrea,
Take care of your health. We need you on this planet for decades to come! I’m unsure of your medical history, but there are a ton of great supplements to try. One that’s a virtual panacea is broccoli extract due to the sulforaphane content.
1) Do you think that atomic hydrogen and lithium atoms in a plasma can interact in such a way that the atomic hydrogen transforms into a form that’s more effective at inducing nuclear reactions with other elements?
2) If such a transformation of H can take place (regardless what it transforms into) do you think that the resulting product can be absorbed by nickel in Ni-H systems such as the E-Cat?
3) Have you ever ran a QX until it became depleted of hydrogen/lithium and stopped working?
Judy:
Of course! When I will be 99 years old.
Warm Regards,
A.R.
Dear Andrea:
Your last answer to Frank Acland of Ecatworld is alarming: are you going to retire?
All the best,
Judy
Sam:
Thank you for the link.
Warm Regards,
A.R.
Frank Acland:
Yes.
Warm Regards,
A.R.
Dear Andrea,
Glad to hear you are healing! Could your main Client now carry on the development of the E-Cat without you if you decided to retire?
Kind regards,
Frank Acland
Hello Dr Rossi
This is a link to report by Director
posted on ECat World Blog.
https://e-catworld.com/2018/10/28/no-mystery-the-e-cat-qx-explained-by-lost-technologies-the-director/
Regards
Sam
Roby:
I agree, but anyway the so called “overall” COP is not very much affected by the difference.
Warm Regards,
A.R.
CC:
I am healing well, and, what is most important, I am working very well. Besides, the firepower of our main Client will make soon my person less important.
Warm Regards,
A.R.