United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

26,903 comments to United States Patent US 9,115,913 B1

  • Christopher Diederichs

    Christopher Diederichs:
    I am not able yet to give information about the introduction of the Ecat in the market for sale, but when it will happen obviously it will be distributed in all Europe.
    Warm Regards,
    A.R.

  • Christopher Diederichs

    I want to ask when the Ecat will be commercially available and if it will be shipped also in Germany,
    Kind Regards,
    Christopher

  • Italo R.

    Dear Dr. Rossi,

    If you only need heat, is it preferable to use SK or SKL?

    Best Regards,

    Italo R.

  • Patrick

    Dear Andrea,
    Thanks for the answer.
    That has to assume that the electric ecat has similar costs to the heat-only ecat, right?
    Regards
    Patrick

  • Andrea Rossi

    Patrick:
    I think it would be better to use the SKL and convert electricity into heat, because such a conversion has a COP close to 1.
    Warm Regards,
    A.R.

  • Patrick

    Dear Andrea,
    If my factory manufacturing process required mainly heat but also a bit of electricity, would I just use the SKL and convert electricity back to heat? Or would you recommend using just a heat ecat for the heat, and the electric ecat for the electricity?
    Best regards
    Patrick

  • Frank Acland

    @Chuck Davis, you may be right. My experience over the last decade makes me think, however, it may not be as simple as that. There’s a lot of resistance to the E-Cat out there which could be hard to break through. I believe a strong presentation would help.

    Sincerely,

    Frank Acland

  • Andrea Rossi

    KeithT:
    The very peculiar formation-creation of coherent dense electron clusters at low entropy may form, in presence of protons, compact neutral aggregates at a picometric scale, formed by a coherent chain of bosonic electrons with protons located in the center of the Zitterbewegung orbits: in this electron rich environment, the creation-annihilation of virtual particles can happen only in presence of coherent dense electron clusters for the process to proceed. This, at least, is the theoretical hypothesis of the paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Warm Regards,
    A.R.

  • Andrea Rossi

    William R. Conley:
    Thank you for your empathy, but we are not in idle mode: every day we make a step forward.
    I need to attend the third parties tests, for obvious reasons.
    Same heartly wishes to you,
    Warm Regards,
    A.R.

  • KeithT

    Dear Andrea,

    Within your paper you have indicated that a coherent and dense electron cluster is required for the formation of a proton-electron aggregate.

    Once formed can a proton-electron aggregate exist on its own in the absence of the coherent electron cluster?

    Regards,

    Keith Thomson.

  • Chuck Davis

    @Frank Acland, I disagree with you regarding your comment on the presentation! I believe that the demand for the ecat will be so great that once Andrea is satisfied that its operation is ready for production buyers will be breaking down his door with orders! An appropriate guarantee of performance should be satisfactory!

    Warm regards,
    Chuck Davis

  • William R Conley

    Dr. Rossi,

    Like so many other things, the delay of hands-on testing of the eCat-SKL by the selected third-parties due to CV-19, must be as frustrating to you as I know it is to many of us watching this tremendous potential solution in idle mode.

    Even though Skype-based remote testing of the eCat-SKL is clearly insufficient, it occurs to me that it has been quite effective to a point and you must have increased your skill and facility with the Skype tool in the process. I’m left wondering why the test eCat-SKL reactors could not be provided to the third-party testers now and Skype used to communicate with them for test setups, protocol development, joint test monitoring etc. In this way, the hands-on testing could proceed without endangering anyone’s health and advance this important technology toward broad availability that much sooner.

    My best wishes on your continued progress with the eCat as well as your personal well being.

    Bill

  • Andrea Rossi

    Frank Acland:
    Obviously I totally agree.
    Warm Regards,
    A.R.

  • Andrea Rossi

    William:
    That is a hypothesis,
    Warm Regards,
    A.R.

  • William

    Dear Dr Andrea Rossi,
    Returning to your publication
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    and its visual demonstration on the video
    http://www.ecatskdemo.com
    I observed that also the plasma has a “zitterbewegung”: can it be that it derives from the transfer of energy from the electrons in phase to the electrons with a higher degree of entropy ?
    Thank you if you can answer,
    Bill

  • Frank Acland

    Dear Andrea,

    My opinion of collaboration and demonstration via Skype is that it is a very convenient tool for quick and inexpensive communication and collaboration, but in the case of demonstrating the E-Cat it cannot be enough.

    I think that even if you show a working E-Cat over Skype, along with live measurements of energy using your own instruments, the observers still cannot verify for themselves what you are showing them is real.

    With a new technology such as the E-Cat, businesses need to do due diligence before they can make business decisions about the E-Cat, and I think this will require hands-on access to the E-Cat, using their own instruments to verify the performance.

    I don’t think you can make a public presentation of the E-Cat until this is done, because for people to take the E-Cat seriously, there will need to be independent witnesses to verify the performance, who can then testify of what they have witnessed.

    What do you think?

    Many thanks,

    Frank Acland

  • Andrea Rossi

    Sam:
    Thank you, interesting link: there is evidence of the fact that, whereas it is possible to work on prototypes without a certification, it is generally made a process of certification even starting from the prototypal stage. Normally corporations prefer to start the certification process from the prototype, to avoid the risk to produce apparatuses that will not be approved.
    About the requirements, they are basically the same in all the industrialized Countries.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rinus:
    As a matter of fact, I never promised the presentation by the beginning of this year, albeit it is true that the limitations put after March due to the corona virus have generated issues, like, for example, the impossibility to allow personal tests, so that we had to work through Skype, which is not bad, but obviously it is not enough.
    Nevertheless, we are working very hard.
    Warm Regards,
    A.R.

  • Rinus

    You said that you will probably give a presentation this year. Was not the original plan to give a presentation at the beginning of this year? I understand that the Corona virus is causing an unexpected delay, but are there other reasons why the delay seems to be almost a year or so?
    Keep up the good work.

  • Sam

    Hello DR Rossi

    This is an article about Safety Standards
    for Prototype in the Province of B.C.
    in Canada.Is this similar to the Safety
    Standards you have to meet for the
    ECat SKL Prototype you are working on?

    https://www.technicalsafetybc.ca/news/use-prototypes-and-displaying-unapproved-equipment-bc

    Regards
    Sam

  • Andrea Rossi

    CC:
    The People of the USA, whose majority will decide who will be the winner.
    Warm Regards,
    A.R.

  • CC

    Dr Rossi,
    Who do you think will win the presidential elections of November 20 in the USA ?

  • Andrea Rossi

    Neri Bonfanti:
    Yes, we surely will make a presentation, probably within this year, troubles permitting.
    Warm Regards,
    A.R.

  • Neri Bonfanti

    Dear Andrea,
    are you planning any ecat presentation to present the net electrical output?
    I remember you were planning one in Sweden before the covid pandemic.
    Thank you for your kind reply
    Neri Bonfanti

  • Andrea Rossi

    Anonymous:
    Yes, that is sure.
    Warm Regards,
    A.R.

  • Andrea Rossi

    CC:
    I noticed that the “John Weir” you are answering to has a fake address, different from the address of the real John Weir, who has posted an intelligent comment on June 16th at 7.25 PM, to which I responded.
    This new “John Weir-with-a-fake-address-and-name is a troll, and is the usual well known paid troll that already has used as an impostor names of real Readers. Our robot usually spams all the comments and emails arriving from his source, probably has changed source. Never mind, just fun.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Jack:
    USA Europe and Asia
    Warm Regards,
    A.R.

  • CC

    @John Weir:
    The answer of Dr Rossi is correct. I have experience of certifications.
    Cheers
    CC

  • Jack

    Dear Dr Andrea Rossi:
    Can you tell us where are located the main potential Partners of Leonardo Corporation for the development of the Ecat SKL ?
    All the best,
    Jack Gardener

  • Anonymous

    Dear Dr Andrea Rossi,
    Is it sure and consolidated the fact that you are extracting from the plasma of the Ecat SKL more electricity than the electricity necessary to make the same plasma ?

  • Andrea Rossi

    John Weir:
    Obviously you do not know how certifications are made. The certifications are made also on prototypes, so far the eventual production will be coherent.
    The certification certificate reports the characteristics of the item that is certified, and how it has to me made to be safe, and obviously what is put under certification is better if it is a prototype, because it would be dangerous to initiate a production that eventually could be partially or totally wasted after the prescriptions of the certifier.
    Your phrase “prototypes do not get certified at all” is therefore groundless.
    Warm Regards,
    A.R.

  • John Weir

    Dear Dr. Rossi.

    Thx for the quick reply.

    But this still does not fit.

    How can a prototype be certified, as You already stated 2 or 3 times ?
    Prototypes do not get certified at all.
    John Weir.

  • Andrea Rossi

    John Weir:
    You must make a distinction between the fact that a prototype works well ( as it does, as many times I said ) in a laboratory and the fact that the same is ready and reliable for a massive distribution.
    The particulars to fix are many and they are like mushrooms: sometimes are born overnight in an unforeseeable way. But we are working hard and well.
    Warm Regards,
    A.R.

  • John Weir

    Dear Mr. Rossi,
    On more than one occasion, your response to questions concerning the E-CAT SKL contains the conditional phrase “if it will work.” Can you elaborate on what is meant by that since other replies indicate that it does work? What about it has yet to work that brings its practical application into question?
    Sincerely,
    John Weir

  • Andrea Rossi

    Dear Readers:
    Today has been published on the Journal of Nuclear Physics the paper “Energy Nature of Configurational Entropy”, by Dr Aleksei Savchenko.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rod Walton:
    Thank you for the update,
    Warm Regards,
    A.R.

  • Rod Walton

    On the Power Engineering issue of June 16 2020:
    Op-ed: Promising Outlook for Li-ion Battery Technology-Once Risks are Addressed
    Rod Walton

  • Andrea Rossi

    Prof:
    Yes and I am very sorry.
    I knew him well, because during my course of doctorate in Theoretical Philosophy I had to sustain the exam of Filosofia della Scienza ( Phylosophy of Science ) with Prof Ludovico Geymonat, in the year 1973 and Prof a latere during the exam was Giulio Giorello, at those times the main assistant of Prof Geymonat. I followed the lessons of Giorello on the Relativity Theory, that in those years was the main focus of his research. He was extremely intelligent and succeeded in the tenure of Geymonat when the last retired.
    The passing away of Prof Giulio Giorello is a loss for the European cultural environment.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Anonymous:
    We are working very well and I am very optimist about the development of the Ecat SKL,
    Warm Regards,
    A.R.

  • Anonymous

    Dear Andrea,
    Can you update us about how the R&D of the Ecat SKL is proceeding ?

  • Prof

    Dear Andrea:
    Probably you know that yesterday has died for the Covid 19 in Milan, Italy, Prof Giulio Giorello, teacher of Pylosophy of Science in your Alma Mater, the Università degli Studi of Milan, Italy. Did you know him ?
    Prof

  • Andrea Rossi

    Patrick:
    Thank you for your kind wishes and for the interesting link.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Prof:
    Sorry, tis information is confidential,
    Warm Regards,
    A.R.

  • Prof

    Dear Dr Andrea Rossi:
    Concerning your answer to K.B.
    If all the phenomenons described in
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    happen between cathode and anode, where is the core of the plasma, how can materials resist to the temperatures ?

  • Patrick

    Dear Andrea,

    Belated birthday wishes.

    You might find this interesting:

    “Two prominent X-ray emission lines of highly charged iron have puzzled astrophysicists for decades: their measured and calculated brightness ratios always disagree. This hinders good determinations of plasma temperatures and densities. New, careful high-precision measurements, together with top-level calculations now exclude all hitherto proposed explanations for this discrepancy, and thus deepen the problem.”
    From: https://scitechdaily.com/physics-problem-deepens-astrophysicists-puzzled-for-decades-rule-out-all-proposed-explanations/

    Regards,
    Patrick

  • Andrea Rossi

    K.B.:
    What I can say is that it is between the cathod and the anod that all the phenomenons described in my paper happen inside the Ecat SKL.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Dear Readers:
    Please go to
    http://www.rossilivecat.com
    to find comments published today in other posts of this blog,
    Warm Regards,
    A.R.

  • K.B.

    Dr Rossi,
    On
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    and on the video
    http://www.ecatskdemo.com
    appears that the sole area where you can insert the wiring to convey electricity out of the plasma is just around the cathod and the anod, am I correct?
    Thank you if you can answer
    K.B.

  • Andrea Rossi

    Sam:
    Now it’s the right one !
    Thank you,
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>