United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

30,515 comments to United States Patent US 9,115,913 B1

  • James Rice

    Dear Dr. Rossi:

    The new navy patent is of itself not a third party replication, although one might have taken place. It IS a competing patent. Hopefully you have applied for patents for all your inventions, and are not trying to keep your I.P. as a trade secret, i.e., concealed. As you know, the U.S. gives priority to the inventor who is first to file, not first to invent, so you may want to file applications for any non-filed inventions soon!

  • Andrea Rossi

    Frank Acland:
    Yes, I saw it: well, this is an Independent Third Party Replication.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stephen:
    Thank you for your suggestion,
    Warm Regards,
    A.R.

  • Stephen

    Dear Andrea

    I just had a crazy thought about using TEG’s. Probably too crazy

    I suspect there is an error in my thinking but who knows maybe there is something useful in it:

    I wonder if a TEG attached to the lamp could provide enough power to supply the e-cat SKL.

    https://tecteg.com/wp-content/uploads/2015/11/TEG2-126LDT-Spec.-sheet.1.-REV..pdf

    Maybe 1 V x 0.4 A = 0.4 W for a 4 x 4 cm TEG with a 40 Deg C hot side and 20 Deg C cold side.

    I suppose it depends on lamp power and SKLed input power. And the thermal management

    But assuming the LED aspect produces close to 10 W heat that is a pure guess

    The Assuming a BB radiator 10.5 W waste heat is radiated at 40 Deg C by 192 cm^2 according Stefan Boltzmann Law.

    For example use 6 x 16 cm2 fins each at 40 deg C they would be 40 degC each with a with a 4 cm square TEG attached to each side. Then larger fins at 20 deg C (twelve 25 cm^2 fins should be more than enough I think) attached to the other side of each TEG With a 20 deg C airflow.

    Then we could potentially have 12 TEGs

    And if I’m not mistaken 12 x 1 A x 0.4 V. Potentially 4.8 W!

    Could this be sufficient to sustain the SKLed?

    It’s quite temperature sensitive so if the temperature difference is less it could make big difference to the Watts generated.

    On the other hand since it’s based on heat it should be lean smooth and avoid power spikes which might be what the SKLed needs.

    Would be cool though if you could hold it in your hand for 20 seconds and that small energy difference charges a capacitor sufficient to start it. Once started the heat from the light sustains it.

    Just some crazy thermal ideas.

    Thanks and Best Regards

    Stephen

  • Frank Acland

    Dear Andrea,

    Hi Andrea, did you see this patent application from the US Navy:

    http://appft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&u=%2Fnetahtml%2FPTO%2Fsearch-adv.html&r=1&p=1&f=G&l=50&d=PG01&S1=20210090752.PGNR.&OS=dn/20210090752&RS=DN/20210090752

    Part of it is identical to your Fluid Heater patent.

    Kind regards,

    Frank Acland

  • Prof

    Dear Dr Andrea Rossi:
    The US Navy has made en Independent Third Party replication of your effect, that you patented in 2015, and they made a patent whose core id a copycat of your patent ( specially the claim 3 ) of your patent!
    The US Navy patent application that replicates your effect is here:
    US PATENT APPLICATION PUBLICATION US 2021/0090752 A1
    This is a great achievement of yours !!!
    Ad majora,
    Prof

  • Andrea Rossi

    Wilfried Babelotzky:
    Maybe,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Calle H:
    The Customer wherein we will make the presentation will be disclosed at the presentation.
    We do have Customers that have also our license to manufacture and sell.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Calle H:
    The Customer is just a Customer.
    Warm Regards,
    A.R.

  • Calle H

    Dear Dr. Rossi,
    There are so many possible applications of the SKLed light, e.g. vertical farming has been mentioned. May I ask if the customer at the November 30 presentation will only do sales of the SKLed product? or is the customer also providing assistance in application engineering?
    Thank you if you can answer.
    Calle H

  • Calle H

    Dear Dr. Rossi,
    May I ask questions related to the November 30 presentation:
    – are there other customers that will have the rights to the SKLed product?
    – have you decided when to disclose who the customer is?
    Thank you if you can answer.
    Calle H

  • Wilfried Babelotzky

    Dear Andra,

    Do I interpret correctly that there will be no presentation of the ECat SKL, but various presentations of products that have the ECat SKL installed?

    Best regards
    Wilfried

  • Andrea Rossi

    eernie1:
    Thank you for your insight,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Chuck Davis:
    It will be only for the Ecat SKLed,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gerard McEk:
    Maybe,
    Warm Regards,
    A.R.

  • Andrea Rossi

    eernie1:
    Thank you for your speculation,
    Warm Regards,
    A.R.

  • Dear Andrea,
    I am still bored so I would like to expand on my model at the unintended possibility of boring your readers.
    In the subquantum region, the particles are connected to all the particles in the universe. Therefor any information bits received by these particles are instantaneously entangled with all particles no matter how far apart. This means an observer who can receive this information and has the means to retrieve it can see for instance a video that has been injected into space many light years away. Also if an object can be superimposed atom by atom into the particles in the subquantum space, it may be possible to retrieve it light years away. Maybe this is where flying saucers are seen when physical conditions such as lightning strokes allow the objects to be transferred. Science fiction? Maybe!!
    Speculative regards.

  • Gerard McEk

    Dear Andrea,
    It is known that the Standard Model cannot explain everything that is being observed and therefore physicists all over the world try to find signals that could indicate where the SM goes wrong.
    Scientists of Cern have now found indications (3 sigma) that decay of the Beauty Quark is not conform the predictions of the SM.
    If this is being confirmed by others and reaches 5 sigma level of confidence, new physics will be required and may help to accept the Rossi effect.
    https://arxiv.org/pdf/2103.11769.pdf

  • Chuck Davis

    Dear Andrea, Is your intention for the Nov 30 presentation to be for only the SKLED or will it include the SKL also?

    Warm regards,
    Chuck Davis

  • I am a little bored waiting for further information about your device so I wish to present the outline of a model for our physical existence.
    We are at present stymied in our quest for more information about the physical nature of the universe because of our inability to perceive qualities below the quantum level. So we must work with what we can deduce and assume(guess) what the nature of subquantum region resembles The present quantum level at the present time is assumed to consist of fluid fields of force which when disturbed create the particles that exist in our measurable systems. I think that the subquantum region consists of particles so small that they resemble continuous fields at the quantum level and there they are disturbed by outside events to form the particles we observe. They are not point particles since they would be then infinite. This subquantum level contains the greatest level of forces and so remains hidden from particle accelerators except for the secondary particles that are created when this level is disturbed. Current math approaches to perhaps describe this level are also more complicated so we await solutions from future investigators.
    Forceful regards.

  • Andrea Rossi

    Raymond:
    A) several seconds
    B) no
    Warm Regards,
    A.R.

  • Andrea Rossi

    WaltC:
    1) I don’t know so far
    Thank you for your suggestion anyway,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Jorge Alberto: we didn’t make any new version of this blog. Probably you are referring to
    http://www.rossilivecat.com
    They surely will read your comment here,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Exe:
    We will be in the facility of our Customer, cannot act as if we were in our premises; thank you for the link,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Svein H. Vormedal:
    Thank you for your suggestion,
    Warm Regards,
    A.R.

  • Svein H. Vormedal

    Dear Andrea
    Please let the light be enlightening and not dazzling by letting the light illuminate your work,
    do not hide this by dazzling the one who is trying to see the possibilities that exist.
    Regards,
    Svein H. Vormedal

  • Exe

    Sorry, I forgot the link to the web mention:

    https://www.centennialbulb.org/cam.htm

  • Exe

    Dear Dr. Rossi,

    In the following web you can find the webcan to the eldest lamp still working:

    https://www.centennialbulb.org/cam.htm

    Have you thought of doing something similar to keep the lamp that you will use at the demonstration working for a period of a few days or weeks? Maybe even until the first unit reach the market as a marketing strategy.

    Greating.

    Exe

  • Jorge Alberto

    Dear Dr. Rossi

    My Google Chrome is unable to translate the new version of this blog.

  • WaltC

    Dr Rossi,

    1) Are you planning to release a basic Ecat-SKL that outputs electricity only, at its native, unconditioned Voltage(s) & Current(s)?

    The analogy to this are solar modules which are sold independent of power conditioning and whose native outputs are conditioned by other manufacturers’ equipment (DC-AC solar inverters or DC-DC converters) depending on the end-user’s needs.

    I’m truly enthusiastic about your current SKLed plans, by the way. It should really be a ground-breaking product!

    Thanks, WaltC

  • Raymond

    Mr. Rossi,
    Sorry if this is answered before (could not find..):
    A) How long is the startup time of the SKLed, from pluging in to full powered light?
    B) Any problems with frequent starts/stops?
    Thanks and Regards,
    Ray.

  • Andrea Rossi

    Silver:
    I agree,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rinus: I see what I can do.
    Warm Regards,
    A.R.

  • You said that you would present a picture and specs of the eCat LED in about 10 days.
    That would be around April the 1st.
    😉

  • Mark U

    Dear Luong,
    You asked why the heck a luxometer would break down at the SKLed demonstration measurement.
    Indeed, it is a very unlikely scenario to contemplate, in fact it was a pretty stupid way for me to give attention to the complications of using a luxometer to measure total power output. One has to account for the light ‘temperature’ spectrum, the light intensity distribution, the distance of the luxometer from the light source and whether the lamp is considered a point source, all of which play a part in the mathematical calculations of total luminous power. (But I’m glad it brought somebody with some expertise with light out of the woodwork.) Why not supplement the above rather complicated procedure with a simple visual comparison of the SKLed to an established LED light source of comparable power and light temperature output? When I get my SKLeds, that’s what I’ll be doing and as I show it to family and friends.

  • Silver

    Dr Rossi,
    The measurements you have described are perfect, as well as the comment of Dan Galburt published in this blog on 2021 03 18 at 10:30
    Ad majora !
    Silver

  • Andrea Rossi

    Luca:
    Thank you for the suggestion,
    Warm regards,
    A.R.

  • Andrea Rossi

    Gregha:
    No
    Warm regards,
    A.R.

  • Luca

    Just an idea: is it possible to put a label or something written on your Ecat SKLed, to commemorate this first issue of a mass product with the Ecat technology?

  • Jitse

    Erik Woudenberg,
    I use the translation function, to better understand the sometimes difficult English texts.
    Kind regards.
    Jitse

  • gregha

    Any update on your date to show the photo?

  • CC

    Stefan:
    Why would you need to know how much current consumes every component inside the Ecat SKLed ? The important is to know how much current consumes it in total.
    Best,
    CC

  • Andrea Rossi

    Eric A Woundenberg:
    Thank you for your help, you are making a great job,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Carlen:
    Thank you for your proposal.
    I am interested to know more about it.
    Maybe you can email to info@leonardocorp1996.com to start a discussion to see how we can help your organization,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stefano
    What we measure is the total consume of the lamp all combined. There are not other sources of energy. From the lamp exits only one wire that goes to the plug, therefore measuring the electricity passed through the Wattmeter put at the plug, we know the total amount of electricity consumed. If there is around some idiot that thinks inside the lamp there is hidden a battery, just consider that the lamp total weight is 200 grams and is contained in a body that measures cm 15 x 10 x 10 and that the measurements at the presentation will go ahead 24 hours, while the Customer will continue to make them permanently.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Anonymous:
    Please see paragraph 2.4, equations 15, 16, 17 in page 4 of
    http://www.researchgate.net/330601653_E-Cat_SK_and_long_range_particle_interactions
    Warm Regards,
    A.R.

  • Andrea Rossi

    gregha:
    Not yet,
    Warm Regards,
    A.R.

  • gregha

    Will we be seeing a photo of the SKLed today?

  • Anonymous

    Dr Rossi,
    How is ruled the Zitterbewegung geometric phase in the theoretical hypothesis you make for the Ecat SK ? Can you answer ?

  • Stefano

    Dear Dr. Rossi,
    I understood the third party will measure the watt consumed by the ecat and the lumen of the LED lamps. Did I miss a wattmeter on the output? I think V and A and W consumed by the lamps should be also showed. Isn’t it?
    Have a good continuation and I wish all the best success.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>