Conceptually, could the eCat SK design that currently has a rating of 100kW thermal output be reduced in size say to 10kW or 1kW? My thoughts were for powering a small drone, using an eCat unit to go to thermo-to-electric conversion, with maybe 10% efficiency, one could fly the drone almost indefinitely.
Is there any potential advantage in the SK compared to the QX design at lower output levels?
One application I know of is mapping icebergs as they move into the Atlantic shipping lanes. A job currently done by manned aircraft at some risk to the crews. A very long duration, small drone, with suitable satellite uplink capabilities to send back imagery. would be a valuable asset.
Dr Andrea Rossi:
I watched the youtube video of the test of the Ecat QX made in Stockholm on Nov 24th 2017.
It has been perfect, undisputable the way the water flow has been measured, the way the oscilloscope has measured the energy consumed.
Very convincing.
All the best,
Gino
Ruby:
In September we will make a series of very important experiments with the Ecat SK and at that point we will know if we have a product, or just a prototype to be worked upon again.
Warm Regards,
A.R.
Mario:
So far, combining consulting fees, instrumentation, invention and making of tools and instruments, experiments, Leonardo Corporation invested in this particular research about 20 000 $, obviously considering zero the cost of my personal work, that can be computed around several hundreds of hours in the last year, since when I had the intuition of the annihilation of virtual Fermions, wrong or correct as it might be.
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
I watched the whole 3 hours video on youtube ECAT QX STOCKHOLM DEMONSTRATION NOVEMBER 24 2017 and I am glad I did it: very convincing.
Waiting for the industrial product,
Godspeed
Ignacio
Dear Andrea,
When will you know if also the Ecat SK will be introduced at the presentation of the industrialized products?
Thanks if you can answer,
Ruby
Are you planning to share the results of your experimental work with Carl-Oscar Gullstrom with the public, or is this for Leonardo’s internal use only.
Loretta Steinharter:
We have to make important experiments with new instrumentation we are inventing to find evidence of the annihilation of virtual Fermions. I hope and think we will have the instrumentation ready by September/October and eventually we’ll make the job. Probably in Sweden.
Warm Regards,
A.R.
Gerard McEk:
1- electricity generation is surely one of its task
2- co-generation and tri-generation are obvious conjugations
3- sales are an obvious eventuality
Warm Regards,
A.R.
If you can operate the eCat SK so that its output is primarily between 200 and 280 nanometers (UV-C), you could possibly use it for tasks like hospital room sterilization (with the patients and human operator removed). If it was on a robotic platform, it could be programmed to move through certain rooms, extinguishing the output while in occupied corridors and re-activating once within a closed room.
Dear Andrea,
If you would succeed in getting a gas turbine running with Ecat SK’s:
1. Is the main purpose to generate electricity with it?
2. Would you combine them to generate both heat (for heating e.g. buildings) and electricity?
3. Would you then also be willing to sell these as a complete units?
Thank you, kind regards, Gerard
Dear Andrea,
You said that probably in December the first industrialized Ecat will start their heat production. On the theoretical field, when do you think that your work with Carl-Oscar Gullstrom will achieve solid results? Can you also where the experimants will take place?
Godspeed,
Loretta
Frank Acland:
1- Deals are on course, premature to answer
2- So far the answer is yes
3- No
4- To be completed
5- Yes
Thank you for your attention to our work,
Warm Regards,
A.R.
Your reply to Noble Grabow you said you think that you will deliver your first E-Cat products to customers in December.
1. About how many different customers will take delivery of your first batch of E-Cats?
2. Will the first products delivered be E-Cat QX’s
3. Are your first customers all in the USA?
4. Have you finalized the manufacturing system for the first products?
5. Does this mean you expect your production lines will be in operation by the end of November?
Dear Andrea Rossi:
I watched the 6 minutes video of the youtube presentation of the Ecat QX in Stockholm. It merits to be viral.
Thank you, in 6 minutes there is condensed all the essential.
Dear Andrea,
Did you made any progress in adapting the gas turbine to the Ecat SK?
Does the turbine also need to change for this adaptation, or is it just the SK?
Kind regards, Gerard
KJ:
Actually, Quarks are confined in the QCD system, therefore they cannot be separated to calculate their energy. Their mass has been derived from the mass of barions and hadrons and their different cross sections. The mass you cite has been obtained renormalizing the phase transition of the QCD. This method, though, is far from being considerable precise, due to the fact that the Quarks of first generation are below the normal scale of the QCD.
Warm Regards,
A.R.
Dr Rossi,
Talking of Astronomy: did you google “NASA, the sound of the Sun”?
By the way: fantastic and very convincing the video on youtube of your demonstration of the Ecat QX in Stockholm.
Best wishes for your next presentation of the industrialized Ecat,
Gary
Dear Dr Andrea Rossi,
If it is not possible to insulate the Up and Down Quarks, how has it been possible to calculate their mass, that are indicated, respectively, 3 MeV the Up and 6 MeV the Down Quarks?
Thank you if you can answer
Same:
Thank you for the link, interesting indeed; remaining in the Astronomy field: how beautiful yesterday night to observe the red Moon and a Mars so luminescent! It has been for me a very emotional hour.
Warm Regards,
A.R.
Konstantin:
because in Stockholm we presented a 20 W prototype, while the industrialized modules of the Ecat QX have a power of 1 kW, let alone the SK, whose power is higher by order of magnitude.
Warm regards,
A.R.
Dr Andrea Rossi,
The video on youtube ” Ecat QX demonstration in Stockholm November 24 2017″ is very impressive and convincing, but I have a question: why in that case you have been able to use the Ecat in the conference room, while now you say that for the presentation you are going to make in January 2019 you cannot turn on the Ecat live in the conference room?
Cheers
K.
I just watch a TED talk on CO2 removal from air. It seems a common theme in all commercial systems that are available is the high use of heat to remove the CO2 once captured, this is also the major cost of the system. It looks like the Ecat could help to bring down the cost of Carbon Capture. I still believe it is much better not to produce it in the first place but we might need to attack the problems at both ends. See below for the link
Dear Andrea,
About the fact that ENI is utilizing your patent to turn organig wastes into fuel: is it true that in the eighties they paid you 300,000,000 of Italian lire (in real value equivaent to about 2 million Euro of today) to use your technology?
Thank you if you don’t refrain to answer
Dear Andrea Rossi,
Conceptually, could the eCat SK design that currently has a rating of 100kW thermal output be reduced in size say to 10kW or 1kW? My thoughts were for powering a small drone, using an eCat unit to go to thermo-to-electric conversion, with maybe 10% efficiency, one could fly the drone almost indefinitely.
Is there any potential advantage in the SK compared to the QX design at lower output levels?
One application I know of is mapping icebergs as they move into the Atlantic shipping lanes. A job currently done by manned aircraft at some risk to the crews. A very long duration, small drone, with suitable satellite uplink capabilities to send back imagery. would be a valuable asset.
Dear Andrea, are you recruiting people yet to build and/or run your factory? Regards, Abe.
Dr Andrea Rossi:
I watched the youtube video of the test of the Ecat QX made in Stockholm on Nov 24th 2017.
It has been perfect, undisputable the way the water flow has been measured, the way the oscilloscope has measured the energy consumed.
Very convincing.
All the best,
Gino
Faustino Stansell:
Steam.
Warm Regards,
A.R.
Which is the secondary output fluid that better fits the necessity to exchange heat with the highest efficiency with a so small primary source?
Ruby:
In September we will make a series of very important experiments with the Ecat SK and at that point we will know if we have a product, or just a prototype to be worked upon again.
Warm Regards,
A.R.
Mario:
So far, combining consulting fees, instrumentation, invention and making of tools and instruments, experiments, Leonardo Corporation invested in this particular research about 20 000 $, obviously considering zero the cost of my personal work, that can be computed around several hundreds of hours in the last year, since when I had the intuition of the annihilation of virtual Fermions, wrong or correct as it might be.
Warm Regards,
A.R.
Ignacio:
Thank you!
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
I watched the whole 3 hours video on youtube ECAT QX STOCKHOLM DEMONSTRATION NOVEMBER 24 2017 and I am glad I did it: very convincing.
Waiting for the industrial product,
Godspeed
Ignacio
Just to have an idea: how much did you spend for the theoretical work you are making related to the theoretical bases of the so called Rossi Effect?
Dear Andrea,
When will you know if also the Ecat SK will be introduced at the presentation of the industrialized products?
Thanks if you can answer,
Ruby
Frank Acland:
We will make a publication, if there will be substance with sufficient figure of merit.
Warm Regards,
A.R.
Dear Andrea,
Are you planning to share the results of your experimental work with Carl-Oscar Gullstrom with the public, or is this for Leonardo’s internal use only.
Thank you,
Frank Acland
Steven N. Karels:
Thank you for the suggestion.
Warm Regards,
A.R.
Loretta Steinharter:
We have to make important experiments with new instrumentation we are inventing to find evidence of the annihilation of virtual Fermions. I hope and think we will have the instrumentation ready by September/October and eventually we’ll make the job. Probably in Sweden.
Warm Regards,
A.R.
Gerard McEk:
1- electricity generation is surely one of its task
2- co-generation and tri-generation are obvious conjugations
3- sales are an obvious eventuality
Warm Regards,
A.R.
Dear Andrea Rossi,
If you can operate the eCat SK so that its output is primarily between 200 and 280 nanometers (UV-C), you could possibly use it for tasks like hospital room sterilization (with the patients and human operator removed). If it was on a robotic platform, it could be programmed to move through certain rooms, extinguishing the output while in occupied corridors and re-activating once within a closed room.
Dear Andrea,
If you would succeed in getting a gas turbine running with Ecat SK’s:
1. Is the main purpose to generate electricity with it?
2. Would you combine them to generate both heat (for heating e.g. buildings) and electricity?
3. Would you then also be willing to sell these as a complete units?
Thank you, kind regards, Gerard
Dear Andrea,
You said that probably in December the first industrialized Ecat will start their heat production. On the theoretical field, when do you think that your work with Carl-Oscar Gullstrom will achieve solid results? Can you also where the experimants will take place?
Godspeed,
Loretta
Frank Acland:
1- Deals are on course, premature to answer
2- So far the answer is yes
3- No
4- To be completed
5- Yes
Thank you for your attention to our work,
Warm Regards,
A.R.
K:
Moreless, yes.
Warm Regards,
A.R.
Dear Andrea,
Your reply to Noble Grabow you said you think that you will deliver your first E-Cat products to customers in December.
1. About how many different customers will take delivery of your first batch of E-Cats?
2. Will the first products delivered be E-Cat QX’s
3. Are your first customers all in the USA?
4. Have you finalized the manufacturing system for the first products?
5. Does this mean you expect your production lines will be in operation by the end of November?
Thank you very much,
Frank Acland
5.
Dr Andrea Rossi,
Will the 1 MW plant you are going to deliver to sell heat have the same design we can see on http://www.leonardocorporation.com?
Allen:
Thank you for your attention!
Warm Regards,
A.R.
Gerard McEk:
Both of them need modifications. We are working on it.
Warm Regards,
A.R.
Sam:
Thank you for the link, a very interesting projection in the future of telescopes of NASA.
Warm Regards,
A.R.
Joey:
Thank you. For the Readers: you can also find the link on http://www.ecat.com
Warm Regards,
A.R.
Dear Andrea Rossi:
I watched the 6 minutes video of the youtube presentation of the Ecat QX in Stockholm. It merits to be viral.
Thank you, in 6 minutes there is condensed all the essential.
Hello Dr Rossi
This is an interesting video of future telescopes.
https://youtu.be/7x0RpGa_IXA
Regards
Sam
Dear Andrea,
Did you made any progress in adapting the gas turbine to the Ecat SK?
Does the turbine also need to change for this adaptation, or is it just the SK?
Kind regards, Gerard
With thanks! Valuable information on this patent. Under the appearence of a simple heater there is a revolution announced.
Godspeed,
Allen
KJ:
Actually, Quarks are confined in the QCD system, therefore they cannot be separated to calculate their energy. Their mass has been derived from the mass of barions and hadrons and their different cross sections. The mass you cite has been obtained renormalizing the phase transition of the QCD. This method, though, is far from being considerable precise, due to the fact that the Quarks of first generation are below the normal scale of the QCD.
Warm Regards,
A.R.
Jess Mason:
We are thinking about this issue, that is also a bit premature, albeit we received intelligent suggestions.
Warm Regards,
A.R.
Gary Hunt:
Yes, I saw it: very interesting.
Thank you for your kind wishes,
Warm Regards,
A.R.
Dr Rossi,
Talking of Astronomy: did you google “NASA, the sound of the Sun”?
By the way: fantastic and very convincing the video on youtube of your demonstration of the Ecat QX in Stockholm.
Best wishes for your next presentation of the industrialized Ecat,
Gary
Dear Dr Andrea Rossi,
If it is not possible to insulate the Up and Down Quarks, how has it been possible to calculate their mass, that are indicated, respectively, 3 MeV the Up and 6 MeV the Down Quarks?
Thank you if you can answer
Have you decided if you will make or not a direct streaming of the operation of the Ecat at the presentation of your industrialized Ecats?
Sam:
Yes, what really fascinated me is Mars, the way we saw it so close, so bright.
Warm Regards,
A.R.
Hello Dr Rossi
Is this what Dazzeled.
https://youtu.be/PnQgx_qCtfY
Sam
Same:
Thank you for the link, interesting indeed; remaining in the Astronomy field: how beautiful yesterday night to observe the red Moon and a Mars so luminescent! It has been for me a very emotional hour.
Warm Regards,
A.R.
Hello Dr Rossi
This is an interesting video about another inventor.
https://youtu.be/dNG5JgRL3xM
Regards
Sam
Steven N. Karels:
Thank you for your suggestion,
Warm Regards,
A.R.
Anonymous:
Yes, it is correct. In fact they had the right to use my technology.
Warm Regards,
A.R.
Noble Grabow:
Within December, I think.
Warm Regards,
A.R.
Manuel Cilia:
Thank you for the insight and the suggestion,
Warm Regards,
A.R.
Konstantin:
because in Stockholm we presented a 20 W prototype, while the industrialized modules of the Ecat QX have a power of 1 kW, let alone the SK, whose power is higher by order of magnitude.
Warm regards,
A.R.
Dr Andrea Rossi,
The video on youtube ” Ecat QX demonstration in Stockholm November 24 2017″ is very impressive and convincing, but I have a question: why in that case you have been able to use the Ecat in the conference room, while now you say that for the presentation you are going to make in January 2019 you cannot turn on the Ecat live in the conference room?
Cheers
K.
Dear Dr Rossi
I just watch a TED talk on CO2 removal from air. It seems a common theme in all commercial systems that are available is the high use of heat to remove the CO2 once captured, this is also the major cost of the system. It looks like the Ecat could help to bring down the cost of Carbon Capture. I still believe it is much better not to produce it in the first place but we might need to attack the problems at both ends. See below for the link
http://www.youtube.com/watch?v=XY_lzonfE3I
Thank you
Dr Rossi,
When will you deliver the first Ecats to Clients?
Dear Andrea,
About the fact that ENI is utilizing your patent to turn organig wastes into fuel: is it true that in the eighties they paid you 300,000,000 of Italian lire (in real value equivaent to about 2 million Euro of today) to use your technology?
Thank you if you don’t refrain to answer