I am pleased to learn you are making progress. Would you say that your faster progress is due to:
a) Having more people with relevant expertise to work on the issues at hand?
b) Having more resources (funds and equipment) at your disposal?
c) The prototype is completed, and now you are dealing with standard engineering?
d) Having more experience with the E-Cat QX?
e) Problems being less difficult to resolve nowadays?
f) Having the support of a cooperative partner?
Frank Acland:
I am progressing at an exponential speed in these days, because issues that needed months to be resolved a couple of months ago now need less time. I give you a model from Dan Brown: to pass from the discovery of fire to the invention of wheel has taken millions years, but to pass from the invention of the wheel to the invention of an internal combustion engine it has taken thousands of years, and so on.
Obviously I can be wrong and find some unforeseen obstacle, by I am optimist: if you are not an optimist guy, you cannot be either an inventor or an enterpreneur, while I am both.
Warm Regards,
A.R.
Toussaint Francois:
Very stressing and difficult, but necessary. We need facts, not talks and facts are real mountains to climb, while words in our case are virtualities.
Warm Regards,
A.R.
Dr Andrea,
Did you see this blog? http://www.ecat-thenewfire.com
There is also a conference you made in Italian from Sweden after the IVA event in Stockholm on Nov 24th.
I like it.
Ciao,
Gus
Four days ago you said you were 70% sure that you would start the commercialization of industrial E-Cat plants in 2018; today you say you are 80-90% sure. Can you explain why your confidence has increased?
Dear Andrea Rossi,
In the video of the Stockholm event at IVA of November 24 I noticed that the Ecat QX had a sticker with a black cat silhouette and a red ball: is that the trade mark that will be put on the Ecats?
Cheers
Kira
Mr Andrea Rossi,
As of today how many probabilities you think are there, that within this year the first industrialized product will be put in the market?
Dino:
22 Passi, the Italian blog of Daniele Passerini, is an honest and equilibrated forum, wherein Mr Passerini publishes pros and cons. I think it is among the best Italian generalistic blogs that deal also with LENR issues, because it is driven without an agenda.
Obviously, any comments author is free to give his opinion, but when a marathon runner is racing, the opinions of the spectators are not going to change the results of the race for better or worse.
We ( my team and I ) are running to succeed to start the delivery of industrialized industrial plants within the year 2018 and if I will succeed it is not a matter of opinions, it is a matter of facts that will be done or not. The target is difficult, the effort is brutal, but I hope to win this marathon, while the sceptics can enjoy the race sitting on comfortable sofas, munching on pop-corn and sipping Coca-Cola.
Warm Regards,
A.R.
Caro Rossi,
In the blog 22 Passi of Daniele Passerini in a comment is said that the probability that you will be able to start the production of the Ecats within the year 2018 is non real.
Can you comment?
Dino
You wrote: “we are working with assemblies and they act just as an aritmetic summatory.”
1. Does this mean that when you combine individual E-Cat QX reactors together in an assembly, the heat from one or more individual E-Cat(s) does not interfere with the performance of others E-Cats in the same unit?
2. When you have multiple E-Cat QXs operating inside one assembly, is the operation of the control system that drives them adversely affected (compared to when only one E-Cat QX reactor is driven)
3. Do you mean that if you have 100 E-Cat QX reactors in one assembly, and each is rated (hypothetically) at 40W, that the overall output would be 4000W?
Thank you very much for the humorous little nod on my recent remarks. I am a fervent supporter and as such I can not imagine anything other than your success. So like any supporter I make predictions and dreams. It would be a nice success 76 years to the day after our great countryman Enrico Fermi.
Is an E-Cat radiator with one or two KWs economically feasible in the future to replace the current electric radiators of our homes?
Best regards
Raffaele
Luann Luers:
The issues of the defense of our intellectual property is left to our patent attorneys. Our patents have been worked upon by 39 ( Thirtynine ) patent attorneys.
My role in regard of the patents is just to give a detailed description of my inventions, all the other issues are up to the attorneys.
Warm Regards,
A.R.
Dr. Rossi, did you already try to assemble a large number of E-Cat QX together? Beyond the problems related to heat dissipation and temperature management, did you note if the operating parameters of the individual units are influenced by the proximity of the others? Thanks.
Dear Andrea,
I read on EW that both the patents of Piantelli have been revoked by the European Patent Office upon request of Leonardo Corporation. Is such revoke useful to your company?
L.L.
Dear Andrea,
You replied to Frank Ackland that you do not yet develop Ecats for generating electricity, but if a customer wants to use an E-cat QX for generating electricity, would you be able/willing to deliver one with the right properties (i.e. High pressure steam/ 500 deg C) in relatively short terms after you have industrialized the QX modules?
Thanks for answering our questions.
Kind regards, Gerard
Dear Andrea Rossi,
You are right to focus on heat production, which is the real duty of the Ecat, and leave the customers make with the heat what they need.
Stay focused on the presentation of the product by end 2018.
All the best,
Leonora
Frank Acland:
To make electricity we need the Carnot Cycle, then we can use the electricity to run the Ecat. Theoretically possible, but economically useless and complicated, so far.
What counts is the COP, with or without longer or shorted SSM. In future, after the launch of the product, we will spend time on this possibility, but I think in the short term our core business will remain to make heat, with which our Customers will make what they need.
Warm Regards,
A.R.
Harvey:
I have consulted many 3D printing presumptive manufacturers, but the prices are not competitive yet, either for what concerns the cost of the manufactured objects or for the cost of the 3D printers. They still cannot be taken in considerations for manufacturing processes and not even for the cost of prototypes. The technology is in evolution, though, therefore maybe eventually it will become competitive.
Warm Regards,
A.R.
Dear Andrea, I was reading the report sent in by Prof David Shea January 13th 2018 regarding Prof Atiko Takahashi.
I understand physics from a geometry/maths perspective and have recently been investigating mass deficit because of the mechanism which I referred to as a compressed atom, being not aware of mass deficit. It has therefore been for me a curiosity. My understanding is that six is a cubic number and therefore related to octahedral cavities. In the report Prof Atiko mentions that ratios are important to COP. My understanding is that six is important to stability.
Stability: Nickel 28 x 10 = 280 divide by Pd 46 = 6.086 10 x .086 = .86 of gap
Lithium 3 x 22 = 66 divide by Na 11 = 6.00
Therefore two cubic neutrals of opposite potential.
Thereby each Pd electron is surrounded by x 6 Nickel electrons and each Na electron is surrounded by x6 Lithium electrons providing two cubic neutrals of differing potentials.
Thereby Pd – major neg/minor neg (periodic table) is connected to Nickel being major neg/minor pos (periodic table). Every Pd electron is surrounded by x 6 Nickel electrons that are more positive than the Pd electron. This creates a cubic neutral with outside potential of negative major/positive minor. The inner potential is negative major/negative minor.
Thereby Na – major pos/minor neg (periodic table) is connected to Lithium being major pos/minor pos (periodic table). Every Na electron is by x 6 Lithium electrons that are more positive than the Na electron. This creates a cubic neutral with outside potential of major positive/minor positive. The inner potential is major positive/minor negative.
360 degrees represents a neutral. Therefore 22 parts of Lithium with one part Na provides a neutral 33 degrees. 280 parts of Ni with one part of Pd provides a neutral 326 degrees. Thereby there combined combination represents a neutral of 359 degrees. The 359 degrees requires two half potentials of positive and negative. The only way to provide such is one potential that resonates between the two cubic potentials i.e. hydrogen atom. What in theory the hydrogen atom would do is expand and contract with regards to its space, in a given time between the cubic neutrals because of being unattached. This activity in theory could shake the hydrogen atom to pieces by transforming its latent energy into kinetic energy that would produce plasma and thereby the heat without strong radiation.
Hoping this information is helpful. Regards Eric Ashworth
P.S. Maybe gas pressure alone will start/control the reaction without electrical input.
Have you considered using 3D printing in your manufacturing process. The following article posted today in phys.org discusses 3D printing of nanoscale nickel lattices. Not sure if this would apply in your process.
With the E-Cat QX plants, will it be possible to use the output of the E-Cat to drive a generator which will produce electrical power to drive the E-Cat plant itself? In other words, have a self-looped system, with no external electrical supply necessary.
Dr Rossi, consider this:Bitcoin has increased in value by over 3000 in the last few years alone. The Crypto World is exploding with potential right now – this is the time to start and profit! Find out more; http://bit.ly/-cryptocurrency
Dear Andrea,
I am pleased to learn you are making progress. Would you say that your faster progress is due to:
a) Having more people with relevant expertise to work on the issues at hand?
b) Having more resources (funds and equipment) at your disposal?
c) The prototype is completed, and now you are dealing with standard engineering?
d) Having more experience with the E-Cat QX?
e) Problems being less difficult to resolve nowadays?
f) Having the support of a cooperative partner?
Thank you very much,
Frank Acland
Dr Andrea Rossi:
Is the technology of the Ecat QX an evolution of the technology of the classic Ecat of 2011, or it is a revolution after it?
Ruby
Frank Acland:
I am progressing at an exponential speed in these days, because issues that needed months to be resolved a couple of months ago now need less time. I give you a model from Dan Brown: to pass from the discovery of fire to the invention of wheel has taken millions years, but to pass from the invention of the wheel to the invention of an internal combustion engine it has taken thousands of years, and so on.
Obviously I can be wrong and find some unforeseen obstacle, by I am optimist: if you are not an optimist guy, you cannot be either an inventor or an enterpreneur, while I am both.
Warm Regards,
A.R.
Toussaint Francois:
Very stressing and difficult, but necessary. We need facts, not talks and facts are real mountains to climb, while words in our case are virtualities.
Warm Regards,
A.R.
Sven:
Well.
Warm Regards,
A.R.
Dr Andrea,
Did you see this blog?
http://www.ecat-thenewfire.com
There is also a conference you made in Italian from Sweden after the IVA event in Stockholm on Nov 24th.
I like it.
Ciao,
Gus
Dear Dr Rossi,
How is proceeding the development of your work in Sweden?
Dear Andrea Rossi
You are progressing fast in the industrialisation of the E-CAT QX , in the past it was more complicated how does it feel to be running at your pace ?
Warm regards,
Toussaint françois
Dear Andrea,
Four days ago you said you were 70% sure that you would start the commercialization of industrial E-Cat plants in 2018; today you say you are 80-90% sure. Can you explain why your confidence has increased?
Many thanks,
Frank Acland
Priscilla:
Today I think between 80 and 90%.
Warm Regards,
A.R.
Kira Grau:
Yes, that is our registered trade mark.
Warm Regards,
A.R.
Lindsey:
As things have developed now, I think the first presentation of the product will be made in the USA.
Warm Regards,
A.R.
Bernie Morrissey:
All I can say is that the Ecat does not emit noise.
Warm Regards,
A.R.
Dear Andrea Rossi,
Would a jet engine driven by E-cat QX make less noise than one driven by combustion?
Bernie Morrissey
Dr Andrea Rossi,
Where do you foresee the first presentation of the industrialized product will be made?
Godspeed,
Lindsey
Dear Andrea Rossi,
In the video of the Stockholm event at IVA of November 24 I noticed that the Ecat QX had a sticker with a black cat silhouette and a red ball: is that the trade mark that will be put on the Ecats?
Cheers
Kira
Mr Andrea Rossi,
As of today how many probabilities you think are there, that within this year the first industrialized product will be put in the market?
Frank Acland:
1- yes
2- no
3- yes
Warm Regards,
A.R.
Dino:
22 Passi, the Italian blog of Daniele Passerini, is an honest and equilibrated forum, wherein Mr Passerini publishes pros and cons. I think it is among the best Italian generalistic blogs that deal also with LENR issues, because it is driven without an agenda.
Obviously, any comments author is free to give his opinion, but when a marathon runner is racing, the opinions of the spectators are not going to change the results of the race for better or worse.
We ( my team and I ) are running to succeed to start the delivery of industrialized industrial plants within the year 2018 and if I will succeed it is not a matter of opinions, it is a matter of facts that will be done or not. The target is difficult, the effort is brutal, but I hope to win this marathon, while the sceptics can enjoy the race sitting on comfortable sofas, munching on pop-corn and sipping Coca-Cola.
Warm Regards,
A.R.
Caro Rossi,
In the blog 22 Passi of Daniele Passerini in a comment is said that the probability that you will be able to start the production of the Ecats within the year 2018 is non real.
Can you comment?
Dino
Dear Andrea,
You wrote: “we are working with assemblies and they act just as an aritmetic summatory.”
1. Does this mean that when you combine individual E-Cat QX reactors together in an assembly, the heat from one or more individual E-Cat(s) does not interfere with the performance of others E-Cats in the same unit?
2. When you have multiple E-Cat QXs operating inside one assembly, is the operation of the control system that drives them adversely affected (compared to when only one E-Cat QX reactor is driven)
3. Do you mean that if you have 100 E-Cat QX reactors in one assembly, and each is rated (hypothetically) at 40W, that the overall output would be 4000W?
Thank you if you can answer,
Frank Acland
4. Do you mean that
Phiilip Tolson:
USA, Canada, Mexico, Chile, Brazil, Europe, Russia, China, Japan, Australia, Africa, India.
Warm Regards,
A.R.
Raffaele Bongo:
Yes.
Thank you for your support.
Warm Regards,
A.R.
Dear A. Rossi
Thank you very much for the humorous little nod on my recent remarks. I am a fervent supporter and as such I can not imagine anything other than your success. So like any supporter I make predictions and dreams. It would be a nice success 76 years to the day after our great countryman Enrico Fermi.
Is an E-Cat radiator with one or two KWs economically feasible in the future to replace the current electric radiators of our homes?
Best regards
Raffaele
Dr Andrea Rossi,
You wrote your intellectual property has been patented in the world by 39 attorneys: can you disclose which Countries are they in?
L.MD:
Thanks, I agree.
Warm Regards,
A.R.
Gerard McEk:
Yes.
Warm Regards,
A.R.
Luann Luers:
The issues of the defense of our intellectual property is left to our patent attorneys. Our patents have been worked upon by 39 ( Thirtynine ) patent attorneys.
My role in regard of the patents is just to give a detailed description of my inventions, all the other issues are up to the attorneys.
Warm Regards,
A.R.
Angelo V.:
Yes, we are working with assemblies and they act just as an aritmetic summatory.
Warm Regards,
A.R.
Alan:
Yes.
Warm Regards,
A.R.
Key:
Thank you for your attention to our work,
Warm Regards,
A.R.
I’m impressed, I must say, after watching the video of the IVA-Stockholm demo of Nov 24 on http://www.ecat.com
Dr Andrea Rossi,
Are you still working on the jet engine fueled by the Ecat QX?
Dr. Rossi, did you already try to assemble a large number of E-Cat QX together? Beyond the problems related to heat dissipation and temperature management, did you note if the operating parameters of the individual units are influenced by the proximity of the others? Thanks.
Dear Andrea,
I read on EW that both the patents of Piantelli have been revoked by the European Patent Office upon request of Leonardo Corporation. Is such revoke useful to your company?
L.L.
Dear Andrea,
You replied to Frank Ackland that you do not yet develop Ecats for generating electricity, but if a customer wants to use an E-cat QX for generating electricity, would you be able/willing to deliver one with the right properties (i.e. High pressure steam/ 500 deg C) in relatively short terms after you have industrialized the QX modules?
Thanks for answering our questions.
Kind regards, Gerard
Dear Andrea Rossi,
You are right to focus on heat production, which is the real duty of the Ecat, and leave the customers make with the heat what they need.
Stay focused on the presentation of the product by end 2018.
All the best,
Leonora
Bedy:
About 30%.
But qualitatively their importance is 50%.
Warm Regards,
A.R.
SK:
Thank you for your opinion.
Warm Regards,
A.R.
Merlyn:
Thank you for your attention to our work,
Warm Regards,
A.R.
Nila Nikirk:
I am convinced that bitcoins are a ponzi scheme vehicles. Sorry.
Warm Regards,
A.R.
Frank Acland:
To make electricity we need the Carnot Cycle, then we can use the electricity to run the Ecat. Theoretically possible, but economically useless and complicated, so far.
What counts is the COP, with or without longer or shorted SSM. In future, after the launch of the product, we will spend time on this possibility, but I think in the short term our core business will remain to make heat, with which our Customers will make what they need.
Warm Regards,
A.R.
Harvey:
I have consulted many 3D printing presumptive manufacturers, but the prices are not competitive yet, either for what concerns the cost of the manufactured objects or for the cost of the 3D printers. They still cannot be taken in considerations for manufacturing processes and not even for the cost of prototypes. The technology is in evolution, though, therefore maybe eventually it will become competitive.
Warm Regards,
A.R.
Attilio Gandi:
The sales will probably start within 2018.
Warm Regards,
A.R.
Eric Ashworth,
Thank you for your insight,
Warm Regards,
A.R.
Dear Andrea, I was reading the report sent in by Prof David Shea January 13th 2018 regarding Prof Atiko Takahashi.
I understand physics from a geometry/maths perspective and have recently been investigating mass deficit because of the mechanism which I referred to as a compressed atom, being not aware of mass deficit. It has therefore been for me a curiosity. My understanding is that six is a cubic number and therefore related to octahedral cavities. In the report Prof Atiko mentions that ratios are important to COP. My understanding is that six is important to stability.
Stability: Nickel 28 x 10 = 280 divide by Pd 46 = 6.086 10 x .086 = .86 of gap
Lithium 3 x 22 = 66 divide by Na 11 = 6.00
Therefore two cubic neutrals of opposite potential.
Thereby each Pd electron is surrounded by x 6 Nickel electrons and each Na electron is surrounded by x6 Lithium electrons providing two cubic neutrals of differing potentials.
Thereby Pd – major neg/minor neg (periodic table) is connected to Nickel being major neg/minor pos (periodic table). Every Pd electron is surrounded by x 6 Nickel electrons that are more positive than the Pd electron. This creates a cubic neutral with outside potential of negative major/positive minor. The inner potential is negative major/negative minor.
Thereby Na – major pos/minor neg (periodic table) is connected to Lithium being major pos/minor pos (periodic table). Every Na electron is by x 6 Lithium electrons that are more positive than the Na electron. This creates a cubic neutral with outside potential of major positive/minor positive. The inner potential is major positive/minor negative.
360 degrees represents a neutral. Therefore 22 parts of Lithium with one part Na provides a neutral 33 degrees. 280 parts of Ni with one part of Pd provides a neutral 326 degrees. Thereby there combined combination represents a neutral of 359 degrees. The 359 degrees requires two half potentials of positive and negative. The only way to provide such is one potential that resonates between the two cubic potentials i.e. hydrogen atom. What in theory the hydrogen atom would do is expand and contract with regards to its space, in a given time between the cubic neutrals because of being unattached. This activity in theory could shake the hydrogen atom to pieces by transforming its latent energy into kinetic energy that would produce plasma and thereby the heat without strong radiation.
Hoping this information is helpful. Regards Eric Ashworth
P.S. Maybe gas pressure alone will start/control the reaction without electrical input.
Dr Andrea Rossi
When will you start to sell the Ecats in France?
Dr. Rossi,
Have you considered using 3D printing in your manufacturing process. The following article posted today in phys.org discusses 3D printing of nanoscale nickel lattices. Not sure if this would apply in your process.
https://phys.org/news/2018-02-d-nanoscale-metal.html
Best Regards,
Harvey
Dear Andrea,
With the E-Cat QX plants, will it be possible to use the output of the E-Cat to drive a generator which will produce electrical power to drive the E-Cat plant itself? In other words, have a self-looped system, with no external electrical supply necessary.
If not, can you explain why not?
Many thanks,
Frank Acland
Dr Rossi, consider this:Bitcoin has increased in value by over 3000 in the last few years alone. The Crypto World is exploding with potential right now – this is the time to start and profit! Find out more; http://bit.ly/-cryptocurrency