Domenico Canino:
I am not able to answer. So far we are not organized to work in Italy, but sooner or later we must serve in all the Countries, therefore also in Italy. I perfectly know I have many wonderful friends in your Country.
Warm Regards,
A.R.
dear Andrea, when will we see an ecat SK installed and operating in Italy? I know there has been great hostility towards you, but not all Italians are the same.
Dear Andrea,
Hearing you have delivered plants to customers is reason for a great compliment. You are probably the first company actually employing LENR as a commercial product on a large scale, congratulations!
No doubt you are getting feedback of your plants. Some questions, if I may:
1. Is the COP as expected?
2. Can you give average operational figures of this COP?
3. Are you happy with the automatically produced E-Cats SK?
4. Are you still much involved in producing E-cats, or is your focus more on innovations like direct electricity production and E-Cat -jet/turbine combinations?
5. Now you are actually producing, the numbers of employers must have risen. How many employees are now working for the Leonardo company?
All the best!
Thanks and and kind regards, Gerard
Just a follow-up on my previous question. For clarity, could you answer:
c) Are new E-Cats already operating with new customers (not including the first customer you have already mentioned?)
d) From how many countries have orders been received so far?
a) Are you already building the E-Cats that have been ordered?
b) Are you already installing the E-Cats that have been ordered?
c) Are new E-Cats already operating with new customers (not including the first customer you have already mentioned?)
d) From how many countries have orders been received so far?
Congratulations for the work you are doing for the very important direct production of electricity.
Questions:
1- did you get orders also from other customers apart your partner?
2- are you still working to make 100 kW modules?
3- are you making preliminary studues for 1 MW modules?
Thank you and good luck,
Jimr
can you tell us the order of magnitude of the electrical power you are currently able to extract from the eCAT-SK: tens, hundreds or thousands of Watts ?
Thanks if you can respond.
My best wishes for the eCAT EH (Electricity & Heat) !
If you are not already doing so, please consider quartz for the enclosure or window for the eCat-SD. It can have excellent transmission characteristics in the UV range, depending on the manufacturer.
Steven N. Karels:
No, but I never noticed the glasses of my windows to turn violet after years of exposition to direct sunlight: looking right now to the window in front of me, it is years old and it doesn’t show any violet spot, albeit it is exposed to direct sunlight many hours per day.
Warm Regards,
A.R.
I recall that window glass turns violet after years of exposure to direct sunlight because of the UV content. Will you have a similar problem with the optical window on the eCat-SK?
Warren:
First and foremost, the most important peer reviewed publication of mine has been the US Patent 9,115,913 B1
USPTO publications of granted patents are the more difficult to obtain publications: they are peer reviewed by at least two specialists of the specific matter and the industrial implications of the US Patents are by orders of magnitude more important than any other peer reviewed publication.
To obtain an US Patent is very difficult, especially in our field. The peer reviewing of the USPTO is by far the most severe existing, for the obvious implications it has.
I made many failed attempts and many corrections before obtaining, after many years of errors and trials, my US Patent.
All the other publications of mine, also the ones with my co-authors, are listed shown on Researchgate. Just google “Researchgate Andrea Rossi”
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
I am following your work since the year 2011 and I hope the Ecat will serve a better world to my two children.
I think the Ecat coupled with a Sterling engine could be useful in trasportation.
Question: how much time will be necessary before a global diffusion of the domestic Ecat? Months? Years? Decades?
Raffaele Bongo:
Obviously what you watched is a conventional representation of a proton like a sphere containing three smaller spheres ( like three tennis balls – today I lost again 6-0 to my wife- inside a soccer ball ). To complete the model, you should imagine that the remaining volume inside the soccer ball ( the proton ) is filled up with a glue that, not surprising, is made by Bosons that are called “gluons”. By the way, the three tennis balls are not equal, two of them are called Up quarks and one Down quark, wherein the Up quarks have a positive charge of 2/3, while the Down quark has a negative charge of 1/3, so that summing up the charges you get 1, that is that charge of a proton.
Obviously this model is a cartoon, in reality they all are waves, but at this point the situation becomes a little bit mathematically complex.
About the electrons: yes, they are in perpetual motion, and they too are waves. They can be slowed, but to get stopped they’d have to be put at a temperature of 0 K, which is not just difficult, it is impossible, albeit to make Bose-Einstein condensates the electrons have been cooled down to decimal of K in a famous experiment made in the nineties at the MIT.
Warm Regards,
A.R.
I just read an article on the proton in which there is a diagram representing it by a circle (sphere) which contains three circles (spheres) smaller: the quarks. In three dimensions, either the quarks are not spherical, or the proton contains other elements in front and behind the diagram to be spherical, either there are unoccupied spaces or I did not understand anything.
Can you enlighten my lantern of non nuclear physicist on such a scheme?
My thanks and support for your work
Another question. Are not the electrons, by some mystery, in perpetual motion? if yes, this movement exists.
Best regards
Raffaele
If the eCat can output electricity directly, would not a battery and conversion circuit provide sufficient isolation for safety and certification concerns? If not, please clarify.
Boris:
As a matter of fact, I thought that my paper was going to be read by several hundreds of persons in one year at the most. What more surprises me is that it has been read by more than 15 thousand Physicists literally in all the world in just three months, most of them Prof and PhD. Obviously I think this means our work is beginning to be understood.
Warmest regards,
A.R.
Greg Daigle:
I agree.
Warm Regards,
A.R.
I am sure when a client of yous will manifest there will be a strong interest in all the world.
I think you should encourage them.
Cheers
Greg Daigle
Frank Acland:
1 MW.
We are serving only industries.
Warm Regards,
A.R.
Dear Andrea,
So far, what is the lowest kW order from a single customer?
Many thanks,
Frank Acland
Gerard McEk:
1- yes
2- no
3- yes
4- both
5- enough
Warm Regards,
A.R.
Sven B:
1- yes
2- yes
Warm Regards,
A.R.
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today in other posts of this blog.
Warm Regards,
A.R.
Domenico Canino:
I am not able to answer. So far we are not organized to work in Italy, but sooner or later we must serve in all the Countries, therefore also in Italy. I perfectly know I have many wonderful friends in your Country.
Warm Regards,
A.R.
dear Andrea, when will we see an ecat SK installed and operating in Italy? I know there has been great hostility towards you, but not all Italians are the same.
Dear Andrea Rossi,
You already confirmed orders from four countries.
1. Is Sweden one of them?
2. If Yes, more than one order from Sweden?
Sven B
Dear Andrea,
Hearing you have delivered plants to customers is reason for a great compliment. You are probably the first company actually employing LENR as a commercial product on a large scale, congratulations!
No doubt you are getting feedback of your plants. Some questions, if I may:
1. Is the COP as expected?
2. Can you give average operational figures of this COP?
3. Are you happy with the automatically produced E-Cats SK?
4. Are you still much involved in producing E-cats, or is your focus more on innovations like direct electricity production and E-Cat -jet/turbine combinations?
5. Now you are actually producing, the numbers of employers must have risen. How many employees are now working for the Leonardo company?
All the best!
Thanks and and kind regards, Gerard
Sam:
Yes, I am.
Warm Regards,
A.R.
Frank Acland:
c) yes
d)four
Warm Regards,
A.R.
Dear Andrea,
Just a follow-up on my previous question. For clarity, could you answer:
c) Are new E-Cats already operating with new customers (not including the first customer you have already mentioned?)
d) From how many countries have orders been received so far?
Many thanks,
Frank Aclnad
Hello DR Rossi
This is information about naming a product.
I do not know if you are aware of what it
says.
http://www.dmlp.org/legal-guide/florida-right-publicity-law
Regards
Sam
Dr. Rossi,
this is the correct link about sifferkoll written by “Prof”
http://www.sifferkoll.se/sifferkoll/meet-fred-zoepfl-the-secret-weapon-of-ihapco-or-a-physisist-malfunctioning/
Kind Regards,
Italo R.
Frank Acland:
a) yes
b) yes
c) four
Warm Regards,
A.R.
Dear Andrea,
Regarding the orders you are receiving:
a) Are you already building the E-Cats that have been ordered?
b) Are you already installing the E-Cats that have been ordered?
c) Are new E-Cats already operating with new customers (not including the first customer you have already mentioned?)
d) From how many countries have orders been received so far?
Many thanks,
Frank Acland
Jim Rosenburg:
1- yws
2- yes
3- no
Warm Regards,
A.R.
Congratulations for the work you are doing for the very important direct production of electricity.
Questions:
1- did you get orders also from other customers apart your partner?
2- are you still working to make 100 kW modules?
3- are you making preliminary studues for 1 MW modules?
Thank you and good luck,
Jimr
Dear Readers:
Please find on
http://www.rossilivecat.com
comments published today on other posts of this blog,
Warm Regards,
A.R.
Prof:
No comment.
Warm Regards,
A.R.
Rick57:
Thank you for the suggestion.
Hundreds. But the R&D is on course and I am not sure of the reliability of the results,
Warm Regards,
A.R.
Andrea, did you see this? The troll of IH and APCO is offering money to bloggists to disparage you:
http://www.sifferkoll.se/sifferkoll/meet-fred-zoepfl-the-secret-weapon-of-ihapco-or-a-physicist-malfunctioning/
Dear Andrea,
can you tell us the order of magnitude of the electrical power you are currently able to extract from the eCAT-SK: tens, hundreds or thousands of Watts ?
Thanks if you can respond.
My best wishes for the eCAT EH (Electricity & Heat) !
Riccardo
Steven N. Karels:
Thank you for the information,
Warm Regards,
A.R.
Dear Andrea Rossi,
If you are not already doing so, please consider quartz for the enclosure or window for the eCat-SD. It can have excellent transmission characteristics in the UV range, depending on the manufacturer.
Dear Readers,
Please go to
http://www.rossilivecat.com
To find comments published today on other posts of this blog,
Warm Regards
A.R.
Roberto:
Yes, but much work remains to be done.
Warm Regards,
A.R.
Did you already succeed to make electricity directly?
Steven N. Karels:
I see, anyway I didn’t notice this effect.
Warm Regards,
A.R.
Glass with magnesium will turn purple with exposure to UV.
Steven N. Karels:
No, but I never noticed the glasses of my windows to turn violet after years of exposition to direct sunlight: looking right now to the window in front of me, it is years old and it doesn’t show any violet spot, albeit it is exposed to direct sunlight many hours per day.
Warm Regards,
A.R.
Dear Andrea Rossi,
I recall that window glass turns violet after years of exposure to direct sunlight because of the UV content. Will you have a similar problem with the optical window on the eCat-SK?
Warren:
First and foremost, the most important peer reviewed publication of mine has been the US Patent 9,115,913 B1
USPTO publications of granted patents are the more difficult to obtain publications: they are peer reviewed by at least two specialists of the specific matter and the industrial implications of the US Patents are by orders of magnitude more important than any other peer reviewed publication.
To obtain an US Patent is very difficult, especially in our field. The peer reviewing of the USPTO is by far the most severe existing, for the obvious implications it has.
I made many failed attempts and many corrections before obtaining, after many years of errors and trials, my US Patent.
All the other publications of mine, also the ones with my co-authors, are listed shown on Researchgate. Just google “Researchgate Andrea Rossi”
Warm Regards,
A.R.
Jennifer Kent:
I do not know, I just answer to all the comments we receive.
Thank you for your kind attention to our work,
Warm Regards,
A.R.
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today on other posts of this blog,
Warm Regards,
A.R.
Dear Dr Rossi:
I noticed that in this blog sometimes there are many comments per day, sometimes much less: how do you explain?
Just a curiosity.
Congratulations for your important achievement with
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
It is the most read nuclear physics paper of these last months.
Regards,
Jennifer
Dr Rossi:
Did you ever made a peer reviewed publication?
Rudy Chiodega:
I suppose years.
Warm Regards,
A.R.
Chuck Davis:
Premature.
Warm Regards,
A.R.
Dr Rossi,
Do you have connections with domestic boilers manufacturers?
Warm Regards,
Chuck Davis
Dear Dr Andrea Rossi,
I am following your work since the year 2011 and I hope the Ecat will serve a better world to my two children.
I think the Ecat coupled with a Sterling engine could be useful in trasportation.
Question: how much time will be necessary before a global diffusion of the domestic Ecat? Months? Years? Decades?
Raffaele Bongo:
Obviously what you watched is a conventional representation of a proton like a sphere containing three smaller spheres ( like three tennis balls – today I lost again 6-0 to my wife- inside a soccer ball ). To complete the model, you should imagine that the remaining volume inside the soccer ball ( the proton ) is filled up with a glue that, not surprising, is made by Bosons that are called “gluons”. By the way, the three tennis balls are not equal, two of them are called Up quarks and one Down quark, wherein the Up quarks have a positive charge of 2/3, while the Down quark has a negative charge of 1/3, so that summing up the charges you get 1, that is that charge of a proton.
Obviously this model is a cartoon, in reality they all are waves, but at this point the situation becomes a little bit mathematically complex.
About the electrons: yes, they are in perpetual motion, and they too are waves. They can be slowed, but to get stopped they’d have to be put at a temperature of 0 K, which is not just difficult, it is impossible, albeit to make Bose-Einstein condensates the electrons have been cooled down to decimal of K in a famous experiment made in the nineties at the MIT.
Warm Regards,
A.R.
Hello A. Rossi
I just read an article on the proton in which there is a diagram representing it by a circle (sphere) which contains three circles (spheres) smaller: the quarks. In three dimensions, either the quarks are not spherical, or the proton contains other elements in front and behind the diagram to be spherical, either there are unoccupied spaces or I did not understand anything.
Can you enlighten my lantern of non nuclear physicist on such a scheme?
My thanks and support for your work
Another question. Are not the electrons, by some mystery, in perpetual motion? if yes, this movement exists.
Best regards
Raffaele
Stenen N. Karels:
Maybe.
Warm Regards,
A.R.
Dear Andrea Rossi,
If the eCat can output electricity directly, would not a battery and conversion circuit provide sufficient isolation for safety and certification concerns? If not, please clarify.
Mark Saker:
So far we prefer to supply the same blue module in multiple assemblies.
Warm Regards,
A.R.
Anonymous:
Look carefussy: there are two neutron bubble columns, one is open, one is a spare.
Warm regards,
A.R.
Boris:
As a matter of fact, I thought that my paper was going to be read by several hundreds of persons in one year at the most. What more surprises me is that it has been read by more than 15 thousand Physicists literally in all the world in just three months, most of them Prof and PhD. Obviously I think this means our work is beginning to be understood.
Warmest regards,
A.R.