JPR:
By the end of May an extremely important test will be completed and we will know if we reached a remarkable product or a failure.
Warm Regards,
A.R.
Dan Galburt:
Thank you for giving me the chance to make clear that the heating system of a factory is considered part if its industrial activity.
Warm Regards
A.R.
I am surprised that the first E-Cat QX products cannot be used for heating industrial plants in cold climates. Why would a safety certification that covers industrial processes not apply to industrial heating also?
CC:
Please send an email to info@leonardocorp1996.com
Please send us basic information of your concern, which use you will make of the heat. Please also send us the phone number and the name of the person we must contact.
We will contact you at our first convenience.
Warm Regards,
A.R.
Tom:
Yes, we are open now to begin to examine requests for 1 thermal MW plants, but only from industries that use directly the heat for their production process in their factories. For this utilization we have the necessary certifications and our industrialization is scheduled to start at the end of the year. Therefore the answer is YES, but the Customers must be aware of the fact that the delivery terms could be modified. The contracts will take in consideration this fact.
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
It seems to me that, at least initially, Leonardo Corporation will limit the sales to the Ecat to produce heat, while it will be up to the customers how to use that heat. Did I understand correctly?
Thank you,
Francis
Felix Meyer:
Thank you for the correction of the typo.
Yes, the correct address to find the documentation related to my past is http://www.ingandrearossi.com
Warm Regards,
A.R.
Dear Andrea Rossi,
Michael Dreitzer says he is reading http://andrearossi.com, but this is an error: the correct address is http://www.ingandrearossi.com
Please correct to avoid confusion,
Best Regards,
Felix Meyer
Dear Andrea:
I have gone through the whole website http://www.ingandrearossi.com
It is inspiring.
If those are your bases, the success of the Ecat enterprise is sure.
Godspeed,
Michael
In the video of the demonstration of the Ecat QX on November 24th in Stockholm I noticed that on the trade mark with the cat and the sun is written “Made in the USA”.
So the Ecats are made in the USA?
By the way: I was very sceptic about your effect, but I changed idea after this demonstration. Now I really hope you will succeed.
Cheers
Curtis
Bobbie Varnes:
Before that could happen, a wide distribution of industrial applications would be necessary. I can imagine a couple of years.
Warm Regards,
A.R.
Gerard McEk:
We are working also on the theory, but I am not ready to answer questions beyond what has been said during the demonstration of Stockholm on November 24th.When we will be ready, we will make a publication.
Warm Regards,
A.R.
Dear Andrea,
I am sure you and your team (i.e. Gullström) have been further developing the theory bebehind the Rossi effect.
1. Is any progress made?
2. Are you able to explain the released energy in comparison to the measured/analysed nuclear reaction products?
3. Is the theory in development in unison with the energy balance and reaction products?
4. Are you able to tell us what nuclear reaction in the Ecat QX produces most of the output energy?
I whish you great success with the SK module in the next few weeks.
Thanks and kind regards, Gerard
Dear Andrea!
I have some, for me interesting, questions:
1. Will the foodcompany, you have a contract with, use E-cat QX to cook warm food?
2. Warm up their factories?
3. Only invest in E-cat?
Best regards
Nils Fryklund
Anonymous:
I think intelligence can be compared to the intrinsic spin, being the capacity to understand the intimate inside of a problem and resolve it, while judgment can be compared to the orbital spin, being the capacity to orbit around a problem understanding how it is interpreted from the different points of view.
I think I need help on both of them. I also think a good CEO is the one that knows he needs help.
Warm Regards,
A.R.
In my opinion, for most people on the outside, I think any high COP reliable E-Cat product that you can put on the market is going to be considered a masterpiece. The SK may be better than the QX, but I think the QX, as you have described it, will be just fine to begin with.
You can always start with a limited run of QXs for the product launch, while you perfect the SK.
Sam:
1- increased the power to 1 kW with the same dimensions
2- eliminated the heating problems of the circuitry
3- designed the module in a way to be easily industrialized
Warm Regards,
A.R.
When you say “very difficult” is that because you are committed to a 2018 product launch, and it would be harder to have the SK ready in 2018, as compared to the QX?
Anonymous:
Yes, I can swear that all the information contained in
http://www.ingandrearossi.com is true.
Warm Regards
A.R.
JPR:
By the end of May an extremely important test will be completed and we will know if we reached a remarkable product or a failure.
Warm Regards,
A.R.
Hershel:
Yes.
Warm Regards
A.R.
Dan Galburt:
Thank you for giving me the chance to make clear that the heating system of a factory is considered part if its industrial activity.
Warm Regards
A.R.
Dear Dr. Rossi,
I am surprised that the first E-Cat QX products cannot be used for heating industrial plants in cold climates. Why would a safety certification that covers industrial processes not apply to industrial heating also?
Thank you
Dan Galburt
Dr Andrea Rossi,
Is the room heating considered part of a production process?
When do you think enough data will have been collected to allow to consider the Ecat SK a real alternative?
All the best
JPR
Can you swear that all the information on
http://www.ingandrearossi.com
is true?
CC:
Please send an email to
info@leonardocorp1996.com
Please send us basic information of your concern, which use you will make of the heat. Please also send us the phone number and the name of the person we must contact.
We will contact you at our first convenience.
Warm Regards,
A.R.
Dr Rossi:
I am interested to order a 1 MW Ecat for the factory I am the CEO of.
Can you give us a contact information?
Cheers
Tom:
Yes, we are open now to begin to examine requests for 1 thermal MW plants, but only from industries that use directly the heat for their production process in their factories. For this utilization we have the necessary certifications and our industrialization is scheduled to start at the end of the year. Therefore the answer is YES, but the Customers must be aware of the fact that the delivery terms could be modified. The contracts will take in consideration this fact.
Warm Regards,
A.R.
Charlie:
Thank you for your sustain,
Warm Regards,
A.R.
Dr Andrea Rossi:
Are you ready to accept orders for the industrial plants? If yes, how is possible to start a deal?
Thank you if you can answer,
Tom
Dear Andrea:
http://www.ingandrearossi.com : congratulations! You have all my sympathy.
Charlie
Francis:
You are correct.
Warm Regards,
A.R.
Franz:
Also.
Warm Regards,
A.R.
You said yesterday that the SK will have a higher COP than the Ecat QX shown in Stockholm: is that due to a longer SSM?
Dear Dr Andrea Rossi,
It seems to me that, at least initially, Leonardo Corporation will limit the sales to the Ecat to produce heat, while it will be up to the customers how to use that heat. Did I understand correctly?
Thank you,
Francis
Frank Acland:
Yes, but “should be there” is more proper than “is there”.
Warm Regards,
A.R.
Felix Meyer:
Thank you for the correction of the typo.
Yes, the correct address to find the documentation related to my past is
http://www.ingandrearossi.com
Warm Regards,
A.R.
Dear Andrea Rossi,
Michael Dreitzer says he is reading http://andrearossi.com, but this is an error: the correct address is
http://www.ingandrearossi.com
Please correct to avoid confusion,
Best Regards,
Felix Meyer
Dear Andrea,
Is there a substantial difference between the COP of the SK and the QX?
Best wishes,
Frank Acland
Aurelia:
Initially it will be indispensable, hoping to give room to my successor as soon as possible.
Warm Regards,
A.R.
JPR:
Yes.
Warm Regards,
A.R.
Kim:
Yes.
Warm Regards,
A.R.
Curtis Darryn:
Yes, the Ecat is made in the USA,
Warm Regards,
A.R.
Michael Dreitzler:
Thank you for your attention,
Warm Regards,
A.R.
Dear Andrea:
I have gone through the whole website http://www.ingandrearossi.com
It is inspiring.
If those are your bases, the success of the Ecat enterprise is sure.
Godspeed,
Michael
In the video of the demonstration of the Ecat QX on November 24th in Stockholm I noticed that on the trade mark with the cat and the sun is written “Made in the USA”.
So the Ecats are made in the USA?
By the way: I was very sceptic about your effect, but I changed idea after this demonstration. Now I really hope you will succeed.
Cheers
Curtis
Dr Andrea Rossi:
Has your patent been granted also in China and in Japan?
Thanks,
Kim
Dear Andrea:
You said the SK could be your masterpiece. Is this related also to the SSM?
All the best,
Jean Paul Renoir
When the industrialization will begin will you be still the CEO of Leonardo Corporation?
Bobbie Varnes:
Before that could happen, a wide distribution of industrial applications would be necessary. I can imagine a couple of years.
Warm Regards,
A.R.
Dr Andrea Rossi,
How much time do you think will be necessary for you to be able to deliver Ecats certified for domestic households?
Gerard McEk:
We are working also on the theory, but I am not ready to answer questions beyond what has been said during the demonstration of Stockholm on November 24th.When we will be ready, we will make a publication.
Warm Regards,
A.R.
Dear Andrea,
I am sure you and your team (i.e. Gullström) have been further developing the theory bebehind the Rossi effect.
1. Is any progress made?
2. Are you able to explain the released energy in comparison to the measured/analysed nuclear reaction products?
3. Is the theory in development in unison with the energy balance and reaction products?
4. Are you able to tell us what nuclear reaction in the Ecat QX produces most of the output energy?
I whish you great success with the SK module in the next few weeks.
Thanks and kind regards, Gerard
Nils Fryklund:
1- no
2- no
3- no
They use the heat in their production process,
Warm Regards:
A.R.
Anonymous:
Clowneries.
Warm Regards,
A.R.
Viktor Scipachev:
He,he,he… anyway the SK is not going to slow down the QX.
Warm Regards,
A.R.
Dear Andrea!
I have some, for me interesting, questions:
1. Will the foodcompany, you have a contract with, use E-cat QX to cook warm food?
2. Warm up their factories?
3. Only invest in E-cat?
Best regards
Nils Fryklund
Dear Andrea:
Remember that BEST is enemy of GOOD: the Ecat QX with a good COP wilol be enough of a masterpiece.
Best Regards,
Viktor Shipachev
There are around publications that talk of making precious metals like gold and platinum by means of LENR processes: what do you think?
Frank Acland:
I agree.
Warm Regards,
A.R.
Anonymous:
I think intelligence can be compared to the intrinsic spin, being the capacity to understand the intimate inside of a problem and resolve it, while judgment can be compared to the orbital spin, being the capacity to orbit around a problem understanding how it is interpreted from the different points of view.
I think I need help on both of them. I also think a good CEO is the one that knows he needs help.
Warm Regards,
A.R.
Dear Andrea,
Very interesting comments about the SK recently.
In my opinion, for most people on the outside, I think any high COP reliable E-Cat product that you can put on the market is going to be considered a masterpiece. The SK may be better than the QX, but I think the QX, as you have described it, will be just fine to begin with.
You can always start with a limited run of QXs for the product launch, while you perfect the SK.
Hoping for a successful 2018 launch!
Best wishes,
Frank
Andrea:
Do you think you have the intelligence and the judgment skills to be the CEO of a big company?
Frank Acland:
Exactly. But it could be a masterpiece. Probably my masterpiece. Or a failure.
Warm Regards,
A.R.
Sam:
1- increased the power to 1 kW with the same dimensions
2- eliminated the heating problems of the circuitry
3- designed the module in a way to be easily industrialized
Warm Regards,
A.R.
Hello DR Rossi
Could you give a summary of the improvements
you have made on the QX since the Stockholm
demo.
Good luck on the SK test this month.
Regards
Sam
Dear Andrea,
When you say “very difficult” is that because you are committed to a 2018 product launch, and it would be harder to have the SK ready in 2018, as compared to the QX?
Thank you,
Frank Acland