One day I hope we can have a completely open and frank discussion about these technologies without the need for confidentiality. Please don’t wait so long that you pass away like the former head of Lockheed Skunkworks Ben Rich who had hinted of having extremely important information (claiming that they technologies that rivaled anything in Star Trek which could “take ET home” but it would take an act of God for them to ever be revealed to the public) and had been planning to have a long talk recorded with a friend, but ended up passing away before such a disclosure of information took place.
I suspect the information you have could be equally as important to the future of humanity.
BTW, I hope you live for many, many decades to come.
Dear Readers:
This is the link from where to access the presentation of the Ecat SK.
Please find inside the necessary information: http://www.ecatskdemo.com
Warm Regards,
A.R.
Dear Andrea,
will you notify the media of your product?
Information: maybe this can help you to make heat and electricity with the Ecat:
google: “”On nanotech engineering’s 92% efficiency graphene- CNT solar panel claim|Graphene info”
Warm Regards,
Chuck Davis
The following document contains a wealth of information, but please specifically read the paper on page 172 entitled
Comparative studies performed on “fireballs” formed in direct current and high
frequency discharges
M.Sanduloviciu, C.Borciat, V.Melnig and C.Gherman
“Al.l. Cuza” University, Department of Plasma Physics, 6600 Iasi, Romania t
present address: Universit6 Paris-Sud, L.P.G.P., bat. 212, 91405 Orsay cedex, France
The paper explains how plasma balls can be formed on electrodes during DC discharges and can then become free floating when exposed to high frequency electric currents.
I really think that this paper is absolutely and directly applicable to the production of plasma balls in the SK.
Would you please read the article and provide your thoughts on how it applies to what is happening inside the QX/SK?
My guess is that you are producing a plasmoid with the initial high voltage and high current impulse when you cross the “negative resistance” zone of the abnormal glow discharge. Self generating oscillations at high frequency are produced that you re-inforce with additional signals that allow the plasmoid to exist free floating. This prevents the plasmoid from continually sitting on the electrodes and producing massive erosion.
This is slightly offtopic and not about Ecat directly, but highly interesting thing that maybe can be interesting to Mr. Rossi: It looks that somebody managed to replicate material somewhat like Starlite (famous lost invention of late M. Ward) from… cornstarch, baking soda, and glue (sic!). https://www.youtube.com/watch?v=aqR4_UoBIzY (youtube user NightHawkInLight). I’m not sure that such a thing is useful, but certainly intriguing in its simplicity.
Dear Dr Andrea Rossi,
Your presentation is mainly targeting:
1- the scientific community?
2- the rock and troll musicists?
3- the potential clients?
4- the potential investors?
5- a combinations of 1,2,3,4 or any of them?
Godspeed,
Jean Paul Renoir
You have already commented that the presentation will be held on January 31st at 09.00 A.M. Miami Time. Where and when will you announce the link to the presentation?
Your invention has been called impossible, well then, in perspective all your life is a little bit more impossible than that.
Manuel Cilia:
During the presentation all the general data that can be of interest to our Clients will be given. Obviously, specific situations will need specific solutions. Please do participate to the discussion that will follow the video and the description of the Ecat SK.
Warm Regards,
A.R.
Dear Dr. Rossi,
You stated that during the presentation there will be a person following the discussions with the people watching online. May I ask if will it be possible talking also with you?
Sincerely
Italo R.
Dear Dr Rossi
When do you think we will be able to get more technical information about the reactor. As you know I would like to marry the Ecat to a steam turbine to made electricity and use the waste heat to run commerical Aquaponics farms. Information like pressure and temp of the water as it leaves the Ecat and of course the COP would be very help. Does the efficiency of the system drop as it gets larger e.g. the COP of a 20kw unit compared to a Mw unit.
I can sign over my first born child HaHa.
Frank Acland:
As you know, we will talk of this issue diffusely and we will see very interesting things during the presentation.
This will be probably one of the more fascinating things we will see, so let’s wait for the presentation of the Ecat SK. We will see the Ecat SK in a show room and we will see a video that has been already made, as you know, in a factory heated by the Ecat SK, where we have placed a camera in a strategic position to look at the plasma. We placed seven cameras in seven crucial points and, honestly, I think it will be worth the while to watch the 2 hours of the direct streaming.
Thank you for the continue attention and respect that your team, has always dedicated to the work of our team. I recognize that EW is a blog dedicated to the LENR that deals with neutrality and professionality this theme.
Warm Regards,
A.R.
Jim:
The persons in the studio where the presentation will be made are exclusively the ones that will work for the presentation itself and they are:
1- myself
2- one my collaborator
3- the director of the medium we have chosen to organize and broadcast the direct streaming; he will also direct the discussion with the persons that will want to put questions during the direct streaming.
The team that prepared the presentation is wider, because we made a very beautiful video ( or, at least, it is very beautiful to me ) that will be shown during the presentation, where will be seen an Ecat SK in operation in a factory.
Soon will be given information about where to go to watch the direct streaming, how to put questions etc.
Warm Regards,
A.R.
TheFutureIsNow:
1- no
2- n.a.
3- yes
4- I know what they are, but I am not “familiar” with this issue. I did not deal with them
5- I am not familiar with this issue either. Interesting, though.
Warm Regards,
A.R.
Charlotte:
Thank you for your attention to our work. Yes, I think our strategy, for the time being, is the best possible, also considering that probably we will have errors to correct and remaining the owners of the plant shields us, with agreements that foresee the possibility of errors and the fact that our Clients are aware of this fact: since they pay only the energy that is delivered and they have always a back-up makes us safe in the initial period.
Warm Regards,
A.R.
Dear Dr Andrea Rossi:
The fact that you are installing plants to sell heat, not to sell plants is a genial strategy, because:
a. the credibility of your technology will depend only on the production of energy
b. your competitors, so far able to realize nothing that works, will remain privy of models to copy. This is making them frenzy
c. your profits will come exclusively from your production and this is more convincing than any other thing
d. the pass-parole between your clients and potential clients will expand exponentially your business
In one word: genial.
Godspeed,
Charlotte
1) Have you detected any longitudinal ampere forces produced by the QX?
2) If any longitudinal ampere forces have been detected, can they produce a force that could act upon the entire apparatus to produce movement?
3) Do you ever observe balls of plasma in the QX?
4) Are you familiar with the concept of longitudinal electromagnetic waves (vector potential with no magnetic component) and have you attempted to detect any such forces? What were the results?
5) Are you familiar with Eugene Podkletnov’s impulse beam generator? It utilizes an extremely high voltage and high power impulse to create a plasmoid that travels from a superconducting cathode to a super conducting target anode (all in a hydrogen atmosphere). The result is that a powerful beam of force is produced that can penetrate brick walls a kilometer or further away. I would say that the QX may actually produce similar phenomenon.
Alexander Parkhomov and other Russian researchers have noticed that LENR experiments sometimes seem to cause strange-looking “tracks” or “scratches” on the surfaces of various test materials (see https://e-catworld.com/wp-content/uploads/2018/10/Strange-Radiation.pdf , slide 10 and forward). Parkhomov used old DVD disks as test materials, for example, and found that wrapping the DVD inside a metal foil from all sides prevented the occurrence of the strange tracks. To me, this indicates that the agent is some kind of electromagnetic wave; also, from the foil thickness versus skin depth one can derive a lower limit for its frequency. Maybe the emission is modulated, if LENR consists of micro-bursts of some sort, then the effect might even be rapid thermal expansion of the DVD plastic when a strong peak of EM radiation is absorbed by it… this is my speculation. Or maybe a wave peak is intense enough to cause local electric arcing in the vicinity of the plastic of the DVD, which is originally an insulator.
With the E-cat, you have previously measured that it does not emit ionising radiation and no neutrons outside of the reactor. Have you tried to measure if it emits RF or microwaves that might cause similar remote material effects as Parkhomov had found?
CC:
Electron capture happens when radioactive atoms with excess of protons decay, if they have not enough energy to decay by a positron emission. I am not aware of LENR processes that use radioactive materials with excess of protons. To obtain “electron capture” starting from atoms that have not an excess of protons could be possible with energies that are unthinkable of in LENR. It’s basic mathematics. Very basic.
Warm Regards,
A.R.
Chuck Davis:
Yes, during the presentation anybody will be allowed to put questions. They who will not make public their names can use pseudonyms.
Warm Regards,
A.R.
Dear Andrea,
From your answer i imagine the Ecat SK could fit in the space 8 ft long. I will return on this during the discussion in direct streaming on January 31st.
Chuck Davis
Dear Dr Andrea Rossi,
During the presentation of the SK will it be possible to see the energy consume of the control panel, besides the consume of the Ecat?
Thank you if you can answer,
Earl
Francisco:
Yes: during the presentation everybody will be allowed to send an email to an address we will explain and I will answer in direct streaming,
Warm Regards,
A.R.
I suggest for the control system this name: TOPO, because it is a cat-and-mouse system!
I am an expert of advertising and PR and I’d be glad to help in the launch of the Ecat.
Looking forward to streaming your presentation on January 31st,
Matteo Morse, Chicago
Mary:
The presentation will be much more enchanting. After 40 years of ostracism LENR become a player in the industrial reality.
Warm Regards,
A.R.
I watched on http://www.ecatskdemo.com the spot of the presentation of the Ecat SK: enchanting.
Mystery, suspense, a great music!
In the movie “2001 A Space Odyssey”, this music marked the transition between prehistory and the future.
Just like the advent of the Ecat!
Best Regards,
Italo R.
Dear Andrea,
One day I hope we can have a completely open and frank discussion about these technologies without the need for confidentiality. Please don’t wait so long that you pass away like the former head of Lockheed Skunkworks Ben Rich who had hinted of having extremely important information (claiming that they technologies that rivaled anything in Star Trek which could “take ET home” but it would take an act of God for them to ever be revealed to the public) and had been planning to have a long talk recorded with a friend, but ended up passing away before such a disclosure of information took place.
I suspect the information you have could be equally as important to the future of humanity.
BTW, I hope you live for many, many decades to come.
Dear Andrea,
For the Ecat SK 20 kW module, does it contain a single plasma zone or multiple plasma zones?
Regards,
Keith Thomson.
Dear Readers:
This is the link from where to access the presentation of the Ecat SK.
Please find inside the necessary information:
http://www.ecatskdemo.com
Warm Regards,
A.R.
TheFutureIsNow:
Sorry, you are floating in a confidential field of information. I cannot answer in positive or in negative.
Warm Regards,
A.R.
Chuck Davis:
Thank you for the information and the suggestions,
Warm Regards,
A.R.
Dear Andrea,
will you notify the media of your product?
Information: maybe this can help you to make heat and electricity with the Ecat:
google: “”On nanotech engineering’s 92% efficiency graphene- CNT solar panel claim|Graphene info”
Warm Regards,
Chuck Davis
Dear Andrea,
The following document contains a wealth of information, but please specifically read the paper on page 172 entitled
Comparative studies performed on “fireballs” formed in direct current and high
frequency discharges
M.Sanduloviciu, C.Borciat, V.Melnig and C.Gherman
“Al.l. Cuza” University, Department of Plasma Physics, 6600 Iasi, Romania t
present address: Universit6 Paris-Sud, L.P.G.P., bat. 212, 91405 Orsay cedex, France
https://apps.dtic.mil/dtic/tr/fulltext/u2/a357742.pdf
The paper explains how plasma balls can be formed on electrodes during DC discharges and can then become free floating when exposed to high frequency electric currents.
I really think that this paper is absolutely and directly applicable to the production of plasma balls in the SK.
Would you please read the article and provide your thoughts on how it applies to what is happening inside the QX/SK?
My guess is that you are producing a plasmoid with the initial high voltage and high current impulse when you cross the “negative resistance” zone of the abnormal glow discharge. Self generating oscillations at high frequency are produced that you re-inforce with additional signals that allow the plasmoid to exist free floating. This prevents the plasmoid from continually sitting on the electrodes and producing massive erosion.
JPR:
The potential Clients are the target this presentation is aiming to.
Warm Regards,
A.R.
Gian Luca:
We will show what we got during the presentation.
Warm Regards,
A.R.
GB:
The link to the presentation will be published soon.
Warm Regards,
A.R.
Arthur Klepacz:
Thank you for the funny link,
Warm Regards,
A.R.
This is slightly offtopic and not about Ecat directly, but highly interesting thing that maybe can be interesting to Mr. Rossi: It looks that somebody managed to replicate material somewhat like Starlite (famous lost invention of late M. Ward) from… cornstarch, baking soda, and glue (sic!). https://www.youtube.com/watch?v=aqR4_UoBIzY (youtube user NightHawkInLight). I’m not sure that such a thing is useful, but certainly intriguing in its simplicity.
Dear Dr Andrea Rossi,
Your presentation is mainly targeting:
1- the scientific community?
2- the rock and troll musicists?
3- the potential clients?
4- the potential investors?
5- a combinations of 1,2,3,4 or any of them?
Godspeed,
Jean Paul Renoir
Dear Dr. Rossi,
You have already commented that the presentation will be held on January 31st at 09.00 A.M. Miami Time. Where and when will you announce the link to the presentation?
Your invention has been called impossible, well then, in perspective all your life is a little bit more impossible than that.
Kind Regards,
Giordano Bruno
Carissimo A.R.,
In which range you will measure the electromagnetic fields emitted?
With which instruments?
Thanks
Manuel Cilia:
During the presentation all the general data that can be of interest to our Clients will be given. Obviously, specific situations will need specific solutions. Please do participate to the discussion that will follow the video and the description of the Ecat SK.
Warm Regards,
A.R.
Italo R.:
Yes, I will answer the questions.
Warm Regards,
A.R.
Dear Dr. Rossi,
You stated that during the presentation there will be a person following the discussions with the people watching online. May I ask if will it be possible talking also with you?
Sincerely
Italo R.
Dear Dr Rossi
When do you think we will be able to get more technical information about the reactor. As you know I would like to marry the Ecat to a steam turbine to made electricity and use the waste heat to run commerical Aquaponics farms. Information like pressure and temp of the water as it leaves the Ecat and of course the COP would be very help. Does the efficiency of the system drop as it gets larger e.g. the COP of a 20kw unit compared to a Mw unit.
I can sign over my first born child HaHa.
Thank you we are all getting very excited
Frank Acland:
As you know, we will talk of this issue diffusely and we will see very interesting things during the presentation.
This will be probably one of the more fascinating things we will see, so let’s wait for the presentation of the Ecat SK. We will see the Ecat SK in a show room and we will see a video that has been already made, as you know, in a factory heated by the Ecat SK, where we have placed a camera in a strategic position to look at the plasma. We placed seven cameras in seven crucial points and, honestly, I think it will be worth the while to watch the 2 hours of the direct streaming.
Thank you for the continue attention and respect that your team, has always dedicated to the work of our team. I recognize that EW is a blog dedicated to the LENR that deals with neutrality and professionality this theme.
Warm Regards,
A.R.
Dear Andrea,
In you answer to TheFutureIsNow, you stated that you have observed balls of plasma in the QX, can you tell us anything more about them?
Many thanks,
Frank Acland
Jim:
The persons in the studio where the presentation will be made are exclusively the ones that will work for the presentation itself and they are:
1- myself
2- one my collaborator
3- the director of the medium we have chosen to organize and broadcast the direct streaming; he will also direct the discussion with the persons that will want to put questions during the direct streaming.
The team that prepared the presentation is wider, because we made a very beautiful video ( or, at least, it is very beautiful to me ) that will be shown during the presentation, where will be seen an Ecat SK in operation in a factory.
Soon will be given information about where to go to watch the direct streaming, how to put questions etc.
Warm Regards,
A.R.
TheFutureIsNow:
1- no
2- n.a.
3- yes
4- I know what they are, but I am not “familiar” with this issue. I did not deal with them
5- I am not familiar with this issue either. Interesting, though.
Warm Regards,
A.R.
Can you define better who will attend personally the presentation of January 31st and why others cannot attend?
Prof:
Yes.
Warm Regards,
A.R.
Charlotte:
Thank you for your attention to our work. Yes, I think our strategy, for the time being, is the best possible, also considering that probably we will have errors to correct and remaining the owners of the plant shields us, with agreements that foresee the possibility of errors and the fact that our Clients are aware of this fact: since they pay only the energy that is delivered and they have always a back-up makes us safe in the initial period.
Warm Regards,
A.R.
Dear Dr Andrea Rossi:
The fact that you are installing plants to sell heat, not to sell plants is a genial strategy, because:
a. the credibility of your technology will depend only on the production of energy
b. your competitors, so far able to realize nothing that works, will remain privy of models to copy. This is making them frenzy
c. your profits will come exclusively from your production and this is more convincing than any other thing
d. the pass-parole between your clients and potential clients will expand exponentially your business
In one word: genial.
Godspeed,
Charlotte
Hello Andrea,
1) Have you detected any longitudinal ampere forces produced by the QX?
2) If any longitudinal ampere forces have been detected, can they produce a force that could act upon the entire apparatus to produce movement?
3) Do you ever observe balls of plasma in the QX?
4) Are you familiar with the concept of longitudinal electromagnetic waves (vector potential with no magnetic component) and have you attempted to detect any such forces? What were the results?
5) Are you familiar with Eugene Podkletnov’s impulse beam generator? It utilizes an extremely high voltage and high power impulse to create a plasmoid that travels from a superconducting cathode to a super conducting target anode (all in a hydrogen atmosphere). The result is that a powerful beam of force is produced that can penetrate brick walls a kilometer or further away. I would say that the QX may actually produce similar phenomenon.
Are you still measuring the electromagnetic fields emitted from the Ecat SK?
Todd Burkett:
Your guess makes sense.
Warm Regards,
A.R.
What is the cost to manufacture an Ecat SK with a rating of 20 kW complete with everything necessary to operate?
My guess is around 2000 $.
Pekka Janhunen:
As always, Dr Parkhomov is making interesting his work.
Answer: no, I did not, but it is very interesting.
Warm Regards,
A.R.
Dear Andrea,
Firstly, happy New Year.
Alexander Parkhomov and other Russian researchers have noticed that LENR experiments sometimes seem to cause strange-looking “tracks” or “scratches” on the surfaces of various test materials (see https://e-catworld.com/wp-content/uploads/2018/10/Strange-Radiation.pdf , slide 10 and forward). Parkhomov used old DVD disks as test materials, for example, and found that wrapping the DVD inside a metal foil from all sides prevented the occurrence of the strange tracks. To me, this indicates that the agent is some kind of electromagnetic wave; also, from the foil thickness versus skin depth one can derive a lower limit for its frequency. Maybe the emission is modulated, if LENR consists of micro-bursts of some sort, then the effect might even be rapid thermal expansion of the DVD plastic when a strong peak of EM radiation is absorbed by it… this is my speculation. Or maybe a wave peak is intense enough to cause local electric arcing in the vicinity of the plastic of the DVD, which is originally an insulator.
With the E-cat, you have previously measured that it does not emit ionising radiation and no neutrons outside of the reactor. Have you tried to measure if it emits RF or microwaves that might cause similar remote material effects as Parkhomov had found?
regards, /pekka
CC:
Electron capture happens when radioactive atoms with excess of protons decay, if they have not enough energy to decay by a positron emission. I am not aware of LENR processes that use radioactive materials with excess of protons. To obtain “electron capture” starting from atoms that have not an excess of protons could be possible with energies that are unthinkable of in LENR. It’s basic mathematics. Very basic.
Warm Regards,
A.R.
Earl:
Yes and also how thie thermal energy dissipated is recoveredalmost entirely.
Warm Regards,
A.R.
Chuck Davis:
Yes, during the presentation anybody will be allowed to put questions. They who will not make public their names can use pseudonyms.
Warm Regards,
A.R.
Dear Andrea,
From your answer i imagine the Ecat SK could fit in the space 8 ft long. I will return on this during the discussion in direct streaming on January 31st.
Chuck Davis
Dr Andrea Rossi,
Are you still convinced that the electron capture theory to explain the LENR is wrong?
Cheers
CC
Dear Dr Andrea Rossi,
During the presentation of the SK will it be possible to see the energy consume of the control panel, besides the consume of the Ecat?
Thank you if you can answer,
Earl
Chuck Davis:
Difficult to say: I’d need constructive drawings.
Warm Regards,
A.R.
Dear Andrea Rossi:
Do you think the Ecat SK can fit this space?
Google : Siemens SP260D
Chuck Davis
Francisco:
Yes: during the presentation everybody will be allowed to send an email to an address we will explain and I will answer in direct streaming,
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
Will it be possible to put questions during the presentation?
Matteo Morse:
Thank you for your suggestion and your attention to our work.
Warm Regards,
A.R.
I suggest for the control system this name: TOPO, because it is a cat-and-mouse system!
I am an expert of advertising and PR and I’d be glad to help in the launch of the Ecat.
Looking forward to streaming your presentation on January 31st,
Matteo Morse, Chicago
Chung:
No. The presentation of the industrialized Ecat SK will be made on January 31st at 09.00 A.M. Miami Time
Warm Regards,
A.R.
Tamekia:
Only members of our Team and the IT guys that will make the broadcast will be present.
Warm Regards,
A.R.