United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

22,141 comments to United States Patent US 9,115,913 B1

  • Buck

    Good Day Andrea:

    I read your exchange with Charlie Meath from this morning. You affirmed that testing “cited yesterday” would be done.

    I have looked back over the last few days worth of exchanges and find no such description. I apologize if I am an error about overlooking your description of the testing to be done.

    Could you bring clarity to what and when you will be testing the ECat SK.

    Thank you for your time.

    Sincerely,

    Buck

  • Andrea Rossi

    Alba Ruddell:
    Not before our Ecats will be well diffused and operating in the market. Our investors will have to be protected by a consolidated business. I will never put at risk the money of our investors. I hate the fraudsters that sell toilet paper disguised by “long shot tremendous opportunities”
    Warm Regards,
    A.R.

  • Andrea Rossi

    Charlie Meath:
    Yes,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Carlene Obery:
    Yes: if we look at the global ball of plasma we see a maxwellian, if we focus on specific spots we see peaks to know the specific wavelength in that area.
    Warm Regards,
    A.R.

  • Carlene Obery

    Dr Rossi,
    about
    http://www.ecatskdemo.com
    is the spectrometry of the plasma different, depending on where the eye of the spectrometer is pointed?

  • Charlie Meath

    Will al the tests you cited yesterday be made in the USA?

  • Alba Ruddell

    Dear Dr Andrea Rossi,
    Will your company go public ?
    Congratulations for the strong progress you made with your important paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_publication
    Thanks if you can answer,
    Alba

  • Andrea Rossi

    Anonymous:
    Thanks for the information,
    Warm Regards,
    A.R.

  • Anonymous

    Michael Moore in his documentary just released says the same things you wrote yesterday about alternative energy: google
    New Michael Moore-backed doc tackles alternative energy

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com
    to find comments published in other posts of this blog,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Jazmine:
    It is a quantum mechanical phenomenon in which an electric charged particle is affected by an electromagnetic potential despite being confined in a region in which the magnetic field and the electric field are equal to zero. The underlying mechanism is the coupling of the electro-magnetic potential with the complex phase of a charged particle’s wave function: the Aharonov-Bohm effect derives from the interference generated by the phase shift of a particle that runs through a solenoid. Important in this context is the “zitterbewegung” effect, that is the vibration at the speed of light of a particle that moves forward at a slower speed, a phenomenon first observed by Dirac.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Spencer Schebring:
    It depends on where the electricity to charge the batteries comes from.
    Warm Regards,
    A.R.

  • Jazmine

    Dr Rossi,
    in your paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    a particular importance seems to be given to the Aharonov-Bohm effect.
    Can you explain in few and simple wordswhat is it?
    Thanks if you can answer,
    Jazmine

  • Spencer Scherbring

    Hi Andrea!
    Do you think that electric cars will contribute to limit the global warming issue?

  • Andrea Rossi

    Athur:
    Thank you for your attention to our work,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Shannon Demarino:
    Yes.
    Warm Regards,
    A.R.

  • Shannon Demarino

    Dr Rossi,
    Are you still using the solder for the electronic circuits of the Ecat SK Leonardo ? Are you still at this level ?

  • Andrea Rossi

    Steven N. Karels:
    1- yes
    2- no
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gianni Celio:
    I did think about this possibility, theoretically interesting due to their 1 eV supposed mass, but it is a very long shot. Anyway, the work of Dr Alexander Parkomov is interesting.
    Warm Regards,
    A.R.

  • Gianni Celio

    Did you ever think that neutrinos could be the source of the excess of energy in a LENR process ?

  • Steven N. Karels

    Dear Andrea Rossi,

    Walt posted: “For example, placing 2 (or more) LENR devices in close proximity to each other, wouldn’t the neutrino flux from one (or the many), alter the operational characteristics of the other?”

    While I personally consider neutrinos an unlikely mechanism to affect LENR processes:

    1. Have you simultaneously tested two or more eCat devices operating in close proximity?
    2. Do they behave differently as compared when they are simultaneously operated at extended distances from each other?

    The cause of any effect may not be determinable but you should be certain that eCat reactor operations are independent from each other, or conversely, there is no “critical distance” when the operate in close proximity. Consider large thermal or electricity plants where there may be thousands of eCat reactors operating in relative close proximity.

  • Andrea Rossi

    WaltC:
    Only experiments could answer, but I have no idea how such an experiment could be done. In few words, I am not able to answer.
    Warm Regards,
    A.R.

  • WaltC

    Dr Rossi,
    I’m not asking for you to express an opinion on whether low energy neutrinos could be at the root of LENR, but hypothetically, if they were:

    1) couldn’t that be a testable theory?

    2) For example, placing 2 (or more) LENR devices in close proximity to each other, wouldn’t the neutrino flux from one (or the many), alter the operational characteristics of the other?

    Neutrinos are impacted by distance (r-squared), but they aren’t impacted by lead or Faraday cages, etc. If the neutrino theory were valid, then it might be possible to turn an operating LENR device into something like a low energy neutrino detector.

    Crazy thought– fun to think about since there’s currently no known way to detect LE neutrinos, but difficult, I have to think, to implement.

    WaltC

  • Andrea Rossi

    Keith T.:
    Thank you for your insight.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Giorgio Cerrina:
    I prefer to suffocate my optimism and respect what always suggests to me one of the most important members of our Team: “Andrea, better be humble”. OK, I will be humble: 6.
    Warm Regards,
    A.R.

  • Dear Dott. Rossi according to your studies, at what point you are in explaining the lenr reaction on a scale of one to ten.
    Thank you for your reply and my best wishes to you and your staff.

  • KeithT

    Dear Andrea,

    Regarding recovery of electricity from your E-Cat SK’s, you have indicated that you have identified a possible solution for extracting usable electricity, that you are heavily committing your time and resources to experiments towards this solution, if this solution you are evolving does not eventually reach the efficiency level you require, will you still pursue alternative options for direct / indirect recovery of electricity.

    A possible alternative would follow from the sequence of events.

    From previous indications, to drive activity in the E-Cat’s charge you inject an electrical trigger signal, this induces electron coherence in your active material, a coherent state then leads to particular nuclear activity, from this a pathway leads on to the eventual production of extreme ultraviolet emissions, heat and electricity within the E-Cat SK charge.

    In this overall sequence there is likely a small-time delay between input and output electrical events. Would it be possible to use rapid switching (mechanical or electrical), i.e. connect the charge for a period to initiate, then disconnect from the control electronics and connect to electronics / capacitors / batteries for a period to recover the produced electricity, then switch back to input again and repeat. Partially diverting the charge output electricity away from the control panel will also have the benefit of reduced cooling requirements.

    Likely that reality is not as simple as this, even if it was theoretically possible, I have no doubt it may be impracticable, incredibly difficult or not efficient enough for meaningful use, and that you may have already investigated this, but if not, just possibly worth a thought.

    Regards,

    Keith Thomson.

  • Andrea Rossi

    Jorge:
    The way we are trying to get electricity directly from the plasma is one of the most complicated and sophisticated system I have ever dealt with.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rod Walton:
    Thank you for the information,
    Warm Regards,
    A.R.

  • Rod Walton

    On Power Engineering August 6 2019:
    Ethos energy takes control of ExxonMobil cogeneration plant in Baton Rouge, Louisiana, to supply power and steam to the adjacent ExxonMobil refining and chemical complex
    Rod Walton

  • Jorge

    Dear Dr Andrea Rossi,
    Are you getting the electricity from the plasma inserting a copper wire in the reactor to carry out the electrons flow?

  • Andrea Rossi

    KeithT:
    The problems you cite were exposed during the test of Stockholm on November 24 2017: google “Ecat QX presentation Stockholm November 24 2017”
    In the presentation of the Ecat SK here
    http://www.ecatskdemo.com
    the problem has been resolved and all the energy was thermalized.
    Since then we started a cycle of R&D aimed to produce not only heat, but also electricity directly from the plasma.
    We are working very well on it and it is not impossible that before the end of this year we will have consistent results: we are looking for obtaining a permanent ssm.
    Warm Regards,
    A.R.

  • KeithT

    Dear Andrea,

    You have indicated previously that in addition to the bulk of the energy output being extreme ultraviolet emissions, there is also heat traveling back through the connecting cabling to the control box, and that up until recently the E-Cat produces electricity but that it was not in a usable form and it was efficient / convenient to thermalize it in the control box.

    For the January 2019 test, how much heat was removed from the control box by the control box heat exchanger.

    Regards,

    Keith Thomson.

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com
    to find comments published today in other posts of this blog,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Szymon Blachuta:
    Thank you for the information,
    Warm Regards,
    A.R.

  • Szymon Blachuta

    Mr Rossi,
    This could interest you:
    http://www.pnas.org/content/116/31/15356
    Best Regards,
    Szymon Blachuta

  • Andrea Rossi

    Toussaint Francois:
    No.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Raphael:
    Correct.
    Warm Regards,
    A.R.

  • Raphael

    Dr Rossi,
    About the “electron capture”: you are right. It’s pure B.S.
    The electron capture surely has been observed, but, as you correctly said, only in case of radioactive isotopes with a number of protons that exceeds the capacity of neutrons to shield the Coulombian forces.
    Cheers
    Raphael

  • toussaint françois

    Dear Andrea Rossi,

    One question please, in the past did you have transmutations eating up your reactors?

    Kind regards

    Toussaint françois

  • Andrea Rossi

    Eernie1:
    Because either you are talking of radioactive isotopes with excess of protons ( which is not the case of LENR ), or you need 750 keV ( = 9375 billions of Celsius degrees ).
    Warm Regards,
    A.R.

  • Eernie1

    Dear Andrea,
    Why you consider impossible electron capture in LENR ?
    Eernie1

  • Eric Ashworth

    Sam, I find the link to Dr Parkhomov LENR theory extremely interesting and which I feel highlights the importance of the JONP with regards its ability to broadcast very important scientific information. Regards Eric Ashworth

  • JPR

    @Prof:
    I agree with you, the important success of Rossi’s publication on researchgate
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    comes from the synergy between the theoretical progress and the corroborating video http://www.ecatskdemo.com and the expectation of the permanent self sustaining mode of the incoming Ecat SK Leonardo, that would be a veritable revolution.
    Jean Paul Renoir

  • Poker88

    @Prof,
    I agree with Prof: the dramatic success of
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    is probably due to the coherence between theory and experiment and to the trustful expecteation of the Ecat SK Leonardo with permanent self sustaining mode,that would be a revolution.

  • Prof

    Dr Rossi,
    Here is an update of the statistics of Andrea Rossi publication on Researchgate: these numbers are not just stunning, they are unbelievable. No one has ever reached these numbers in 6 months, few Professors of the highest level have reached these numbers in their entire professional life:
    Full Readings after 6 months: more than 30 000 (thirty thousands !!!) and counting. The average is 50 after years.
    Research Interest Index: 851.0 and counting. The average is 10 after years.
    Recommendations: 2599 and counting. The average is 10 after years and, by the way, this is some peer reviewing!
    Every comment is useless. The world is waiting trustfully for your Ecat SK able to power itself with part of the energy it makes, this is the sole thing that can explain these numbers.
    Ad majora,
    Prof

  • Andrea Rossi

    Sam:
    Thank you for the link,
    Warm Regards,
    A.R.

  • Sam

    Hello DR Rossi

    This is a link to DR Parkhomov
    LENR Theory read by Bob Greenyer.

    https://youtu.be/V5J3rJ1R1ho

    Regards
    Sam

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com
    to find other comments published today on other posts of this blog,
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>