@eernie1 asks for readers experiences of climate change. Here in southern England we have about half the snow days now compared to when I was a child in the 1960s and 70s. This is supported by data from the UK Met office.
Dr Rossi,
I did not inderstand: are you working to invent a new kind of P.V. or to invent a new system to generate electricity directly from the reactor we saw on http://www.ecatskdemo.com ?
Have you considered a future application for the eCat-SK of space travel via photon thrust? Consider an eCat-SK emitting light which then reflects off a concave mirror to direct the eCat-SK generated light to the rear of the spacecraft. This would be similar to a solar sail but the force would be independent of the distance away from the Sun. Conceptually, a band of photovoltaic cells around the transverse axis of the eCat-SK would generate the power to control the eCat-SK reaction while longitudinal axis generated light would be directed to strike a highly reflective mirror to reflect the light to the rear of the spacecraft and thus generate forward thrust. The eCat-SK generated light provides the momentum change needed to accelerate the spacecraft and would result in an exceeding high specific impulse. The radiation pressure is related to the intensity of the light being emitted divided by the speed of light. The effective pressure can be doubled by perfect reflection over absorbed or open emission. Thoughts?
Regarding the question of Katia Spruel,
maybe you are putting RF pulses into the charge and you hope to have a rf pulse back of higher energy? The normal magnetic resonance behaviour would be having back an RF pulse of lower or at least equal energy, but maybe the ECat can act as an energy amplifier?
Dear Dr Rossi,
You will appreciate this recent report from “Dr Gabe Mirkin’s Fitness & Health Newsletter” that states that of all forms of exercise, tennis players live the longest.
If I remember well you wrote you had a customer with an order of a total of 40 MW to supply with heat.
1) is this power already partialy ou fully supplied to this customer ?
2) if partialy or fully supplied, is your customer happy with the qualty of what is supplied ?
3) are they happy with the financial savings ?
4) is there any chance they will openly publicize their satisfaction before one year ?
Many thanks if you can answer,
Best wishes and good luck
FM
Dear Andrea,
NASA data showed that world temps dropped by 1/2 degree C from 2016-2017. Antarctica ice mass increased. This due to solar activity. We may need your heat sooner than we thought. Little ice age on its way. Empirically I have noticed, in my 88 years, no obvious change in climate direction. People who are crying wolf should rethink their stance on global warming. If any of your readers have noticed any change in climate temperatures during their lifetimes, I would appreciate telling me their experiences for my information. This is off topic but may have some bearing on your decision for future development of your device.
Regards
Italo R.:
What the rock and troll music says is not an issue. I understand that our friends and sustainers are anxious to know more about our Clients and sooner or later this will happen.
Warm Regards,
A.R.
I have noticed lately more comments are answered either “it is NDA”, “please refer to/read, I can’t answer now or .… etc.”. I know you enjoy answering most of these comments perceiving many are new followers to your technology or, like myself, unaware the answer may be found elsewhere. Being as busy as you have been (always), would it be more effective to avoid redundancy by providing a few guidelines at the top of the comment section a list of criteria, suggestions or directions to follow prior to entering one’s comment? Or, as in the past, ‘F8’ (auto reply function key) may work. 😊
I’m constantly amazed of your and your team’s progress to give this world hope and a better place to live. God bless.
As always with much respect,
Brokeeper
Whilst looking at and trying to understand the spectrum from the January Presentation ( http://www.ecatskdemo.com ) I had some probably wild thoughts about what signatures it might contain. I respect you maybe can’t talk about the details about that spectrum. However it led me down a path that gives me some ideas that are maybe for use of PV technology..
Since those thoughts originated with your spectrum I thought I should share them with you.
1. The first of these is what I mentioned yesterday about integrating with metal halide curing lamp technology these lamps shift the UVA spectrum for mercury vapor lamps to more useful and manageable longer wavelengths. And include compounds such as Iron Halide, Galium Halide etc. they are used to stimulate certain frequencies useful for curing. I suppose the UV from the e-Cat SK could be similarly converted.
2. Vanadium is apparently very responsive in the region of interest.
3. Vanadium doped Titanium Oxide can be used to further extend the spectrum down to optical wavelengths particularly useful to agriculture etc.
4. Vanadium Oxide is a known material used for smart glass that can insulate from IR. Is reflective above a certain temperature and transparent bellow that temperature. This reflective/ transparent property can be switched on an off by applying an electrical current!. It very interesting.
5. Yesterday I suggested putting the Metal Halide and perhaps by implication the nano particles Vanadium doped Titanium Oxide in a bulb surrounding the e-cat. But if the concept works then perhaps it could also be enabled with coatings on the PV cells.
Rather than finding a PV cell that’s sensitive to UV it would then just be a matter of matching the fluorescence with the optimum sensitivity frequency of the PV cell.
Perhaps rather than a flat PV surface say textured surface of micro rods would be optimum at capturing fluorescent light generated at the surface. Perhaps a reflective surface would transparent to UV but reflective to longer wavelengths would trap and reflect the fluorescent light radiated set from the coating back towards the cell. It would also maybe insulate the cell from heating from IR.
Thanks for sharing the spectrum and allowing the thoughts it provokes. I hope these thoughts give something back
Another idea would be to approach companies making OV cells for satellites. These are used out side the atmosphere do may be better suited to UV environment. I have no idea what optimisatiind they make but they may have some good ideas.
Dear Dr. Rossi,
in your recent posts, you are saying that you are already working with your Customers and that you are under NDA therefore, rightly, you can not give any information about them.
I am sure you are aware of how much interest there is on this whole affair by all those who are following you for so many years.
There are many blogs in which some write: “So much chatter, no visible results, so the E-Cat does not exist.”.
Others say: “It is necessary to wait for at least one client to show up, and it can also take a long time.”
I know that these opinions do not interest you at all, while you are working according to your plans.
But here, in the world of those who follow you, there is all a ferment of impatient expectation.
Dear Andrea,
From your answers I understand that what you are doing to make electricity is not a P.V., but something that makes e.m. directly from the core of the reactor. Am I right?
Katia
P.S.
I appreciated your wishes of yesterday
You think about PV, is it something like a mini sun surrounded by PV.
The minisun fine tuned to the most optimal wavelength for the PV electro conversion?
Michel:
Thank you for the suggestion. I think we are doing well and as fast as possible.
Obviously I cannot give information about the agreements on course, because I am bound by NDAs.
Warm Regards,
A.R.
If so and it can be down converted to optical wave lengths it could enable a wide range of other technologies too. From agriculture to conventional lighting sources etc.
I wonder if you put the ECat SK in side another larger bulb that contains metal halides if it would act as a stimulating UV source in that bulb that could be down converted to managegable or specifically matched or useful wave lengths by the metal halide.. Perhaps this could be better matched to existing PV technology and also perhaps allow its usage for UV curing lamps and screen printing technologies.
The impact of climate change will grow, with all the consequences that everyone knows well now. There is little time left for humanity to avoid reaching critical thresholds:
Dr. Rossi, do not you feel a certain duty, to deploy your technology massively and quickly?
From my point of view, the best way to achieve this goal would be to sell your patents to a leading manufacturer as it is done every day in the world of biotechnology.
Regards,
Bob Belovich:
We will not change the dimensions of the modules for the time being.
It is not possible to make a hand- held Ecat so far.
Warm Regards,
A.R.
Colin Watters:
This appears to be in contradiction with the comment about New England…
Warm Regards,
A.R.
Colin Watters:
Interesting,
Warm Regards,
A.R.
Dear Andrea,
@eernie1 asks for readers experiences of climate change. Here in southern England we have about half the snow days now compared to when I was a child in the 1960s and 70s. This is supported by data from the UK Met office.
Dear Andrea, the NASA report @eernie1 refers to can be found here.
https://www.nasa.gov/feature/goddard/nasa-study-mass-gains-of-antarctic-ice-sheet-greater-than-losses
In some parts snow fall is increasing but in others it’s decreasing. They point out that the overall it’s increasing but perhaps not for much longer.
Dr Rossi,
I did not inderstand: are you working to invent a new kind of P.V. or to invent a new system to generate electricity directly from the reactor we saw on http://www.ecatskdemo.com ?
Dear Andrea,
Why didn’t you considr the Van Der Waals force in your paper http://www.researchnet.net/publication/330601653_E-Car_SK_and_long_range_particle_interactions
Cheers,
Michael
Dear Andrea Rossi,
Have you considered a future application for the eCat-SK of space travel via photon thrust? Consider an eCat-SK emitting light which then reflects off a concave mirror to direct the eCat-SK generated light to the rear of the spacecraft. This would be similar to a solar sail but the force would be independent of the distance away from the Sun. Conceptually, a band of photovoltaic cells around the transverse axis of the eCat-SK would generate the power to control the eCat-SK reaction while longitudinal axis generated light would be directed to strike a highly reflective mirror to reflect the light to the rear of the spacecraft and thus generate forward thrust. The eCat-SK generated light provides the momentum change needed to accelerate the spacecraft and would result in an exceeding high specific impulse. The radiation pressure is related to the intensity of the light being emitted divided by the speed of light. The effective pressure can be doubled by perfect reflection over absorbed or open emission. Thoughts?
Juliana McOwen:
Thank you!
Warm Regards,
A.R.
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today on other posts of this blog,
Warm Regards,
A.R.
Eernie1:
This is intriguing. I hope our Readers will contribute.
Warm Regards,
A.R.
I like this blog very much so much great information about LENR.
Thank you,
Juliana
Frederic Maillard:
1- partially
2- yes
3- yes
4- maybe
Warm Regards,
A.R.
Iggy Dalrymple:
Thank you!
Warm Regards,
A.R.
Please go to
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
There is well explained why this peak is very important . See in particular the par. 4
Warm Regards,
A.R.
Marco:
Thank you for your insight, I cannnot comment in positive or in negative.
Warm Regards,
A.R.
Regarding the question of Katia Spruel,
maybe you are putting RF pulses into the charge and you hope to have a rf pulse back of higher energy? The normal magnetic resonance behaviour would be having back an RF pulse of lower or at least equal energy, but maybe the ECat can act as an energy amplifier?
Magnetic regard,
Marco.
I watched http://www.ecatskdemo.com
What does the 437.2 peak mean?
Dear Dr Rossi,
You will appreciate this recent report from “Dr Gabe Mirkin’s Fitness & Health Newsletter” that states that of all forms of exercise, tennis players live the longest.
http://www.drmirkin.com/fitness/how-exercise-prolongs-your-life.html
Best regards,
Iggy
Dear Dr Rossi,
If I remember well you wrote you had a customer with an order of a total of 40 MW to supply with heat.
1) is this power already partialy ou fully supplied to this customer ?
2) if partialy or fully supplied, is your customer happy with the qualty of what is supplied ?
3) are they happy with the financial savings ?
4) is there any chance they will openly publicize their satisfaction before one year ?
Many thanks if you can answer,
Best wishes and good luck
FM
Dear Andrea,
NASA data showed that world temps dropped by 1/2 degree C from 2016-2017. Antarctica ice mass increased. This due to solar activity. We may need your heat sooner than we thought. Little ice age on its way. Empirically I have noticed, in my 88 years, no obvious change in climate direction. People who are crying wolf should rethink their stance on global warming. If any of your readers have noticed any change in climate temperatures during their lifetimes, I would appreciate telling me their experiences for my information. This is off topic but may have some bearing on your decision for future development of your device.
Regards
Italo R.:
What the rock and troll music says is not an issue. I understand that our friends and sustainers are anxious to know more about our Clients and sooner or later this will happen.
Warm Regards,
A.R.
Stephen:
Thank you for your insight and suggestions.
Warm Regards,
A.R.
Brokeeper:
Thank you for your kind comment: unfortunately there is information I cannot give and I’m sorry for that. I always try to give as much as I can, as clearly put in evidence by my last paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Warm Regards,
A.R.
Sam:
Thank you for your smart comment,
Warm Regards,
A.R.
Hello DR Rossi
You acknowledged Woman’s day and
say you are working with smart people.
This is a link to ten smart woman.
https://www.wired.com/story/10-women-science-tech-household-names/
Regards
Sam
Dear Andrea,
I have noticed lately more comments are answered either “it is NDA”, “please refer to/read, I can’t answer now or .… etc.”. I know you enjoy answering most of these comments perceiving many are new followers to your technology or, like myself, unaware the answer may be found elsewhere. Being as busy as you have been (always), would it be more effective to avoid redundancy by providing a few guidelines at the top of the comment section a list of criteria, suggestions or directions to follow prior to entering one’s comment? Or, as in the past, ‘F8’ (auto reply function key) may work. 😊
I’m constantly amazed of your and your team’s progress to give this world hope and a better place to live. God bless.
As always with much respect,
Brokeeper
Dear Andrea
Whilst looking at and trying to understand the spectrum from the January Presentation ( http://www.ecatskdemo.com ) I had some probably wild thoughts about what signatures it might contain. I respect you maybe can’t talk about the details about that spectrum. However it led me down a path that gives me some ideas that are maybe for use of PV technology..
Since those thoughts originated with your spectrum I thought I should share them with you.
1. The first of these is what I mentioned yesterday about integrating with metal halide curing lamp technology these lamps shift the UVA spectrum for mercury vapor lamps to more useful and manageable longer wavelengths. And include compounds such as Iron Halide, Galium Halide etc. they are used to stimulate certain frequencies useful for curing. I suppose the UV from the e-Cat SK could be similarly converted.
2. Vanadium is apparently very responsive in the region of interest.
3. Vanadium doped Titanium Oxide can be used to further extend the spectrum down to optical wavelengths particularly useful to agriculture etc.
4. Vanadium Oxide is a known material used for smart glass that can insulate from IR. Is reflective above a certain temperature and transparent bellow that temperature. This reflective/ transparent property can be switched on an off by applying an electrical current!. It very interesting.
5. Yesterday I suggested putting the Metal Halide and perhaps by implication the nano particles Vanadium doped Titanium Oxide in a bulb surrounding the e-cat. But if the concept works then perhaps it could also be enabled with coatings on the PV cells.
Rather than finding a PV cell that’s sensitive to UV it would then just be a matter of matching the fluorescence with the optimum sensitivity frequency of the PV cell.
Perhaps rather than a flat PV surface say textured surface of micro rods would be optimum at capturing fluorescent light generated at the surface. Perhaps a reflective surface would transparent to UV but reflective to longer wavelengths would trap and reflect the fluorescent light radiated set from the coating back towards the cell. It would also maybe insulate the cell from heating from IR.
Thanks for sharing the spectrum and allowing the thoughts it provokes. I hope these thoughts give something back
Another idea would be to approach companies making OV cells for satellites. These are used out side the atmosphere do may be better suited to UV environment. I have no idea what optimisatiind they make but they may have some good ideas.
Best Regards
Stephen
Dear Dr. Rossi,
in your recent posts, you are saying that you are already working with your Customers and that you are under NDA therefore, rightly, you can not give any information about them.
I am sure you are aware of how much interest there is on this whole affair by all those who are following you for so many years.
There are many blogs in which some write: “So much chatter, no visible results, so the E-Cat does not exist.”.
Others say: “It is necessary to wait for at least one client to show up, and it can also take a long time.”
I know that these opinions do not interest you at all, while you are working according to your plans.
But here, in the world of those who follow you, there is all a ferment of impatient expectation.
Kind Regards,
Italo R.
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published in other posts of this blog,
Warm Regards,
A.R.
Frank Acland:
I am working on the production of electricity with the help of very good brains and I am learning.
Warm Regards,
A.R.
Dave Gothier:
I am under NDA.
Warm Regards,
A.R.
Marco:
It is just another way to study.
Warm Regards,
A.R.
Katia Spruel:
Maybe,
Warm Regards,
A.R.
Dear Andrea,
From your answers I understand that what you are doing to make electricity is not a P.V., but something that makes e.m. directly from the core of the reactor. Am I right?
Katia
P.S.
I appreciated your wishes of yesterday
Caro Andrea…
A proposito dei magneti attorno all’E-Cat… Mi fischiano le orecchie…
Saluti…
Dear Dr Andrea Rossi:
So you confirm you have on course a deal with a major global company for the global distribution of your technology?
Thanks if you can answer.
Congratulations also for your momentous paper on Researchgate
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Sailmenn,
The corollary to your question is whether the photovoltaic could be fine tuned to match the output of the eCat-SK?
Dear Andrea,
Are you working on the PV E-Cat by yourself, or with people who have experience expertise in the photovoltaics field?
Thank you,
Frank Acland
Chuck Davis:
Thank you for the information,
Warm Regards,
A.R.
Sailmenn:
I do not know.
Warm Regards,
A.R.
You think about PV, is it something like a mini sun surrounded by PV.
The minisun fine tuned to the most optimal wavelength for the PV electro conversion?
Dr Rossi,
Maybe here you can find interesting technology:
http://www.novasolix.com
Warm Regards,
Chuck Davis
Michel:
Thank you for the suggestion. I think we are doing well and as fast as possible.
Obviously I cannot give information about the agreements on course, because I am bound by NDAs.
Warm Regards,
A.R.
Stephen:
Again thank you for the second suggestion,
Warm Regards,
A.R.
Stephen:
Thank you for the suggestion,
Warm Regards,
A.R.
If so and it can be down converted to optical wave lengths it could enable a wide range of other technologies too. From agriculture to conventional lighting sources etc.
I wonder if you put the ECat SK in side another larger bulb that contains metal halides if it would act as a stimulating UV source in that bulb that could be down converted to managegable or specifically matched or useful wave lengths by the metal halide.. Perhaps this could be better matched to existing PV technology and also perhaps allow its usage for UV curing lamps and screen printing technologies.
Just an idea. Maybe a wild one.
Dear Dr Rossi,
The impact of climate change will grow, with all the consequences that everyone knows well now. There is little time left for humanity to avoid reaching critical thresholds:
Dr. Rossi, do not you feel a certain duty, to deploy your technology massively and quickly?
From my point of view, the best way to achieve this goal would be to sell your patents to a leading manufacturer as it is done every day in the world of biotechnology.
Regards,
Michel
Bob Belovich:
We will not change the dimensions of the modules for the time being.
It is not possible to make a hand- held Ecat so far.
Warm Regards,
A.R.
Steven N. Karels:
I agree,
Warm Regards,
A.R.