United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

42,810 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Dr Joseph Fine:
    Thank you for the links and for the corrections in your following comment,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Chuck Davis:
    Thank you for the information,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Manuel Cilia:
    It will depend on the location,
    Warm Regards,
    A.R.

  • Dear Dr Rossi
    Will you be enabling companies in other countries to have the rights to refill the empty E Cat fuel cartridges or will it be strictly through the manufacturer. Seeing what is happening around the world with supply chains it would be more secure if the fuel is produced locally.

    Thank you

  • Chuck Davis

    Dear Andrea, Here is some important info for you and your readers: http://www.krispin.com/lectin.html

    Warm regards,
    Chuck Davis

  • Joseph Fine

    Previous posting on the relationships of Relativity and Quantum Mechanics.

    Dragan and Ekert (not Egert)
    Errata:

    The authors are

    Andrzej Dragan
    Faculty of Physics, University of Warsaw

    and

    Prof. Artur Ekert
    University of Oxford; National University of Singapore

    Joseph Fine

  • Joseph Fine

    Dear Andrea Rossi,

    I recently noticed this article by Dragan and Egert (see link below) about the possible relationship between the “Relativities” (Special and General) and Quantum Mechanics.

    For years, these two theories (or three as Dragan pointed out) seemed irreconcilable. Usually, the discussions were about applying relativities to large distances (e.g. astronomical and, closer to home, GPS uses) and Quantum Physics to small distances (nanotechnology, atoms, subatomic particles and…subatomic ‘clusters’).

    While Quantum Physics has peculiar properties and seems unrelated to Relativity, Dragan has found a way to derive quantum mechanical properties from Relativity. Although, his ideas have their own peculiarities.

    I thought this could be an interesting addition to your collection of messages.
    Perhaps, there are new applications or ideas here waiting to be found.

    https://www.eurekalert.org/pub_releases/2020-04/fopu-drl040220.php

    https://doi.org/10.1088/1367-2630/ab76f7

    Joseph Fine

  • Andrea Rossi

    Thomas Florek:
    Hi, Thomas !
    I will watch the Super Bowl, obviously; I am rooting for the Washington Redskins since 1979, when I started to work in the USA in Washington, when the President was Jimmy Carter; the Redskins have been the first team I saw, so that since then I sympathized for them; but Brady is a phenomenon. It will be fun.
    Warm Regards,
    A.R.

  • Will you be able to catch any of the super-bowl? Will you be rooting for Tom Brady?

  • Andrea Rossi

    CC:
    Thank you for your attention to the work of our team,
    Warm Regards,
    A.R.

  • CC

    Dear Dr Andrea Rossi,
    I read
    http://www.ingandrearossi.com
    I have been impressed by your resilience. I believe your presentation of the Ecat SKL will be a veritable reminder of what Nikolas Tesla made at the Expo of Chicaco at the end of the 19th century, as reader said yesterday in a comment here.
    Goof luck,
    CC

  • Andrea Rossi

    Jan Srajer:
    Higher, but still not relevant in the balance.
    Warm Regards,
    A.R.

  • Jan Srajer

    Mr. Rossi
    Finally the last question. the operating price of E-CAT-SKL maintenance will be lower, higher, comparable to the price of fuel the E-CAT-SKL?
    Warm Regards

  • Andrea Rossi

    Jan Srajer:
    No
    Warm Regards,
    A.R.

  • Andrea Rossi

    Sven:
    Thank you,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Matias Mattsson:
    Thank you for the links and for your kind wishes,
    Warm Regards,
    A.R.
    P.S.:
    Your comment is the number 55 000 of this blog

  • Andrea Rossi

    Franz:
    Enough.
    Why are you asking ?
    Warm Regards,
    A.R.

  • Andrea Rossi

    Madaline:
    Being a transfer of of energy, there is not a loss or gain of energy, therefore there is neither.
    Warm Regards,
    A.R.

  • Franz

    Dear Mr.Rossi,
    how many licensees do you have up to now?
    Best regards
    Franz

  • Madaline

    Dear Dr Andrea Rossi:
    in par. 4 of
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    in page 12 you write in the tenth line from the bottom: ” … This mass-transfer obviously does not violate the princple of energy conservation…”
    Can you explain how this ?

  • Hi Mr Rossi!

    I whish you all the best in your fantastic work!
    I hope you will come to the market this year.

    Maybe this Article will interest you, a new explanation of the ever expanding Universe.
    http://pubs.sciepub.com/ijp/8/2/4/

    You will find more on that matter here:
    https://www.jteriksson.com/

    Some how I feel this may be an explanation of the e-cat, the power from something to appears to be empty but is not.

    Keep up the good work!

    Br
    Matias

  • Sven

    Dr Rossi:
    The fact that the Ecat SKL will turn on lights during the presentation is very fascinating: I too think that this demonstration will remind the Chicago Expo demo of Tesla.

  • Jan Srajer

    Mr. Rossi
    One theoretical question: Would it be possible to use E-CAT-SKL in space as a particle generator for a rocket engine?
    Warm Regards

  • Andrea Rossi

    Eric A. Woudenberg:
    Great work, thank you for the help you donate us ten years since !
    Warm Regards,
    A.R.

  • Andrea Rossi

    Mark U:
    The A.I. would sense it and signsl the necessity to change the module.
    Warm regards,
    A.R.

  • Mark U

    Dear Andrea,

    A couple of things.

    Firstly, after clicking on CC’s link to your paper at
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    I am pleased to say I can now both read and download it.
    For weeks Mac users like myself were unable to do so, but it looks like the Mac OS most recent update has fixed this issue.

    Secondly, I was wondering about the outcome if you were to replace the normal charge cartridge of the Ecat with a cartridge of non working ingredients (say, without hydrogen).
    Which of the following scenarios would best describe the outcome?
    1) the Ecat would still output electricity and some heat, but the energy out would be the same as the energy in.
    2) the Ecat would suffer damage and not work
    3) the Ecat controller would sense something, like too much resistance, and not power the Ecat
    4) you have not tried this and don’t know
    5) confidential

    Thank you, and best wishes for your preparations,
    Cheers from Toronto,
    Mark

  • Dear Rossi-world:

    A rewritten version of the RossiLiveCat website is now available for preview at:

    http://new.rossilivecat.com

    I am interested in your comments and suggestions; please send them to eaw@woudy.org (I do not feel Rossi’s forum should be used for such discussions).

    Assuming there are no major issues I will publish it to the public URL shortly.

    Thank you,
    Eric Woudenberg
    eaw@woudy.org

  • Andrea Rossi

    Rudi:
    Prudentially I’d say the forth quarter.
    Warm regards,
    A.R.

  • Andrea Rossi

    CC:
    Yes, it is very interesting.
    Thank you for the link,
    Warm Regards,
    A.R.

  • CC

    Dr Rossi,
    This interesting article ” Measuring Propagation Speed of Coulomb Fields ” corroborates the concept of S field you published in the updated version of
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    https://arxiv.org/abs/1211.2913
    Cheers,
    CC

  • Andrea Rossi

    Stephen:
    The Ecat SKL has a higher power density and has a ratio 9:1 of Electricity/Heat. We made an enormous progress.
    Thank you for your attentin to our work,
    Warm Regards,
    A.R.

  • Stephen

    Dear Andrea .

    I recall a few years aback you considered the ecat QX as a kind of minimal sized device.

    But you you have made a lot of work since then of course.

    Is the new minimal e-cat SKL something similar in size to the e-cat QX or something more fundamental or something else altogether.

    I appreciate the technology is substantially evolved from the e-cat QX. Electricity rather than heat. Improved maters and control. But I wonder if the are comparable in size and power.

    Best Regards

    Stephen.

  • Andrea Rossi

    Dear Readers:
    Please find on
    http://www.rossilivecat.com
    new comments published on other posts of this blog,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stefano:
    Thank you for your opinion and your kind suggestions,
    Warm Regards,
    A.R.

  • Chuck Davis

    Dear Jitze, My electrical requirements could be satisfied by a .69 KW ecat while tied to the grid but would require somewhere around 50 kW with an off-grid ecat and I’ll bet the latter will cost much more than the former! The difference is because in an off-grid configuration the ecat must provide the worst case instantaneous load while in the grid-connected configuration the instantaneous bursts can be drawn from the grid.

    Warm regards,
    Chuck Davis

  • Dear Andrea,
    As most of us do not understand physics (I am biologist) I would recommend very kindly that you, at the presentation, please explain in very layman terms the theory behind the Rossi Effect.
    Another suggestion. The last presentation, even after audio/video editing, was good for a scientific public but not suitable “as commercial/adv”. If you are very close to selling the ecat as product and you are going to present this as novelty, the style should be proposed as a commercial. I would ask investors to spend a bit of money in preparing a professional show followed by a fancy video-commercial.
    Unless, you are far from this stage and you will present only as experiment, proof-of-concept, and a prototype. That is a different thing.
    I wish you all the best.
    Stefano

  • Andrea Rossi

    Jitse:
    I take advice of your suggestions,
    Warm Regards,
    A.R.

  • Andrea Rossi

    François MUZARD:
    Thank you for your suggestion,
    Warm Regards,
    A.R.

  • Andrea Rossi

    It describes an energy-mass change, whose sign depends on the sign of the product eS. This is a consequence of a vacuum polarization generated by the scalar field S.
    Warm regards,
    A.R.

  • Jitse

    Dear Dr Andrea Rossi

    I will give you some solutions for using the E-cat SKL for private use:
    1- not connected to the electrical network (grid), result; 100% CO2 free and free energy.
    2- linked to a self-managed 100-house DC network for example; 100% CO2 free and free energy and interference insensitive.
    3- linked to an electrical network 100% CO2 free, insensitive to faults and costs are determined by the government and network owners (so very expensive).
    4- in all examples the use of local gas can be shut off.
    5- production of electrical energy can be used for other purposes such as;
    Support grid energy production, (windmills, large-scale solar panels in parks, etc.)

    Regards Jitse

  • François MUZARD

    Dr Rossi,
    vous allez présenter l’e-cat, en le chargeant avec des radiateurs électriques.
    J’ai une suggestion à vous faire, pour matérialiser d’une façon spectaculaire, la puissance absorbée séparément par chaque radiateur.
    C’est une astuce simple que j’utilise dans mon laboratoire.
    Il vous suffirait de passer à travers un tore en ferrite un des conducteurs du radiateur. (Tout le monde verrait que celui-ci coulisse librement sur le fil!) Ce tore doit comporter un enroulement supportant deux Leds soudées tête-bêche. Nous avons un courant dans l’enroulement, sensiblement proportionnel à la dérivée de I principal, et absorbé par une Led à chaque alternance. Les Leds se protègent mutuellement des pics de U inverse.
    (Un T I du commerce ne convient pas car ne donnant pas assez de U et aussi trop de P)
    A votre disposition pour éventuellement plus de détails…
    Très cordialement
    François

  • Andrea Rossi

    Jan Srajer:
    Yes.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Norma:
    Thank you for your attention to the work of our Team,
    Warm Regards,
    A.R.

  • Norma

    Dr Rossi,
    The idea to present the Ecat SKL using as a load also lights reminds me the Tesla illumination of the Chicago Expo of the year 1893: he invented the alternate current illumination, you are inventing the illumination made by a current with more energy than the consumed energy.
    All the best,
    Norma

  • Jan Srajer

    Mr. Rossi
    Is the E-CAT-SKL electomagnetically compatible with the environment?
    Warm Regards

  • Rudi

    Dear Mr. Rossi,
    can you meanwhile tell us a date or at least the quarter for the presentation?
    The plant for e-cat is ready, maybe you are also able to tell us the quarter when the sales to the industry- and the home-version of the e-cat will start?
    Best regards
    Rudi

  • Andrea Rossi

    KeithT:
    our experiments have corroborated the theoretical system explained in the paper on Researchgate, and at the presentation a synthesis of this fact I think will have to be explained.
    Warm Regards,
    A.R.

  • KeithT

    Dear Andrea,

    Within your ResearchGate paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    there are theoretical frameworks that explore the possibilities of electromagnetic potentials interacting with a Zitterbewegung model of the electron as being the basis of energy release.
    In physics theories and models live or die through experimental evidence, in the time since the initial release of the paper, there has likely been a number of experiments utilising E-Cat SKL’s or experiments based on E-Cat SKL technology to confirm the validity of the theories, will details of experimental evidence be released at the time of the presentation, at the time of product launch, or is detailed experimental evidence too revealing and considered confidential?

    Regards,

    Keith Thomson.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>