United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

21,025 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Stephen:
    1- it depends on what we mean by “inside”. The set up of the spectrometer has been made by an engineer who is a specialist of spectometry. He put the eye of the spectrometer adjacent to a window inside the external body of the Ecat, but outside the area of the rector, to allow a precise view on the focus we looked for, but, at the same time, as you correctly say, avoid overheating and saturation.
    2- we changed these measures, to compare the results. We also changed the position, to make other measurements that have not been published because confidential
    3- same as above
    The “ballerina” shown on http://www.ecatskdemo.com is by definition the prima ballerina, properly defined also “etoile”…I hope the first of a firmament.
    Warm Regards,
    A.R.

  • Stephen

    Dear Andrea

    Thanks for sharing with us your Ballerina in the demonstration.

    How amazing it is to think we were glimpsing the dance of new understaings in physics..

    She surely deserves Carlen’s valentine….

    Thanks also for sharing the spectrum like many my minds a buzz about what it means and represents but it was wonderful to me at least to be able to see that thanks.

    May I ask how the spectrometer was setup.

    1. I suppose to prevent over heating of the device and prevent saturation of the sensor from the light source it was out side the device but looking through a small window rather inside the Heat exchanger cavity it self. Is this right or was it actually inside?

    If it was looking through a window like that was it close to that window or also distant from it in the room? If it was liking through a window .

    2. would you be able to say it’s size for example if the window is also 1 cm
    3. Would you be able to indicate the distance of the sensor from the window?

    All the best now for this venture moving forward and for your ballerina joining a ballet company… will she be the prima ballerina?

    Stepho

  • Andrea Rossi

    Eric Ashworth:
    Thank you for your insight,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Celia Lormand:
    1- yes, I am studying it
    2- yes
    Warm Regards,
    A.R.

  • Andrea Rossi

    Clyde:
    Sorry, I cannot add information to what I already published.
    Warm Regards,
    A.R.

  • Andrea Rossi

    GG:
    Yes, we started few days ago. So far works well. The main concern, obviously, are the internet defaults, but this issue is covered by the backup; I am very confident about the fact that the reverse engineering is practically impossible.
    Warm Regards,
    A.R.

  • GG

    Dear Dr Andrea Rossi:
    Are you already using the remote system with the ecat in operation we saw on http://www.ecatskdemo.com ? If yes, how is it working ?
    GG

  • Clyde

    Dr Rossi,
    Reading your paper
    https://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    I understood you maintain the cathode in the vacuu, to enhance all the reactions described in this publication. Am I right?
    Best Regards,
    Clyde

  • Celia Lormand

    Did you study the Clifford algebra? Are you using it in your theoretical work?

  • Eric Ashworth

    Hi Carlen and Andrea, With regards Andreas remarks with regards the ballerina and her having a zitterbewegung I agree entirely. what she is saying is look at me because it is the frequency of the vibration that provides the entity with its identity i.e. a stand alone unit in a field of energy. This vibrational frequency occurs on every event horizon because of a curve because there is no such thing as a straight line. This is something difficult to comprehend unless you think of energy contained within a sphere and the event horizon having a degree of thickness. This phenomena is really to do with pi and its two values one regarding physical geometry and the other regarding none physical energy or you could say the difference between the static and mobile mechanics of energy when comparing each. Pi actually has two values depending upon that which you are applying it. Regards Eric Ashworth

  • Andrea Rossi

    Carlen Young:
    He,he,he…when she knew about your comment, she had a zitterbewegung !
    Warm Regards,
    A.R.

  • Carlen Young

    Happy Valentine’s Day to the beautiful new ballerina!

  • Andrea Rossi

    Matteo Caratto:
    Yes.
    Warm regards,
    A.R.

  • Dear Dr Rossi,
    is the powder mixture always the same as described in the patent? Many thanks

  • Andrea Rossi

    Svein Henrik:
    Sorry, this too is confidential.
    Warm Regards,
    A.R.

  • Svein Henrik

    Dear Andrea.
    As you have stated, you now have found the right gas turbine to be fueled by the Ecat SK.
    What are the inlet temperature you intend to use for this turbine?
    Regards, Svein Henrik

  • Andrea Rossi

    Roberto:
    The paper of Prof Celani I cited in reference has been useful in the specific section where the reference number is reported. All the cited papers have are important.
    Warm Regards,
    A.R.

  • Roberto

    I noticed in the references of your paper here:
    https://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    you cited a paper of Celani: has it been important for the study of your publication?
    Thanks,
    Roberto

  • Andrea Rossi

    Eva:
    I do not think so: I am not an astrophysic, but I suppose that if a planet emits more energy than the sun radiates to it, the reason could be that the planet observed makes heat from nuclear or chemical reactions intrinsic in it. For example our planet, the Earth, emits from volcanoes thermal energy that comes from chemical reactions made in its core.
    Warm Regards,
    A.R.

  • Eva

    Dear Andrea,
    The astrophysic Angelo Adamo in his book “Pianeti tra le note” (Springer 2010) has written that some planets, like Jupiter, emit more thermal energy than they receive from the sun: do you think this could be the result of not man-induced LENR?
    Eva

  • Andrea Rossi

    Aldo:
    Yes. See the photo of the module on http://www.ecatskdemo.com
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rosanne:
    “The Physics Delusion: The urgent need to reinterpret modern physics” by Johan F. Prins DSc. It is a critical analysis of the Copenhagen interpretation of the Quantum Physics. Very interesting to me.
    Warm Regards,
    A.R.

  • Rosanne

    Dear Andrea Rossi:
    Which book are you reading and suggest in these days, not strictly related to your work? Just a curiosity.
    Cheers
    Rosanne

  • Aldo

    Are the plants you are delivering based on assemblies in parallel of the modular Ecat SK we saw during the demonstration of January 31st ?

  • Andrea Rossi

    Bob Belovich:
    1- C
    2- We are at an R&D stage, with our 22 kW modules
    3- No
    4- No
    Warm Regards,
    A.R.

  • Andrea Rossi

    Pekka Janhunen:
    I understand. I think we will be able to give these data when we will deem it opportune.
    I respect your opinion.
    Warm Regards,
    A.R.

  • Dear Andrea,
    Gennady asked if you will give customer-related statistics, to which you answered “maybe”. To me, the most interesting figure would be simply the total installed E-cat power. Just a personal opinion.
    Best regards, /pekka

  • Bob Belovich

    Dear Andrea

    1. Is the focus of your work with gas turbines

    A. For stationary applications

    B. For mobile applications

    C. Both

    2. What is the ecat power range (if any) for your present work with gas turbines.

    3. Is any information developed in the U.S. program to build a nuclear powered airplane of use in your present work with gas turbines.

    4. Are any present customers intending to use ecat heat for pavements (streets, sidewalks)?

    Thanks

  • Andrea Rossi

    Gennady:
    Maybe.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Lotr Mileikowsky:
    The Ecat SK is not affected from its orientation.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Lars:
    No, it was a set up made in our factory.
    Warm Regards,
    A.R.

  • Lars

    Dear Andrea:
    In
    https://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    you describe an experimental setup to corroborate the theoretical issues, particularly related to the points 2-3-4 of your paper. Is this setup the same we see in the video
    http://www.ecatskdemo.com ?
    Cheers
    Lars

  • Lotr Mileikowsky

    Dear Dr. Rossi,

    as for example motorcycles cannot use a standard batteries, they must use “gel” filled batteries necause motorcycles sometimes are riding in low angle,

    there is question: As the same is valid for example for small yachts, boats etc. may be E-Cat SK on full duty at some angled, unstable platform without need of costly stabilisation device?

    Best Regards

  • Gennady

    Dear Andrea,

    Would you keep us apprised of the milestones that you reach with customers? Such as, 10, 50, 100 customers signed contractual agreement. Or 10, 50, 100, 500 customers operating eCat full time. Or any other kind of customer related statistics you could share with us, without naming customers.

    Kind regards,

    Gennady

  • Andrea Rossi

    Steven N. Karen’s:
    Sorry, I cannot give more information after the January 31st presentation.
    Warm Regards
    A.R.

  • Steven N. Karels

    Dear Andrea Rossi,

    The image of the plasma in the eCat-SK appears to be vertically oriented.

    1. Are the electrodes vertical (their axial axis is vertical)?
    2. Will the plasma discharge be positionally stable when the electrodes are oriented horizontally)?
    3. How do you keep the plasma centered between the electrodes?
    4. Is the positive and negative going triangular pulses key?
    5. Will the eCat-SK properly function in a different orientation (e.g., laying on its side)?

  • Andrea Rossi

    WaltC:
    Yes
    Warm Regards
    A.R.

  • Andrea Rossi

    Eric Ashworth:
    Please read “An impossible invention” of Mats Lewan and “Ecat the new fire” of Vessela Nikolova.
    See also
    Ingandrearossi.com
    Warm Regards
    A.R.

  • Eric Ashworth

    Dear Andrea, Congratulations on you and your teams endeavours to get the E-cat technology the recognition that it so rightly deserves. This you do not need to answer but should a large enough company come forward and offer to manufacture and distribute E-Cats to industry and provide you and your team with a research establishment within the company would you accept the offer if the financial conditions met your requirements. I ask this question because you are 1st and foremost a nuclear scientist not an industrialist. by industrialist I mean not driven by financial reward alone but by a passion to understand the dynamics of energy. I wish you and your team all the best. Regards Eric Ashworth

  • WaltC

    Dear Dr. Rossi,

    – Has any manufacturer contacted you to explore the possibility of incorporating your E-Cat SK into their product (presumably an industrial product that utilizes heat) so that they could then sell the combined product to others?

    Analogous to “Intel Inside”, this would be “E-Cat Inside”.

    Thanks,
    WaltC

  • Andrea Rossi

    Italo R.:
    YES !
    Warm Regards,
    A.R.

  • Italo R.

    Dear Dr. Rossi,

    You wrote “YES !”

    There’s something big in the air, apparently.

    Kind Regards,
    Italo R.

  • Andrea Rossi

    JPR:
    YES !
    Warm Regards,
    A.R.

  • Andrea Rossi

    Steven N. Karels:
    If you have a 17″ video, you can measure directly these dimensions with a ruler, because with that diagonal the scale is 1:1
    Just go to
    http://www.ecatskdemo.com
    and go to watch the “Ballerina”.
    Warm Regards,
    A.R.

  • JPR

    Did some global company contact you after the January 31st presentation?
    JPR

  • Steven N. Karels

    Dear Andrea Rossi,

    You have stated the effective area of the eCat-SK was 330 square cm but only used the 1 square cm in your thermal calculations.
    1. Is the 330 square cm the size of the transparent window enclosing the plasma or the area of the plasma itself?
    2. If it is the window dimensions, is the window approximately 10cm in length with a diameter of 10cm?

  • Andrea Rossi

    Vincenzo Bonomo:
    Thank you for your concern, but I am very well, my health is recovering fast and my voice is improving, even id my future career as a tenor is in jeopardize.
    I am working very well and with full power, like an Ecat SK.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Robbie:
    Thank you,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gerard McEk:
    1- yes, I am
    2- please continue to sustain uur work, as you always did
    3- shortly
    4- not yet
    5- not yet
    6- sooner or later, yes
    Warm Regards,
    A.R.

  • Gerard McEk

    Dear Andrea,
    Just some questions about the progress:
    1. Can you tell us if you are happy with the number of orders so far?
    2. Can we help to improve on that? How?
    3. When do you think to deliver the first after-launch E-cat system to a customer?
    4. Are you already producing the maximum numbers of E-Cat SK based on your initial production capacity?
    5. Do you intend do enlarge your production capacity already?
    6. Is there any chance that we may hear of a customer that they are satisfied with the heat delivery of the Leonardo Corp. in this year?
    Thanks and kind regards, Gerard

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>