– How many Ecat-SKL devices do you currently have (counting the demo unit) that are functionally equivalent to the one you plan to demo on December 9?
– If you can’t answer specifically, is it at least more than 1?
Giuseppe:
No, my feeling is that everybody must give the maximum he can in his specific sphere of operation. Nobody can make miracles, but there is not foreseeable limit to what a team can achieve.
Warm Regards,
A.R.
Dear Andrea
I now have several hand tools with 18 volt motor and a 4ah battery.
Many millions of such batteries must have been produced. The battery here could power an Ecat SKLed for 18 hours.
By equipping the combination with a solar cell of approx. 0.1 m2, the battery would be charged by the light of a normal day.
Thereby we have a self-supplementing street lamp. Demonstrating this on December 9 could get attention.
Sincerely, Svein H. Vormedal
Dear Dr Rossi,
Months ago you mentioned that the power output of the E-Cat SKL was not smooth enough to power electric motors but the problem could be solved by using electric batteries to power motors and use the SKL to charge the batteries. Is this solution still relevant or have you fixed the problem?
Best Regards,
Iggy
Dear Dr. Rossi,
you have decided to publicly sell the heat generated by Ecat-SK: http://ecatorders.com/heat-for-industry
But this site is by no means sufficient to advertise the Ecat-SK.
How do interested people find that page?
Nobody will ever find it.
If the Cat-SK works, it should be presented to the world “urbi et orbi” with presentations in all media, with newspaper advertisements, with lectures, etc. etc. in a way to make it known to a vast audience.
The world needs a device like the Cat-SK NOW.
We cannot afford to wait for someone to accidentally arrive on an anonymous page.
Kind Regards,
Italo R.
Hi Andrea, I get the impression that there are once again very powerful stakeholders who are standing in the way of launching your product through normal market forces.
Hopefully the deliveries of the devices we ordered will not be really jeopardized.
Can I possibly, and in the worst case, get a few second-hand demonstration devices?
Gerard McEk:
1. USA
2. depends on the situation
3. depends on the situation
4. see 2
5. depends on the situation
6. same as 5
7. 1000 sq ft
8. depends on the sitiation
9. depends on the situation
Warm Regards,
A.R.
Consider eCat technology used in Commercial Aircraft. I would suspect that it would first be used in the long-distant freight aircraft (e.g. FedEx, DHS, etc).
My concept is a Commercial Aircraft, run on batteries which supply sufficient energy for takeoff and landings, go-arounds. The eCat unit(s) would continuously recharge the aircraft battery both in the air and on the ground.
For a 747 class aircraft, I would estimate that a 100 MW eCat generator would be required — Average power consumption for a 747 Freight aircraft is around 121 MW.
I assumed freight aircraft would be first as their long-duration makes the eCat approach much more economical and Government approval would likely be faster.
Given a 95% efficiency, about 5 MW of excess heat would need to be removed. In the air, it is less of a problem if the excess heat could be used to de-ice the aerodynamic surfaces (i.e., wings). On the ground, probably just discharging the warmed air would be sufficient.
Question: Is a 100 MW eCat feasible – assuming it is made up of many smaller subsystems?
Dear Andrea,
Today I noticed your advertisement on ECW for your sales of heat (http://ecatorders.com/heat-for-industry)
I’m not sure since when that appeared, but it seems you are now promoting the heat-line (Ecat SK)more actively as well. I’m sure readers of ECW could help you with it and I believe it would be wise to provide a bit more information about the SK to help us with that.
I hope you can give answers to the following questions.
1. Industry in which countries/continents can apply for this?
2. What is the range of heat you can offer?
3. What media can be used to transport the heat? (water, steam, other?)
4. What is the range of power you can offer?
5. What is the minimum reduction in price compared to natural gas you think you can offer? (%)
(I guess the customer needs to accommodate all heat service arrangements at their premises):
6. What is the electrical power connection that is required (kW/MW-heat)
7. What is the required surface and height needed per MW?
In the Netherlands I think of approaching greenhouse owners by telephone because I would think that both heating and light (SKLed) can be nicely combined and would be greatly beneficial in greenhouses during wintertime. I would try to get them interested and then bring them in contact with you.
8. Are there any other important issues like minimum contract duration, that should be mentioned?
9. What would be minimum delivery time for a heating installation per MW?
I think that you might not want to reveal some details for commercial reasons, but it might also be very beneficial for you if a considerable number of interested ECW readers help you promoting your business. For us, these details are also interesting, obviously. However, for me the main reason is to help the world in finding an affordable, abundant, new energy source. And I hope its yours.
Kind regards, Gerard
Dear Dr Andrea Rossi,
An interesting blow to the so called Standard Model.
“Steril Neutrinos” have been hypothesized to explain anomalies of the S.M., interacting only with Gravity and not also with Weak Force, as standard neutrinos and anti-neutrinos do, but now the new results from the Micro-BooNE experiments at the US Department of Energy’s Fermi National Accelerator Laboratory deal a blow to the S.M., due to the fact that no hint at all of the supposed-to-exist Steril Neutrinos has been traced down, notwithstanding the huge amount of time and money spent for this research.
Comments ?
Prof
Cesare Ferrari:
Thank you for your trust in the work of our Team.
I am not able to answer. All we can do is to perform at our best the job we are doing.
Warm Regards,
A.R.
Caro Dott. Rossi,
una premessa: chiedo scusa a Lei e a tutti i lettori del blog per non aver scritto in inglese, ma, dato il contenuto piuttosto “delicato”, temo di non essere in grado di farmi comprendere da tutti, col mio inglese. Invito, semmai, un lettore italiano, che conosce bene l’inglese, a tradurre questa mia, in modo da renderla comprensibile a tutti ma, in maniera corretta; premesso ciò inizio:
Caro Dottor Rossi
ritengo che la Sua “invenzione” sia – al momento – una delle poche risposte reali ( forse …, l’unica?!?) alle pressanti richieste dei giovani che, come si evince dall’Ansa, di cui estratto sopra, erano presenti, anche, a Roma per manifestare il proprio dissenso nei confronti delle politiche energetiche delle grandi potenze mondiali, riassunti da Greta con un’espressione, già, ampiamente utilizzata dai media:
… bla, bla, bla.
In effetti, ne hanno ben donde, ad essere delusi dai comportamenti dei “Potenti”; Russia e Cina hanno disertato questo G20 – presenti solo fa remoto – e quest’ultima ha fatto sapere che: “ ha messo nella sua agenda politica. ..la “neutralità carbonica” . … in termini di emissioni, ma, entro il 2060” !!!!
Più che una risposta alle richieste dei giovani (ma non solo) sembra una presa in giro ed allora, scusi la mia improntitudine, ma azzarderei due proposte, una a Lei ed una ai lettori di questo blog; inizio con quella rivolta a Lei, segue quella ai lettori:
– ove Lei fosse sicuro al 99,9% che l’ Ecat SKL potrebbe essere avviato con una semplice dinamo da bicicletta e produrre “luce gratis e zero emissioni”, anche nel più sperduto angolo dell’Africa, potrebbe dedicare questa Sua geniale invenzione ai giovani del Mondo, quale prima reale risposta alle loro istanze?
– se avessimo una risposta affermativa dal Dottor Rossi, potremmo noi lettori attivarci – nel poco tempo che ci separa dalla presentazione del 9 dicembre p.v. – per diffondere, far conoscere, mettere al corrente i giovani, utilizzando tutti i mezzi d’informazione possibili, affinché il 9 dicembre partecipino in streaming alla presentazione dell’ Ecat SKL ? … se, poi, qualcuno di noi avesse qualche euro in più da spendere, potrebbe comperare qualche Ecat SKL da regalare ai giovani più poveri del Mondo, magari per illuminare scuole o improvvisati ospedali e regalare, così, un minimo di speranza.
Se i due punti sopra fossero condivisi, suggerirei al Dottor Rossi di organizzare una presentazione semplice, insomma la più universale possibile, perché non è detto che tutti i giovani che usano il cellulare siano anche istruiti. Nulla vieta di fare una seconda presentazione per gli esperti, per gli addetti ai lavori che hanno il desiderio e la curiosità scientifica di “penetrare” i dettagli dell’invenzione.
Infine, caro Dott. Andrea Rossi scusi la franchezza, ma il voltafaccia – a poco più di un mese – della Società che parrebbe aver condiviso con Lei ed il Suo gruppo, il lungo e faticoso sviluppo dell’ Ecat SKL, ha generato un po’ di sconcerto. Certo, la scelta aziendale, potrebbe anche essere comprensibile, ma non condivisibile, dato che in gioco non c’è il futuro di una Azienda, ma della TERRA e delle giovani generazioni, quindi un po’ più di coraggio, sarebbe stato apprezzato molto di più.
Infine una preghiera: si sforzi, se può, di esprimere una risposta, un po’ più articolata, a questa mia.
Grazie, comunque, per quanto fatto fin qui.
Cesare
I just saw the following video from Boston Dynamics and I remembered you and some other readers appreciated their previous one, so here is the latest one : https://www.youtube.com/watch?v=XnZH4izf_rI
We are 40 days from the demo on 9. december.
I can’t wait to see your YouTube video from the demo.
Everything is ready ?
You reference: [32] A. Kovacs et al. Maxwell-Dirac Theory and Occam’s Razor: Unified Field, Elementary Particles, and Nuclear Interactions. July 2019. ISBN: 978-952-94-2092-6.
This book also contains the papers [8] and [9] that you also reference in your ResearchGate paper, these papers are likely closely linked to the science underlying the E-Cat.
A revised version of this book was due earlier this year but was never released, it appears that there is sufficient advancement in knowledge for a full follow up to this book instead of just a revision. A new book is due for release on February 12th 2022 published by World Scientific Europe Ltd:
Unified Field Theory and Occam’s Razor: Simple Solutions To Deep Questions
By: Andràs Kovàcs, Giorgio Vassallo, Paul O’Hara, Francesco Celani and Antonino Oscar Di Tommaso
ISBN-13: 978-1800611290
The synopsis on Amazon (pre-order page) is as follows:
“Unified Field Theory was an expression first used by Einstein in his attempt to unify general relativity with electromagnetism. Unified Field Theory and Occam’s Razor attempts to provide real answers to foundational questions related to this unification and should be of high interest to innovative scientists. A diverse group of contributing authors approach an old problem with an open-mindedness that presents a new and fresh perspective. The following topics are discussed in detail in the hope of a fruitful dialogue with all who are interested in this subject: This highly original book brings together theoretical researchers and experimentalists specialized in the areas of mathematics and epistemology, theoretical and experimental physics, engineering, and technology. For years they have worked independently on topics related to the foundations and unity of physics and have had numerous overlapping ideas in terms of using Clifford Algebra and spinors. Within the book, new technology applications are outlined and theoretical results are complemented by interpretations of experimental data.”
The synopsis on the publisher’s worldscientific.com website has further detail of the topics discussed and a list of the book contents.
At 398 pages it’s going to be a long read, hopefully providing further explanation and detail of the underlying science that your E-Cat technology is likely based on. Also it will be interesting to see what is within the “new technology applications are outlined” part of the book.
Dear Mr. Rossi,
a few questions about the presentation of the Ecat SKL:
1) Do you name the price or at least a price-range?
2) Will you be able to deliver the Ecat SKL immediately after the finished certification?
(Because you build up a production line meanwhile the certification process)
3) When we can preorder the Ecat SKL? Which month or season in 2022?
Best regards
Franz
Hermes Atar Trismegistus:
Thank you for your wishes.
I prefer not to anticipate the content of the presentation.
You will be able to send your questions in the Q&A session that we will lonk to the video.
Warm Regards,
A.R.
The presentation of the E-Cat SKLed and E-Cat SKL is closing. For those in the world who are sleeping, when you do your streamed presentation:
2) Do you plan to record a copy and put on Youtube or similair video outlets?
3) I wish you best luck with your presentation and you need to use two ampere meters and two voltage meters to show your E-Cat SKL use of reactive input power and reactive output power, beside the usually wattmeter metering the input and output power.
4) Will you show your E-Cat SKL powering inductive loads like motors? beside powering resisitive loads like heat radiators?
5) An electric heat radiator does not need a special waveform to function, like 50 or 60 Hz sinewave. The cost for a 2 KW Heat radiator is 50 US Dollar in Sweden. Do you plan to build the E-Cat SKL in a small box and power the 2 KW Heat radiator?
6) As I see it, the E-Cat SKL without a sinewave output is ideal for power Heat radiators and use on board charger for electrical automobiles and doesn’t need to drive an inductive load.
Hi Andrea, I was remembering from my days of studying history that the introduction of a great new technology is often accompanied by a lavish display. In 1901, electric lighting was beautifully shown off in stunning ways at the Pan American Exposition. In 1844, Samual Morse dramatically set up a telegraph and sent a message from Baltimore to Washington DC.
These moments were important for allowing people to grasp an important new technology. Without these events, people might assume that this technology was unreliable or non-existent.
Obviously creating such events is not what you do, but I wonder whether there exist people reading your blog who might have the experience, ability, and inspiration to do something important and dramatic to get the word out about your work.
Hello DR Rossi
This is an interesting History
Video about Mathematics involving
some of your fellow Country Men.
https://youtu.be/cUzklzVXJwo
Regards
Sam
Dr Rossi,
– How many Ecat-SKL devices do you currently have (counting the demo unit) that are functionally equivalent to the one you plan to demo on December 9?
– If you can’t answer specifically, is it at least more than 1?
Best regards to you and your team,
WaltC
Prof:
Thank you for the statistics update,
Warm Regards,
A.R.
Dear Dr Rossi,
Checking the stats of your papers on
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
here are the more and more stunning numbers:
Readings: 77 000
Recommendations: 6 000
Total Research Interest index: 1 575
Citations: 28
…and counting
Cheers
Prof
Giuseppe:
No, my feeling is that everybody must give the maximum he can in his specific sphere of operation. Nobody can make miracles, but there is not foreseeable limit to what a team can achieve.
Warm Regards,
A.R.
Dear Andrea,
do you feel like telling people hoping for COP26 “Don’t worry, the E-cat is coming”.
Best Regards, Giuseppe
Svein H. Vormedal:
Thank you for the suggestion,
Warm Regards,
A.R.
Dear Andrea
I now have several hand tools with 18 volt motor and a 4ah battery.
Many millions of such batteries must have been produced. The battery here could power an Ecat SKLed for 18 hours.
By equipping the combination with a solar cell of approx. 0.1 m2, the battery would be charged by the light of a normal day.
Thereby we have a self-supplementing street lamp. Demonstrating this on December 9 could get attention.
Sincerely, Svein H. Vormedal
Keon Vandewalle:
The lamps are already for sale, see http://www.ecat.com
In 2022 I think also the SKL will be for sale.
Warm Regards,
A.R.
Italo R.:
Thank you for your suggestion,
Warm Regards,
A.R.
Iggy Dalrymple:
This solution can be still relevant,
Warm Regards,
A.R.
Dear Dr Rossi,
Months ago you mentioned that the power output of the E-Cat SKL was not smooth enough to power electric motors but the problem could be solved by using electric batteries to power motors and use the SKL to charge the batteries. Is this solution still relevant or have you fixed the problem?
Best Regards,
Iggy
Dear Dr. Rossi,
you have decided to publicly sell the heat generated by Ecat-SK:
http://ecatorders.com/heat-for-industry
But this site is by no means sufficient to advertise the Ecat-SK.
How do interested people find that page?
Nobody will ever find it.
If the Cat-SK works, it should be presented to the world “urbi et orbi” with presentations in all media, with newspaper advertisements, with lectures, etc. etc. in a way to make it known to a vast audience.
The world needs a device like the Cat-SK NOW.
We cannot afford to wait for someone to accidentally arrive on an anonymous page.
Kind Regards,
Italo R.
Hi Andrea, I get the impression that there are once again very powerful stakeholders who are standing in the way of launching your product through normal market forces.
Hopefully the deliveries of the devices we ordered will not be really jeopardized.
Can I possibly, and in the worst case, get a few second-hand demonstration devices?
With kind regards,
Koen
Steve Swatman:
1- yes
2- no
Warm Regards,
A.R.
Gerard McEk:
1. USA
2. depends on the situation
3. depends on the situation
4. see 2
5. depends on the situation
6. same as 5
7. 1000 sq ft
8. depends on the sitiation
9. depends on the situation
Warm Regards,
A.R.
Steven N. Karels:
Thank you for your insight, but, as I already said, aerospace is not presently a possible field od application.
Warm Regards,
A.R.
Dear Andrea Rossi,
Consider eCat technology used in Commercial Aircraft. I would suspect that it would first be used in the long-distant freight aircraft (e.g. FedEx, DHS, etc).
My concept is a Commercial Aircraft, run on batteries which supply sufficient energy for takeoff and landings, go-arounds. The eCat unit(s) would continuously recharge the aircraft battery both in the air and on the ground.
For a 747 class aircraft, I would estimate that a 100 MW eCat generator would be required — Average power consumption for a 747 Freight aircraft is around 121 MW.
I assumed freight aircraft would be first as their long-duration makes the eCat approach much more economical and Government approval would likely be faster.
Given a 95% efficiency, about 5 MW of excess heat would need to be removed. In the air, it is less of a problem if the excess heat could be used to de-ice the aerodynamic surfaces (i.e., wings). On the ground, probably just discharging the warmed air would be sufficient.
Question: Is a 100 MW eCat feasible – assuming it is made up of many smaller subsystems?
Thoughts?
Dear Andrea,
Today I noticed your advertisement on ECW for your sales of heat (http://ecatorders.com/heat-for-industry)
I’m not sure since when that appeared, but it seems you are now promoting the heat-line (Ecat SK)more actively as well. I’m sure readers of ECW could help you with it and I believe it would be wise to provide a bit more information about the SK to help us with that.
I hope you can give answers to the following questions.
1. Industry in which countries/continents can apply for this?
2. What is the range of heat you can offer?
3. What media can be used to transport the heat? (water, steam, other?)
4. What is the range of power you can offer?
5. What is the minimum reduction in price compared to natural gas you think you can offer? (%)
(I guess the customer needs to accommodate all heat service arrangements at their premises):
6. What is the electrical power connection that is required (kW/MW-heat)
7. What is the required surface and height needed per MW?
In the Netherlands I think of approaching greenhouse owners by telephone because I would think that both heating and light (SKLed) can be nicely combined and would be greatly beneficial in greenhouses during wintertime. I would try to get them interested and then bring them in contact with you.
8. Are there any other important issues like minimum contract duration, that should be mentioned?
9. What would be minimum delivery time for a heating installation per MW?
I think that you might not want to reveal some details for commercial reasons, but it might also be very beneficial for you if a considerable number of interested ECW readers help you promoting your business. For us, these details are also interesting, obviously. However, for me the main reason is to help the world in finding an affordable, abundant, new energy source. And I hope its yours.
Kind regards, Gerard
Dear Dr Rossi.
The commercial presentation Dec 9th.
Will the presentation be managed and directed by marketing professionals?
Have you shown your SKLed to NASA for their appraisal, i would expect that for veg growth in space it would be ideal with such low power use?
looking forward to the presentation and receiving my lights.
best regards
Prof:
Ipse Dixit,
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
An interesting blow to the so called Standard Model.
“Steril Neutrinos” have been hypothesized to explain anomalies of the S.M., interacting only with Gravity and not also with Weak Force, as standard neutrinos and anti-neutrinos do, but now the new results from the Micro-BooNE experiments at the US Department of Energy’s Fermi National Accelerator Laboratory deal a blow to the S.M., due to the fact that no hint at all of the supposed-to-exist Steril Neutrinos has been traced down, notwithstanding the huge amount of time and money spent for this research.
Comments ?
Prof
WaltC:
We’ll see,
Warm Regards,
A.R.
Cesare Ferrari:
Thank you for your trust in the work of our Team.
I am not able to answer. All we can do is to perform at our best the job we are doing.
Warm Regards,
A.R.
Caro Dott. Rossi,
una premessa: chiedo scusa a Lei e a tutti i lettori del blog per non aver scritto in inglese, ma, dato il contenuto piuttosto “delicato”, temo di non essere in grado di farmi comprendere da tutti, col mio inglese. Invito, semmai, un lettore italiano, che conosce bene l’inglese, a tradurre questa mia, in modo da renderla comprensibile a tutti ma, in maniera corretta; premesso ciò inizio:
Caro Dottor Rossi
ritengo che la Sua “invenzione” sia – al momento – una delle poche risposte reali ( forse …, l’unica?!?) alle pressanti richieste dei giovani che, come si evince dall’Ansa, di cui estratto sopra, erano presenti, anche, a Roma per manifestare il proprio dissenso nei confronti delle politiche energetiche delle grandi potenze mondiali, riassunti da Greta con un’espressione, già, ampiamente utilizzata dai media:
… bla, bla, bla.
In effetti, ne hanno ben donde, ad essere delusi dai comportamenti dei “Potenti”; Russia e Cina hanno disertato questo G20 – presenti solo fa remoto – e quest’ultima ha fatto sapere che: “ ha messo nella sua agenda politica. ..la “neutralità carbonica” . … in termini di emissioni, ma, entro il 2060” !!!!
Più che una risposta alle richieste dei giovani (ma non solo) sembra una presa in giro ed allora, scusi la mia improntitudine, ma azzarderei due proposte, una a Lei ed una ai lettori di questo blog; inizio con quella rivolta a Lei, segue quella ai lettori:
– ove Lei fosse sicuro al 99,9% che l’ Ecat SKL potrebbe essere avviato con una semplice dinamo da bicicletta e produrre “luce gratis e zero emissioni”, anche nel più sperduto angolo dell’Africa, potrebbe dedicare questa Sua geniale invenzione ai giovani del Mondo, quale prima reale risposta alle loro istanze?
– se avessimo una risposta affermativa dal Dottor Rossi, potremmo noi lettori attivarci – nel poco tempo che ci separa dalla presentazione del 9 dicembre p.v. – per diffondere, far conoscere, mettere al corrente i giovani, utilizzando tutti i mezzi d’informazione possibili, affinché il 9 dicembre partecipino in streaming alla presentazione dell’ Ecat SKL ? … se, poi, qualcuno di noi avesse qualche euro in più da spendere, potrebbe comperare qualche Ecat SKL da regalare ai giovani più poveri del Mondo, magari per illuminare scuole o improvvisati ospedali e regalare, così, un minimo di speranza.
Se i due punti sopra fossero condivisi, suggerirei al Dottor Rossi di organizzare una presentazione semplice, insomma la più universale possibile, perché non è detto che tutti i giovani che usano il cellulare siano anche istruiti. Nulla vieta di fare una seconda presentazione per gli esperti, per gli addetti ai lavori che hanno il desiderio e la curiosità scientifica di “penetrare” i dettagli dell’invenzione.
Infine, caro Dott. Andrea Rossi scusi la franchezza, ma il voltafaccia – a poco più di un mese – della Società che parrebbe aver condiviso con Lei ed il Suo gruppo, il lungo e faticoso sviluppo dell’ Ecat SKL, ha generato un po’ di sconcerto. Certo, la scelta aziendale, potrebbe anche essere comprensibile, ma non condivisibile, dato che in gioco non c’è il futuro di una Azienda, ma della TERRA e delle giovani generazioni, quindi un po’ più di coraggio, sarebbe stato apprezzato molto di più.
Infine una preghiera: si sforzi, se può, di esprimere una risposta, un po’ più articolata, a questa mia.
Grazie, comunque, per quanto fatto fin qui.
Cesare
Dr. Rossi,
1) Since the December 9th event will be at a location of your control, are you now considering having a small onsite audience?
— For instance, mainstream journalists, science and technology journalists, representatives from potential SKLed & SKL customers, independent certifiers, …
Xavier Pitz:
Thank you for the spectacular link !
Everything will be ready on December 9th,
Warm Regards,
A.R.
Dear Andrea,
I just saw the following video from Boston Dynamics and I remembered you and some other readers appreciated their previous one, so here is the latest one :
https://www.youtube.com/watch?v=XnZH4izf_rI
We are 40 days from the demo on 9. december.
I can’t wait to see your YouTube video from the demo.
Everything is ready ?
Best Regards,
Xavier Pitz
Anonymous:
Enough,
Warm Regardsm
A.R.
Dear Dr Andrea Rossi,
December 9th is looming.
Which percentage has the presentation to be made as scheduled ?
KeithT:
Thank you for this information.
Warm Regards,
A.R.
Sam:
Yes, but it should not affect us.
Warm Regards,
A.R.
Hello DR Rossi
Are you concerned with the
Global Chip Shortage with
your Products.
https://youtu.be/VJkhOhyqC1g
Regards
Sam
Dear Andrea,
Within your ResearchGate paper:
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
You reference: [32] A. Kovacs et al. Maxwell-Dirac Theory and Occam’s Razor: Unified Field, Elementary Particles, and Nuclear Interactions. July 2019. ISBN: 978-952-94-2092-6.
This book also contains the papers [8] and [9] that you also reference in your ResearchGate paper, these papers are likely closely linked to the science underlying the E-Cat.
A revised version of this book was due earlier this year but was never released, it appears that there is sufficient advancement in knowledge for a full follow up to this book instead of just a revision. A new book is due for release on February 12th 2022 published by World Scientific Europe Ltd:
Unified Field Theory and Occam’s Razor: Simple Solutions To Deep Questions
By: Andràs Kovàcs, Giorgio Vassallo, Paul O’Hara, Francesco Celani and Antonino Oscar Di Tommaso
ISBN-13: 978-1800611290
The synopsis on Amazon (pre-order page) is as follows:
“Unified Field Theory was an expression first used by Einstein in his attempt to unify general relativity with electromagnetism. Unified Field Theory and Occam’s Razor attempts to provide real answers to foundational questions related to this unification and should be of high interest to innovative scientists. A diverse group of contributing authors approach an old problem with an open-mindedness that presents a new and fresh perspective. The following topics are discussed in detail in the hope of a fruitful dialogue with all who are interested in this subject: This highly original book brings together theoretical researchers and experimentalists specialized in the areas of mathematics and epistemology, theoretical and experimental physics, engineering, and technology. For years they have worked independently on topics related to the foundations and unity of physics and have had numerous overlapping ideas in terms of using Clifford Algebra and spinors. Within the book, new technology applications are outlined and theoretical results are complemented by interpretations of experimental data.”
The synopsis on the publisher’s worldscientific.com website has further detail of the topics discussed and a list of the book contents.
At 398 pages it’s going to be a long read, hopefully providing further explanation and detail of the underlying science that your E-Cat technology is likely based on. Also it will be interesting to see what is within the “new technology applications are outlined” part of the book.
Regards,
Keith Thomson.
Franz:
1) not yet
2) no
3) probably Winter
Warm Regards,
A.R.
Dear Mr. Rossi,
a few questions about the presentation of the Ecat SKL:
1) Do you name the price or at least a price-range?
2) Will you be able to deliver the Ecat SKL immediately after the finished certification?
(Because you build up a production line meanwhile the certification process)
3) When we can preorder the Ecat SKL? Which month or season in 2022?
Best regards
Franz
Hermes Atar Trismegistus:
Thank you for your wishes.
I prefer not to anticipate the content of the presentation.
You will be able to send your questions in the Q&A session that we will lonk to the video.
Warm Regards,
A.R.
Dear Andrea Rossi,
1) I am not sure if you have read Peter Lindemans book: “The Free Energy Secrets of Cold Electricity?” Now it is on the web:
https://studfile.net/preview/8193634/page:5/
The presentation of the E-Cat SKLed and E-Cat SKL is closing. For those in the world who are sleeping, when you do your streamed presentation:
2) Do you plan to record a copy and put on Youtube or similair video outlets?
3) I wish you best luck with your presentation and you need to use two ampere meters and two voltage meters to show your E-Cat SKL use of reactive input power and reactive output power, beside the usually wattmeter metering the input and output power.
4) Will you show your E-Cat SKL powering inductive loads like motors? beside powering resisitive loads like heat radiators?
5) An electric heat radiator does not need a special waveform to function, like 50 or 60 Hz sinewave. The cost for a 2 KW Heat radiator is 50 US Dollar in Sweden. Do you plan to build the E-Cat SKL in a small box and power the 2 KW Heat radiator?
6) As I see it, the E-Cat SKL without a sinewave output is ideal for power Heat radiators and use on board charger for electrical automobiles and doesn’t need to drive an inductive load.
Best Wishes, Hermes
Thomas Florek:
You made a point, thank you for your opinion,
Warm Regards,
A.R.
Hi Andrea, I was remembering from my days of studying history that the introduction of a great new technology is often accompanied by a lavish display. In 1901, electric lighting was beautifully shown off in stunning ways at the Pan American Exposition. In 1844, Samual Morse dramatically set up a telegraph and sent a message from Baltimore to Washington DC.
These moments were important for allowing people to grasp an important new technology. Without these events, people might assume that this technology was unreliable or non-existent.
Obviously creating such events is not what you do, but I wonder whether there exist people reading your blog who might have the experience, ability, and inspiration to do something important and dramatic to get the word out about your work.
@Jennifer
After reading from page 3 to page 13 of
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
I think it is possible.
Best.
Jorge
@Sam,
Maybe the looming new physics can explain better the ZPE
Sam:
Thank you also for the link to the tantalizing evidence for new physics,
Warm Regards,
A.R.
Sam:
Thank you for the link to the “electron ice”,
Warm Regards,
A.R.
First photo of Electron ice
https://scitechdaily.com/physicists-snap-first-image-of-electron-ice-predicted-more-than-90-years-ago/
Hello DR Rossi
Possible new Physics
https://scitechdaily.com/new-force-of-nature-tantalizing-evidence-for-new-physics-from-cerns-large-hadron-collider/
Regards
Sam
Got it !
Thanks,
CC
CC:
Please see paragraph 1 on
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Warm Regards,
A.R.
Dear Dr Andrea Rossi:
Can you explain why you think the Casimir effect can play a role in the tunnel effect ?
Vincenzo Bonomo:
No, our Clients just want to avoid the storm of controversial discussions.
Warm Regards,
A.R.