On January 31st we will watch your demonstration from many places in the world.
In the information you will deliver a few days before could you include GMT in addition to local time?
All my encouragement to your work
Best regards
Dear Andrea,
Sad to read you had lost the voice and inspiring the fact that you did not stop your work.
Thank you for your tremendous work, we need it.
Cheers
Bruno
Mr Rossi,
Will it be possible to send you questions during the direct streaming and have answers still in direct streaming during the Ecat SK presentation on January 31st?
Thank you if you can answer,
All the best,
Francisco
Daron Wirebaugh:
Health is better, voice is returned. After my last surgery in July I lost the voice and was afraid not to recover it; I communicated with my collaborators writing, not being able to speak and this was a problem. Luckily after an intense logopedy the voice returned two days ago and now I can speak again. Fortunately this did not stop my work.
No tennis today: unfortunately in this period my wife has to be in Italy, while I am here in Miami. She will be back soon.
Thank you for your kind concern.
Warm Regards,
A.R.
Yrka:
1- I do not know
2- I got oscilloscopes, spectrometers, thermochambers, lasers, frequency generators and other parafernalia, but not cristal balls
Warm Regards,
A.R.
Your theory explaining the processes that create the Rossi Effect will, to some extent, change nuclear physics.
1. In your opinion, exactly these processes occur in the core of the planet and in the depths of the sun?
2. In addition to obtaining energy, it is possible in the future, using the reactions you have discovered for obtaining elements and isotopes?
Dr Andrea Rossi,
I suggest this measurement on Jan 31st: jet water inside the reactor of the SK, measure amount of water and temperature of steam at the output, collect under the reactor the non vaporized and condensed water. If I have understood how the Ecat SK works, this is the best way to measure the energy produced. This is what we did where I worked.
Best regards,
JPR
Dear Dr. Rossi,
I agree 100% with the recommendations made by Steven N. Karels in his 11/11/2018 postings on the instrumentation that should be used for your January demonstration. My guess is that you have already taken measurements exactly as he is recommending. Are there any differences in how you are measuring the performance of the SK E-Cat from what he stated? If there are differences, what are those differences?
I am certainly looking forward to seeing the results of your January demonstration!
Dr. Mike
I understand the January 2019 event will not be a scientific demonstration but a commercial service demonstration. Consequently, the purpose is not to demonstrate and validate the technology but to show a potential customer or customers how well the system performs (output thermal power versus input electrical power).
The electrical input can be measured using a single phase AC power meter. A means of demonstrating that it is reasonably accurate would be advised. Possible ways include one or more switchable dummy loads of known or calculated power dissipation. You might also include an analog AC Ammeter and an analog AC Voltmeter to show the AC power meter results are consistent.
I understand you are using flowing water with no phase change. This requires a measurement of the flow rate (e.g., liters per minute) and input and output temperatures. Some form of independent temperature measurement is suggested.
I recall in your early demonstrations you used a container and a scale to capture water flow and weighed the output water over time to compute the water flow rate, by knowing the water density. A simply thermometer(s) to measure the input and output water temperatures in addition to your digital temperature sensors would form an independent means of verification.
I suggest that all cabling be visible and nothing is hidden from sight. Water comes from the “house plumbing”, perhaps an additional faucet to dump water into a container to allow a independent temperature measurement. The output (heated) water should be directed into a storage container and independently have its temperature measured and, periodically weighed. The container would need to be occasionally emptied but keep in mind the water will be hot, perhaps 40C to 80C, so safety is a concern.
Most of all, keep it simple. Measure the input power. Measure the output power. No secrets, no configuration changes during the demonstration. Best luck on the demonstration.
Abe Vincent:
For the time being we will limit our action to the sale of heat, with remote control of the plants made by us, to maintain full control of the technology and be responsible of the operation in this initial phase. About the pond: we are looking for the oceans.
Warm Regards,
A.R.
So the primary purpose of the event in January is to advertise the launch of your heating service to the world? Or will marketing be limited to just the USA/Canada initially? Energy costs in the UK (and the rest of Europe) are higher than in the USA so there might be more interest this side of the pond.
May I ask if the event in January will demonstrate it he operation with higher temperature outputs greater than 100 deg C for example 400 or 600 deg C? Or if like the Stockholm event use a fluid output below 100 deg C?
I don’t want to pre empt the purpose of the event so if you prefer to leave the release of information to the event it self I understand.
Similarly I wonder if you can tell us more regarding the device parameters and thermal exchange fluid usage parameter constraints either before or during your event?
If you prefer to wait until the event. Can we raise the questions directly during your presentation. Or would you prefer us to use an intermediary for efficiency? Or both.
John C Evans:
Thanks to you for your kind attention to the work of our team.
The aim of the January 31st presentation is not to get a validation. We are presenting a service that is based on an industrial production, not on a prototype that needs to be validated. The goal of the presentation is commercial, not scientific and has to be object of clear distinction from a work of R&D, that we continue to do, and of theoretical study, that we continue to do.
We are prepared to answer the questions we will receive: any kind of questions.
Warm Regards,
A.R.
Dear Andrea:
Do you expect that the January demonstration will be a validation of your work with enough coverage to excite the alternate energy community? Should this happen are you prepared for the media circus that will follow?
Good luck and thank you.
John C Evans
Prof:
Next week a thoroughly series of experiments oriented toward the theoretical bases of the effect, and the results will be communicated to all the members that are working with me upon theoretical issues; the last week of November and during December our Clients will visit us to see the SK in operation and define details.
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
Will it be possible to put questions to you during the presentation you will make on January 31st in streaming?
Carissimi saluti,
Roberto
Dear Andrea,
I just want to tell you that we are inspired by your unbelievable progress made in these last years, notwithstanding all the force employed against you and your team by your enemies and their trolls.
Godspeed,
a silent majority member
Dr Andrea Rossi,
Did your oscilloscopes have damages caused by the electromagnetic fields exiting the Ecat?
Thank you if you can answer, it is an information that is useful for my job, if you can.
All the best,
Nicole
All of your supporters and I are looking forward to seeing the SK run on January 31 and wish E-CAT a great commercial success.
Can you tell us if the E-CAT assembly of your first customer has started? If not, can you tell us when the assembly will begin?
All my support for your work and long live E-CAT
Best regards
Ruby:
No, because now we are at the industrialization phase. The “validation” is made by the Customers. This said, our R&D activity obviously will continue, as it happens for any industrial product, as well as we will continue our strong effort in the theoretical field related to our technology.
Warm Regards,
A.R.
Raffaele Bongo:
Of course!
Warm Regards,
A.R.
KeithT:
Yes.
Warm Regards,
A.R.
Chuck Davis:
Could be.
Warm Regards,
A.R.
Dear Andrea,
your gas turbine 20 kW Ecat SK looks fit for a residential generator.
Warm Regards,
Chuck Davis
Dear Andrea,
You have confirmed that the January test will demonstrate a production line produced Ecat SK.
Will you also be demonstrating a market ready control panel that has been sourced through your supply chain?
Regards,
Keith Thomson.
Hello A. Rossi
On January 31st we will watch your demonstration from many places in the world.
In the information you will deliver a few days before could you include GMT in addition to local time?
All my encouragement to your work
Best regards
Raffaele
Bruno ( Wease ):
Thank you for your attention to the work of our Team!
Warm Regards,
A.R.
Bruno:
Yes, it will be possible to send emails, we will read the questions and give the answers.
Warm Regards,
A.R.
Do you think the video of the Ecat SK in operation will be really interesting? I mean, will it contain something never seen before?
Cheers
Bruno
Dear Andrea,
Sad to read you had lost the voice and inspiring the fact that you did not stop your work.
Thank you for your tremendous work, we need it.
Cheers
Bruno
Mr Rossi,
Will it be possible to send you questions during the direct streaming and have answers still in direct streaming during the Ecat SK presentation on January 31st?
Thank you if you can answer,
All the best,
Francisco
KeithT:
The module of the Ecat SK now is 20 kW. There is potential to grow up.
Warm Regards,
A.R.
JPR:
Thank you for your suggestion,
Warm Regards,
A.R.
Daron Wirebaugh:
Health is better, voice is returned. After my last surgery in July I lost the voice and was afraid not to recover it; I communicated with my collaborators writing, not being able to speak and this was a problem. Luckily after an intense logopedy the voice returned two days ago and now I can speak again. Fortunately this did not stop my work.
No tennis today: unfortunately in this period my wife has to be in Italy, while I am here in Miami. She will be back soon.
Thank you for your kind concern.
Warm Regards,
A.R.
Yrka:
1- I do not know
2- I got oscilloscopes, spectrometers, thermochambers, lasers, frequency generators and other parafernalia, but not cristal balls
Warm Regards,
A.R.
Sam:
Thank you, interesting.
Warm Regards,
A.R.
Thought this article would interest you
Dr Rossi
https://phys.org/news/2018-11-two-atom-quantum-duet.html
Regards
Sam
Dear Dr. Andrea Rossi.
Your theory explaining the processes that create the Rossi Effect will, to some extent, change nuclear physics.
1. In your opinion, exactly these processes occur in the core of the planet and in the depths of the sun?
2. In addition to obtaining energy, it is possible in the future, using the reactions you have discovered for obtaining elements and isotopes?
Yury Isaev
Engineer
Tyumen, Russia.
Dear Andrea:
How is your health?
Today tennis with your wife?
God bless you for the work you are doing,
Daron
Dr Andrea Rossi,
I suggest this measurement on Jan 31st: jet water inside the reactor of the SK, measure amount of water and temperature of steam at the output, collect under the reactor the non vaporized and condensed water. If I have understood how the Ecat SK works, this is the best way to measure the energy produced. This is what we did where I worked.
Best regards,
JPR
Dear Andrea,
For the gas turbine combustion chambers that you are developing, how much thermal kW will be installed in a chamber?
Regards,
Keith Thomson.
Dr Mike:
Thank you for your opinion.
Our presentation will be known on January 31st.
Warm Regards,
A.R.
Dear Dr. Rossi,
I agree 100% with the recommendations made by Steven N. Karels in his 11/11/2018 postings on the instrumentation that should be used for your January demonstration. My guess is that you have already taken measurements exactly as he is recommending. Are there any differences in how you are measuring the performance of the SK E-Cat from what he stated? If there are differences, what are those differences?
I am certainly looking forward to seeing the results of your January demonstration!
Dr. Mike
Steven N. Karels:
Thank you for your suggestions.
Warm Regards,
A.R.
Italo R.:
Thank you for your sustain to the work of our Team.
Warm Regards,
A.R.
Isidro:
Yes.
I think Dr Parkhomov and his team are making a serious job.
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
Did you see the last publications of Dr Alexander Parkhomov and his new Team? If yes, what is your opinion?
“…About the pond: we are looking for the oceans…”
I like it! To be written in history books.
Kind regards,
Italo R.
Dear Andrea Rossi,
I understand the January 2019 event will not be a scientific demonstration but a commercial service demonstration. Consequently, the purpose is not to demonstrate and validate the technology but to show a potential customer or customers how well the system performs (output thermal power versus input electrical power).
The electrical input can be measured using a single phase AC power meter. A means of demonstrating that it is reasonably accurate would be advised. Possible ways include one or more switchable dummy loads of known or calculated power dissipation. You might also include an analog AC Ammeter and an analog AC Voltmeter to show the AC power meter results are consistent.
I understand you are using flowing water with no phase change. This requires a measurement of the flow rate (e.g., liters per minute) and input and output temperatures. Some form of independent temperature measurement is suggested.
I recall in your early demonstrations you used a container and a scale to capture water flow and weighed the output water over time to compute the water flow rate, by knowing the water density. A simply thermometer(s) to measure the input and output water temperatures in addition to your digital temperature sensors would form an independent means of verification.
I suggest that all cabling be visible and nothing is hidden from sight. Water comes from the “house plumbing”, perhaps an additional faucet to dump water into a container to allow a independent temperature measurement. The output (heated) water should be directed into a storage container and independently have its temperature measured and, periodically weighed. The container would need to be occasionally emptied but keep in mind the water will be hot, perhaps 40C to 80C, so safety is a concern.
Most of all, keep it simple. Measure the input power. Measure the output power. No secrets, no configuration changes during the demonstration. Best luck on the demonstration.
Abe Vincent:
For the time being we will limit our action to the sale of heat, with remote control of the plants made by us, to maintain full control of the technology and be responsible of the operation in this initial phase. About the pond: we are looking for the oceans.
Warm Regards,
A.R.
So the primary purpose of the event in January is to advertise the launch of your heating service to the world? Or will marketing be limited to just the USA/Canada initially? Energy costs in the UK (and the rest of Europe) are higher than in the USA so there might be more interest this side of the pond.
Stephen:
The T will be higher.
For all the rest, let’s wait for the presentation.
Warm Regards,
A.R.
Dear Andrea
May I ask if the event in January will demonstrate it he operation with higher temperature outputs greater than 100 deg C for example 400 or 600 deg C? Or if like the Stockholm event use a fluid output below 100 deg C?
I don’t want to pre empt the purpose of the event so if you prefer to leave the release of information to the event it self I understand.
Similarly I wonder if you can tell us more regarding the device parameters and thermal exchange fluid usage parameter constraints either before or during your event?
If you prefer to wait until the event. Can we raise the questions directly during your presentation. Or would you prefer us to use an intermediary for efficiency? Or both.
Thanks and Best Regards.
Looking forward to it now.
Stephen
John C Evans:
Thanks to you for your kind attention to the work of our team.
The aim of the January 31st presentation is not to get a validation. We are presenting a service that is based on an industrial production, not on a prototype that needs to be validated. The goal of the presentation is commercial, not scientific and has to be object of clear distinction from a work of R&D, that we continue to do, and of theoretical study, that we continue to do.
We are prepared to answer the questions we will receive: any kind of questions.
Warm Regards,
A.R.
Dear Andrea:
Do you expect that the January demonstration will be a validation of your work with enough coverage to excite the alternate energy community? Should this happen are you prepared for the media circus that will follow?
Good luck and thank you.
John C Evans
Prof:
Next week a thoroughly series of experiments oriented toward the theoretical bases of the effect, and the results will be communicated to all the members that are working with me upon theoretical issues; the last week of November and during December our Clients will visit us to see the SK in operation and define details.
Warm Regards,
A.R.
Silent Majotity Member:
Thank you for your sustain from our Team!
Warm Regards,
A.R.
Robarto:
Yes,
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
Will it be possible to put questions to you during the presentation you will make on January 31st in streaming?
Carissimi saluti,
Roberto
Dear Andrea,
I just want to tell you that we are inspired by your unbelievable progress made in these last years, notwithstanding all the force employed against you and your team by your enemies and their trolls.
Godspeed,
a silent majority member
Can you give some information about the main events relate to the Ecat from now to the January 31st presentation?
Harvey:
This does not depend on me.
Warm Regards,
A.R.
Dear Andrea,
Is it possible that we might see a formal introduction of your partner at the January presentation?
Raffaele Bongo:
Thank you for your kind support.
The assembly will start at the beginning of the year 2019.
Warm Regards,
A.R.
Sam:
Thank you for the information,
Warm Regards,
A.R.
Nicole Mawrey:
No, but I suggest you to put a barrier between the O.S. and the source of e.m. fields.
Warm Regards,
A.R.
Dr Andrea Rossi,
Did your oscilloscopes have damages caused by the electromagnetic fields exiting the Ecat?
Thank you if you can answer, it is an information that is useful for my job, if you can.
All the best,
Nicole
Hello A. Rossi
All of your supporters and I are looking forward to seeing the SK run on January 31 and wish E-CAT a great commercial success.
Can you tell us if the E-CAT assembly of your first customer has started? If not, can you tell us when the assembly will begin?
All my support for your work and long live E-CAT
Best regards
Raffaele
Hello Dr Rossi
This is a video about producing electricity
from waste heat.
https://youtu.be/1W8ruajbrGY
Regards
Sam
Ruby:
No, because now we are at the industrialization phase. The “validation” is made by the Customers. This said, our R&D activity obviously will continue, as it happens for any industrial product, as well as we will continue our strong effort in the theoretical field related to our technology.
Warm Regards,
A.R.