Hello Andrea!
Am I right when I think that E-catSK at a customer from 19 november 2018 is producing heat energy for about 200000 KW-hours on about one teaspoon of powder? Unbelievable!
Best regards
Nils Fryklund
Electrical output: 5.2 kW
Distribution: 92.5 % electricity, 7.5% heat, six months of performance @ 50% on/off
Size: 10 cm X 10 cm X 10 cm
Weight: 2.36 kg
Color: Sky Blue, if requested
Noise: < 45 dB
Modules per car: 4 working + 1 contingency
Modules per home: 2 operational + 2 backup
(I really really wanted to quote 10kW from 10 cm^3 @ 90% electric, but I can’t be too wanton!)
My estimate to the Ecat SKL:
cube length 101.6 mm
efficiency 81%
power 508 W
weight 780 g
I wish you all the best: stay healthy and thanks for the recommendations to fight the corona virus.
If the Ecat SKL will do well, after the corona virus tragedy the world will be twice best
Greetings from Germany,
Manfred
You posted “Drink Gin and Tonic with a slice of lemon and also Brandy. These drinks I believe helps to ward off the virus.” Since the virus is a respiratory one, I do not see how consuming alcohol will “ward off” the virus. It might make you temporarily feel better or to not care. But I doubt it has an anti-viral property. Better to maximize your immune system – by staying away from alcohol, cigarettes, etc.
Praying for your’s and your staff’s families good health through this awful pandemic.
Since a December 15, 2015 response, it appears you have maintained a “higher economy scale” strategy with a snap-together heat/electrical output ports with a ‘LEGO’-type scheme.
If so, has corrosion between the cube’s electrical connections over time proven to be a challenge?
Assuming successful test results, will you have reached the final SKL version for public demonstration and initial production? Can you estimate how long that may be? Thank you.
My SKL parameter guess:
125 Watts
87%
5x5x5 cm per side
100 grams
Gerard McEk:
The tests are proceeding well and I continue to be very optimist.
Advise taken of your move for the quest. ( He,he,he )
Warm Regards,
A.R.
Dear Andrea,
How are the tests going? Are you happy about the progress?
About the SKL details:
Max electrical Power: 100 W
85% of the total power generated by the SKL can effectively be used as electrical output power in SSM
Cube sizes: 10x10x10 cm
Weight: 800 grams
Please stay healthy, Kind regards Gerard.
Carlos from Argentina:
THANK YOU FOR YOUR REQUEST OF HELP-
ATTENTION, THIS IS AN ATTEMPT OF FRAUD !!!
WE DO NOT HAVE ANY LICENCE ON COURSE IN ARGENTINA AND WE ARE NOT SELLING ANY KIND OF SHARES OR EQUITIES.
WE PASSED THE ADDRESS YOU SENT ME TO OUR ATTORNEY FOR THE NECESSARY ACTION AGAINST THIS SUBJECT.
YOU MADE WELL: ANYBODY THAT RECEIVES SIMILAR OFFERS OF SHARES, EQUITIES, OR ECATS MUST CONTACT IMMEDIATELY US HERE OR BY EMAIL TO INFO@LEONARDOCORP1996.COM AND WE WILL IMMEDIATELY CLEAR THE SITUATION. THIS IS THE SOLE WAY TO ALLOW FRAUDSTERS TO STEAL YOUR MONEY.
DR ANDREA ROSSI, CEO OF LEONARDO CORPORATION
Dr Rossi,
I have been contacted Argentina from a person that says has a licence from you and offers me shares of his company.
Can you confirm that it is true ? I also sent you his address by email to info@leonardocorp1996
Thanks for helping,
Carlos
I propose to all the Readers a little game to have some fun in these days we have to STAY@HOME…
Try to guess the main E-CAT SKL parameters, that is:
– Electrical Power Output in Watts
– Conversion Efficiency in % (Electrical Power / Total Power)
– Cube dimensions in millimeters
– Unit weight in grams (excluding the control unit)
When the true numbers will be disclosed, everybody will be able to easily calculate his score as the sum of the absolute differences between his guess and the actual value for each of the above parameters (only one attempt is allowed per Reader).
Of course, who gets the minimum score wins! Maybe, Andrea, you could invite him to the first public product demo…
And now, my numbers:
Electrical Power: 283 W
Conversion Efficiency: 78 %
Cube Dimension: 80 mm
Unit Weight: 475 g
Eric Ashworth:
I’d refrain from suggestions not coming from the specialists, that are the physitians expert of the matter and from the directions consequently imposed or suggested by the competent Authorities.
STAY HOME !
Warm Regards,
A.R.
You posted “Nonetheless, perhaps the most emotional moment has been in 1999 in Manchester, New Hampshire, where Leonardo Corp has been born in 1996, it was March and for the first time I measured an excess of energy in the very first prototype, a very small thing, with several Watts of power.”
Can you describe the excess heat measurement methodology for that first experiment. Did you use nickel or palladium, deuterium gas or hydrogen gas? What temperatures did you reach?
Readers of the JONP, with regards the Corona virus/ Covid-19 pandemic. Go to flue virus, study Type A, Type B and Type C. This virus is a Type A flue virus, same as Spanish flue and Hong Kong flue. This Corona virus is a Chinese Type A flue. Flue vaccines are of no value with a Type A. They have to be treated as a very contagious flue that affects the respiratory system as they have occurred in the past and will continue into the future. My suggestion is the same as that of a British medical doctor that contracted the virus which is isolate one self, eat chicken soup, take paracetamol and stay in bed. Myself even though I do not have the virus I wash my hands, use alcohol to sterilize my hands, Drink Gin and Tonic with a slice of lemon and also Brandy. These drinks I believe helps to ward off the virus. As of today I feel fine. Stay safe, don’t panic it will pass as it always does. Obviously the elderly and those with a compromised immune system must take every precaution possible. Regards Eric Ashworth
Mark U:
All of them are my sons, but , as Ferrari used to say about his cars, “the best is always the next”. As a consequense of this consideration, the best is the SKL, albeit each of them has gratified our Team with a strong emotion. But now we are completely absorbed by the SKL, that I consider our masterpiece.
Nonetheless, perhaps the most emotional moment has been in 1999 in Manchester, New Hampshire, where Leonardo Corp has been born in 1996, it was March and for the first time I measured an excess of energy in the very first prototype, a very small thing, with several Watts of power. That has been the beginning.
About the dicotomy between the comment – answer to Kory, the answer is YES, the no was a typo that probably has been corrected later also on http://www.rossilivecat.com
Thank you for having posted !
Warm Regards
A.R.
I’m curious: which of your Ecat developments (hot Cat, QuarkX, EcatSK, EcatSKL ) have been the most gratifying to you, while you were working on them?
Also, and if you are inclined, could you summarize in a few words what you have felt for each one of your Ecat iterations?
You mentioned in a recent post about Thomas Florek’s music in http://www.ecatskdemo.com
Personally I was quite delighted by the music and light humorous touch of the EcatSK video. Also, seeing the Ballerina was the highlight of the last demo for me. I look forward to your demonstration of the EcatSK Leonardo and hope your voice has recovered well.
Cheers from Canada
PS I am a new poster and up until today I have only read your blog at rossilivecat.com . Now that I see the posts here on journal-of-nuclear-physics.com , I notice that your answer to Kory earlier today appeared as “No” on rossilivecat.com, but “Yes” on journal-of-nuclear-physics.com !
Assuming use of Faraday shielding and active cooling, is there any limitation on how close individual E-Cat SKL’s can be positioned in relation to each other?
Gian:
Thank you for your kind sustain and allow me to sustain you: WE WILL WIN !
Just stay home with your family and respect rigorously the directions of your Government.
About music: isn’t delighting the music of my friend Thomas Florek in the menu of http://www.ecatskdemo.com
Warm Regards,
A.R.
Grazie Andrea;
non mi attendevo notizie migliori di queste.
In un giorno di grande depressione mi sento molto più sollevato.
Per consolare la tua Signora falla vincere con le carte da gioco (se trovi il tempo)…
Grazie e ancora grazie. Ti consoli il pensiero che tanti ti sono, almeno spiritualmente,vicini.
Nella depressione ascolto su youtube Vivaldi, Zipoli, Sammartini, … e Morricone.
Consiglio : di Vivaldi il Credo dell’orchestra Armena,il Dixit Dominus del Ghislieri Consort di Pavia, di Zipoli L’elevazione.
E poi c’è tanto jazz… Brinderemo in tempi migliori.
Warm Regards.
Gian
Dear Andrea,
you are submitting your latest version of the Ecat system to the teams of third-party verifiers:
an energy generator size 10x10x10 cm, connected to its power supply and control system the size of a pack of cigarettes.
There are at least tree teams of verifiers:
one of them paid by Leonardo,
one in charge of official verification,
one or more than one in charge of your possible customers.
I assume that all teams are able to see and follow the entire instrumentation prepared by you to check all the parameters necessary for the validation of the test.
1 Can they also continuously record the measured physical quantities?
2 Can any stages in SSM be appreciated in size and duration?
3 Have SSM phases already been achieved to date?
Thank you if you can and want to respond to these requests of mine. Any answers will be a pleasant support in this sad period of forced isolation.
4 Last but not least question: did you have the comfort of still letting yourself be gracefully beaten by your Lady in your tennis battles?
Am I indiscreet if I ask you for the last score?
Waiting for better times, my warmest greetings and best wishes
Gian
With respect to the COVID-19 pandemic, we know a few things:
1. It is highly contagious – it passes within 6 feet by air; or by touching a virus laden object and then we touch our face.
2. Of the people who become infected, about 80% do not require hospitalization
3. Of the 20% that require hospitalization, about 5% will require ICU support
4. Those that require ICU support, about 1/2 will survive to be later released
5. This assumes adequate hospital resources are available, otherwise, mortality rates will increase.
The adequate hospital resources depend on not too many patients being in the medical system at any one time. The “flattening the curve” is done to stretch out the number of patients requiring hospital care at any one time.
This can be achieved by:
a. increasing hospital capabilities (more doctors, nurses, equipment, beds, supplies. etc.)
b. Decreasing the number of infected persons at any one time (stay at home, 6 feet separation, washing hands, etc.)
c. Improving the uninfected person’s natural resistance (lose weight, stop consuming alcohol, stop smoking, better diet, sleep more, etc.) So even though they become infected, they do not require hospitalization.
COVID-19 starts out with the infection of a previously uninfected person. It appears previously infected persons are immune to subsequent infections. So the use of social distancing and stay-at-home requirements attempt to reduce the number of new infections per unit of time.
The hospital capacity is augmented by adding hospitals, beds, supporting equipment, personnel, and by keeping support personnel from becoming infected. But this is limited in its ability to increase quickly – only so many doctors and nurses, even assuming infinite building and supply capabilities.
Still, 20% of those infected will require hospitalization – unless, an improvement in the average person’s immune system is accomplished. Say, only 18% of those infected will require hospitalization? Perhaps 2% more might be able to fight off the infection without hospitalization because of an improved immune system?
As you are often fond of saying, “the solution requires an integrated approach”.
Social rules, increased hospital capacity, and optimization of the immunity of uninfected persons. All three, in my opinion, need to be addressed to effectively combat the disease.
Eventually, as more people become infected and therefore immune, and the supply of uninfected persons decreases, the COVID-19 virus will fade away. Hopefully, permanently – like SARS. Otherwise, it might mutate like the flu and begin again. Time will tell. Hopefully, a vaccination will become available and widely employed before a new season comes.
So home remedies, as long as they are not harmful, could be tried, given that there is no medically available alternative at this time. A vaccine is months away. Some drugs may be available to treat those requiring hospitalization but they have not yet been tested for being both safe and effective. So, for now, all three methods should be applied. Stay home (isolate); optimize your immune system; and for each society to improve its hospital capacity to handle “peak loading”.
In a “perfect world”, we would all self-isolate for 15 or 30 days, the virus would find no uninfected persons and it would die out. It cannot live for long outside a human host. But we do not live in such a world. Humans disobey and they make poor choices. Working together, we can all get through this.
Sorry for the lack of clarity, I was thinking along the route of increasing the power level, not with respect to what places a limit on the output lifespan.
Do any of the scenarios I list in the previous post limit the ability to increase the existing electrical output of an E-Cat SKL to a higher output level?
Is the electrical output of the E-Cat SKL currently limited by;
A. The production of energy in the charge.
B. As yet limited understanding of the science involved in the conversion of energy produced in the charge to electricity.
C. The Science is known, but insufficient length of testing to provide statistically accurate empirical parameters for the control software or accurate redesign of the mechanism.
D. The technology / tools available to manufacture the mechanism that converts the energy to electricity, i.e. machine manufacture vs. hand built.
E. The shape or size of materials available on the market, to design the mechanism that converts the energy to electricity.
F. Limitation of properties of available materials.
G. Some combination of above.
H. One or more other constraints.
I think refining the items above to the most efficient state will provide many years of work for a large number of researchers.
Steven N. Karels:
Nobody knows now what can be useful and what is not to fight against this corona f…… virus: the sole things I am sure will work are:
1- maintain at least 1.5 meters ( 5 ft ) from any other person when you are out of home
2- wear a mask, eyeglasses, hat and gloves always when out of home
3- stay home, unless you have authorizations for specific reasons, or when you need to buy foods or medicines
About all the rest, I do not know, while we all are waiting for a vaccine.
Warm Regards,
A.R.
Dear Readers:
Today has been published on the Journal of Nuclear Physics the paper in four parts
“On the Unification of Forces”, by Rosemarie Ainslie
Warm Regards,
A.R.
Dr Rossi,
Can you give us a definition of Energy coherent with the experiments you are making with the Ecat SKL during this period, after more than ten years of experience with the Ecats ?
Buon giorno a tutti.
Se Ecat SKL potrà finalmente entrare in produzione, oltre a dare una mano
all’ambiente, sarà di grande sollievo anche per l’economia mondiale distrutta da
i lockdown dichiarati in queste settimane delle varie nazioni.
Un Ecat SKL in ogni casa/capanna, sarà certamente il motore economico mondiale
dei prossimi anni….
MAI PERIODO E’ STATO PIU’ IDONEO PER ENTRARE SUL MERCATO MONDIALE.
FORZA E CORAGGIO
KeithT:
Thank you,
data taken,
Warm Regards,
A.R.
Chuck Davis:
Thank you, data taken,
Warm Regards,
A.R.
Brokeeper:
Corrosion should not be an issue
I prefer not to set times so far.
Data taken: thanks,
Warm Regards,
A.R.
Manfred:
Thanks for your participation to the quest,
Warm Regards,
A.R.
LilyLover:
Thank you for your participation to the quest,
Warm Regards,
A.R.
Dear Andrea, fellow guessers,
This is what I have in mind :
Module :
————————————————————-
Volume : 5cm * 5cm * 5cm = 125cm³ / module
Power : 1 kW / module –> 8 modules / dm³ –> 8 kW/dm³
Weight : 100g / module –> 8 modules / dm³ –> 800g/dm³
Ee/Et ratio : 90% / 10%
Controller :
————————————————————-
90mm / 60mm / 20mm, weight 50g (approx. like a raspberry pi)
+ 200g for enclosure & interfacing HW to the module(s)
Best Regards,
Xavier Pitz
Hello Andrea!
Am I right when I think that E-catSK at a customer from 19 november 2018 is producing heat energy for about 200000 KW-hours on about one teaspoon of powder? Unbelievable!
Best regards
Nils Fryklund
Entree 3: Guessing Game
Electrical output: 5.2 kW
Distribution: 92.5 % electricity, 7.5% heat, six months of performance @ 50% on/off
Size: 10 cm X 10 cm X 10 cm
Weight: 2.36 kg
Color: Sky Blue, if requested
Noise: < 45 dB
Modules per car: 4 working + 1 contingency
Modules per home: 2 operational + 2 backup
(I really really wanted to quote 10kW from 10 cm^3 @ 90% electric, but I can’t be too wanton!)
My estimate to the Ecat SKL:
cube length 101.6 mm
efficiency 81%
power 508 W
weight 780 g
I wish you all the best: stay healthy and thanks for the recommendations to fight the corona virus.
If the Ecat SKL will do well, after the corona virus tragedy the world will be twice best
Greetings from Germany,
Manfred
Eric Ashworth,
You posted “Drink Gin and Tonic with a slice of lemon and also Brandy. These drinks I believe helps to ward off the virus.” Since the virus is a respiratory one, I do not see how consuming alcohol will “ward off” the virus. It might make you temporarily feel better or to not care. But I doubt it has an anti-viral property. Better to maximize your immune system – by staying away from alcohol, cigarettes, etc.
Dear Andrea,
Praying for your’s and your staff’s families good health through this awful pandemic.
Since a December 15, 2015 response, it appears you have maintained a “higher economy scale” strategy with a snap-together heat/electrical output ports with a ‘LEGO’-type scheme.
If so, has corrosion between the cube’s electrical connections over time proven to be a challenge?
Assuming successful test results, will you have reached the final SKL version for public demonstration and initial production? Can you estimate how long that may be? Thank you.
My SKL parameter guess:
125 Watts
87%
5x5x5 cm per side
100 grams
With much respect,
Brokeeper
Dear Andrea, My numbers: Pe = 16 kW, Efficiency = 75%, Dimensions = 10 cm, Weight = 100 g
Warm regards,
Chuck Davis
Dear Andrea,
My numbers for E-Cat SKL parameters;
Electrical Power: 500 W
Conversion Efficiency: 88 %
Cube Dimension: 60 mm a side
Unit Weight: 100 g
Colour: Blue
Regards,
Keith Thomson.
Dear Andrea Rossi,
My guess for the SKL data:
Electric power: 875 W
Conversion factor: 84%
Cube size: 125 mm/side
Cube weight: 107 g
Kind regards
Sven B
Gerard McEk:
The tests are proceeding well and I continue to be very optimist.
Advise taken of your move for the quest. ( He,he,he )
Warm Regards,
A.R.
Dear Andrea,
How are the tests going? Are you happy about the progress?
About the SKL details:
Max electrical Power: 100 W
85% of the total power generated by the SKL can effectively be used as electrical output power in SSM
Cube sizes: 10x10x10 cm
Weight: 800 grams
Please stay healthy, Kind regards Gerard.
Carlos from Argentina:
THANK YOU FOR YOUR REQUEST OF HELP-
ATTENTION, THIS IS AN ATTEMPT OF FRAUD !!!
WE DO NOT HAVE ANY LICENCE ON COURSE IN ARGENTINA AND WE ARE NOT SELLING ANY KIND OF SHARES OR EQUITIES.
WE PASSED THE ADDRESS YOU SENT ME TO OUR ATTORNEY FOR THE NECESSARY ACTION AGAINST THIS SUBJECT.
YOU MADE WELL: ANYBODY THAT RECEIVES SIMILAR OFFERS OF SHARES, EQUITIES, OR ECATS MUST CONTACT IMMEDIATELY US HERE OR BY EMAIL TO INFO@LEONARDOCORP1996.COM AND WE WILL IMMEDIATELY CLEAR THE SITUATION. THIS IS THE SOLE WAY TO ALLOW FRAUDSTERS TO STEAL YOUR MONEY.
DR ANDREA ROSSI, CEO OF LEONARDO CORPORATION
Rick 57:
OK, the game is on !
Warm Regards,
A.R.
Dr Rossi,
I have been contacted Argentina from a person that says has a licence from you and offers me shares of his company.
Can you confirm that it is true ? I also sent you his address by email to info@leonardocorp1996
Thanks for helping,
Carlos
Dear Andrea,
I propose to all the Readers a little game to have some fun in these days we have to STAY@HOME…
Try to guess the main E-CAT SKL parameters, that is:
– Electrical Power Output in Watts
– Conversion Efficiency in % (Electrical Power / Total Power)
– Cube dimensions in millimeters
– Unit weight in grams (excluding the control unit)
When the true numbers will be disclosed, everybody will be able to easily calculate his score as the sum of the absolute differences between his guess and the actual value for each of the above parameters (only one attempt is allowed per Reader).
Of course, who gets the minimum score wins! Maybe, Andrea, you could invite him to the first public product demo…
And now, my numbers:
Electrical Power: 283 W
Conversion Efficiency: 78 %
Cube Dimension: 80 mm
Unit Weight: 475 g
Thanks a lot for your attention and good luck !
Riccardo
Eric Ashworth:
I’d refrain from suggestions not coming from the specialists, that are the physitians expert of the matter and from the directions consequently imposed or suggested by the competent Authorities.
STAY HOME !
Warm Regards,
A.R.
Steven N. Karels:
The structure of that prototype is contained in the patent of this post.
Warm Regards,
A.R.
Dear Andrea Rossi,
You posted “Nonetheless, perhaps the most emotional moment has been in 1999 in Manchester, New Hampshire, where Leonardo Corp has been born in 1996, it was March and for the first time I measured an excess of energy in the very first prototype, a very small thing, with several Watts of power.”
Can you describe the excess heat measurement methodology for that first experiment. Did you use nickel or palladium, deuterium gas or hydrogen gas? What temperatures did you reach?
Readers of the JONP, with regards the Corona virus/ Covid-19 pandemic. Go to flue virus, study Type A, Type B and Type C. This virus is a Type A flue virus, same as Spanish flue and Hong Kong flue. This Corona virus is a Chinese Type A flue. Flue vaccines are of no value with a Type A. They have to be treated as a very contagious flue that affects the respiratory system as they have occurred in the past and will continue into the future. My suggestion is the same as that of a British medical doctor that contracted the virus which is isolate one self, eat chicken soup, take paracetamol and stay in bed. Myself even though I do not have the virus I wash my hands, use alcohol to sterilize my hands, Drink Gin and Tonic with a slice of lemon and also Brandy. These drinks I believe helps to ward off the virus. As of today I feel fine. Stay safe, don’t panic it will pass as it always does. Obviously the elderly and those with a compromised immune system must take every precaution possible. Regards Eric Ashworth
KeithT:
No.
Warm Regards,
A.R.
Mark U:
All of them are my sons, but , as Ferrari used to say about his cars, “the best is always the next”. As a consequense of this consideration, the best is the SKL, albeit each of them has gratified our Team with a strong emotion. But now we are completely absorbed by the SKL, that I consider our masterpiece.
Nonetheless, perhaps the most emotional moment has been in 1999 in Manchester, New Hampshire, where Leonardo Corp has been born in 1996, it was March and for the first time I measured an excess of energy in the very first prototype, a very small thing, with several Watts of power. That has been the beginning.
About the dicotomy between the comment – answer to Kory, the answer is YES, the no was a typo that probably has been corrected later also on
http://www.rossilivecat.com
Thank you for having posted !
Warm Regards
A.R.
Dear Andrea,
I’m curious: which of your Ecat developments (hot Cat, QuarkX, EcatSK, EcatSKL ) have been the most gratifying to you, while you were working on them?
Also, and if you are inclined, could you summarize in a few words what you have felt for each one of your Ecat iterations?
You mentioned in a recent post about Thomas Florek’s music in
http://www.ecatskdemo.com
Personally I was quite delighted by the music and light humorous touch of the EcatSK video. Also, seeing the Ballerina was the highlight of the last demo for me. I look forward to your demonstration of the EcatSK Leonardo and hope your voice has recovered well.
Cheers from Canada
PS I am a new poster and up until today I have only read your blog at rossilivecat.com . Now that I see the posts here on journal-of-nuclear-physics.com , I notice that your answer to Kory earlier today appeared as “No” on rossilivecat.com, but “Yes” on journal-of-nuclear-physics.com !
Dear Andrea,
Assuming use of Faraday shielding and active cooling, is there any limitation on how close individual E-Cat SKL’s can be positioned in relation to each other?
Regards,
Keith Thomson
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today in other posts of this blog,
Warm Regards,
A.R.
Kory:
Yes
Warm Regards,
A.R.
Talking of
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
do you think the ZBV is increased by the voltage ?
Gian:
Thank you for your kind sustain and allow me to sustain you: WE WILL WIN !
Just stay home with your family and respect rigorously the directions of your Government.
About music: isn’t delighting the music of my friend Thomas Florek in the menu of
http://www.ecatskdemo.com
Warm Regards,
A.R.
Grazie Andrea;
non mi attendevo notizie migliori di queste.
In un giorno di grande depressione mi sento molto più sollevato.
Per consolare la tua Signora falla vincere con le carte da gioco (se trovi il tempo)…
Grazie e ancora grazie. Ti consoli il pensiero che tanti ti sono, almeno spiritualmente,vicini.
Nella depressione ascolto su youtube Vivaldi, Zipoli, Sammartini, … e Morricone.
Consiglio : di Vivaldi il Credo dell’orchestra Armena,il Dixit Dominus del Ghislieri Consort di Pavia, di Zipoli L’elevazione.
E poi c’è tanto jazz… Brinderemo in tempi migliori.
Warm Regards.
Gian
Gian:
1 yes
2 yes
3 yes
4 due to corona virus, Wimbledon and Rossi vs Wife have been delayed , as well as the Olympic Games.
Warm Regards,
A.R.
Dear Andrea,
you are submitting your latest version of the Ecat system to the teams of third-party verifiers:
an energy generator size 10x10x10 cm, connected to its power supply and control system the size of a pack of cigarettes.
There are at least tree teams of verifiers:
one of them paid by Leonardo,
one in charge of official verification,
one or more than one in charge of your possible customers.
I assume that all teams are able to see and follow the entire instrumentation prepared by you to check all the parameters necessary for the validation of the test.
1 Can they also continuously record the measured physical quantities?
2 Can any stages in SSM be appreciated in size and duration?
3 Have SSM phases already been achieved to date?
Thank you if you can and want to respond to these requests of mine. Any answers will be a pleasant support in this sad period of forced isolation.
4 Last but not least question: did you have the comfort of still letting yourself be gracefully beaten by your Lady in your tennis battles?
Am I indiscreet if I ask you for the last score?
Waiting for better times, my warmest greetings and best wishes
Gian
KeithT:
Thank you for the clarification.
Answer:
No,
Warm Regards,
A.R.
Steven N. Karels:
Thank you for your insight,
Warm Regards,
A.R.
Dear Andrea Rossi,
With respect to the COVID-19 pandemic, we know a few things:
1. It is highly contagious – it passes within 6 feet by air; or by touching a virus laden object and then we touch our face.
2. Of the people who become infected, about 80% do not require hospitalization
3. Of the 20% that require hospitalization, about 5% will require ICU support
4. Those that require ICU support, about 1/2 will survive to be later released
5. This assumes adequate hospital resources are available, otherwise, mortality rates will increase.
The adequate hospital resources depend on not too many patients being in the medical system at any one time. The “flattening the curve” is done to stretch out the number of patients requiring hospital care at any one time.
This can be achieved by:
a. increasing hospital capabilities (more doctors, nurses, equipment, beds, supplies. etc.)
b. Decreasing the number of infected persons at any one time (stay at home, 6 feet separation, washing hands, etc.)
c. Improving the uninfected person’s natural resistance (lose weight, stop consuming alcohol, stop smoking, better diet, sleep more, etc.) So even though they become infected, they do not require hospitalization.
COVID-19 starts out with the infection of a previously uninfected person. It appears previously infected persons are immune to subsequent infections. So the use of social distancing and stay-at-home requirements attempt to reduce the number of new infections per unit of time.
The hospital capacity is augmented by adding hospitals, beds, supporting equipment, personnel, and by keeping support personnel from becoming infected. But this is limited in its ability to increase quickly – only so many doctors and nurses, even assuming infinite building and supply capabilities.
Still, 20% of those infected will require hospitalization – unless, an improvement in the average person’s immune system is accomplished. Say, only 18% of those infected will require hospitalization? Perhaps 2% more might be able to fight off the infection without hospitalization because of an improved immune system?
As you are often fond of saying, “the solution requires an integrated approach”.
Social rules, increased hospital capacity, and optimization of the immunity of uninfected persons. All three, in my opinion, need to be addressed to effectively combat the disease.
Eventually, as more people become infected and therefore immune, and the supply of uninfected persons decreases, the COVID-19 virus will fade away. Hopefully, permanently – like SARS. Otherwise, it might mutate like the flu and begin again. Time will tell. Hopefully, a vaccination will become available and widely employed before a new season comes.
So home remedies, as long as they are not harmful, could be tried, given that there is no medically available alternative at this time. A vaccine is months away. Some drugs may be available to treat those requiring hospitalization but they have not yet been tested for being both safe and effective. So, for now, all three methods should be applied. Stay home (isolate); optimize your immune system; and for each society to improve its hospital capacity to handle “peak loading”.
In a “perfect world”, we would all self-isolate for 15 or 30 days, the virus would find no uninfected persons and it would die out. It cannot live for long outside a human host. But we do not live in such a world. Humans disobey and they make poor choices. Working together, we can all get through this.
Dear Andrea,
Sorry for the lack of clarity, I was thinking along the route of increasing the power level, not with respect to what places a limit on the output lifespan.
Do any of the scenarios I list in the previous post limit the ability to increase the existing electrical output of an E-Cat SKL to a higher output level?
Regards,
Keith Thomson.
KeithT:
What do you mean with “limited electrical output” ? Limited respect what ?
Warm Regards,
A.R.
Dear Andrea,
Is the electrical output of the E-Cat SKL currently limited by;
A. The production of energy in the charge.
B. As yet limited understanding of the science involved in the conversion of energy produced in the charge to electricity.
C. The Science is known, but insufficient length of testing to provide statistically accurate empirical parameters for the control software or accurate redesign of the mechanism.
D. The technology / tools available to manufacture the mechanism that converts the energy to electricity, i.e. machine manufacture vs. hand built.
E. The shape or size of materials available on the market, to design the mechanism that converts the energy to electricity.
F. Limitation of properties of available materials.
G. Some combination of above.
H. One or more other constraints.
I think refining the items above to the most efficient state will provide many years of work for a large number of researchers.
Regards,
Keith Thomson.
Buck:
We all strongly appreciate your wishes and wish you the same !
Warm Regards,
A.R.
Dear Andrea,
this is a simple wish to you, your team, the team of the testing agency, as well as all the clients who have their own team members present:
Stay well, be healthy.
Respectfully,
Mason
Steven N. Karels:
Nobody knows now what can be useful and what is not to fight against this corona f…… virus: the sole things I am sure will work are:
1- maintain at least 1.5 meters ( 5 ft ) from any other person when you are out of home
2- wear a mask, eyeglasses, hat and gloves always when out of home
3- stay home, unless you have authorizations for specific reasons, or when you need to buy foods or medicines
About all the rest, I do not know, while we all are waiting for a vaccine.
Warm Regards,
A.R.
Gian Luca:
Thank you for your sustain,
Warm Regards,
A.R.
Dear Readers:
Today has been published on the Journal of Nuclear Physics the paper in four parts
“On the Unification of Forces”, by Rosemarie Ainslie
Warm Regards,
A.R.
C.S.:
Energy = Density of Information in the Space-Time
Warm Regards,
A.R.
Dr Rossi,
Can you give us a definition of Energy coherent with the experiments you are making with the Ecat SKL during this period, after more than ten years of experience with the Ecats ?
Buon giorno a tutti.
Se Ecat SKL potrà finalmente entrare in produzione, oltre a dare una mano
all’ambiente, sarà di grande sollievo anche per l’economia mondiale distrutta da
i lockdown dichiarati in queste settimane delle varie nazioni.
Un Ecat SKL in ogni casa/capanna, sarà certamente il motore economico mondiale
dei prossimi anni….
MAI PERIODO E’ STATO PIU’ IDONEO PER ENTRARE SUL MERCATO MONDIALE.
FORZA E CORAGGIO
Dear Andrea Rossi,
I read an online blog from a medical doctor about what can be done to optimize our immune system – and inexpensively
Finnish saunas or Japanese baths. The sequence of hot and cold exposure (within limits) increases the body’s production of certain antibody cells.
Sounds like a way to relax after a long day of eCat research?
Reference: YouTube Coronavirus medcram Updates 46 & 47.