United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

24,355 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Mattias Andersson:
    Thank you for your insight and your link.
    Merry Christmas to you as well !
    A.R.

  • Andrea Rossi

    Tom Conover:
    Thank you for the link,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Manuel Cilia:
    It is not more complex.
    Warm Regards,
    A.R.

  • This is getting exciting, cannot wait to start designing with the new Ecats. Dr Rossi is the output directly from the Ecat DC that we can use an inverter or is it more complex

    Thank you

  • Tom Conover

    Dear Andrea,

    For your reading enjoyment:

    Posted online 12/22/2019 …
    Invisible Quantum Weirdness Enables Heat Energy to Travel Through Complete Vacuum
    https://scitechdaily.com/invisible-quantum-weirdness-enables-heat-energy-to-travel-through-complete-vacuum/
    Thank you for your persistence in researching products.

    Tom

  • Dear Andrea Rossi,

    While I’m not an expert on the topic of nuclear physics, I did buy the book by Norman D. Cook a few years ago (after your recommendation in this blog).

    I think the FCC lattice model described by Cook has some very beautiful properties. One of these properties is that the tetrahedral geometry of the helium nucleus serves as a building block for any other elementary particle. It was also a revelation to me that the lattice model is derived entirely from the Schrödinger equation.

    A few years back I developed a modeling language for describing 3D geometries using recursive rules.

    I have now managed to create a model of a geometry that is almost identical to the lattice generated by the NVS software. Demo available here (requires a browser with WebGL support):
    https://modeler.longknot.com/

    My hope is that this will be a useful tool for further theoretical research and that the lattice model will become more established within the scientific community.

    Features of the FCC lattice demo program:
    – adjustable number of protons and neutrons
    – visualize tetrahedral lattice structure
    – multiple colourings (similar to NVS): spin, isospin, magnetic spin, total spin, principal

    Feature of the modeler.js library:
    – rule based programming language for creating complex geometries
    – define both geometries and animation paths using recursive rules
    – key frame animation support
    – skeletal animation support
    – define geometries using scaling, rotation and translation operators
    – context-free grammars (no variable assignments)
    – extrude geometries along animation paths by using nested rules/transforms
    – support for camera animation
    – all geometric transformations represented using quaternions
    – isosurface support
    – WebGL custom shader support

    Once again, kudos to you and your team for your great work on the E-Cat SKL. Very much looking forward to 2020!

    Wishing you all a Merry Christmas!

    Kind Regards
    Mattias Andersson

  • Andrea Rossi

    Vitale:
    I confirm that the Ecat SKL ie expected to be a modular small cube that can be combined in series and parallels to reach any desired power.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stephen:
    Thank you for your insight. I cannot add further information about these issues.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Sam:
    Thank you for the information,
    Warm Regards,
    A.R.

  • Stephen

    Dear Andrea Rossi

    Season greetings from you and your team. What a star you have for the Christmas tree this year!

    I’m not sure if someone asked this already but I was wonder something about the core temperature of the e-cat SKL. I think you mentioned it had a maximum core temperature of 10000K. I’m wondering if the core temperature depends on

    1. the over all power rating of the device including electricity output.
    2. Or if It depends solely on the thermal output power.

    For example something like 10000K when all the energy is thermal and perhaps closer to 7900K when making maximum electrical impact.

    If the later then 7900K is still 1.5 times hotter than the solar photosphere. So there could be still significant optical out put in that spectrum. As well as infrared.

    I wonder if that optical output if it occurs could be usefully used rather than just converting it to heat. Obviously at the high temperature in the device it would be difficult for traditional photo volt is to be used. But perhaps by use if quartz optics the remaining UV and Optical parts of the emission could be refracted or separated somehow and redirected to a cooler zone where it can be usefully used.

    I suppose it would depend how much useful energy is in that part of the spectrum though.

    Obviously if only IR energy remains in the Electrical out put device most of what I just said does not apply.

    Best Regards
    Stephen.

  • Vitale

    Good morning Mr. Rossi

    Could you please confirm what we readers have understood from your answers, that the SKL is a modular apparatus, that is made of many 10x10x10 “cubes” connected together, so that an SKL assembly can be configured at the desired power? I.E. the 20 kW module is build with n 1-2(?)kW cubes? And that a cube weight is 500-1000 grams so that make sense that a 20 kW assembly weight is 10-20 kg?

    My best regards

    Vitale

  • Andrea Rossi

    Angelo Bilbao:
    Thank you for your attention
    Warm Regards,
    A.R.

  • Angelo Bilbao

    Thankyou for helping out with the wonderful information you give about the struggle against the global warming.
    Angelo

  • Andrea Rossi

    John Atkinson:
    I did not say I do not know when the third party certification will begin.
    I still think the demo will be made within February 2020, but this is not defined, yet.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Svein Henrik:
    The technical data of the SKL will be given at the presentation.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Iggy Dalrymple:
    1 The Ecat SKL has not been cleared as a product, yet. It is premature to talk of orders
    2 This information will be given at the presentation of the product when the product
    Warm Regards,
    A.R.

  • Iggy Dalrymple

    I’m confused. You say that you have very few orders for E-Cat SKL. What were your many thousands of preorders for E-Cat for? Were they for an obsolete non-existent product? I had assumed that my early multiple orders and support for your eventual product would move me to the head of the line for your first mass produced product.

    You say that your E-Cat SKL is suitable for heating air only. If a homeowner wanted to produce his household demand for hot water, would you recommend that the water be heated by SKL supplied electricity or with an added heat exchanger? Do you intend to market the required heat exchanger?

    Best (but confused) regards,
    Iggy Dalrymple

  • Svein Henrik

    Dear Andrea
    As SKL transfers its heat to air, what temperature does the air have when it leaves the unit?
    Warm Regards Svein Henrik.

  • John Atkinson

    Mr. Rossi,
    Since you do not know when the third party will begin its test do you still believe the demonstration will be ready by the end of January or the beginning of February?
    Merry Christmas and happy New Year

  • Eric Ashworth

    Enea Romagnoli, I presume you are interested in the electron shell because it is a fascinating subject. As an introduction to the field of the electron I can refer you to an interesting study as to why the Earth rotates in its attempt to remain neutral within its field of endeavour. An interesting experiment regarding centroidal forces. Take a metal rod, any type of metal, heat it to red heat or close to and centrifuge it. One end inner most one outer most until cold. Then place on a pivot or float from central position in same axis as centrifuged. Expose it to heat, light or cold. Map its magnetic/electron field. Then imagine the Earth as four centroids, each contributing to the N.S. poles of the Earth. For me it’s an introduction to magnetic electro motion regarding shells within an outer environment.
    Regards Eric Ashworth.

  • Andrea Rossi

    Ulrich W.A. Kranz:
    This will depend on the specific cases. The Ecat SKL heats air. To heat other fluids will need a heat exchanger.
    Warm Regards,
    A.R.

  • Ulrich W.A. Kranz

    Dear Andrea:
    Are you planning to equip the Ecat SKL with a heat exchanger to heat water or other fluids?
    Merry Christmas and happy new year to you and your Team,
    Ulrich W.A. Kranz

  • Andrea Rossi

    Milan:
    1 no
    2 yes
    Warm Regards,
    A.R.

  • Andrea Rossi

    Eric Schlinger:
    No, the Ecat SKL is not ready.
    Happy Christmas to you and your family,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rodney Veroba:
    Yes, and the update born by the experiment on course will be adjourned on
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Warm Regards,
    A.R.

  • Rodney Veroba

    Are you in this period also working on the theory at the base of the Ecat SKL operation?

  • Eric Schlinger

    Have you started to accept orders for the SKL ?
    Happy holidays to you, your family and your team,
    Eric Schlinger

  • Milan

    Dear Dr. Rossi!

    1. Did you already transfer the Ecat SKL to the third party for testing.

    2. Do you already know, when the third party test will begin.

  • Andrea Rossi

    Rudyswiss:
    1 not many
    2 premature
    3 premature
    Thank you for your kind wishes, likewise to you
    Warm Regards,
    A.R.

  • Andrea Rossi

    Frank Acland:
    measurements with the Ecat SKL
    Warm Regards,
    A.R.

  • Rudyswiss

    Dear Andrea:
    1 how many pre-orders do you have so far for the Ecat SKL ?
    2 how mny SKL you think you will sell in 2020 ?
    3 and in 2021 ?
    Kind Regards and “prosperoso nuovo anno”!
    Rudyswiss

  • Frank Acland

    Dear Andrea,

    What is taking most of your time and attention in these days?

    Best wishes,

    Frank Acland

  • Andrea Rossi

    Svein Henrik:
    Heat is an asset. It can be recovered by heat exchangers with any suitable heat exchangeing fluid.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Mike Phalen:
    Theoretically yes.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Martyn Aubrey:
    Yes, the energy output should be modulated in real time.
    Warm Regards,
    A.R.

  • Martyn Aubrey

    Dear Dr Rossi,

    You said that the Ecat SKL can “give electricity and heat, wherever they are needed”.

    If the Ecat is used to generate the electricity to power a motor vehicle, can the Ecat adjust its electric output quickly enough for the electric motor to provide the almost immediate extra mechanical torque required for fast acceleration or hard cross-country driving?

    Best wishes for the test of the Ecat SKL and the presentation in January or February.

    Festive Regards
    Martyn Aubrey

  • MIKE PHALEN

    Hi Dr. Rossi,

    1. If a 20kw E-cat SKL was installed in a home to handle peak power demand for the house, but the average demand for the house was only 1kw, could the E-cat provide an average of 19kw to the grid if the economics worked out?

    2. Could this contribute to lowering the energy cost for the home owner?

  • Svein Henrik

    Dear Andrea
    The energy off 20 to 30 % in form of heat produced by the SKL is to be removed from it.
    To keep this energy for a useful purpose is a benefit.
    Do you intend to poduce the unit in a shape to removed/reuse this energy by air or by water?
    Best regards Svein Henrik

  • Andrea Rossi

    Chuck Davis:
    The Ecat is supposed to give electricity and heat, wherever they are needed.
    Warm Regards,
    A.R.

  • Chuck Davis

    Dear Andrea,
    Could an Ecat retrofit an oven ?
    Warm Regards,
    Chuck Davis

  • Andrea Rossi

    Toussaint Francois:
    Sorry, we only will communicate information after the end of it.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Frank Acland:
    Thank you for the suggestion.
    Warm Regards,
    A.R.

  • Frank Acland

    Dear Andrea,

    Microsoft gets a license fee from every computer sold that has the Windows operating system on it, Windows is sold in computers made by many different companies.

    The same is true with Intel when their chip is used in computers (my laptop has an ‘Intel Inside’ sticker on it).

    Have you thought of an ‘E-Cat Inside’ licensing strategy, where E-Cats can be incorporated into products from many manufacturers, and you get a license fee for each product sold?

    Could be one way to get a speedy diffusion of your technology.

    Best wishes,

    Frank Acland

  • toussaint françois

    Dear Andrea Rossi,

    One question please, do you know when will start the verification of the SKL, and if yes the date ?

    Warm Regards

    Toussaint François

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com
    to find comments published in other posts of this blog,
    Warm Regards,
    A.R.

  • Andrea Rossi

    WaltC:
    I will see what is possible to do.
    An update will surely be made based on the theoretical confirmations derived from the experiments on course. But a theoretical paper must be rigorous. My paper can also be read skipping the math and reading the core of it, that is not very difficult.
    Warm Regards,
    A.R.

  • WaltC

    Dr. Rossi,
    During your upcoming presentation, if an audience member asks, “At a high level, where does the energy for the E-Cat SKL come from?”–

    Are you going to refer them to your paper?:
    http://www.researchgate.net/publication/330601653_E-CAT_SK_and_long_range_particle_interactions

    or are you going to also provide an answer that’s more readily grasped by the average “layperson”?

    Ungraspingly yours, WaltC

  • Andrea Rossi

    The work that usually R&D members do, obviously specifically for our sector: electronics, chemicals, thermodynamics, manufacturing, physics etc.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Koen Vandewalle:
    To think is always useful.
    About my theoretical directions, they have been disclosed in my paper
    http://www.researchnet.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Probably during the presentation of the SKL an update will be introduced.
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>