United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

35,471 comments to United States Patent US 9,115,913 B1

  • Steven N. Karels

    Dear Andrea Rossi,

    You are correct that most anything can be used as a weapon. But a 100kW UV light generator brings “rayguns” closer to existence. You might consider packaging the reactor portion in a way to make it difficult for it to emit light for nefarious purposes. Something to consider in the manufacturing engineering design studies.

  • Andrea Rossi

    Steven N. Karels:
    Do you know that the hammers can be used to break heads of humans? We must do something to prevent this. Not to mention the fact that really worries me: spoons can be used to plug off eyes of enemies during combats. How can we allow free use of spoons? When I was a military in Italy the instructor taught us how to use even a spoon as an arm. Did you think about that?
    Warm Regards,
    A.R.

  • Andrea Rossi

    Frank Acland:
    Both.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gerard McEk:
    They are two different situations that need different ways to take advantage of the energy made by the Ecat SK.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Enrico:
    The fact that ENI is not making any reference to my patent is not fair, but still they have the right to copy my patent, because it has expired on 1998.
    Anyway, I am glad that my work of 40 years ago is still useful for something and for an important concern like ENI is.
    Warm Regards,
    A.R.

  • Enrico

    Dear Andrea:
    ENI is communicating that has invented the process to turn wastes into oil, but they just copied your patent allowed in 1978 !
    I became very nervous reading this ad of ENI:
    http://www.eniday.com/it/talks_it/energy-snack-rifiuti-energia/
    Thay blatantly copied you and now they say they invented it.
    Why don’t you react ? They would at least recognize your merit if they today can do this…they copy also your slogan of 1978: ” like the nature does, but in a faster way”…the big ENI so servile vs you to be forced to hide you behind their fig leaf.
    I hope in the coming years they will not copy also the Rossi Effect.
    Godspeed,
    Enrico Degrada

  • Gerard McEk

    Dear Andrea,
    Congratulations with the successfull development of the very efficient heat exchanger.
    Just one question: Can this heat exchanger just be used for making steam or can you also use it for driving you gas turbine as well?
    Thanks.
    Kind regards, Gerard

  • Frank Acland

    Dear Andrea,

    Which do you think is the most promising way forward for the E-Cat SK: connecting with the gas turbine, or with your new heat exchanger to make steam?

    Kind regards,

    Frank Acland

  • Steven N. Karels

    Dear Andrea Rossi,

    Have you considered that the eCat SK could be used as a weapon of war? Consider a 100kW eCat SK at the focus point of a large parabolic mirror forming a focused or collimated beam. It would do considerable damage at a distance or as an “eye popper” of “skin burner”. I would suggest you design in safeguards to prevent that possibility.

  • Andrea Rossi

    Anonymous:
    1- yes
    2- yes
    Warm Regards,
    A.R.

  • Andrea Rossi

    B.M.:
    Under a substantial point of view there are no differences indeed, but there is a difference under the emotional point of view. Let’s see what we can do.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gastone:
    I checked o the Traccani: yes, you are right, they show a dwawing in scale that brings to the dimensions you cite. This confirms what I already said, which is that to stabilize a magnetic field of that power and dimensions is more difficult than let a camel pass through a needle eye. This is simply a steal of the money of the taxpayer, without any possibility to generate something useful, apart the expensive secondary parts, completely useless, that have been done so far to show that they are producing something. By the way: that article on the Treccani has been written in 1997 and presents the Eater as an imminent arrival in the horizon of the energy sources.
    Note: I have been informed that most of the attacks against the LENR arrive from that area, most of the attacks against me arrive from journalists connected with that area, obviously terrorized from the perspective that we do something industrialized and working without a cent spent from the taxpayer.
    I read that they have just got 500 million Euros, obviously from the taxpayer: 50 millions will be spent to make useless parts, the balance …
    Warm Regards,
    A.R.

  • Gastone

    Dr Andrea Rossi,
    I read on the Enciclopedia Treccani, Appendix 2000, that the hot fusion ITER plant will be 45 meters high and 20 meters of diameter. What do you think?
    Gastone

  • B.M.

    My opinion is that it is not important if the video of the Ecat in operation will be made in direct or delayed streaming. I do not see which is the difference.
    Cheers
    B.M.

  • Anonymous

    Hi, Dr Rossi!
    Does your patent cover substantially also the Ecat QX and the Ecat SK?
    Have been made also new patent applications related to the SK and the QX?

  • Andrea Rossi

    Eric Ashworth:
    Thanks for your insight,
    Warm Regards,
    A.R.

  • Eric Ashworth

    Dear Andrea, This information is a suggestion with regards the complexity of the workings of the eCat. As you are aware there are basically two levels to everything i.e. providing information. When in the presence of physicists the talk and diagrams would be highly technical but when with your industrial clients the talk could be less technical because people tend to lose interest if they cannot follow although they should have their own technical people. Thereby with clients you could refer to the eCat process as providing ‘soft energy reactions’ anything to do with nuclear could be a detriment and the eCat does produce soft energy reactions being hydrogen. The other thing is people like to be able to understand something without confusion. The eCat operates with regards to two opposite reactions with regards the hydrogen cycle. One reaction creates the hydrogen from plasma to provide the hydrogen with energy similar to how a battery contains energy i.e. its storage capacity. The other reaction dismantles the hydrogen in incremental amounts in the form of VPs. What I think would make the explanation easy is two none technical schematic diagrams that you could overlay or separate to visualize how the conservation and release of energy takes place without being overly technical. In one, I would diagram a dipole magnet and enclose it in a circle, have the plasma enter at the poles (the Northern lights is plasma) and use red to track it to the centre, where it is structured into an energy storage system i.e. hydrogen and from where it diffuses outside of the circle but within Earths atmosphere. Draw another circle, use blue, the same size and put an apex of a cone at the centre and its base just outside of the circle. This is a flux tube i.e a magnetic mono pole within which the transitions of hydrogen take place. Hydrogen could be depicted as a four arm spiral of four mass defects of values positive, neutral, negative, electron or positive pos., neutral pos., neutral neg., negative, neg. as charge potentials. that represent compressed units of potential energy. The hydrogen is arrowed gravitating into the base of the cone. Divide the cone into four equal sections. Hydrogen is composed of four parts but even though each part is composed of four neutrinos I would imagine there is no need to mention unless asked. Use blue to track the hydrogen as it enters the base of the cone, one curve to the right upwards to the first division on the edge of the cone at this position the electron is compressed to a neutral neg. so it is repelled out of the mono pole whereupon it expands as a VP, of a potential. This activity is repeated three more times in rapid succession as the charges ascend the cone in a spiralling format. This results in the hydrogen atom turning itself inside out with regards the potential charges of size dimension becoming charges of volume dimension due to the exerted potentials of the electro magnetic fields that compose the flux tube and thereby as long as there is hydrogen fuel the flux tube will provide plenty of energy as a mono pole by transforming the size dimensions of charge into volume dimensions thereby blue should depict a halo from each level of the cone that descends and within ascending in spiral format a succession of red rings that become a solid dot at the apex position. This could help to explain the hydrogen/VP cycle in a visual context. The VPs. become plasma when within the Earths environment that could be depicted in groups of four neutrinos being a weak structure that clump at the poles of the dipole magnet, ready to be once again transformed into hydrogen structure. The actual process is a little bit more complicated if you take those 7777 as neutrinos but being schematic it should be kept simple i.e. dealing just with the charges. If you overlay the base of the cone onto the dipole magnet it can be visualized how the charges go in and how they come out to form a cycle with regards the conservation of energy and the mass defect will be observed where the two circles overlap. Of course this is the big picture of why the eCat is perfection even though the hydrogen is provided by a cylinder. The difficulty with physics is trying to explain something that is complicated in an easy to understand fashion so as not to confuse and thereby put people at ease. Obviously demonstrations up to the present have been with regards physicists but just recently, You Tube was mentioned with regards streaming but if the general public have not a clue what is being demonstrated with regards a genuine scientific process the demonstration could create, once again, doubt and confusion. Therefore if you keep it simple, yet accurate, people will have a good idea how it produces so much heat. From experience I would say you need two types of promotion. Also with regards plasma outside of the Earths environment I would consider as dark matter i.e. a substance upon which a propellant-less system would push to achieve propulsion. I thought I would put this information forward just as a suggestion but if you spam it, I am fine. Regards Eric Ashworth.

  • Andrea Rossi

    Frank Acland:
    That would be fascinating.
    Let us see what we can do.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Tom Conover:
    Please give Luca my contacts to see if we find a solution.
    Warm Regards
    A.R.

  • Tom Conover

    Quoted from Luca Meli’s post 2 hours ago …
    Thank you for submitting this simple solution to Rossi. I hope his team will place all the effort to show things going on at their labs in a way they deserve. I’m here if they need my knowledge about how to setup all needed aspects.

    (I have asked Luca to provide the setup information, it will not involve youtube problems. Tom)

  • Frank Acland

    Dear Andrea,

    At the presentation, if you have a direct live video link from the conference room to the location where the E-Cat plant is, could you demonstrate the remote control system (with the controller in the conference room)?

    Many thanks,

    Frank Acland

  • Andrea Rossi

    Rea Maria:
    I think that the streaming on youtube will be delayed several hours. I already verified if it is possible to make it direct, as suggested in the comment of Tom Conover, but it is difficult for many reasons.
    Warm Regards,
    A.R.

  • Rea Maria

    dr Rossi,
    Will the presentation of the industrialized Ecat be in direct streaming?

  • Andrea Rossi

    Dear Readers:
    Please find on
    http://www.rossilivecat.com
    the comments published today on other posts of this blog.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Tom Conover:
    This is a very intelligent idea.
    Thank you and Mr Luca Meli for the suggestion published on e-catworld.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Delmy Maria:
    Theoretically, yes. In reality, it has to be proven.
    Warm Regards,
    A.R.

  • Delmy Maria

    Dear Andrea,
    Do you think the thrust from the Ecat SK could be useful to move trucks, cars etc?
    Thanks,
    Maria

  • Tom Conover

    Dear Andrea,

    Luca Meli was discussing tonight if could you possibly consider setting up your demonstration reactor at a remote (nearby) site and interacting with it through the cloud live from conference room you use? Live video could be streamed to the conference center without physical or legal risk to the conference room or any of the attendees.

    Luca also mentioned that during medical meetings they connect live from the operating room, and this method is used to allow medical professionals to view surgical procedures.

    I do not think you would need any special authorizations to simply play a live video in the conference room in this manner, and the presentations might end up being substantially more effective for all of us attending!

    Great work – astonishing progress! Thank you to your entire team, Andrea!

    Tom Conover

    Luca Meli Reference:
    https://e-catworld.com/2018/07/25/rossi-on-the-next-presentation-e-cat-plant-to-be-shown-operating-on-video/

  • Andrea Rossi

    Toussaint Francois:
    The charge is in the order od tens of grams – the figure is confidential – and the duration is expected to be longer than 6 months.
    Warm Regards,
    A.R.

  • TOUSSAINT francois

    Dear Andrea Rossi,

    One question please, what is the size of the fuel charge of the SK 100 Kw and the duration of the fuel ?

    Warm regards,

    Toussaint François

  • Andrea Rossi

    Ian Glen Walker:
    Sorry, I forgot the rest of your questions:
    We are going to sell heat, for whatever industrial use it could be. Our heated fluid will be treated by our Customers the same way they are using and turning it for their purposes already.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ian Glen Walker:
    I cannot answer in positive or in negative to your questions.
    The technology we use to exchange the heat will remain confidential for the time being.
    Warm Regards,
    A.R.

  • Ian Glen Walker

    Dear Andrea Rossi

    I presume that the method you use to transfer energy into the Turbine is water injected via what would normally be the fuel injection ports of the turbine in order to create flash steam rapid expansion and thus thrust that turns the turbine.

    Would you be so kind as to tell us how much water you go through.

    What sort of form factor are we looking at. Could we be looking at distributed, power generation and district or street heating?

    I presume you will be selling the heated steam and subsequently condensed hot water as well as the electricity generated.

    How you are you currently condensing the steam after use.

    Kind Regards Ian Walker

  • Andrea Rossi

    Brandon:
    He was the owner od SGS, the certification company that made the safety certification of the industrial Ecat, together with Bureau Veritas.
    Warm Regards,
    A.R.

  • Brandon

    Dr Andrea Rossi,
    Had you ever anything to do directly or indirectly with Sergio Marchionne?

  • Andrea Rossi

    Debbie:
    No, it is impossible to get the authorization to light up a reactor in a conference room. We will show a video of it in operation and, of course, will show the product, like a “sleeping beauty”.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Amico:
    The Ecat SK will be a multipurpose heat making reactor, like the others, also thanks to this new heat exchanging system that is able to get out all the energy even from a very small source.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rupert:
    Yes, we are already making it.
    Warm Regards,
    A.R.

  • Rupert

    Dr Andrea Rossi,
    Does your last answer mean you are already building the new heat exchanger for the Ecat SK?

  • Amico

    Dear Andrea Rossi,
    Will the Ecat SK be fit only for a gas turbine-like reactor or will it be useful also for other purpeses, like to make heat?
    Thanks,
    Amico

  • Debbie

    Will the Ecats be put in operation at the presentation you will make of the industrial products?

  • Andrea Rossi

    Frank Acland:
    In August.
    Warm Reagards,
    A.R.

  • Frank Acland

    Dear Andrea,

    When do you test your new heat exchanger system for the SK?

    Thank you,

    Frank Acland

  • Andrea Rossi

    CC:
    Yes!
    Warm Regards,
    A.R.

  • Andrea Rossi

    Domenico Canino:
    Thank you, interesting.
    Warm Regards,
    A.R.

  • domenico canino

    Dear Andrea,
    maybe this work of Prof. Carbone is of some interest for you;
    https://phys.org/news/2018-07-ultrashort-electron-harvest-nuclear-energy.html
    cold regards (in Calabria it is very hot)

  • CC

    Dr Andrea Rossi,
    The new heat exchanger you have invented to spoil the heat made by the Ecat SX will increase the energy density of the system Ecat+heat exchanger?

  • Andrea Rossi

    Gberra:
    Thank you for your insight and the suggestion,
    Warm Regards,
    A.R.

  • Gberra

    Apparently at a temp of 3000 degrees C 50% of water molecules dissociate to hydrogen and oxygen. Maybe the SK can be used to generate hydrogen. The current global hydrogen market >$100 billion per year. Hydrogen can be fed to a fuel cell to generate electricity. I wish you and your team the best of luck Andrea !

  • Andrea Rossi

    Daniel De Caluwé:
    Thank you, please pass it on to the webmaster!
    Yes, his service id very useful.
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>