February 29, 2020 at 2:10 PM You said: surely it will also be streamed in internet probably live. What can you say about the third party test today?
Warm Regards
Sture Andreasson
you mentioned that the ECAT SKL is a small cube with a weight of 100g.
This means the cube is approximately only 3*3*3 cm.
1. Is this near the reality?
2. How many ECAT SKL can be controlled by the control unit?
3. You mentioned the control unit is as large as a pack cigarettes. Is that still the case?
I’m very curious about power and electrical output.
Gerard McEk:
There are more than two parties examining the SKL.
1 no
2 yes
3 some has
4 C ( Clients )
5 obviously
6 the certifications will be presented when the product will be for sale, the tests are under NDA, eventually it will depend on the situations
7 with the corona virus restrictions nobody can schedule anything
Warm Regards,
A.R.
Dear Andrea,
If I understand it right, there are two parties testing the E-Cat SKL.
Some questions about that, if I may:
1. Does each party have a separate E-cat for testing?
2. Is/Are this/both E-cat(s) at your lab?
3. Have both parties started testing?
4. You said there is an ‘independent third party’ test entity, that is not payed by you. What makes them testing it anyway:
A. Payed by another party
B. Because they are curious
C. Some other reason
5. Are these 3rd party tests be done by a company specialized in this and doing this?
6. Will the test/certification results be presented at the same time when both parties are finished or are they be presented separately?
7. What is roughly the current estimate when both are finished?
Thank you for answering our questions.
Kind regards, all the best and good health, Gerard
Frank Acland:
The two things are completely independent from each other.
The certification entity is paid by us to make the product certification, while the independent third party is not paid by us.
Warm Regards,
A.R.
Dear Dr
A follow up question to Your answer to Gavino Mamia on March 24(the small blue cube).
How much would the cube in question(unimagined) weigh?
B R & Be safe, Henrik
PS, no need to ban Anonymous, who is probably more of a dog person;) DS
Dr Rossi:
I studied with attention http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
and I discovered that the electric enregy you extract from the plasma does not come from the nucleus, but from the electrons, therefore your theoretical system, as it is proposed in the paper, depends of the physic of the electron inspired by the model proposed from Hestenes, not from the usual models of the LENR. Am I correct ?
Ruby
As time goes on and you and your team has improved the eCat SKL, are you now in a position where you can definitively state the eCat SKL is operating:
a. reliably
b. within your desired output power range
c. With a sufficiently high electrical energy conversion/generation ratio (compared to total energy produced)
Dear Andrea,
There are lots of opinions on which measures should be implemented to fight the Covid-19 pandemic. It is important, however, to have a solid understanding to base the opinions on.
Here’s a mathematical analysis of how the pandemic behaves, in China, Italy, Spain, and Sweden, with some attempts at forecasting, that I think could be interesting. I am looking at the number of deaths which is more reliable than the number of confirmed cases. The main take-away is that the daily number of deaths culminates ONLY when you manage to push down the daily growth of deaths below 10 percent, AND if you keep pushing it down.
China and Italy have managed to do this. It is not entirely clear, however, that the decline of growth depends only of the lockdown, since the decline starts on the same day that the lockdown is implemented, which is not possible—the decline in the growth of deaths should be delayed by at least one week. So there might be other explanations, including herd immunity, if the true number of cases is much larger than the number of confirmed cases, most of them being without symptoms. https://matslew.wordpress.com/2020/03/27/covid-19-we-have-to-push-down-daily-growth-below-10-percent/
Mr Rossi,
Many persons are writing in the blogs that the Ecat will never work, because you are working on it 10 years since and after 10 years it does not work.
Comments?
Colin Watters:
Please read better: KeithT did not ask if we have completed the certifications, he asked if the certifications will include etc, and I answered yes to this, not to what you say.
The certifications are on course and have not been completed. Obviously they will be completed before we put in commerce the product, which means when the Ecat SKL will be ready to be put in commerce, and it is not now. Obviously, when the product will be in commerce the certifications will be made public, not before, for reasons that are obvious; everybody familiar with the matter knows that the procedures for certifications of products are always covered by NDA until they are granted and the trolls that are making a mess about this issue are paid by guys that are shooting their usual tennis balls to try to stop the carrier of our work.
Warm Regards,
A.R.
Hello A. Rossi
I see that your work is going for the best despite the difficult period the world is going through and I hope to see your machine on the market as soon as possible.
The Covi 19 plunged the price of a barrel of oil to around 22 $.
With the competition from Ecat, do you think that oil is likely to remain at this level or even experience even lower levels?
All my encouragement to the whole team
Best regards
Raffaele
Dear Andrea,
I am quite enthusiastic to read that the E-Cat SKL is being certified for domestic use.
1. I assume the tests go as expected?
2. I can’t wait to buy one if they come available. I hope you can safe me one of the first production charge.
Also good to read that Skype helps you to continue your work.
Good luck with all the work you and your team are doing and I hope you all stay healthy.
Thanks, kind regards, Gerard
1. Do I understand correctly that you are interacting with third party testers via Skype?
2. Are you running tests on the E-Cat SKL in your lab that they are able to observe?
3. Are they compiling data about their observations?
4. When they are able, will they visit your lab, or will you go to them?
5. Will a report be written about this Skype testing, or is it more informal?
You answered “The answer to this is confidential.”
Is the answer:
(a) that spectral lines are present is confidential or
(b) is the answer that there are spectral lines that are present but as to which atoms produced them is confidential?
Andrea, please take a few moments to review this article which may allow your system to be used more effectively in diverse environments.
May your days be fruitful and wisdom allowed to be used in health.
Graded nanocomposite metamaterials for a double-sided radiative cooling architecture with a record breaking cooling power density.
Abstract – As an emerging electricity-free cooling technology, radiative cooling employs outer space as the heat sink. With this, a sky-facing thermal emitter is usually required. Due to the blackbody radiation limit ambient temperature, the maximum cooling power density for a single-faced radiative cooling device is ~156.9W/m2. Here we report a double-sided radiative cooling architecture using graded nanocomposite metamaterials (GNM) designed for a vertically aligned thermal emitter. This GNM structure possesses an optical absorption of over 90% throughout the solar spectrum, and exceeds 90% reflection in the mid-infrared spectral region. With this configuration, both sides of a planar thermal emitter can be used to perform radiative cooling and a record cooling power density beyond 280 W/m2 was realized in a single thin-film thermal emitter. Under the standard pressure, we realized a temperature reduction of 14 C below the ambient temperature in the laboratory environment, and over 12 C in the outdoor test.
“I do not understand your questions. Which atoms are you asking about?”
The discharge that you have, I assume, in the eCat SKL from which you extract useful electrical energy. Your previous demonstration had a discharge, nicknamed the ballerina, and had a discharge of light energy whose spectrum included the ultraviolet.
Does your current implementation of the eCat SKL include such light generation?
If so, then my question refers to atoms within the “ballerina” that might show spectral lines indicative of certain atoms (e.g., hydrogen, helium, lithium, etc.).
Gavino Mamia:
He,he,he…I understand your feeling, but I cannot anticipate the photo of the Ecat SKL. But you imagine a small blue cube, that’s what it will be.
Warm Regards,
A.R.
February 29, 2020 at 2:10 PM You said: surely it will also be streamed in internet probably live. What can you say about the third party test today?
Warm Regards
Sture Andreasson
Dear Andrea,
you mentioned that the ECAT SKL is a small cube with a weight of 100g.
This means the cube is approximately only 3*3*3 cm.
1. Is this near the reality?
2. How many ECAT SKL can be controlled by the control unit?
3. You mentioned the control unit is as large as a pack cigarettes. Is that still the case?
I’m very curious about power and electrical output.
With my best regards
Ulrich
Gerard McEk:
There are more than two parties examining the SKL.
1 no
2 yes
3 some has
4 C ( Clients )
5 obviously
6 the certifications will be presented when the product will be for sale, the tests are under NDA, eventually it will depend on the situations
7 with the corona virus restrictions nobody can schedule anything
Warm Regards,
A.R.
Dear Andrea,
If I understand it right, there are two parties testing the E-Cat SKL.
Some questions about that, if I may:
1. Does each party have a separate E-cat for testing?
2. Is/Are this/both E-cat(s) at your lab?
3. Have both parties started testing?
4. You said there is an ‘independent third party’ test entity, that is not payed by you. What makes them testing it anyway:
A. Payed by another party
B. Because they are curious
C. Some other reason
5. Are these 3rd party tests be done by a company specialized in this and doing this?
6. Will the test/certification results be presented at the same time when both parties are finished or are they be presented separately?
7. What is roughly the current estimate when both are finished?
Thank you for answering our questions.
Kind regards, all the best and good health, Gerard
Ruby:
Basically, you are right.
Warm Regards,
A.R.
Henrik:
about 100 grams.
Warm Regards,
A.R.
Frank Acland:
The two things are completely independent from each other.
The certification entity is paid by us to make the product certification, while the independent third party is not paid by us.
Warm Regards,
A.R.
Dear Dr
A follow up question to Your answer to Gavino Mamia on March 24(the small blue cube).
How much would the cube in question(unimagined) weigh?
B R & Be safe, Henrik
PS, no need to ban Anonymous, who is probably more of a dog person;) DS
Dear Andrea,
So is the current third party testing preliminary, before submitting the SKL for product certification, or can the two things occur simultaneously?
Many thanks,
Frank Acland
Dr Rossi:
I studied with attention
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
and I discovered that the electric enregy you extract from the plasma does not come from the nucleus, but from the electrons, therefore your theoretical system, as it is proposed in the paper, depends of the physic of the electron inspired by the model proposed from Hestenes, not from the usual models of the LENR. Am I correct ?
Ruby
Steven N. Karels:
I’d say all of them, reasonably balanced. So far.
Warm Regards,
A.R.
Frank Acland:
There is no connection at all.
Warm Regards,
A.R.
Chuck Davis:
He,he,he…
Warm Regards,
A.R.
Dear Andrea, I recommend that you ban anonymous from owning an ecat!
Warm regards,
Chuck Davis
Dear Andrea,
What is connection between the third party testing you working on, and product certification?
Kind regards,
Frank Acland.
Dear Andrea Rossi,
As time goes on and you and your team has improved the eCat SKL, are you now in a position where you can definitively state the eCat SKL is operating:
a. reliably
b. within your desired output power range
c. With a sufficiently high electrical energy conversion/generation ratio (compared to total energy produced)
Mats Lewan:
Thank you for your contribution. I totally agree with your analysis.
Warm Regards,
A.R.
Anonymous:
Too bad,
Warm Regards,
A.R.
Buck:
Thank you and I wish you and your family the same,
Warm Regards,
A.R.
Dear Andrea,
There are lots of opinions on which measures should be implemented to fight the Covid-19 pandemic. It is important, however, to have a solid understanding to base the opinions on.
Here’s a mathematical analysis of how the pandemic behaves, in China, Italy, Spain, and Sweden, with some attempts at forecasting, that I think could be interesting. I am looking at the number of deaths which is more reliable than the number of confirmed cases. The main take-away is that the daily number of deaths culminates ONLY when you manage to push down the daily growth of deaths below 10 percent, AND if you keep pushing it down.
China and Italy have managed to do this. It is not entirely clear, however, that the decline of growth depends only of the lockdown, since the decline starts on the same day that the lockdown is implemented, which is not possible—the decline in the growth of deaths should be delayed by at least one week. So there might be other explanations, including herd immunity, if the true number of cases is much larger than the number of confirmed cases, most of them being without symptoms.
https://matslew.wordpress.com/2020/03/27/covid-19-we-have-to-push-down-daily-growth-below-10-percent/
Mr Rossi,
Many persons are writing in the blogs that the Ecat will never work, because you are working on it 10 years since and after 10 years it does not work.
Comments?
Dear Andrea,
this is a simple wish to your, your team, and the team of the testing agency:
Stay well, be healthy.
Respectfully,
Mason
Colin Watters:
Please read better: KeithT did not ask if we have completed the certifications, he asked if the certifications will include etc, and I answered yes to this, not to what you say.
The certifications are on course and have not been completed. Obviously they will be completed before we put in commerce the product, which means when the Ecat SKL will be ready to be put in commerce, and it is not now. Obviously, when the product will be in commerce the certifications will be made public, not before, for reasons that are obvious; everybody familiar with the matter knows that the procedures for certifications of products are always covered by NDA until they are granted and the trolls that are making a mess about this issue are paid by guys that are shooting their usual tennis balls to try to stop the carrier of our work.
Warm Regards,
A.R.
Dear Andrea, I was very interested in your reply to KiethT on the 25th March.
He asked if the current safety testing completed the certification requirements for E-Cat domestic use and you replied yes.
Can expand on your reply? Which standards will the E-Cat be certified as compliant with?
If it will be CE marked, which EN standards specifically will it meet?
Thanks.
A Chemical Guy:
Thank you for your attention to our theoretical research,
Warm Regards,
A.R.
Raffaele Bongo:
I have no idea.
Thank you for your kind sustain,
Warm Regards,
A.R.
Hello A. Rossi
I see that your work is going for the best despite the difficult period the world is going through and I hope to see your machine on the market as soon as possible.
The Covi 19 plunged the price of a barrel of oil to around 22 $.
With the competition from Ecat, do you think that oil is likely to remain at this level or even experience even lower levels?
All my encouragement to the whole team
Best regards
Raffaele
Dear Dr Andrea Rossi,
reading
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
I understood that your effect depends more from electrons physics -zitterbewegung effcct over all and Aharonov-Bohm effect- than from nuclear reactions.
Cheers
A Chemical Guy
Steven N. Karels:
It is confidential and I cannot respond in negative or in positive. I am simply not answering.
Warm Regards,
A.R.
Sam:
No. When obtained we will give due information.
Warm Regards,
A.R.
Frank Acland:
1 yes
2 yes
3 yes
4 both
5 it is more informal, for obvious reasons
Warm Regards,
A.R.
Gerard McEk:
1 premature
2 premature
Thank you for your kind wishes,
Warm Regards,
A.R.
Dear Andrea,
I am quite enthusiastic to read that the E-Cat SKL is being certified for domestic use.
1. I assume the tests go as expected?
2. I can’t wait to buy one if they come available. I hope you can safe me one of the first production charge.
Also good to read that Skype helps you to continue your work.
Good luck with all the work you and your team are doing and I hope you all stay healthy.
Thanks, kind regards, Gerard
Dear Andrea,
1. Do I understand correctly that you are interacting with third party testers via Skype?
2. Are you running tests on the E-Cat SKL in your lab that they are able to observe?
3. Are they compiling data about their observations?
4. When they are able, will they visit your lab, or will you go to them?
5. Will a report be written about this Skype testing, or is it more informal?
Thank you, and best wishes,
Frank Acland
Hello DR Rossi
Can you say what approved industry
standards (ANSI, ASTM, IEEE, UL, etc.)
that the ECat SKL is being tested against?
Regards
Sam
Dear Andrea Rossi,
You answered “The answer to this is confidential.”
Is the answer:
(a) that spectral lines are present is confidential or
(b) is the answer that there are spectral lines that are present but as to which atoms produced them is confidential?
Frank Acland:
Very much, in preparation of the real stuff.
Warm Regards,
A.R.
Salvatore Boi:
Yes, Freeman was a free man: in nomen omen,
Warm Regards,
A.R.
Jeff Smathers:
Thank you for the information and the link,
Warm Regards,
A.R.
KeithT:
Yes
Warm Regards,
A.R.
Dear Andrea,
Will the current safety testing complete the certification requirements for E-Cat domestic use?
Regards,
Keith Thomson.
Andrea, please take a few moments to review this article which may allow your system to be used more effectively in diverse environments.
May your days be fruitful and wisdom allowed to be used in health.
https://arxiv.org/ftp/arxiv/papers/2003/2003.10495.pdf
Graded nanocomposite metamaterials for a double-sided radiative cooling architecture with a record breaking cooling power density.
Abstract – As an emerging electricity-free cooling technology, radiative cooling employs outer space as the heat sink. With this, a sky-facing thermal emitter is usually required. Due to the blackbody radiation limit ambient temperature, the maximum cooling power density for a single-faced radiative cooling device is ~156.9W/m2. Here we report a double-sided radiative cooling architecture using graded nanocomposite metamaterials (GNM) designed for a vertically aligned thermal emitter. This GNM structure possesses an optical absorption of over 90% throughout the solar spectrum, and exceeds 90% reflection in the mid-infrared spectral region. With this configuration, both sides of a planar thermal emitter can be used to perform radiative cooling and a record cooling power density beyond 280 W/m2 was realized in a single thin-film thermal emitter. Under the standard pressure, we realized a temperature reduction of 14 C below the ambient temperature in the laboratory environment, and over 12 C in the outdoor test.
Dear Dr. Andrea Rossi,
Here a article about tha big Freeman Dyson, that now is far away, died from last 2/28/2020.
https://www.lastampa.it/scienza/2020/03/23/news/addio-a-dyson-il-fisico-che-turbava-l-universo-1.38626795
A very big thank you for your great work and working.
Best wishes,
Salvatore Boi
Dear Andrea,
How productive and useful is the work you have been doing over Skype?
Kind regards,
Frank Acland
@Rod Walton:
Where is the Rocket Ship to reach the Moon Shot ? In the Ecat SKL !!!
Rod Walton:
Thank you for the update,
Warm Regards,
A.R.
On Power Engineering issue of March 25 2020:
The Lead:
Emissions: if carbon neutral by 2050 is the Moon Shot, where is the Rocket Ship ?
Editor’s note:
Pandemic impacting utilities now in a personal way
Rod Walton
Steven N. Karels:
The answer to this is confidential.
Warm Regards,
A.R.
Dear Andrea Rossi,
“I do not understand your questions. Which atoms are you asking about?”
The discharge that you have, I assume, in the eCat SKL from which you extract useful electrical energy. Your previous demonstration had a discharge, nicknamed the ballerina, and had a discharge of light energy whose spectrum included the ultraviolet.
Does your current implementation of the eCat SKL include such light generation?
If so, then my question refers to atoms within the “ballerina” that might show spectral lines indicative of certain atoms (e.g., hydrogen, helium, lithium, etc.).
Gavino Mamia:
He,he,he…I understand your feeling, but I cannot anticipate the photo of the Ecat SKL. But you imagine a small blue cube, that’s what it will be.
Warm Regards,
A.R.