I asked Andrea if I could ask him “2” questions.
He paused for a second then said, Yes!
What’s your second question?
Holy Crap. Now I don’t know which question to ask. He he
Oh well, moving on I have a couple suggestions.
If the SKL is used for auto’s and required 10 cubes, the 1st cube would be used most, 2nd less etc and the 10th used the least. One could change each cube as needed, inconvenient or change all at the same time wasting much of the total charge.
The SSD(Solid State Drive) in computers have a limited number of writes to each memory location. Tho substantial, there was concern of some locations being used much more then others and this would lead to reliability issues when most of the drive was like new and having to be prematurely replaced.
To alleviate this issue, SSD’s use an algorithm that keeps track of how many writes have been directed to each location. Thus all locations are written to a similar number of times improving longevity and reliability. I was thinking something similar could be implemented with the chained SKL’s.
2nd suggestion.
During the presentation, for 1 of the electrical loads, you could use an ekectric Tea or Coffee pot according to your preference,
During the 1st half of the presentation you could casually pour yourself a hot bleverage. You need not say a word. During the latter half of the presentation, you could pour yourself a second cup. Again, you would not need to say a word. he he
Just a T I mean lowercase t-hought.
Thank you Dr. Rossi for the commitment and effort through which you have managed to develop and carry on your fabulous idea, now reality. I wish you the satisfaction and success that you and all your collaborators deserve. This world, a bit ramshackle, goes on like this: in small but enormous steps due to people like you. I wish you and your team a good job.
Luciano
After the release on the market you Will have some competitors, many of them maybe Will improve your invention. The risk Is that somebody else will surpass you. You must be the first recognized inventor of these new technology. Remind It. And also you must be careful until the release, because your invention could be counteract from the lobbies of fossils energies. What Will happen if you suddendly die ? Anybody else could make your work instead of you or the “secret ingredient” Is already….secret for all ? Please think about your safety and for the safety of our Planet. Warmest regards mr Rossi
Dear Dr. Andrea Rossi and all his great Team, just one question:
In order to get the most reliability of the system, my simple idea is to have two E-Cat SK, one on and the other in off/standby operative state. If I have to change the “fuel” I can do it in the off/standby unit safely. In it way I get the double of time in swich on operative state, in terms of time of the whole system, with automatic change of off/standby and on/operative betwin the two E-Cat SK, drived by AI control system.
The same idea is for motorcycles, cars, TIR, boats, airplanes, ships etc.
Thank you for your kind read and answer.
All my sincere and best admireness for your dreamy works.
Just a few weeks ago Andrea Rossi wrote that he had dumped a lot of money and materials to structurally change the concept.
Nevertheless, the sale of heat apparently remains a separate branch based on the E-Cat SK
A little later we get the joyful news that there is a new E-Cat SKL that converts 75% of the energy produced into electricity. Electricity has a much higher market value than heat in a high-tech society.
The electricity is not generated via magnetic fields such as MHD.
I think that not much remains after elimination. I intentionally don’t write what I think. I await the questions and answers from other followers of this blog.
But as with many good things, new solutions and techniques often come with a price or at least a compromise.
If what I suspect is more or less correct, then I think that the SKL produces at least one order of magnitude less power than the SK if they would receive the same power supply, whereby the power supply of the SK is supplied externally and the power supply of the SKL naturally from its own production .
In that case, the heat problem is much less likely. A heat source of 200 to 500 watts can easily be used in the meanwhile well-known cube without forced cooling.
Five to ten cubes would then suffice to drive almost infinitely far with an electric car, even in winter conditions. We need more to drive a container ship, but weight and space play a lesser role there.
If what I suppose above turns out to be wrong, then we will just laugh with it and continue searching for other information and claims.
You have invented the electric generator to unparalleled performance to date 70 to 80%.
However, in practice a generator must be able to adapt permanently and instantly to the demand for electrical power.
Can you specify if the E-Cat Leonardo is or will eventually be able to modulate its power and adapt to the needs of the user.
Looking forward to your future demonstration, I wish you, your family, your team and your supporters good holiday season.
Having spent time outdoors shoveling snow here in New England, it would have been nice to have an eCat-powered body warmer. Please put on your list of desired products. Brrrrr! You probably do not consider such a necessity in warm Miami. LOL.
You said that you hoped that certification for household SKLs will be certified by April 2020. This means that it will need to be submitted to likes of CE, UL, CSA, etc.
1. Can you say when the SKL was or will be submitted for their evaluation?
2. In the past you have said that certification for household use of your old E-Cats would take a long, long time. Why are you more optimistic for speedy certification of the SKL?
Dear Andrea,
how many chip devices are required for a single control system of the SKL. One, a few, many?. A single control system can be able to manage more SKL?
Regards, Giuseppe
Given a 1 kW total output and 30% of the generated energy going to thermal heat, a 10cm on a side cube, then the free air convective cooling is estimated to require a surface temperature in the 250C to 300C range in a 20C environment.
1. For your demonstration next year, do you plan on using a heat exchanger or forced air flow to keep the “cube” cool?
2. Is the control unit (the size of a pack of cigarettes) a separate unit from the “cube”?
3. If Yes to #2, will the control unit be in a different environment than the “cube”?
1. Do you have a robotized line ready for Mass production?
2. Based on your experience do you think the certification for the household E-Cat SKL will be granted before April 2020.
3. If nr. 2 is true, will you be able to start delivering household cats before November 2020?
Last night I dreamt of a cat that fell on my hands from up. It was a beautiful little kitty.
can’t wait to date ballerina.
Kind regards to the nr. 1 inventor of the century and his team
Dear Andrea,
You said that the reactor box is a cube about 10 cm each side with a control box the size of a cigarette package.
But for the demonstration unit you must also have a converter box that converts whatever voltage/frequency (confidential) that emits from the reactor to 230 V 50 Hz for Europe, right?
Or will your demonstration unit be a bigger box with all the above inside?
Or will a DC-converter be included in the reactor box that gives a certain stable DC voltage output, thus making it possible to connect the units in parallel and/or series like batteries?
If the converter is included in the reactor box, it will be possible to adjust the DC voltage.
If 12 or 24 V DC is convenient for the reactor many standard components can be used. There is a limit in Europe for 48 Volts. Below 48 V there are fewer regulations.
I believe some important people know what you have in the Ecat SKL
Here is a Wall Street Journal piece on Aramco’s current IPO. Can’t beat the timing ! ! !
Link>> https://youtu.be/vLeTtNxrhbo
Also, I believe your choice of Sweden is excellent.
I’m certain Greta Thunberg will be very happy to learn of the Ecat SKL
Congratulations for your tireless efforts. You have always believed that it was possible and now it has become reality.
Is it correct if I think that people expect too much from a 10 cm cube? The highest achievable power for a 10 cm painted metal cube is about 300 W? 30% heat = 90 W (15 W dissipation / side). More realistic would be 100 W total output energy > 70 W electricity and 30 W heat.
I wish you all the best and good health.
Hello Mr. Rossi, why don’t you invite some environmental activist at your presentation ? Greta Thunberg and her staff. Your device Will have a world Wide attention. Best regards
At the upcoming presentation, do you plan to show the E-Cat SKL working to the live audience like you did in Stockholm in 2017, or will you show a recording of an earlier test like you did earlier this year?
Dear Andrea, I understand entirely. Your struggle has been monumental and Sergio Focardi would be proud of you as you are of him. Is the battle over?. I remain a keen reader of your JONP. No need to answer Regards Eric Ashworth
Carissimo A.R.
After this new and exciting discovery and if things will go as expected, does it find in itself a certain sense of revenge against those who, up until yesterday, made them tripping and insults?
In these moments did you have the opportunity to think again about all those who in the recent past have fought against “official science” to carry on the DREAM? I think of: Focardi, Stremmenos, Preparata, Del Giudice, Flieschmann, Pons and all the others.
Dear Andrea,
congratulations for the latest achievements.
Will the E-Cat SK Leorando be your first product to be widely marketed?
Are you still planning to sell energy in the form of heat produced through the E-Cat SK?
Will the potential market of the SKL E-Cat be represented more by the industrial production of energy (possibly combined electric heat) or do you see it more as a portable device (at the moment I still imagine limited to the industrial / military sector)?
Are you working on a new patent with differences respect US 9,115,913 B1?
Chuck Davis:
No
Warm Regards
A.R.
There are airoplanes poweeed by electric engines: can the Ecat fit?
Chuck Davis
Steven N. Karels
1 we will see
2 yes
Warm Regards
A.R.
Giuseppe:
Yes
Warm Regards
A.R.
Frank Acland:
1 on course
2 much easier to control
Warm Regards
A.R.
Steven N. Karels:
I know the feeling: I lived for 4 years n New Hampshire…
Warm Regards
A.R.
Plasma Fan:
The day will be given at the presentation
Warm Regards
A.R.
Raffaele Bongo:
Yes it is
Warm Regards
A.R.
Salvatore Boi
Good ideas
Warm Regards
A.R.
Paul Di Anno:
Thanks for your insight
Warm Regards
A.R.
Luciano:
Thank you for your kind sustain
Warm Regards
A.R.
Dan C:
Thank you for your suggestions
Warm Regards
A.R.
Dear Andrea,
A heartfelt congratulations.
And hey to all.
I asked Andrea if I could ask him “2” questions.
He paused for a second then said, Yes!
What’s your second question?
Holy Crap. Now I don’t know which question to ask. He he
Oh well, moving on I have a couple suggestions.
If the SKL is used for auto’s and required 10 cubes, the 1st cube would be used most, 2nd less etc and the 10th used the least. One could change each cube as needed, inconvenient or change all at the same time wasting much of the total charge.
The SSD(Solid State Drive) in computers have a limited number of writes to each memory location. Tho substantial, there was concern of some locations being used much more then others and this would lead to reliability issues when most of the drive was like new and having to be prematurely replaced.
To alleviate this issue, SSD’s use an algorithm that keeps track of how many writes have been directed to each location. Thus all locations are written to a similar number of times improving longevity and reliability. I was thinking something similar could be implemented with the chained SKL’s.
2nd suggestion.
During the presentation, for 1 of the electrical loads, you could use an ekectric Tea or Coffee pot according to your preference,
During the 1st half of the presentation you could casually pour yourself a hot bleverage. You need not say a word. During the latter half of the presentation, you could pour yourself a second cup. Again, you would not need to say a word. he he
Just a T I mean lowercase t-hought.
Warm regards
Dan C.
Thank you Dr. Rossi for the commitment and effort through which you have managed to develop and carry on your fabulous idea, now reality. I wish you the satisfaction and success that you and all your collaborators deserve. This world, a bit ramshackle, goes on like this: in small but enormous steps due to people like you. I wish you and your team a good job.
Luciano
After the release on the market you Will have some competitors, many of them maybe Will improve your invention. The risk Is that somebody else will surpass you. You must be the first recognized inventor of these new technology. Remind It. And also you must be careful until the release, because your invention could be counteract from the lobbies of fossils energies. What Will happen if you suddendly die ? Anybody else could make your work instead of you or the “secret ingredient” Is already….secret for all ? Please think about your safety and for the safety of our Planet. Warmest regards mr Rossi
Dear Dr. Andrea Rossi and all his great Team, just one question:
In order to get the most reliability of the system, my simple idea is to have two E-Cat SK, one on and the other in off/standby operative state. If I have to change the “fuel” I can do it in the off/standby unit safely. In it way I get the double of time in swich on operative state, in terms of time of the whole system, with automatic change of off/standby and on/operative betwin the two E-Cat SK, drived by AI control system.
The same idea is for motorcycles, cars, TIR, boats, airplanes, ships etc.
Thank you for your kind read and answer.
All my sincere and best admireness for your dreamy works.
Hello DR Rossi
Physics mystery solved.
https://websfavourites.com/science-and-technology/2019/12/03/student-solves-physics-mystery-that-has-puzzled-scientists-for-100-years
Regards
Sam
@ Steven N Karels
Just a few weeks ago Andrea Rossi wrote that he had dumped a lot of money and materials to structurally change the concept.
Nevertheless, the sale of heat apparently remains a separate branch based on the E-Cat SK
A little later we get the joyful news that there is a new E-Cat SKL that converts 75% of the energy produced into electricity. Electricity has a much higher market value than heat in a high-tech society.
The electricity is not generated via magnetic fields such as MHD.
I think that not much remains after elimination. I intentionally don’t write what I think. I await the questions and answers from other followers of this blog.
But as with many good things, new solutions and techniques often come with a price or at least a compromise.
If what I suspect is more or less correct, then I think that the SKL produces at least one order of magnitude less power than the SK if they would receive the same power supply, whereby the power supply of the SK is supplied externally and the power supply of the SKL naturally from its own production .
In that case, the heat problem is much less likely. A heat source of 200 to 500 watts can easily be used in the meanwhile well-known cube without forced cooling.
Five to ten cubes would then suffice to drive almost infinitely far with an electric car, even in winter conditions. We need more to drive a container ship, but weight and space play a lesser role there.
If what I suppose above turns out to be wrong, then we will just laugh with it and continue searching for other information and claims.
Regards,
Koen
Hello A. Rossi
You have invented the electric generator to unparalleled performance to date 70 to 80%.
However, in practice a generator must be able to adapt permanently and instantly to the demand for electrical power.
Can you specify if the E-Cat Leonardo is or will eventually be able to modulate its power and adapt to the needs of the user.
Looking forward to your future demonstration, I wish you, your family, your team and your supporters good holiday season.
Best regards
Raffaele
Dear Andrea,
What is the weight of one of your cubes along with the control box and everything required for it to self sustain?
Sincerely,
Plasma Fan
Dear Andrea Rossi,
Having spent time outdoors shoveling snow here in New England, it would have been nice to have an eCat-powered body warmer. Please put on your list of desired products. Brrrrr! You probably do not consider such a necessity in warm Miami. LOL.
Dear Andrea,
You said that you hoped that certification for household SKLs will be certified by April 2020. This means that it will need to be submitted to likes of CE, UL, CSA, etc.
1. Can you say when the SKL was or will be submitted for their evaluation?
2. In the past you have said that certification for household use of your old E-Cats would take a long, long time. Why are you more optimistic for speedy certification of the SKL?
Many thanks,
Frank Acland
Dear Andrea,
how many chip devices are required for a single control system of the SKL. One, a few, many?. A single control system can be able to manage more SKL?
Regards, Giuseppe
Dear Andrea Rossi,
Given a 1 kW total output and 30% of the generated energy going to thermal heat, a 10cm on a side cube, then the free air convective cooling is estimated to require a surface temperature in the 250C to 300C range in a 20C environment.
1. For your demonstration next year, do you plan on using a heat exchanger or forced air flow to keep the “cube” cool?
2. Is the control unit (the size of a pack of cigarettes) a separate unit from the “cube”?
3. If Yes to #2, will the control unit be in a different environment than the “cube”?
Alfonso Troisi Lopez:
1 not yet
2 I hope so
3 it is not impossible
Thank you for your kind sustain
Warm Regards
A.R.
Peter Forsberg:
We consider it deep learning
Warm Regards
A.R.
Dear Andrea Rossi,
What type of AI are we talking about for the control system? Deep Learning or some other type of machine learning?
Regards
Peter
Hello Dr. Rossi,
A few questions if I may.
1. Do you have a robotized line ready for Mass production?
2. Based on your experience do you think the certification for the household E-Cat SKL will be granted before April 2020.
3. If nr. 2 is true, will you be able to start delivering household cats before November 2020?
Last night I dreamt of a cat that fell on my hands from up. It was a beautiful little kitty.
can’t wait to date ballerina.
Kind regards to the nr. 1 inventor of the century and his team
Karl-Henrik-Malmqvist:
This will depend on the load we will choose. We can regulate the voltage as we want.
Warm Regards,
A.R.
Anonymous:
Yes
Warm Regards,
A.R.
Dr Rossi,
has the artificial intelligence device been designed by your Team?
Dear Andrea,
You said that the reactor box is a cube about 10 cm each side with a control box the size of a cigarette package.
But for the demonstration unit you must also have a converter box that converts whatever voltage/frequency (confidential) that emits from the reactor to 230 V 50 Hz for Europe, right?
Or will your demonstration unit be a bigger box with all the above inside?
Or will a DC-converter be included in the reactor box that gives a certain stable DC voltage output, thus making it possible to connect the units in parallel and/or series like batteries?
If the converter is included in the reactor box, it will be possible to adjust the DC voltage.
If 12 or 24 V DC is convenient for the reactor many standard components can be used. There is a limit in Europe for 48 Volts. Below 48 V there are fewer regulations.
Best Regards,
Karl-Henrik
Eric Ashworth:
You are right
Warm Regards
A.R.
Frank Acland:
Test working live
Warm Regards
A.R.
Paul Di Anno:
Thank you for your suggestions
Warm Regards
A.R.
Pol Dekyvere:
The data will be given after the tests
Warm Regards
A.R.
Buck:
Thank you!
Warm Regards
A.R.
Dear Andrea,
I believe some important people know what you have in the Ecat SKL
Here is a Wall Street Journal piece on Aramco’s current IPO. Can’t beat the timing ! ! !
Link>> https://youtu.be/vLeTtNxrhbo
Also, I believe your choice of Sweden is excellent.
I’m certain Greta Thunberg will be very happy to learn of the Ecat SKL
My best to you, your team, and your wife.
Buck/Mason
Congratulations for your tireless efforts. You have always believed that it was possible and now it has become reality.
Is it correct if I think that people expect too much from a 10 cm cube? The highest achievable power for a 10 cm painted metal cube is about 300 W? 30% heat = 90 W (15 W dissipation / side). More realistic would be 100 W total output energy > 70 W electricity and 30 W heat.
I wish you all the best and good health.
Hello Mr. Rossi, why don’t you invite some environmental activist at your presentation ? Greta Thunberg and her staff. Your device Will have a world Wide attention. Best regards
Dear Andrea,
At the upcoming presentation, do you plan to show the E-Cat SKL working to the live audience like you did in Stockholm in 2017, or will you show a recording of an earlier test like you did earlier this year?
Many thanks,
Frank Acland
Dear Andrea, I understand entirely. Your struggle has been monumental and Sergio Focardi would be proud of you as you are of him. Is the battle over?. I remain a keen reader of your JONP. No need to answer Regards Eric Ashworth
Gian Luca:
Revenge is not in my cords.
I work to make things, not to be negative.
Of course I think to all my predecessors.
Warm Regards,
A.R.
Gian Luca:
Sweden
Warm Regards,
A.R.
Carissimo A.R.
After this new and exciting discovery and if things will go as expected, does it find in itself a certain sense of revenge against those who, up until yesterday, made them tripping and insults?
In these moments did you have the opportunity to think again about all those who in the recent past have fought against “official science” to carry on the DREAM? I think of: Focardi, Stremmenos, Preparata, Del Giudice, Flieschmann, Pons and all the others.
Carissimo Andrea
maybe someone has already asked this question but where will the next event take place? Europe vs USA?
Angelo V.:
1 probably
2 yes
3 to be defined
4 yes
Warm Regards,
A.R.
Dear Andrea,
congratulations for the latest achievements.
Will the E-Cat SK Leorando be your first product to be widely marketed?
Are you still planning to sell energy in the form of heat produced through the E-Cat SK?
Will the potential market of the SKL E-Cat be represented more by the industrial production of energy (possibly combined electric heat) or do you see it more as a portable device (at the moment I still imagine limited to the industrial / military sector)?
Are you working on a new patent with differences respect US 9,115,913 B1?
On Power Engineering issue of December 3 2019:
Wall of sound:managing acoustics around reciprocating engines
Rod Walton
Koen Vandewalle:
1 no
2 depends on the distance, mut much of our energy is not in the visible spectral window
Warm Regards,
A.R.