Dear Dr Rossi,
Do you believe that the Direct Electricity effect you are observing:
1) results directly from LENR and will thus be explained by current and future LENR theories, or
2) results directly from the fact that there is a Plasma and can thus be explained by current Plasma physics theories, or
3) both (1) & (2).
Orso Pagani:
The years of cursus studiorum to become “Doctor” in Italy are the same to become “Dr” in the other Countries, or more. In Italy does not exist the “Ph.D.” definition. We become doctors after the publication of a thesis, that is a book, after all the examinations have been successfully made. We call it “Laurea” and it allows the student to become “Dr”, like, for example, me.
In Italy there is also the “Short Laurea”, that has less examinations, and corresponds to what in the USA is a “Master”.
Warm Regards,
A.R.
Darryl Montgomery:
We will take in considerations this possibility with our Partner after the plants we are installing will have been enough conslidated to anchor the real and fair value of our corporation on facts, nor words. beware of companied that sell shares based on dubious patent applications that have not generated real plants and production: in almost all the cases these kind of offers end up in the annihilation of the value of the shares or in bankrupcies. Always read carefully the disclaimers in the shares or funds buying contracts and when you read ” the investor is aware of the fact that this is an investment in a technology that could end up unsuccessfully so that the value of this investment could become zero”, or something like that, my suggestion is: STAY AWAY, THIS IS A POTENTIAL FRAUD.
Warm Regards,
A.R.
Italo R.:
Its operation is extremely useful and we learnt many, many things. Also related to the direct production of electricity.
Thank you for your continue attention to our work.
Warm Regards,
A.R.
About the new plants you are installing for your Customers.
For making the E-Cats:
1. You are making them entirely by hand, or
2. You are also using automated lines.
The aircraft is “dumping” 60kW of heat when the engine is operating at full power. Likewise, a jet engine produces thrust but must be cooled. This is not a major problem but it would need to be engineered.
Imagine a fleet of eCat powered prop aircraft driven by eCat technology. No carbon emissions. And if Andrea can make the jet version work and be also economical …
Dear Dr Rossi and readers of the JONP,
The trolls are making again very aggressive, after a period of intelligent pause, and are disseminating false information about you, mainly in their house-organ forum, but also around.
I know you do not bother the rock and troll, but I do, for the respect I have for the enormous work of your team, therefore I like to inform your readers about the guys the trolls are paid from.
I am an italian professional financial investigator and for me it has been a piece of cake to find a thread of interesting things. I discovered that when they disparage you with false information and misrepresentations they are guys soaked with gasoline approaching a bonfire.
Here is the first piece, just an appetizer: http://www.sifferkoll.se/sifferkoll/is-the-focus-on-industrial-heat-valuation-and-woodford-cherokee-connections-making-dewey-weaver-go-ballistic/
Dear Steven Karels,
‘ Additionally, some heat control might be needed to exhaust excess heat.’
6*22kW units at 50% efficiency, implies dumping 66kW of heat.
That will need quite a lot of extra hardware (and weight)
This might be a “fast track” to demonstrate the eCat-SK in airborne propulsion.
The Pipistrel Alpha Electra is a certified, all electric airplane (based out of Australia). It has a 20kWhr battery and has a nominal flight time of 50 minutes with a 30 minute reserve. The engine is a 60kW motor.
Assuming your direct electricity production eCat-SK works at 50% conversion efficiency, you could use 5 or 6 of the 22kW thermal output eCat-SK units to power the motor and aircraft electrical systems. Also assuming the eCat-SK control system will require 5kW of electric power to control the eCat-SK units, use the 20 kWhr onboard battery to power the controller. In this manner, the control of the eCat-SK is totally independent of the eCat-SK energy production. With a 5kW draw, the 20kW battery should increase their flight time from 50 min with 30 min reserve to over 3 hours plus 30 min reserve. Since this is a certified aircraft, only the electrical power change would need a local modification by the approving agency. Additionally, some heat control might be needed to exhaust excess heat.
Dr Andrea Rossi,
In the video http://www.ecatskdemo.com you introduced the Ecat SK: can we say that the technology is substantially the same shown with the Ecat QX on November 24 in Stockholm ?
Cheers
Bob
Raffaele Bongo:
They are moving like hell. Gluons just avoid them to escape from the proton ( and the neutron ) in which they are confined. No gluons, no life, believe me. Light up a candle to Saint Gluon, protector of everything.
As for the tennis: thank you for your suggestion!
Warm Regards,
A.R.
Hello A. Rossi
My reading on the proton inspires me with a new question.
Are the quarks frozen by the glue called gluons or are they also moving inside the proton?
I am really sorry to hear that your wife inflicts a (6-0) every Sunday. I took out my crystal ball and I saw that your tennis is good but your wife is very talented and reached the 5 sigma both service and recovery. The only way to hope for your service would be ……. Change woman … .. (Confidential information)
All my support in your suffering in tennis
With kind regards and forgiveness for my words a little moved
Raffaele
Giovanni Galimberti:
“renormalisation” means that when one does not obtain the results he wants, he cooks the math to get what he wants.
Warm Regards,
A.R.
Dear Andrea Rossi,
I have some questions about the production of E-CAT SK.
1. Are ABB robots used in the manufacture of the new E-CAT SK for your four new customers?
2. If yes to question 1: Which parts inside the blue cabinet are manufactured with ABB robots? Only the reactor itself?
3. If yes to question 1: Is the manufacturing outsourced to a partner who already has ABB robots or have you and your team bought or rented robots that you are responsible for?
4. You have previously confirmed in this forum that there have been orders from four different countries but at the E-CAT SK-demo you mentioned that you were ready to deliver to three countries, the US, Sweden and Japan. Which is the fourth country?
Hope for a great impact this year!
Greetings
P
Dear Andrea,
Analyzing carefully the video http://www.ecatskdemo.com I got the convinction that you are producing inside low energy X-Rays.
By the way, this hypothesis id not inconciliable with your paper www,researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Cheers
Prof
I just read this interesting article on Lithium ion conductors I’m not sure if it’s applicable or not to your ecats but I thought it might be interesting to you or your team for future technology developments
It would be fascinating to see a video of the ABB robots doing E-Cat SK module assembly.
Would you consider publishing an advertising video if it does not show confidential information?
Wishing you continued good luck with your business venture.
Dr Rossi,
Questions from another follower:
1- is your business partner handling engineering, fabrication, installation?
2- are you using shipping containers for the installations?
Jim Rosenburg
See on Power Engineering March 26 2019
Important start: Southern Co. Utility, Georgia Power and georgia Tech will build a 1.4 MW microgrid in midtown Atlanta.
Rod Walton
WaltC:
3)
Warm Regards,
A.R.
Dear Dr Rossi,
Do you believe that the Direct Electricity effect you are observing:
1) results directly from LENR and will thus be explained by current and future LENR theories, or
2) results directly from the fact that there is a Plasma and can thus be explained by current Plasma physics theories, or
3) both (1) & (2).
Thanks, WaltC
Frank Acland:
a)
Warm Regards,
A.R.
Dear Andrea,
Can you provide an indication of how many E-Cat SKs you have manufactured for customers so far?
a) 1-10 MW
b) 10-20 MW
c) More than 20 MW
Thank you very much,
Frank Acland
Orso Pagani:
The years of cursus studiorum to become “Doctor” in Italy are the same to become “Dr” in the other Countries, or more. In Italy does not exist the “Ph.D.” definition. We become doctors after the publication of a thesis, that is a book, after all the examinations have been successfully made. We call it “Laurea” and it allows the student to become “Dr”, like, for example, me.
In Italy there is also the “Short Laurea”, that has less examinations, and corresponds to what in the USA is a “Master”.
Warm Regards,
A.R.
Darryl Montgomery:
We will take in considerations this possibility with our Partner after the plants we are installing will have been enough conslidated to anchor the real and fair value of our corporation on facts, nor words. beware of companied that sell shares based on dubious patent applications that have not generated real plants and production: in almost all the cases these kind of offers end up in the annihilation of the value of the shares or in bankrupcies. Always read carefully the disclaimers in the shares or funds buying contracts and when you read ” the investor is aware of the fact that this is an investment in a technology that could end up unsuccessfully so that the value of this investment could become zero”, or something like that, my suggestion is: STAY AWAY, THIS IS A POTENTIAL FRAUD.
Warm Regards,
A.R.
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today on other posts of this blog,
Warm Regards,
A.R.
Dear Dr Rossi,
Are you planning to be a public traded company?
If yes, do you have a timeline in mind?
Dear Dr Rossi,
I read your scholastic career, it looks very good.
Is the Italian doctorate equivalent to a PhD ?
O.P.
@Investigator:
When the follow up?
Italo R.:
Its operation is extremely useful and we learnt many, many things. Also related to the direct production of electricity.
Thank you for your continue attention to our work.
Warm Regards,
A.R.
Italo R.:
Parts are made in automated lines, parts no.
Warm Regards,
A.R.
Dear Dr. Rossi,
About the new plants you are installing for your Customers.
For making the E-Cats:
1. You are making them entirely by hand, or
2. You are also using automated lines.
Kind Regards,
Italo R.
Dear Dr. Rossi,
About the first E-Cat you installed on november 19, I suppose it is still working well. Am I right?
Have you learned or discovered something new analyzing the experience of these four months, useful for the following installations?
Kind Regards,
Italo R.
Hello DR Rossi
This is a link to events to honour the 500
year anniversary of Leonardo da Vinci.
https://www.nytimes.com/2019/02/12/travel/leonardo-da-vinci-travel-tours-museums.html
Regards
Sam
Greg Leonard,
The aircraft is “dumping” 60kW of heat when the engine is operating at full power. Likewise, a jet engine produces thrust but must be cooled. This is not a major problem but it would need to be engineered.
Imagine a fleet of eCat powered prop aircraft driven by eCat technology. No carbon emissions. And if Andrea can make the jet version work and be also economical …
Michal Liebler:
Thank you for your attention to the work of our Team,
Warm Regards,
A.R.
Dear Dr Rossi and readers of the JONP,
The trolls are making again very aggressive, after a period of intelligent pause, and are disseminating false information about you, mainly in their house-organ forum, but also around.
I know you do not bother the rock and troll, but I do, for the respect I have for the enormous work of your team, therefore I like to inform your readers about the guys the trolls are paid from.
I am an italian professional financial investigator and for me it has been a piece of cake to find a thread of interesting things. I discovered that when they disparage you with false information and misrepresentations they are guys soaked with gasoline approaching a bonfire.
Here is the first piece, just an appetizer:
http://www.sifferkoll.se/sifferkoll/is-the-focus-on-industrial-heat-valuation-and-woodford-cherokee-connections-making-dewey-weaver-go-ballistic/
I am impressed with this blog, really I am a fan.
Congratulations for http://www.ecatskdemo.com
It is becoming viral
Dear Steven Karels,
‘ Additionally, some heat control might be needed to exhaust excess heat.’
6*22kW units at 50% efficiency, implies dumping 66kW of heat.
That will need quite a lot of extra hardware (and weight)
Steven N. Karels:
Thank you for the insight, but, as you know, we have other priorities now.
Warm Regards,
A.R.
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today in other posts of this blog,
Warm Regards,
A.R.
C.H.:
We are very optimistic about the results.
Warm Regards,
A.R.
Dear Andrea Rossi,
This might be a “fast track” to demonstrate the eCat-SK in airborne propulsion.
The Pipistrel Alpha Electra is a certified, all electric airplane (based out of Australia). It has a 20kWhr battery and has a nominal flight time of 50 minutes with a 30 minute reserve. The engine is a 60kW motor.
Assuming your direct electricity production eCat-SK works at 50% conversion efficiency, you could use 5 or 6 of the 22kW thermal output eCat-SK units to power the motor and aircraft electrical systems. Also assuming the eCat-SK control system will require 5kW of electric power to control the eCat-SK units, use the 20 kWhr onboard battery to power the controller. In this manner, the control of the eCat-SK is totally independent of the eCat-SK energy production. With a 5kW draw, the 20kW battery should increase their flight time from 50 min with 30 min reserve to over 3 hours plus 30 min reserve. Since this is a certified aircraft, only the electrical power change would need a local modification by the approving agency. Additionally, some heat control might be needed to exhaust excess heat.
Dr Rossi,
How are going your experiments to make electric power directly with the Ecat, without converting devices?
Bob:
Yes, what is different is the control system.
Warm Regards,
A.R.
Dr Andrea Rossi,
In the video http://www.ecatskdemo.com you introduced the Ecat SK: can we say that the technology is substantially the same shown with the Ecat QX on November 24 in Stockholm ?
Cheers
Bob
Raffaele Bongo:
They are moving like hell. Gluons just avoid them to escape from the proton ( and the neutron ) in which they are confined. No gluons, no life, believe me. Light up a candle to Saint Gluon, protector of everything.
As for the tennis: thank you for your suggestion!
Warm Regards,
A.R.
Hello A. Rossi
My reading on the proton inspires me with a new question.
Are the quarks frozen by the glue called gluons or are they also moving inside the proton?
I am really sorry to hear that your wife inflicts a (6-0) every Sunday. I took out my crystal ball and I saw that your tennis is good but your wife is very talented and reached the 5 sigma both service and recovery. The only way to hope for your service would be ……. Change woman … .. (Confidential information)
All my support in your suffering in tennis
With kind regards and forgiveness for my words a little moved
Raffaele
Giovanni Galimberti:
“renormalisation” means that when one does not obtain the results he wants, he cooks the math to get what he wants.
Warm Regards,
A.R.
Dear Andrea:
Studying quantum mechanics, I find many times the definition “renormalisation”: what does it mean exactly?
Thanks,
Giovanni
P:
1-confidential
2- n.a.
3- n.a.
4- too easy to understand who is the Client if I answer
Warm Regards,
A.R.
Prof:
Thank you for your insight,
Warm Regards,
A.R.
Dear Readers:
Please go to
http://www.rossilivecat.com
to read comments published today in other posts of this blog,
Warm Regards,
A.R.
Stephen:
Thank you for this interesting information.
Warm Regards,
A.R.
Dear Andrea Rossi,
I have some questions about the production of E-CAT SK.
1. Are ABB robots used in the manufacture of the new E-CAT SK for your four new customers?
2. If yes to question 1: Which parts inside the blue cabinet are manufactured with ABB robots? Only the reactor itself?
3. If yes to question 1: Is the manufacturing outsourced to a partner who already has ABB robots or have you and your team bought or rented robots that you are responsible for?
4. You have previously confirmed in this forum that there have been orders from four different countries but at the E-CAT SK-demo you mentioned that you were ready to deliver to three countries, the US, Sweden and Japan. Which is the fourth country?
Hope for a great impact this year!
Greetings
P
Dear Andrea,
Analyzing carefully the video http://www.ecatskdemo.com I got the convinction that you are producing inside low energy X-Rays.
By the way, this hypothesis id not inconciliable with your paper www,researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Cheers
Prof
Dear Andre Rossi
I just read this interesting article on Lithium ion conductors I’m not sure if it’s applicable or not to your ecats but I thought it might be interesting to you or your team for future technology developments
https://m.phys.org/news/2019-03-lithium-ions-solid-material.html
Best Regards
Stephen
Frank Acland:
Centralized heating and manufacturing of machinery.
Warm Regards,
A.R.
Daniel G. Zavela:
Thank you for the suggestion,
Warm Regards,
A.R.
Dear Dr. Rossi,
It would be fascinating to see a video of the ABB robots doing E-Cat SK module assembly.
Would you consider publishing an advertising video if it does not show confidential information?
Wishing you continued good luck with your business venture.
Best Regards,
Daniel G. Zavela
Dear Andrea,
In which industrial sectors have your E-Cat orders come from so far?
Many thanks,
Frank Acland
Jim Rosenburg:
1- partly
2- no
Warm Regards,
A.R.
Dr Rossi,
Questions from another follower:
1- is your business partner handling engineering, fabrication, installation?
2- are you using shipping containers for the installations?
Jim Rosenburg
Toussaint Francois:
Not yet,
Warm Regards,
A.R.
Sam:
Not yet.
Warm Regards,
A.R.
Rod Walton:
Thank you for the information,
Warm Regards,
A.R.
See on Power Engineering March 26 2019
Important start: Southern Co. Utility, Georgia Power and georgia Tech will build a 1.4 MW microgrid in midtown Atlanta.
Rod Walton
Hello Dr Rossi
I am wondering if my country Canada
is one of the four with confirmed
E-Cat-SK orders.
Regards
Sam
Dear Andra Rossi
One question please, this year will you deliver your products to France ?
Warm Regards,
Toussaint François