United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

40,385 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    John C. Evans:
    Thank you, data taken note of.
    Warm Regards,
    A.T.

  • Andrea Rossi

    KeithT:
    We are doing it now.
    Warm Regards,
    A.R.

  • KeithT

    Dear Andrea,

    Has there been any attempt as yet of connecting two or more E-Cat SKL’s to add their electrical outputs together?

    Regards,

    Keith Thomson

  • John C Evans

    Dear Andrea

    My guesses, and my email in case I get lucky jcerockwood@gmail.com

    – Electrical Power 145Watts
    – Conversion Efficiency in 87%
    – Cube dimensions in millimeters 120x120x120
    – Unit weight in grams (excluding the control unit) 1728grams

    Thanks

    John Evans

  • Frank Acland

    Dear Andrea,

    Do you continue to do Skype collaboration with the third party testers? Or is that phase over?

    Best wishes,

    Frank Acland

  • Andrea Rossi

    Rod Walton:
    Thank you for the update,
    Warm Regards,
    A.R.

  • Rod Walton

    On Power Engineering issue of April 7 2020:
    Complications from pandemic may force delay to VOGTE 3 and 4 nuclear expansion
    Rod Walton

  • Andrea Rossi

    Dear Readers:
    About the quest on course, I recommend that you put a real email address in the comment containing the data you propose, because the invitation to the winner will be sent to the email address you put in the comment.
    Warmest Regards,
    A.R.

  • Andrea Rossi

    Dr R. Nicholson:
    I am perfectly healthy and I am working hard on the Ecat SKL.
    Thank you for your concern,
    Warm Regards,
    A.R.

  • Dr. R. Nicholson

    Good day Mr. Rossi

    Me and my affiliates are wondering, if You are healthy

    Best whishes

    Roger

  • Andrea Rossi

    Prof:
    I am not able to answer.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Mark U:
    Thank you for your sustain !
    Data taken,
    Warm Regards,
    A.R.

  • Prof

    Dear Dr Andrea Rossi,
    Do you think that the corona virus anomalies respect the normal flu viruses can be caused by the global warming and other environmental damages caused by human activity, as somebody is supposing ?

  • Andrea Rossi

    Silent Majority Guy:
    Thank you for your kind sustain to our Team,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Claud:
    Thank you, data taken,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Sven B:
    1 yes
    2 no
    Warm Regards,
    A.R.

  • Sven B

    Dear Andrea Rossi,

    Several times you confirmed that you were
    preparing to use ABB robots in the manufacturing of E-Cat modules.
    1. Is this still the plan?
    2. If Yes, did you already test to make an E-Cat SKL module with the help of a robot?

    Kind Regards
    Sven B

  • Silent Majority Guy

    Dr Rossi,
    Thank you for being always working for us, whatever happened: hurricanes, virus, whatever.
    What you are doing is important for us all,
    Silent Majority Guy

  • Claud

    Hi Andrea, here are my prediction of the SKL features:
    output: 160 W
    conv. efficiency : 71%
    dimension :98 x 98 x 98 mm
    weight : 480 g.
    Good luck to you and to me 🙂

  • Mark U

    Dear Andrea,

    Thank you for sharing some of the history of your Ecat progression. I can understand that your first production of excess energy in March of 1999 in Manchester, New Hampshire was especially emotional. The first kiss is not forgotten, nor the details around the birth of one’s first child. Also, fittingly, March 1999 would have been the ten year anniversary of the announcement by Drs. Pons and Fleischmann.

    Thank you again for your perseverance and inspiration and perspiration in the quest for clean energy!
    Cheers from Canada

    My guess for the EcatSKL properties at the upcoming demo:

    Total power out: 175W
    Electrical conversion efficiency: 80%
    Electrical power out: 175W * .8 = 140W
    Dimension: Cube with side length of 8 cm
    Mass: 400 grams, including wafer charge.
    Colour: blue
    Electrical power in, when required: 10W.

  • Aleksei Savchenko

    Dear Readers. Lets make a brief scientific analysis of ECat SKL cube. In comparison with well known previous thermal ECats versions (thanks Andrea later repeated in many countries), novel device produced also electricity. We don’t know much about its prototype ECat SK, only about its very small dimensions (like tube) and 100W produced electricity (if my memory doesn’t
    fail me). Therefore, Andrea Rossi with his team moved away from his standard scheme of obtaining energy with AlLiH -Ni powder fuel.
    Novel design can be implemented using Shoulders and others electromagnetic effects. This device is not need large sizes as the main part is the electrical contacts between which plasma is created and external winding for removing electricity. Plasma itself has low heat capacity in comparison with AlLiH Ni fuel and cooling system can be minimized. Moreover, generated photons can be focused by mirrows and send to solar battery for obtaining additional electricity.
    Of course, the excess of energy that partly transforms to electricity needs hydrogen in the system, saturated in Ni or in other way inside the system. Better to use nanostructured Ni as electrodes.
    All these parts should be inside sealed container to avoid hydrogen to escape.
    In general it is the main parts in the box since electric converter may be placed in the control block cigarette pack.
    As usual control system is one third of the main part (dimentions).
    Much electricity production needs more complicated cooling system, for example Rank tube, so the electricity power is not large (100_200W) as well as conversion efficiency ( not more than in electric power statioms) as it is thefirst step of developments.
    The cube or similar form is not heavy.
    That is all fot the first approximation.
    I believe my fantasy will give Rossi team a reason for humor
    In a few days I will give additional information on improving this design using my rich imagination. I hope I haven’t confused you all.
    Best regards and good luck.
    Aleksei

  • Andrea Rossi

    Raffaele Bongo:
    No, it is not possible to insert more than one Ecat SKL in that volume.
    Warm Regards,
    A.R.

  • Andrea Rossi

    KeithT:
    The voltage can be adjusted making it fit for the necessity of the Client
    Warm Regards,
    A.R.

  • Andrea Rossi

    E. Hergen:
    I think so.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Mason:
    Thank you for your kind wishes.
    Taken notice of your data,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Chuck Davis:
    Do you have a cristall ball ? Is it for sale ?
    Warm Regards,
    A.R.

  • Chuck Davis

    Dear Andrea, Since we are into speculation, I predict that the ecat will be certified by no later than June 01, 2020!

    Warm regards,
    Chuck Davis

  • Mason

    Dear Andrea,

    this is a simple wish to you, your team, the team of the testing agency, as well as all the clients who have their own team members present:

    Stay well, be healthy.

    Respectfully,
    Mason

    ps. My guess:

    – Electrical Power Output: 1 kiloWatt
    – Conversion Efficiency: 85%
    – Dimensions: 90x90x90 mm
    – Unit weight (excluding the control unit): 95 grams

  • E. Hergen

    Dear Mr. Rossi,

    you said, that your team is still testing different configuations of the e-cat skl. Do you already have a configuration, which is “good enough” for commercialisation?

    Kind regards,

    E.Hergen

  • KeithT

    Dear Andrea,

    Is the E-Cat SKL electrical output voltage determined by design, i.e. a specific voltage can be chosen, or is the output voltage determined by the function of the charge energy to electrical output extraction mechanism?

    Regards,

    Keith Thomson

  • Raffaele Bongo

    Hello A. Rossi
    Small positive remark in these difficult times: Air pollution fell sharply in cities. This is a very good sign for our future with cars powered by an E-Cat SKL and houses without chimneys.
    Can you specify if you can accommodate several SKL reactors in the 10 cm cube side?
    Good health to you, your team and your supporters.
    Best regards
    Raffaele

  • Andrea Rossi

    Buck:
    You did not understand my comments. I am talking of definition of Energy in general, not of measurements of the energy consumed and the energy generated by the Ecat ! The theoretical concept of the definition of Energy is one thing, the measurement of Wh consumed and generated by an apparatus are a totally different issue. You correctly cite the Dunning Kruger Effect, but your text gives evidence that such psychological effect is referred to you: the matter of the fact is that you really have not been able to understand what I wrote while, along the Dunning Kruger Effect, at the same time you are not able to recognize this and introject in others your different way to be intelligent.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Aleksei Savchenko
    The winner of this quest will be invited to the presentation, but you already have been invited, as a Russian scientist I esteem. So I see you more as a support of our Readers that participate to this quest: maybe they can ask you suggestions or help: this would be suicy !
    Obviously you are more than free to send your data, but independently from them you will be anyway invited to attend the presentation.
    Second suggestion: even if you are in a less populated countryside, please do not lower the guard: stay home ! Use all the individual protection devices and follow all the direction of the Government, don’t brave this virus: it is extremely dangerous.
    Answers:
    1. the “cigarette pack” ( the control system ) is separated
    2.the Ecat SKL is still the same, we are just continuing to change configurations of the same object, same components: the confuguration is extremely important
    3. Ha,ha,ha !
    No, the members of our Team are not participating to the quest: you have my honour word: that would be very unfair to our beloved Readers ! Frank Acland is the director of the best blog of the LENR sector, but he is not and has never been a member of our Team, besides, all the information I gave and give him is immediately published on E-Catworld, so all the Readers of the JoNP have access to the same information, just reading http://www.e-catworld.com as most of them already do.
    I envy your dacha in the countryside of Moscow: you surely can make cross country skiing there, which is my passion
    4. Very well, as I suggested, you anticipated me and already are giving good suggestions to our Readers that make this competition.
    Enjoy Easter in your winter paradise !
    Warm Regards,
    A.R.

  • Buck

    THx for the quick reply.

    Now it is clear, how You measure netto win.

    Your conclusions of Yur measurement are based on a very common effect, which is called “Dunning Kruger Effect”.

    You can read about it.

    Regards

    Buck

  • Andrea Rossi

    CC:
    Thank you for your wishes, and I send to you and to all our Readers my most sincere wishes to spend a Happy Easter 2020, notwithstanding the necessity to stay at home: I am sure you all will feel the Spirit of the Resurrection.
    Andrea Rossi

  • Andrea Rossi

    Sam:
    He,hee,he…right ! And thank you for the nice link,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ivan Samec:
    Thank you for your participation: data taken
    Warm Regards,
    A.R.

  • Andrea Rossi

    Buck:
    Yes,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stephen:
    Thank you for your delighting comment: we really need smiles in this difficult period of pandemy.
    Warm Regards,
    A.R.

  • Stephen

    Dear Andrea. I really like reading these guesses the parameters of the Ecat SKL. You start at the beginning and read each one and by the end you can’t help smiling. Isn’t that something to treasure in these days.

    I’d be happy with almost any one of these. And if any of those is correct how amazing that will be!

    I can’t my self wager a guess. I like to guess how it could be sometimes to understand it’s potential. But in this I like to keep it in mind as a work if art as well as science and engineering that evolves and surprises us until the day it comes to view.

    However all these guesses give such hope and optimism in these days I love to read them. I really feel wonder and hope at what I see there.

  • Buck

    Hi, Mr. Rossi.

    You said, that Your reference of measuring energy is “amount of information per unit space time”.

    Do You reference both directions ( input and output ) with the same definition of energy ?

    Regards

    Buck

  • Ivan Samec

    Dear participants in guessing,

    my guess:

    – Electrical Power Output: 195 Watts
    – Conversion Efficiency: 84%
    – Dimensions: 80x80x70 mm
    – Unit weight (excluding the control unit): 97 gramms

  • Aleksei Savchenko

    Dear Rick 57, dear Andrea,
    Thank you for opportunity to start a game (quest) especially it is very cold in Moscow country forest, where I am now living having escaped from the corona virus city carantine to feel free.
    Before starting the game some input data should be precised.
    1. First, are the ECat SKL parameters include controller (a pack of cigarettes) inserted inside or only separate arrangement?
    2. Second, ECat SKL announced in January is continiously improving. What version we are going to determine – January, current one or future will be shown at your presentation?.
    3. Third, we are all in unequal conditions as among the Readers are the members of Andrea Rossi team, Frank Acland, for example, knowing parameters of your device (may be). His questions were composed in such a way that Andrea could somehow inadvertently convey the necessary information to us.
    If he win he can make some kind of bisiness to sell to extra invitation (the first one he will recieve as a member of the team).
    In order not to freeze at my country dacha I will also take part in the competition (although I have already invitation- Andrea promised).
    4. To everybody. There are two approaches to the parameters of ECat SKL device. First one – to analyze information from Andrea Rossy blog, especially his answers to Frank Acland questions, taking into account a great sense of Andrea humour.
    The second approach scientific one – try to understand the principal of novel version. It is not dublicate the previous and I guess based on Shoulders and others electromagnetic effects with modifications using thermal Ecat expsriments. At least I will try to go this way and my decision will be in the next letter.
    I am sorry for possible grammar mistakes as I write from the phone.
    Best regards and good luck to everybody.
    Aleksei Savchenko

  • Sam

    Hello DR Rossi

    You said your different ECats
    are all your sons.
    I think the ECat SKL is your
    Precious Daughter.

    https://www.jw.org/en/library/music-songs/original-songs/precious-daughter/

    Regards
    Sam

  • CC

    Dr Rossi,
    Thank you for the great work of your team:
    Happy Easter to you all from a long time follower,
    CC

  • Andrea Rossi

    Nils Fryklund:
    I can’t answer,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Xavier Pitz:
    Thanks, data taken,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Anonymous:
    Thank you, data taken,
    Warm Regards,
    A.R.

  • Anonymous

    Mr Rossi,
    here are the SKL data: Electric power 0, efficiency 0%, cube or whatever size 0, weight 0, existence 0

  • Andrea Rossi

    Sven B.:
    Thank you, data taken,
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>