Steven Nicholes Karels:
First of all, assembling the Ecat SKLep units and the Mini-Ecat SKLep units it is possible to reach any power. We are working also on the miniaturization of the modules to resolve the problem. Maybe bigger components will become useless, if not worse, minimizing the negative effects on the assembly from a break of a unit.
Warm Regards,
A.R.
@Lars,
thank you for your comment of yesterday with the link to the report of the HDIAC; thanks to you we won’t ignore which is the opinion of one of the highest scientific echelons of the USA about the Ecat.
Rupert
Dear Andrea one more question if I may:
Does the ground connection make the zero point energy effect work more stable ?
Is it better for the stability of Ecats to make the Ecats out if there is a lot of small size units?
Prof:
Thank you for the important link, I didn’t know about it.
I am profoundly honoured of this link of the HDIAC. We of Leonardo Corporation, a US company, owe to this great Country our very existence.
The Ecat is made in the USA.
Warm Regards,
Andrea Rossi, CEO of Leonardo Corporation
Giuseppe:
An application like the one you suppose here necessitates the installation to be made by a professional certified contractor. Certainly we require the connections are made with certified outlets.
Warm Regards,
A.R.
Dear Andrea,
In the past few days, you replied that I can use the Ecat-Lep\Mini if connected to the home photovoltaic system even if disconnected from the grid provided it is properly grounded. Normally all the sockets in the house are connected to ground but, what would happen if, by mistake, we connect the Ecat to a socket with no ground. It just doesn’t work or it wouldn’t work safely.
Regards, Giuseppe Censorio
Patrick:
With electricity you cannot cut edges. It is always necessary the help of a certified electrician when you make electric installation, unless you plug our Ecats as they are, respecting the connection Voltage, without any modification or particular configuration.
Warm Regards,
A.R.
Allow me to be very specific, as per your request.
I use a normal bread toaster every morning that consumes 1000Wh/h to toast some bread for my family. I just plug it straight to the wall at 220V AC.
I want to plug it into the ecat instead, so I can save energy and money.
1. How many Sklep devices will I need?
2. How many “power converters” will I need?
3. Do the devices come with a way to connect them with each other, instead of to the wall?
4. How much Wh/h will the “power converters” use?
Dear Dr. Rossi,
now it is mid of September. Could you say how many pre-orders you already have?
Will the weekly increase reach the aim of one million soon? or just in december?
Best regards
F.Heinzmann
Dr Rossi:
Dr Rossi,
Thank you for all the information you gave here about the ground connection issue.
I think you must not lose more time with instrumental questions.
Best
Norma
I’m looking at ordering some Minis.
I read on the product page:
“An input power converter is included and can be used to power multiple units”
1. What is the maximum number of devices that can be powered by one of the included power converters?
2. How much Wh/h does the supplied power converter draw from the grid when powering the maximum number of devices stated in 1?
3. Can I save some money if I opt to get less power converters than devices? For example, if I order 10 Minis but just 1 power converter
4. Will the Mini have a special connection to connect to another Mini to it (instead of connecting our to the power converter) for when I want to use 1 power converter to power multiple Minis?
Appreciate it if you can answer before I put the order through.
You indicate that a return to a ground is needed for proper SKLep operation (GRID or earth ground). Is this because a space charge is formed around the SKLep during operation?
Dr. Rossi,
In terms of the current situation a funny thought occurred to me:
Metaphorically speaking, if Zero Point Energy were to be considered the “Cosmic Power Socket”, then the “socket” should come with the following advisement: “Grounding Required (not included)”. 😉
Gentile Dot. Rossi
Domande per E-CAT SKlep 12 volt, per una installazione su una barca in mare.
1) può funzionare la messa a terra in acqua ?
2) può essere alimentato da un inverter 220 collegato alle batterie di bordo?
3) può alimentare/ricaricare le stesse batterie ?
4) è un problema se le batterie di bordo sono anche alimentate da pannelli solari ?
Grazie
Fabio
English synopsis: this comment asks how to connect an Ecat in a boat
In your specifications for SKLep 10W. at https://ecat.com/ecat-minisklep it says:
– Power consumption: 0 Wh/h. and Energy Cost: $25 per MWh.
– If the Power consumption = 0 Wh/h. , then must be the Energy Cost also $ 0 ??
– Where’s the error here ?
– what am i not understanding here ??
Mr.Rossi
I would like to see E-catSKLep in electric cars. To have part of the battery replaced with an E-cat.
Does it will be possible?
All the best J.Š.
to support the Ecat-Project and to bring around a real Energy-Transition … no CO2-Emission, decentralized Energy Supply, recyclable, Applications for Home-Electricity and especially – with the Gas-Prices continuing to rise – for Home-Heating in the coming winter …
We opened a Telegram-Q&A Group for making applications – using the Ecat SKLep – transparent and realizable.
The discussions are mostly written in German and English language.
We also working on a monthly international Ecat Talk via Zoom to exchange ideas and find more supporters.
In this group we also organizing a collective order. The actual amount of pre-ordered Ecats is: 1950 Units.
since without a grid connection the E-Cat is not working, somebody could think the energy is actually taken from the grid and not generated by the E-Cat itself…
Therefore my question is: did you perform all possible tests in order to exclude any parasitic current is flowing between neutral and earth or in any other way from the grid ?
Thanks a lot if you want to explain.
Warm Regards,
Riccardo
Steven Nicholes Karels:
First of all, assembling the Ecat SKLep units and the Mini-Ecat SKLep units it is possible to reach any power. We are working also on the miniaturization of the modules to resolve the problem. Maybe bigger components will become useless, if not worse, minimizing the negative effects on the assembly from a break of a unit.
Warm Regards,
A.R.
Dear Andrea Rossi,
Can you provide an update on development status of the 1kW (or larger) SKLeps?
@Lars,
thank you for your comment of yesterday with the link to the report of the HDIAC; thanks to you we won’t ignore which is the opinion of one of the highest scientific echelons of the USA about the Ecat.
Rupert
Victoria:
Thank you for the information,
Warm Regards,
A.R.
Dr Rossi:
The important report of the Department of Defense about the Ecat has been published also on
E-catworld
All the best,
Victoria
Xavier Pitz:
Thank you for the link,
Warm Regards,
A.R.
Lars:
Who wrote that report has surely read and understood the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
I have nothing to add,
Warm Regards,
A.R.
Lars:
Also,
Warm regards,
A.R.
Dear Andrea one more question if I may:
Does the ground connection make the zero point energy effect work more stable ?
Is it better for the stability of Ecats to make the Ecats out if there is a lot of small size units?
Dear Andrea,
the link from https://hdiac.org/technical-inquiries/notable/concepts-behind-e-cat-sk/
described it very well. Is there somthing you like to add?
Dear Andrea,
Another article that you and some other readers will maybe find interesting :
https://bigthink.com/starts-with-a-bang/something-from-nothing/
Best Regards,
Xavier Pitz
@Prof:
Thank you for the important link !
Roberto
Prof:
Thank you for the important link, I didn’t know about it.
I am profoundly honoured of this link of the HDIAC. We of Leonardo Corporation, a US company, owe to this great Country our very existence.
The Ecat is made in the USA.
Warm Regards,
Andrea Rossi, CEO of Leonardo Corporation
Dr Rossi:
A troll sent the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
to US Defense Technical Information Center of the Department of Defense asking them to read it asking them to discredit it because groundless.
This poor troll experienced on himself the pain of the boomerang effect: in fact, you can read the response of the Defense Information Center here:
https://hdiac.org/technical-inquiries/notable/concepts-behind-e-cat-sk/
Ad majora !
Prof
Giuseppe:
An application like the one you suppose here necessitates the installation to be made by a professional certified contractor. Certainly we require the connections are made with certified outlets.
Warm Regards,
A.R.
Dear Andrea,
In the past few days, you replied that I can use the Ecat-Lep\Mini if connected to the home photovoltaic system even if disconnected from the grid provided it is properly grounded. Normally all the sockets in the house are connected to ground but, what would happen if, by mistake, we connect the Ecat to a socket with no ground. It just doesn’t work or it wouldn’t work safely.
Regards, Giuseppe Censorio
Patrick:
With electricity you cannot cut edges. It is always necessary the help of a certified electrician when you make electric installation, unless you plug our Ecats as they are, respecting the connection Voltage, without any modification or particular configuration.
Warm Regards,
A.R.
Dear Andrea,
Thank you so much for your kind answers. It helps a lot.
Will I need to engage professional electrician to connect the 10 devices together?
Or can I ask Leonardo to deliver them connected together already?
Or is it easy and safe enough to do it myself, not being a qualified person?
Thanks again if you can answer.
Best regards
Patrick
Patrick:
1- 10 x 100
2- 1
3- no
4- depends on their efficiency
Warm Regards,
A.R.
Jeff:
No,
Warm Regards,
A.R.
Will a neon bulb glow if held next to a running SKLep?
Dear Andrea,
Thanks for your reply.
Allow me to be very specific, as per your request.
I use a normal bread toaster every morning that consumes 1000Wh/h to toast some bread for my family. I just plug it straight to the wall at 220V AC.
I want to plug it into the ecat instead, so I can save energy and money.
1. How many Sklep devices will I need?
2. How many “power converters” will I need?
3. Do the devices come with a way to connect them with each other, instead of to the wall?
4. How much Wh/h will the “power converters” use?
Thanks in advance.
Best regards,
Patrick
Patrick:
1- depends on the specific situation
2- same as in 1
3- no
4- same as in 1
Warm Regards,
A.R.
WaltC:
He,he,he…
Warm Regards,
A.R.
Steven Nicholes Karels:
Moreless
Warm Regards,
A.R.
Steven Nicholes Karels:
Confidential,
Warm Regards,
A.R.
Norma:
Thank you for the suggestion,
Warm Regards,
A.R.
Frank H:
Premature,
Warm Regards,
A.R.
Dear Dr. Rossi,
now it is mid of September. Could you say how many pre-orders you already have?
Will the weekly increase reach the aim of one million soon? or just in december?
Best regards
F.Heinzmann
Dr Rossi:
Dr Rossi,
Thank you for all the information you gave here about the ground connection issue.
I think you must not lose more time with instrumental questions.
Best
Norma
Dear Andrea,
I’m looking at ordering some Minis.
I read on the product page:
“An input power converter is included and can be used to power multiple units”
1. What is the maximum number of devices that can be powered by one of the included power converters?
2. How much Wh/h does the supplied power converter draw from the grid when powering the maximum number of devices stated in 1?
3. Can I save some money if I opt to get less power converters than devices? For example, if I order 10 Minis but just 1 power converter
4. Will the Mini have a special connection to connect to another Mini to it (instead of connecting our to the power converter) for when I want to use 1 power converter to power multiple Minis?
Appreciate it if you can answer before I put the order through.
Best regards,
Patrick
Dear Andrea Rossi,
You indicate that a return to a ground is needed for proper SKLep operation (GRID or earth ground). Is this because a space charge is formed around the SKLep during operation?
Dear Andrea Rossi,
on “Energy Cost: $25 per MWh”
Is this computed by a purchase price of $25 USD, and output of 10W and a specified operating time of 100,000 hours. Thus, $25 for 1 MWh ?
Dr. Rossi,
In terms of the current situation a funny thought occurred to me:
Metaphorically speaking, if Zero Point Energy were to be considered the “Cosmic Power Socket”, then the “socket” should come with the following advisement: “Grounding Required (not included)”. 😉
Best Wishes,
WaltC
Martin:
There are other costs,
Warm Regards,
A.R.
Fabio De Juliis:
The Ecat cannot be installed in a boat until a specific certification for installation in a boat is achieved.
Warm Regards,
A.R.
Gentile Dot. Rossi
Domande per E-CAT SKlep 12 volt, per una installazione su una barca in mare.
1) può funzionare la messa a terra in acqua ?
2) può essere alimentato da un inverter 220 collegato alle batterie di bordo?
3) può alimentare/ricaricare le stesse batterie ?
4) è un problema se le batterie di bordo sono anche alimentate da pannelli solari ?
Grazie
Fabio
English synopsis: this comment asks how to connect an Ecat in a boat
Dear Andrea ,
In your specifications for SKLep 10W. at https://ecat.com/ecat-minisklep it says:
– Power consumption: 0 Wh/h. and Energy Cost: $25 per MWh.
– If the Power consumption = 0 Wh/h. , then must be the Energy Cost also $ 0 ??
– Where’s the error here ?
– what am i not understanding here ??
Best Regards
Martin
Dear Readers,
Please go to
http://www.rossilivecat.com
to find comments published today in other posts of this blog
Warm Regards,
A.R.
Dear Dr.Rossi,
will this installation work:
Car-batterie 12V 225Ah plus grounding with a copper-grid placed IN the Earth?
Thankful regards Robert
Mr.Rossi
I would like to see E-catSKLep in electric cars. To have part of the battery replaced with an E-cat.
Does it will be possible?
All the best J.Š.
Rick 57:
It is impossible that the current flows back from the earth to the load, for obvious reasons,
Warm Regards,
A.R.
Alma:
Europe,
Warm Regards,
A.R.
Claus:
Yes
Warm Regards,
A.R.
Dear Dr. Rossi,
thanks again for your work.
You did answer to Frank Acland, that the SKLep/MiniSKLep could run with any 220V external source, “provided they have an earth connection”
A) Do you mean the so called “N” neutral conductor (https://en.wikipedia.org/wiki/Earthing_system).
B) Does it mean, that an Ecat needs a connection to the Earth to be able to produce the electricity?
Greatings from Germany
Claus
Dear Blog-Readers,
to support the Ecat-Project and to bring around a real Energy-Transition … no CO2-Emission, decentralized Energy Supply, recyclable, Applications for Home-Electricity and especially – with the Gas-Prices continuing to rise – for Home-Heating in the coming winter …
We opened a Telegram-Q&A Group for making applications – using the Ecat SKLep – transparent and realizable.
The discussions are mostly written in German and English language.
We also working on a monthly international Ecat Talk via Zoom to exchange ideas and find more supporters.
In this group we also organizing a collective order. The actual amount of pre-ordered Ecats is: 1950 Units.
Telegram Group Link: https://t.me/+dMpJkr9WWw84ZDUy
Greatings
Claus
Dr Rossi,
After the USA, which is the area where are made most of the readings of the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
?
Best
Alma
Frank Acland:
Yes, provided they have an earth connection, like, for example, the normal power source units.
Warm Regards,
A.R.
Warm Regards,
A.R.
Roby:
USA
Warm Regards,
A.R.
Dear Andrea,
since without a grid connection the E-Cat is not working, somebody could think the energy is actually taken from the grid and not generated by the E-Cat itself…
Therefore my question is: did you perform all possible tests in order to exclude any parasitic current is flowing between neutral and earth or in any other way from the grid ?
Thanks a lot if you want to explain.
Warm Regards,
Riccardo