Caro Andrea,
visto il contenuto di alcuni posts appena pubblicati credo che sia necessario fornire una spiegazione conclusiva sulla mia storiella “Come gli Elettroni prevedono il futuro”
Very Long Range Electons Interactions (VLREI)
di
Enea Romagnoli
Alcuni posts appena pubblicati mi hanno permesso di capire l’origine del fenomeno che avevo visto.
Basandomi su quanto riportato dalla tua teoria LRPI penso di poter pubblicare anche la mia teoria VLREI.
Tutti gli Elettroni sono interconnessi in un continuum spaziale e temporale, quindi nel momento in cui io stavo per schiacciare il pulsante per attivare la scarica elettrica sulla bobina del magnetizzatore, gli Elettroni del mio cervello si premuravano di avvertire gli Elettroni della bobina che una ingente quantità di Elettroni era in arrivo, quindi di predisporsi a fluire nella giusta direzione.
Fine della storiella!
Dear Andrea,
given the content of some posts just published, I believe it is necessary to provide a conclusive explanation of my story “How electrons predict the future”
Very Long Range Electons Interactions (VLREI)
by
Enea Romagnoli
Some posts just published allowed me to understand the origin of the phenomenon I had seen.
Based on what your LRPI theory reports, I think I can also publish my VLREI theory.
All the Electrons are interconnected in a spatial and temporal continuum, so when I was about to press the button to activate the electric discharge on the magnetizer coil, the Electrons of my brain were careful to warn the Electrons of the coil that a huge amount of Electrons was on the way, so to be prepared to flow in the right direction.
End of the story!
It remains a challenge to understand where the E-Cat’s energy comes from.
As I am trying to understand it now, the interactions between the particles form a kind of “energy pump”, similar to a heat pump, but where space-time is the medium. Then the space-time – for our perceptions – is stretched, so that it can receive entropy from the environment, after which this space-time returns to our world, with a part of added energy, and which is structured within the structures of the energy-bearing waves. .
Is this nonsense or can I think a little further in that direction?
Just a question regarding use of heatpumps with a Ecat-SKL.
COP of the Heatpump is what is at any given moment, function of outside temp if it is an Air to Air for example.
If the goal of the system is heat one can use, in the case of my house, a 15 Kw Ecat-SKL and hook it up to my old waterbased electrically operated hotwater based radiator system.
I then need a 15 kW Ecat SKL.
Or I can use an heatpump (the one I have) with COP (all year average ~ 3) and only need a 5 kW Ekat SKL(say 10 kW with 5 kW to spare). The COP of the heatpump is the same as before but I can either use a smaller Ecat and get the same heat as with a 15kW unit to a COP 1 hotwater heater – or smaller 5 kW unit and still get my 15 kW of heat (the sun gives me the other 10 kW).
So the use of a heatpunmp meas I can use a smaller Ecat if heat is what I need the Ecat for. If the Ecat is unexpensive and small then this argument falls flat on its face, one simply adds as much Ecat SKL power as one needs.
1. Is the team that is working with you on the various aspects of the E-Cat growing since your first successful run of the E-Cat SKL in November?
2. How many persons are now in the team, roughly?
3. Will we hear from some of your team members at the upcoming presentation?
Enea Romagnoli, I presume you discovered an interesting fact regards the enigmatic electron. From what I am aware there is no space between objects as nature is interconnected by the electron field. What I suspect is the electrons of the wire sensed your presence and reacted. Your sensitive equipment registered this reaction of your field with that of the electrons. Tesla was way in front of his time with regards understanding the electron. Regards Eric Ashworth
Dear Mr Rossi , do you have a partnership with an important manufacturer for the electronic parts or some other unveiled parts ? If yes, Will you reveal It on the presentation ? Best regards
Dear Andrea,
Just a few questions regarding the upcoming test in January:
1. Will the tested ECat be the same as the one reached full SSM on the 24th of November?
2. If not, will it be more or less powerful?
3. What will be the estimated duration of the test?
I know you are still very much involved in getting everything ready for the test and other R&D. Still I hope you can find the time for a quiet and cosy Christmas together with your family. Happy Christmas and an energetic new year!
Thanks and kind regards, Gerard
Dear Andrea,
in Sweden the use of heat-pumps is widespread: about one million of them are in use.
Do you think the Ecat SKL could increase the COP of the system ?
Regards,
Frederick Somerville
For a better understanding of your paper – E-Cat SK and long-range particle interactions, I feel it is necessary to read the supporting papers.
Of particular interest to me was paper reference 13 – Electron Structure, Ultra-dense Hydrogen and Low Energy Nuclear Reactions, the description of the electron allows me to better visualise the nuclear interactions, I feel this reference is the most important of the papers to help understanding.
Paul di Anno:
1 we will give these data during the presentation
2 see above
3 see above
4 should be, but remember that we still have not finished the R&D and, albeit I am optimist, the product is still not ready to be served.
Warm Regards,
A.R.
Ulrich W.A. Kranz:
You can also turn all the electricity into heat with COP 1, when you go from electricity to heat, because production of heat generates a much higher entropy.
So you can choose how much electricity to make and how much heat just using the percentage you want of electricity to fuel an electric heater.
Warm Regards,
A.R.
One ecat skl is enough for a home using ? I mean the heat production Is enough to warm a 100 mt apartment ? In the same time you can produce enough electric current for a normal family needs ? A normal electricist and plumber can install It like a normal “boiler” ? Best regards and take care of you.
Dear Andrea:
In Germany the cost of heating is growing up and up.
1 can the Ecat SKL be used also to make heat?
2 can the Ecat SKL operate for a maximum/minimum of electricity ?
Dear Andrea,
I don’t understand why you are wasting time setting up your presentation in Sweden. You do not have to prove anything to the general public.
You have a device which can be easily transported along with its test equipment and a trained technical force who can demonstrate it. The time you are devoting to your planned demo could be used to perform the necessary demonstrations before a number of interested commercial parties who can provide their own technical experts for determining its value and authenticity. You should not have any problem getting as much venture capital as you need to complete its introduction into main stream industry.
I have seen many much less promising devices obtain capital from large corporations and I think you will have, as you have previously experienced, many inquiries from many sources.
Successful regards.
@ Italo R
Non solo Isaac Asimov (Tiotimolina) ma anche Jacques Benveniste (La memoria dell’acqua) sono stati gli ispiratori della mia favoletta, che ho scritto solo per alleviare per un attimo lo Spirito di Andrea Rossi in questi giorni di grande impegno.
Pensi che io debba preparare uno schizzo del mio circuito di magnetizzazione?
Magari qualcuno me lo potrebbe chiedere!
@ Italo R
Not only were Isaac Asimov (Thiotimoline) but also Jacques Benveniste (The memory of water) the inspirers of my tale, which I wrote only to alleviate Andrea Rossi’s spirit for a moment in these days of great commitment.
Do you think I need to prepare a sketch of my magnetization circuit?
Maybe someone could ask me!
Dr Rossi,
Will you also sell the SKL to all, or you will only sell electricity to industries?
I hope everybody will be able to have an Ecat SKL.
Best Regards,
Martin Himpe
It isn’t the first time that in science the time isn’t that fixed entity we know.
Google “The Endochronic Properties of Resublimated Thiotimoline”
Obviously it’s a joke. But the great Isaac Asimov wrote about it a nice novel.
And scientists asked him more informations because they believed it was a true fact.
The future use of electric-powered airlines is already under study by major airline manufacturers. The major issue is the energy density of batteries. The current thoughts seem to be a hybrid system using carbon-based fuels to charge a battery or energy storage system (capacitors?). The stored energy would be used to facilitate take-off, recharge while in cruise, and then use the stored energy to support landings/possible abort and climb.
The eCat SK Leonardo, if successful, conceptually could replace the carbon-based fuel subsystem. The 6-months to one year lifetime of the eCat SK Leonardo would save the refueling time and costs of conventional fuel. Once you successfully demonstrate the technology, I suggest you (or someone working for you) contact the manufacturers. May be drop off a sample unit for an evaluation?
1. How often does the E-Cat SKL require a recharge assuming it was operating continously?
2. Is a recharge as simple as changing a battery in an electronic device?
3. What is the cost of a recharge?
Enea Romagnoli
Could be that what happens after, affect the before?
Such magnetization transient could interact locally with the time?
Worths investigate.
Grazie Andrea per questo interessantissimo blog.
If the eCat SK Leonardo can be combined in parallel and serially, it might be a candidate for electric powered airlines. A typical airline uses around 90MW of power for take-off, less during cruise. So a eCat SK Leonardo (1kW, 0.1kg, 0.1m on a side cube) module would need about 100,000 such modules. Assuming packaging of 5m x 20m x 1m, a mass of 10,000 kg and a suitable short term battery for take-off/landings, it would be conceptually possible to fly long duration flights.
Caro Andrea a Frank Acland dici che presenterai il nuovo E-CAT anche dopo la presentazione di
STOCCOLMA . Sara forse in ITALIA ? Posso già prenotare un posto ? Così potremo rivederci di nuovo come a Pordenone , anni fa ! Saluti carissimi ed auguri affettuosissimi per le prossime festività a Te a Tua moglie e a tutta la TUA SQUADRA DELLA QUALE IO MI SENTO UNO DI LORO !!! Giannino Lodovico da Cherso di Udin de Trieste ….
Enea Romagnoli:
Thank you for your insight,
Warm Regards,
A.R.
Caro Andrea,
visto il contenuto di alcuni posts appena pubblicati credo che sia necessario fornire una spiegazione conclusiva sulla mia storiella “Come gli Elettroni prevedono il futuro”
Very Long Range Electons Interactions (VLREI)
di
Enea Romagnoli
Alcuni posts appena pubblicati mi hanno permesso di capire l’origine del fenomeno che avevo visto.
Basandomi su quanto riportato dalla tua teoria LRPI penso di poter pubblicare anche la mia teoria VLREI.
Tutti gli Elettroni sono interconnessi in un continuum spaziale e temporale, quindi nel momento in cui io stavo per schiacciare il pulsante per attivare la scarica elettrica sulla bobina del magnetizzatore, gli Elettroni del mio cervello si premuravano di avvertire gli Elettroni della bobina che una ingente quantità di Elettroni era in arrivo, quindi di predisporsi a fluire nella giusta direzione.
Fine della storiella!
Dear Andrea,
given the content of some posts just published, I believe it is necessary to provide a conclusive explanation of my story “How electrons predict the future”
Very Long Range Electons Interactions (VLREI)
by
Enea Romagnoli
Some posts just published allowed me to understand the origin of the phenomenon I had seen.
Based on what your LRPI theory reports, I think I can also publish my VLREI theory.
All the Electrons are interconnected in a spatial and temporal continuum, so when I was about to press the button to activate the electric discharge on the magnetizer coil, the Electrons of my brain were careful to warn the Electrons of the coil that a huge amount of Electrons was on the way, so to be prepared to flow in the right direction.
End of the story!
Enea
It remains a challenge to understand where the E-Cat’s energy comes from.
As I am trying to understand it now, the interactions between the particles form a kind of “energy pump”, similar to a heat pump, but where space-time is the medium. Then the space-time – for our perceptions – is stretched, so that it can receive entropy from the environment, after which this space-time returns to our world, with a part of added energy, and which is structured within the structures of the energy-bearing waves. .
Is this nonsense or can I think a little further in that direction?
Hello DR Rossi
Can you say what type of
work the 23 members of
your team work at?
Regards
Sam
Frank Acland:
1 yes
2 23
3 I think so
Warm Regards,
A.R.
Frederick Somerville:
Thank you for your insight. It is reasonable.
Warm Regards,
A.R.
Just a question regarding use of heatpumps with a Ecat-SKL.
COP of the Heatpump is what is at any given moment, function of outside temp if it is an Air to Air for example.
If the goal of the system is heat one can use, in the case of my house, a 15 Kw Ecat-SKL and hook it up to my old waterbased electrically operated hotwater based radiator system.
I then need a 15 kW Ecat SKL.
Or I can use an heatpump (the one I have) with COP (all year average ~ 3) and only need a 5 kW Ekat SKL(say 10 kW with 5 kW to spare). The COP of the heatpump is the same as before but I can either use a smaller Ecat and get the same heat as with a 15kW unit to a COP 1 hotwater heater – or smaller 5 kW unit and still get my 15 kW of heat (the sun gives me the other 10 kW).
So the use of a heatpunmp meas I can use a smaller Ecat if heat is what I need the Ecat for. If the Ecat is unexpensive and small then this argument falls flat on its face, one simply adds as much Ecat SKL power as one needs.
Regards Frederick
Dear Andrea,
About your team:
1. Is the team that is working with you on the various aspects of the E-Cat growing since your first successful run of the E-Cat SKL in November?
2. How many persons are now in the team, roughly?
3. Will we hear from some of your team members at the upcoming presentation?
Kind regards,
Frank Acland
Gerard McEk:
1 yes
2 n.a.
3 what the certificators will deem opportune
Happy Christmas, likewise, and a Great 2020 to you and your Family!
A.R.
Italo R.:
No.
Warm Regards,
A.R.
Paul di Anno:
Yes, we have. The names of our Partners are confidential.
Warm Regards,
A.R.
Enea Romagnoli, I presume you discovered an interesting fact regards the enigmatic electron. From what I am aware there is no space between objects as nature is interconnected by the electron field. What I suspect is the electrons of the wire sensed your presence and reacted. Your sensitive equipment registered this reaction of your field with that of the electrons. Tesla was way in front of his time with regards understanding the electron. Regards Eric Ashworth
Dear Mr Rossi , do you have a partnership with an important manufacturer for the electronic parts or some other unveiled parts ? If yes, Will you reveal It on the presentation ? Best regards
Dr. Rossi,
the current test on the E-Cat SKL will surely be positive, and its report will be shown during the subsequent presentation in Stockholm.
If unfortunately the test result should not be positive, will there still be the presentation?
Sincerely,
Italo R.
Dear Andrea,
Just a few questions regarding the upcoming test in January:
1. Will the tested ECat be the same as the one reached full SSM on the 24th of November?
2. If not, will it be more or less powerful?
3. What will be the estimated duration of the test?
I know you are still very much involved in getting everything ready for the test and other R&D. Still I hope you can find the time for a quiet and cosy Christmas together with your family. Happy Christmas and an energetic new year!
Thanks and kind regards, Gerard
Frederick Somerville:
Yes.
Warm Regards,
A.R.
Dear Andrea,
in Sweden the use of heat-pumps is widespread: about one million of them are in use.
Do you think the Ecat SKL could increase the COP of the system ?
Regards,
Frederick Somerville
Dear Andrea Rossi,
One question please, how much time do you think is necessary to be able to mass produce the SKL ?
Warm Regards,
Toussaint François
Dear Andrea,
For a better understanding of your paper – E-Cat SK and long-range particle interactions, I feel it is necessary to read the supporting papers.
Of particular interest to me was paper reference 13 – Electron Structure, Ultra-dense Hydrogen and Low Energy Nuclear Reactions, the description of the electron allows me to better visualise the nuclear interactions, I feel this reference is the most important of the papers to help understanding.
Regards,
Keith Thomson.
Dr. Rossi:Why have you abanded the E-Cat used solely for heat production?
Paul di Anno:
1 we will give these data during the presentation
2 see above
3 see above
4 should be, but remember that we still have not finished the R&D and, albeit I am optimist, the product is still not ready to be served.
Warm Regards,
A.R.
Sam:
We are working in the USA and in Europe.
Warm Regards,
A.R.
Ulrich W.A. Kranz:
You can also turn all the electricity into heat with COP 1, when you go from electricity to heat, because production of heat generates a much higher entropy.
So you can choose how much electricity to make and how much heat just using the percentage you want of electricity to fuel an electric heater.
Warm Regards,
A.R.
The second question means: which is the min % of electricity the SKL can yield and how much the max % of heat ?
Hello DR Rossi
Where are you working?
Regards
Sam
One ecat skl is enough for a home using ? I mean the heat production Is enough to warm a 100 mt apartment ? In the same time you can produce enough electric current for a normal family needs ? A normal electricist and plumber can install It like a normal “boiler” ? Best regards and take care of you.
Lotr Mileikowsky:
No.
Warm Regards,
A.R.
Eernie1:
Thank you for your insight.
Warm Regards,
A.R.
Ulrich W.A. Kranz:
1 yes
2 can you rephrase ? I do not understand exactly your question
Warm Regards,
A.R.
Dear Andrea:
In Germany the cost of heating is growing up and up.
1 can the Ecat SKL be used also to make heat?
2 can the Ecat SKL operate for a maximum/minimum of electricity ?
Dear Andrea,
I don’t understand why you are wasting time setting up your presentation in Sweden. You do not have to prove anything to the general public.
You have a device which can be easily transported along with its test equipment and a trained technical force who can demonstrate it. The time you are devoting to your planned demo could be used to perform the necessary demonstrations before a number of interested commercial parties who can provide their own technical experts for determining its value and authenticity. You should not have any problem getting as much venture capital as you need to complete its introduction into main stream industry.
I have seen many much less promising devices obtain capital from large corporations and I think you will have, as you have previously experienced, many inquiries from many sources.
Successful regards.
Dear Dr. Rossi,
I have only one very heretical question:
Is E-Cat SK and/or SKL technology capable of producing matter i.e. particular elements?
@ Italo R
Non solo Isaac Asimov (Tiotimolina) ma anche Jacques Benveniste (La memoria dell’acqua) sono stati gli ispiratori della mia favoletta, che ho scritto solo per alleviare per un attimo lo Spirito di Andrea Rossi in questi giorni di grande impegno.
Pensi che io debba preparare uno schizzo del mio circuito di magnetizzazione?
Magari qualcuno me lo potrebbe chiedere!
@ Italo R
Not only were Isaac Asimov (Thiotimoline) but also Jacques Benveniste (The memory of water) the inspirers of my tale, which I wrote only to alleviate Andrea Rossi’s spirit for a moment in these days of great commitment.
Do you think I need to prepare a sketch of my magnetization circuit?
Maybe someone could ask me!
Martin Himpe:
We will talk of out strategy during the presentation,
Warm Regards,
A.R.
Dr Rossi,
Will you also sell the SKL to all, or you will only sell electricity to industries?
I hope everybody will be able to have an Ecat SKL.
Best Regards,
Martin Himpe
Steven N. Karels:
Premature. Too much premature.
Thank you for the suggestion, though.
Warm Regards,
A.R.
Nestor:
Thanks,
Warm regards,
A.R.
Some really nice stuff on this web site, I like it.
@ Alessandro Coppi:
It isn’t the first time that in science the time isn’t that fixed entity we know.
Google “The Endochronic Properties of Resublimated Thiotimoline”
Obviously it’s a joke. But the great Isaac Asimov wrote about it a nice novel.
And scientists asked him more informations because they believed it was a true fact.
Dear Andrea Rossi,
The future use of electric-powered airlines is already under study by major airline manufacturers. The major issue is the energy density of batteries. The current thoughts seem to be a hybrid system using carbon-based fuels to charge a battery or energy storage system (capacitors?). The stored energy would be used to facilitate take-off, recharge while in cruise, and then use the stored energy to support landings/possible abort and climb.
The eCat SK Leonardo, if successful, conceptually could replace the carbon-based fuel subsystem. The 6-months to one year lifetime of the eCat SK Leonardo would save the refueling time and costs of conventional fuel. Once you successfully demonstrate the technology, I suggest you (or someone working for you) contact the manufacturers. May be drop off a sample unit for an evaluation?
Steven N. Karels:
Honestly, we are very far from this. I am not able to answer, I do not know the matter.
Warm Regards,
A.R.
Frank Acland:
1 6-12 months, to be verified in time
2 yes
3 will be defined during the presentation. Not much, though.
Warm Regards,
A.R.
Dear Andrea,
1. How often does the E-Cat SKL require a recharge assuming it was operating continously?
2. Is a recharge as simple as changing a battery in an electronic device?
3. What is the cost of a recharge?
Many thanks,
Frank Acland
Enea Romagnoli
Could be that what happens after, affect the before?
Such magnetization transient could interact locally with the time?
Worths investigate.
Grazie Andrea per questo interessantissimo blog.
Alessandro Coppi
Dear Andrea Rossi,
If the eCat SK Leonardo can be combined in parallel and serially, it might be a candidate for electric powered airlines. A typical airline uses around 90MW of power for take-off, less during cruise. So a eCat SK Leonardo (1kW, 0.1kg, 0.1m on a side cube) module would need about 100,000 such modules. Assuming packaging of 5m x 20m x 1m, a mass of 10,000 kg and a suitable short term battery for take-off/landings, it would be conceptually possible to fly long duration flights.
Keith T.:
Correct.
Warm Regards,
A.R.
Enea Romagnoli:
Elettrone, questo sconosciuto…
Electron, this unknown object…
Thank you for your insight,
Warm regards,
A.R.
Raffaele Bongo:
1- no
2- no
Warm Regards,
A.R.
Iggy Dalrymple:
That would be great!
Warm Regards,
A.R.
Caro Andrea a Frank Acland dici che presenterai il nuovo E-CAT anche dopo la presentazione di
STOCCOLMA . Sara forse in ITALIA ? Posso già prenotare un posto ? Così potremo rivederci di nuovo come a Pordenone , anni fa ! Saluti carissimi ed auguri affettuosissimi per le prossime festività a Te a Tua moglie e a tutta la TUA SQUADRA DELLA QUALE IO MI SENTO UNO DI LORO !!! Giannino Lodovico da Cherso di Udin de Trieste ….