Congratulations on your monumental discovery and entire body of work. Not taking sides on the comment from Karl Weislander, but the last name is probably derived from a combination of “weis” (white) and “lander” (land) i.e. someone whose ancestors originated from the far north.
Agreed, a formal test and certification is better left to a specialized external party and it should be sufficient.
However, I think that an unortodox demonstration like the one I am suggesting would help convincing a broad and “ignorant” audience (me included), and speed up the diffusion of the message.
Thanks.
Dr Rossi,
1- how long the charge of the Ecat SK Leonardo will last in full power?
2- will the charge last longer reducing the power?
3- can the charge be changed by the customer?
Bets Regards,
Martin Himpe
Dear Andrea
Congratulations again, now your invention can really change the course of history. The sudden availability of electrical and thermal energy at almost zero costs will have to be managed wisely in order not to cause economic catastrophes but once the storm has passed the advantages will be enormous. Perhaps among the most important could be to end the current international conflicts for fossil and nuclear fuels and prevention of future international water conflicts supposed for the middle of the century. Oil, methane and uranium will lose their value and the desalination of the oceans and the purification of dirty fresh water will no longer be impossibly expensive. Thanks!
Dear Andrea,
Speaking asymptotically, 1) how many tiny ants will it take to lift the smallest functional E-Cat SK Leonardo? Or 2) will grasshoppers be needed? And 3) can an elephant topple the largest possible, stable E-Cat SK Leonardo?
Thank you.
Sincerely,
LilyLover
Congratulations on achieving continuous SSM. How much work is left to make this into a product on the market, if you consider legal hurdles as well as technical hurdles? I know this can be very hard to estimate.
You said it is easy to modulate the output power. By this do you mean
1. a slow variation, as in seconds, OR
2. a Fast variation, as in a 60 Hz modulation of a DC source?
Of course a chemical or equivalent source could be used in the short term. But if you look at the energy density and the power density of the object over a long period of time, then the effect can be separated between chemical or nuclear effects. Take a look at the Lugano report for a clear explanation. Or use Wikipedia and search Ragone plots. When the independent testing is done, it is probable that such measurements will be performed.
Colin Watters:
Independent test means a test made by specialists that do not depend from us, Certification in this case means to certify the data related to the efficiency. In other words: means certify that there are not other energy sources and that the energy necessary to make the Ecat operation is generated by the same Ecat.
Warm Regards,
A.R.
Jari L:
The Team restricted to the persons that have performed with me the SK Leonardo experiments is composed by 6 persons. The Team is 21 persons if we consider all the persons that work with me in all the aspects of our activity. The official confirmation of the results will be given by a third party.
Warm Regards
Italo R.:
It is not necessary, but we want that the presentation is corroborated by a performance certification made by independent experts. This presentation will be strong and global and I want not to base it on my declaration, due to the importance of the issue. It is not necessary, but I want it.
Warm regards,
A.R.
Plasma Fan:
Thank you!
Answers:
1- no
2- the Ecat has not input energy, it generates the energy it needs
3- confidential
4- yes
5- no
6- a potential cannot be an abstraction
7- my effect is not cold fusion and is not LENR as this term is commonly defined. The definition “Energy from the fabric of the space” in itself is privy of meaning unless you define the meaning of every term of it
Warm Regards,
A.R.
Karl Wieslander:
A so stupid and insulting comment comes obviously from a troll.
Usually I spam the rock and troll music, but this I wanted to publish for a more general issue: the Entity that will make the performance certification will have access to the black box, to verify what it contains for safety reasons. They will not have know how information about the connections and the logic of the control system.
So, in this case from a troll’s comment has been born a useful information, therefore I am publishing it.
Regards
A.R.
Dear dr Rossi:
I have a proposal for the name to give to the charge module of the Ecat SK leonardo, stick or whatener it might be:
Gasoline is the fuel for gas engines
Diesel for Diesel engines
I propose Rossium for the Ecat
Yours Kenko
Congratulations on your achievement! It’s extremely exciting to hear that you have been able to close the loop.
1) Does the closed looped E-Cat SKL produce the same total output (thermal and electrical) per unit of internal reactor volume as the E-Cat SK (which primarily produced only heat)?
2) Did the required input power for the E-Cat SKL go up or down compared to the E-Cat SK which consumed only a minuscule quantity of input?
3) Is the plasma ball in the E-Cat SKL free floating (not touching the electrodes)?
4) Is the E-Cat SKL like the E-Cat QX in that it has one cathode and one anode?
5) Once you stated that one of your systems could produce thrust for propulsion. Have you performed any tests to determine if the E-Cat SKL is producing thrust or any sort of field configuration that could manipulate apparent mass, inertia, or gravity?
6) Do you believe the scalar and vector potentials are indeed physical realities and not mathematical abstractions?
7) Do you believe that you have minimized any type(s) of nuclear reactions (LENR, cold fusion, etc) and are now mainly tapping energy from the fabric of space?
Thank you very much for any answers you can provide.
Dear dr Rossi.Congratulation to your success.
How many people do you have in your team, and would/can they confirm your results officially?
Im happy for you and your team❤️
Frank Acland:
The certifications of the efficiency made by the entity that will make the test on the Ecat SK Leonardo.
Should be completed within January.
Warm Regards,
A.R.
Dear Dr Rossi,
It’s a bad joke. Caterpillar Tractor Company makes huge tractors, the D-8 being one of the most powerful. The caterpillar bug has many powerful legs pulling together. A series of 8 of your E-Cats = D-8 E-Caterpillar. 🙂
You just wrote that the timing of the presentation “depends also from the time of the certifications”. Could you explain which certifications you are referring to?
Dear Readers:
I wrote in a comment yesterday that the demo of the Ecat SK Leonardo will be made in January:
this is a thought, not a guarantee, it depends also from the time of the certifications, so it could be delayed to February.
Warm Regards,
A.R.
Sven B:
a- any you want: voltage at the output is adjustable with off the shelf devices
b- I do not think this will happen: I owe to the USA everything I had here to realize what I did and nobody has ever tried to stop the development of this technology. On the contrary, my work here has always been sustained and protected. This is the fact and I think on the bases of facts, not of processes to intentions.
Warm Regards,
A.R.
Stefano G.:
For many reasond the certification of efficiency has been decided by an entity that is specialized to test the efficiency of this kind of things. They are specialists and as far as I am concerned they can do what they want.To measure the Ecat SK Leonardo is very simple: no energy enters, electricity and heat exit. To measure the Wh through a load is simple, to measure the Joules at the input and the output of a heat exchanger is well known.
Warm Regards,
A.R.
Willgh:
The presentation will be made in due time in due place between January and February 2020.
Warm Regards,
A.R.
LilyLover:
Answering asymptotically: what did you drink ?
Warm Regards,
A.R.
Dr. Rossi,
Congratulations on your monumental discovery and entire body of work. Not taking sides on the comment from Karl Weislander, but the last name is probably derived from a combination of “weis” (white) and “lander” (land) i.e. someone whose ancestors originated from the far north.
Sincerely,
Robert Dorr
Neri Accornero:
Thank you for your continue attention to the work of our Team,
Warm Regards,
A.R.
Martin Himpe:
1- 4000-5000 hours
2- yes
3- yes
Warm Regards,
A.R.
Agreed, a formal test and certification is better left to a specialized external party and it should be sufficient.
However, I think that an unortodox demonstration like the one I am suggesting would help convincing a broad and “ignorant” audience (me included), and speed up the diffusion of the message.
Thanks.
Dr Rossi,
1- how long the charge of the Ecat SK Leonardo will last in full power?
2- will the charge last longer reducing the power?
3- can the charge be changed by the customer?
Bets Regards,
Martin Himpe
Dear Andrea
Congratulations again, now your invention can really change the course of history. The sudden availability of electrical and thermal energy at almost zero costs will have to be managed wisely in order not to cause economic catastrophes but once the storm has passed the advantages will be enormous. Perhaps among the most important could be to end the current international conflicts for fossil and nuclear fuels and prevention of future international water conflicts supposed for the middle of the century. Oil, methane and uranium will lose their value and the desalination of the oceans and the purification of dirty fresh water will no longer be impossibly expensive. Thanks!
Dear Andrea,
Speaking asymptotically, 1) how many tiny ants will it take to lift the smallest functional E-Cat SK Leonardo? Or 2) will grasshoppers be needed? And 3) can an elephant topple the largest possible, stable E-Cat SK Leonardo?
Thank you.
Sincerely,
LilyLover
A Question comes to mind:
Is anybody here within the expert audience, who has the ability or knows a way to place a paper on the e-cat into the Madrid COP25 agenda?
UN Climate Change Conference – December 2019 (02 Dec, 2019-13 Dec, 2019)
The Rossi Effect seems to be completely unknow to the public, inspite of it’s big potential to reduce CO2 in the atmosphere.
Dear Andrea Rossi,
Congratulations on achieving continuous SSM. How much work is left to make this into a product on the market, if you consider legal hurdles as well as technical hurdles? I know this can be very hard to estimate.
Godspeed
Peter Forsberg
Dear Mr Rossi
Is any new physics needed to explain the success of your experiment or is it just a trick with known physics ?
I am vey curious about your theoritical pointof view !
Best regards !
Remi
Steven N. Karels:
Note the nickname of this clown: Wie ( =we) slander …
Every comment is useless.
Warm Regards,
A.R.
Steven N. Karels:
1
Warm regards,
A.R.
Dear Andrea Rossi,
You said it is easy to modulate the output power. By this do you mean
1. a slow variation, as in seconds, OR
2. a Fast variation, as in a 60 Hz modulation of a DC source?
Karl Wieslander.
Of course a chemical or equivalent source could be used in the short term. But if you look at the energy density and the power density of the object over a long period of time, then the effect can be separated between chemical or nuclear effects. Take a look at the Lugano report for a clear explanation. Or use Wikipedia and search Ragone plots. When the independent testing is done, it is probable that such measurements will be performed.
Toussaint Francois:
1- several seconds
2- yes
Warm Regards,
A.R.
Dear Andrea Rossi,
May I ask 2 questions please.
1- How long does it take to start up the SKL.
2- Is it easy to modulate the power?
Warm Regards
Toussaint François
Colin Watters:
Independent test means a test made by specialists that do not depend from us, Certification in this case means to certify the data related to the efficiency. In other words: means certify that there are not other energy sources and that the energy necessary to make the Ecat operation is generated by the same Ecat.
Warm Regards,
A.R.
Jari L:
The Team restricted to the persons that have performed with me the SK Leonardo experiments is composed by 6 persons. The Team is 21 persons if we consider all the persons that work with me in all the aspects of our activity. The official confirmation of the results will be given by a third party.
Warm Regards
Italo R.:
It is not necessary, but we want that the presentation is corroborated by a performance certification made by independent experts. This presentation will be strong and global and I want not to base it on my declaration, due to the importance of the issue. It is not necessary, but I want it.
Warm regards,
A.R.
Plasma Fan:
Thank you!
Answers:
1- no
2- the Ecat has not input energy, it generates the energy it needs
3- confidential
4- yes
5- no
6- a potential cannot be an abstraction
7- my effect is not cold fusion and is not LENR as this term is commonly defined. The definition “Energy from the fabric of the space” in itself is privy of meaning unless you define the meaning of every term of it
Warm Regards,
A.R.
Karl Wieslander:
A so stupid and insulting comment comes obviously from a troll.
Usually I spam the rock and troll music, but this I wanted to publish for a more general issue: the Entity that will make the performance certification will have access to the black box, to verify what it contains for safety reasons. They will not have know how information about the connections and the logic of the control system.
So, in this case from a troll’s comment has been born a useful information, therefore I am publishing it.
Regards
A.R.
Kenko:
Thank you for the suggestion,
Warm Regards,
A.R.
Dear dr Rossi:
I have a proposal for the name to give to the charge module of the Ecat SK leonardo, stick or whatener it might be:
Gasoline is the fuel for gas engines
Diesel for Diesel engines
I propose Rossium for the Ecat
Yours Kenko
Dear dr Rossi,
How can we know you’re not simply using an ordinary battery inside your ecat? Energy exit without any input.
Dear Andrea,
Congratulations on your achievement! It’s extremely exciting to hear that you have been able to close the loop.
1) Does the closed looped E-Cat SKL produce the same total output (thermal and electrical) per unit of internal reactor volume as the E-Cat SK (which primarily produced only heat)?
2) Did the required input power for the E-Cat SKL go up or down compared to the E-Cat SK which consumed only a minuscule quantity of input?
3) Is the plasma ball in the E-Cat SKL free floating (not touching the electrodes)?
4) Is the E-Cat SKL like the E-Cat QX in that it has one cathode and one anode?
5) Once you stated that one of your systems could produce thrust for propulsion. Have you performed any tests to determine if the E-Cat SKL is producing thrust or any sort of field configuration that could manipulate apparent mass, inertia, or gravity?
6) Do you believe the scalar and vector potentials are indeed physical realities and not mathematical abstractions?
7) Do you believe that you have minimized any type(s) of nuclear reactions (LENR, cold fusion, etc) and are now mainly tapping energy from the fabric of space?
Thank you very much for any answers you can provide.
Sincerely,
Plasma Fan
Dear Dr. Rossi,
What kind of certification is necessary before the demostration of the new Ecat SKL?
Kind regards,
Italo R.
Dear dr Rossi.Congratulation to your success.
How many people do you have in your team, and would/can they confirm your results officially?
Im happy for you and your team❤️
Best regards Jari L
Dear Mr Rossi, Please can you clarify what you mean by an “independent test” and “certification”? Thanks.
Frank Acland:
The certifications of the efficiency made by the entity that will make the test on the Ecat SK Leonardo.
Should be completed within January.
Warm Regards,
A.R.
Jim:
Thank you,
Warm Regards,
A.R.
Iggy Dalrymple:
Ohhh
he,he,he
Warm Regards,
A.R.
Dear Dr Rossi,
It’s a bad joke. Caterpillar Tractor Company makes huge tractors, the D-8 being one of the most powerful. The caterpillar bug has many powerful legs pulling together. A series of 8 of your E-Cats = D-8 E-Caterpillar. 🙂
Dear Dr Rossi:
No problem if the presentation will be January or February: it will remain a miracle.
All the best,
Jim
Dear Andrea,
You just wrote that the timing of the presentation “depends also from the time of the certifications”. Could you explain which certifications you are referring to?
Many thanks,
Frank Acland
Charlie Sutherland:
Thank you!
Warm Regards,
A.R.
Iggy Dalrymple:
What do you mean?
Warm Regards,
A.R.
Dear Dr Rossi,
Series of 8 E-Cat SK = D8 E-Caterpillar
Regards,
Iggy
Congratulations: I am happy for you and your crew,
Charlie Sutherland
Dear Readers:
I wrote in a comment yesterday that the demo of the Ecat SK Leonardo will be made in January:
this is a thought, not a guarantee, it depends also from the time of the certifications, so it could be delayed to February.
Warm Regards,
A.R.
Jeff Smathers:
…Wow !
Warm Regards,
A.R.
John B:
yes
Warm Regards,
A.R.
Sven B:
a- any you want: voltage at the output is adjustable with off the shelf devices
b- I do not think this will happen: I owe to the USA everything I had here to realize what I did and nobody has ever tried to stop the development of this technology. On the contrary, my work here has always been sustained and protected. This is the fact and I think on the bases of facts, not of processes to intentions.
Warm Regards,
A.R.
Gerard McEk:
1- yes
2- indefinitely
3- by a load
4- by calorimetry
5- I hope too
Warm Regards,
A.R.
Rick 57:
As you correctly write, to use the same module to assemble any power is the most efficient way to industrialize the item.
Warm Regards,
A.R.
Stephen:
Thank you for your kind sustain,
Warm Regards,
A.R.
Arjen:
Thank you for the suggestion, but to change the charge takes minutes and the charge is cheap.
Warm Regards,
A.R.
Stefano G.:
For many reasond the certification of efficiency has been decided by an entity that is specialized to test the efficiency of this kind of things. They are specialists and as far as I am concerned they can do what they want.To measure the Ecat SK Leonardo is very simple: no energy enters, electricity and heat exit. To measure the Wh through a load is simple, to measure the Joules at the input and the output of a heat exchanger is well known.
Warm Regards,
A.R.
Martin Himpe:
1- yes
2- few dollars
Warm Regards,
A.R.