United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

22,141 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Greg:
    Thank you for your attention to our work. I am too stunned by those numbers.
    Warm Regards,
    A.R.

  • Greg

    Dr Rossi,
    I read
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    It is the most important theoretical paper published in the recentyears. Its over 20 thousand full readingd (for a text not easy to read) speak for it.
    Godspeed,
    Greg

  • Karl-Henrik Malmqvist

    Dear Andrea,
    A couple of years ago you discovered that it was possible to extract electric energy from the EcatQX.
    When you now work to tap electric energy from the EcatSK do you
    a) basically use the same principle.
    b) use the same principle but with much more improved electronics.
    c) use a different approach.

    Best Regards,
    Karl-Henrik

  • Gerard McEk

    Dear Andrea,
    Can you give us a little insight in how you are trying to develop the ‘infinite COP’ Ecat:
    1. Trial and error method to improve the electrical output step by step or
    2. Building a device that must do the job, based on theoretical assumptions.
    And further:
    3. How is heat production going on?
    4. Any chance that a customer will publish some information soon?
    5. Is there more than one E-cat SK plant in operation now?
    Thank you for answering our questions.
    Kind regards, Gerard

  • Andrea Rossi

    Steven N. Karels:
    We are far from that. Premature.
    Warm Regards,
    A.R.

  • Steven N. Karels

    Dear Andrea Rossi,

    The Indianapolis 500 cars require the equivalent of 600kW of power. Theoretically, could an eCat-SK-Electric be sized to provide that much power? While fuel stops would be eliminated, stops for tire changes might be still required. Thoughts?

  • Andrea Rossi

    Steven N. Karels:
    I caught the irony, my friend.
    Warm Regards,
    A.R.

  • Steven N. Karels

    Dear Andrea Rossi,

    You missed my attempt at Biblically related humor where I posted “any scraps from the Master’s table will be quickly devoured”.

    See Mathew Chapter 15: 27-28

    27 “First let the children eat all they want,” he told her, “for it is not right to take the children’s bread and toss it to the dogs.”
    28 “Lord,” she replied, “even the dogs under the table eat the children’s crumbs.”

    Best wishes – Steve

  • Andrea Rossi

    Popeye:
    If the electron eats a lot of spinach, yes. It is like to displace a rocky mountain with a truck deviation that makes it crash against the rock.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com to find comments published in other posts of this blog,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Alexander:
    Thank you for your kind attention to the work of our Team,
    Warm Regards,
    A.R.

  • Alexander

    Dear Dr Rossi,
    I am impressed with , very I am a big fan . Enjoyed http://www.ecatskdemo.com too.
    Waiting for seeing the Ecat that makes directly electricity: that will be history in the making.
    Godspeed,
    Alex

  • Popeye

    Dear Dr Andrea Rossi,
    Do you think that electron capture can be generated by the deformation of the k orbital of the electron?

  • Andrea Rossi

    Enrich:
    Yes, I read of it. Very interesting. Whereas it is not true that nuclear power is the sole existing solution to the G.W., it is true that in the USA the 20% of the electric energy is made by means of nuclear plants; as a consewquence of this fact, to make R&D to make nuclear fuels safer is fundamental.
    Warm Regards,
    A.R.

  • Enrich

    Are you informed that the US has reopened the Idaho Test Reactor ( TREAT ) to improve the testing of nuclear fuels to make them disaster proof, to avoid catastrophic events?
    In this facility, built inside an area of 2300 sq km, about 80 km far from Idaho Falls, they are making experiments to spur the nuclear power industry, because they say it is the sole way to reduce the global warming. What is your opinion?
    E.

  • Andrea Rossi

    Angelo V.:
    Data change depending on the specific situations of Clients.
    Warm regards,
    A.R.

  • Andrea Rossi

    Steven N. Karels:
    Our Team is using sophisticated softwares and simulation systems, but I thank you for your suggestions, as always.
    I can see you are quite skilled in the matter!
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rod Walton:
    Thank you for the information,
    Warm Regards,
    A.R.

  • Rod Walton

    Dear Dr Rossi,
    On Power Engineering May 21 2019:
    US wind energy capacity in 2019 should rise the most in six years as the federal production tax credit phases out…
    Best Regards,
    Rod Walton

  • Steven N. Karels

    Dear Andrea Rossi,

    My previous posts was not an attempt to gather design information, although any scraps from the Master’s table will be quickly devoured. When I did prototype development, I used Expresspcb. https://www.expresspcb.com/. It provided free, easy to use pcb layout software including stand component patterns and they could turnaround a few pcbs in as little as one day. They were also reasonably priced.

    My other comment dealt with microcontrollers or microprocessors. I used the TI MSP430 as it had a wealth of built-in hardware (timers, D/A, A/D, etc.) and was easy to use. They also have inexpensive test boards to help learning their micro.

    When you are doing rapid prototyping and have a design pretty well set but are adjusting parameters, such as event timing or control logic, a micro can facilitate the ease of changes.

  • Dear Andrea,
    on the ecat.com website we find the following estimates, referring to versions of ECat prior to QX / SK
    ECAT Energy Density> 100 000 x oil
    ECAT Power Density> 100 kW / kg
    ECAT Fuel Reserves> 10 billion years
    ECAT Fuel Cost <1/1000 x Oil
    Can you update them?
    I suppose that right now the processing costs are still significantly higher than the costs of the raw material.
    Don't you think that instead of talking about infinite COP would it be better to give a real estimate of energy purchase costs from future customers? Can you already promise a saving of at least 50% or is it premature?

  • Andrea Rossi

    Steven N. Karels:
    Sorry, field mined by confidentiality.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Frank Acland:
    We are still in an R&D phase, therefore I am still making by hand ( solder, board and components at hand ) the control box, correcting on the paper the schematic when errors pop up. It will be manufactured by robots when and if the system will work.
    I am very optimistic about the fact that it could work, but so far it is premature. The fact that making a board by hand is not accurate is not true. It is slower, of course, but, you know, robots are fast, but they do not invent. They make things faster after things have been invented. Fortunately, otherwise I’d be jobless, albeit I have a plan B: could play drums with you at the piano and Thomas Florek at the guitar. “The A.I. Fused”
    Warm Regards,
    A.R.

  • Frank Acland

    Dear Andrea,

    I am glad to hear you are still positive about the Electric E-Cat. I remember at one point you said you were making control boards by hand, which I would expect is not the most accurate way to make them. Are you still doing this, or have you found a better way?

    Many thanks,

    Frank Acland

  • Steven N. Karels

    Dear Andrea Rossi,

    Are you using microcomputers/microcontrollers in your control board? Once the board is designed, built and tested, many minor changes in timing, logic, etc. can be accommodated by reprogramming the micro. Or is the control timing so critical that discrete component implementation is required?

  • Andrea Rossi

    Frank Acland:
    We are working like dogs. The theory id sound, the reactor is OK, now it’s all in the electronics. The boards I made so far have not been so good, but we are progressing and I believe we are getting closer and closer to success. If we succeed, the COP becomes infinite.
    Warm Regards,
    Andrea

  • Frank Acland

    Dear Andrea,

    How is work progressing with direct electricity generation from the E-Cat SK?

    Best wishes,

    Frank Acland

  • Andrea Rossi

    Dear readers:
    Please go to
    http://www.rossilivecat.com
    to find comments published today in other posts of this blog,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Christian:
    Yes.
    Warm Regards

  • Andrea Rossi

    Fulco:
    Yes, Dr Parkhomov is making years since an excellent work.
    Warm Regards,
    A.R.

  • Fulco

    Caro Andrea,
    Did you read the last work of Alexander Parkhomov cited on http://www.E-Catworld.com ? What do you think ?
    Cheers
    Fulco

  • Christian

    Dr Rossi,
    watching http://www.ecatskdemo.com
    I can understand thet the hottest part of the plasma inside the Ecat SK is at the center top, right?
    Best regards,
    Christiam

  • Andrea Rossi

    Norbert:
    Absolutely yes !
    Warm Regards,
    A.R.

  • Andrea Rossi

    Giulio:
    the core of the black body in the plasma reaches 24 000 K, that we measured in collaboration with experts of the matter related to plasma and spectrometry.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Peter and Chuck Davis:
    the E-Cat is just a very useful invention.
    Warm Regards,
    A.R.

  • Peter

    @Chuck Davis:
    I just referred to a range of time: during the last 1000 years the inventions have been infinite.
    Best Regards
    Peter

  • Giulio

    Dr Rossi
    Which is the highest temperature you reach in the highest density point of the plasma inside the Ecat SK?

  • Norbert

    Dear Andrea
    Is it still “An impossible invention” of Mats Lewan a book that is worth its price?
    Cheers
    Norbert

  • Chuck Davis

    @Peter:
    What has been discovered 1000 years ago that could be possibly compared with even the current Ecat design?
    Warm Regards,
    Chuck Davis

  • Andrea Rossi

    Colin:
    Think to Boeing: isn’t it strange that the problem of the instrumentation didn’t show up during the 5 sigma reliability surely they did ?
    It is normal that when you pass from a prototype in the R&D lab to industrial applications many shortcomings show up due to specific situations that in a lab you do not have.
    And it is normal that the problems are resolved. Our Clients know it and signed a disclaimer related to the probability of initial malfunctions. For this reason it is necessary a back up.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Steven N. Karels:
    It depends on the control system that the Client wants. To stop the heat exchange immediately a by-pass of the secondary is necessary.
    Warm Regards,
    A.R.

  • Steven N. Karels

    Dear Andrea Rossi,

    When the eCat (whatever variant) is in a self-sustaining mode (SSM) of operation, and you command an immediate shut-down, what is the average time before thermal power generations ceases?

  • Colin

    Dear Mr Rossi, It is strange the current problems didn’t show up during the very long testing process you carried out to demonstrate 5 sigma reliability.

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com
    to find comments published today on other posts of this blog,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Peter:
    Thank you for your kind attention to the work of our Team,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Giovanni:
    Thank you for your kind attention to our work,
    Warm Regards,
    A.R.

  • Giovanni

    Dr Rossi:
    http://www.researchgatw.net/publication/330601653_E-Car_SK_and_long_range_particle_interactions
    conjugated with
    http://www.ecatskdemo.com
    will pass to the history.
    Thank you and take some rest!
    Giovanni

  • Peter

    Dr Rossi,
    If you really will show an Ecat self sustaining without any external source, this will be the most important invention of the last thousand years.
    Thank you also for the sincerity to tell us you are having problems in this pioneers period of the industrial launch of the heat sales.
    God bless you,
    Peter

  • Andrea Rossi

    Gian:
    a) we are working in that direction
    b) yes
    c) yes
    d) we have the money to work
    God bless you likewise,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Frank Acland:
    The more we go on, the less problems pop up. But I must be extremely rigorous and prudent. As Napoleon said: ” Between the sublime and the ridiculous there is a blink “.
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>