If I were to order some ECATSKLeps for use in a residence here in Canada (110V AC). Will it be straightforward to plug it in to the system, or will I need extra equipment/wiring? And would it have to be done by a qualified electrician?
Specifications Ecat SKLep
Size: 7 x 7 x 9 cm (2.8″ x 2.8″ x 3.6″)
Weight: 250 grams (8.8 ounces)
Output voltage: 12V DC
Output power: 100W
Power supply: 12V DC
Power consumption: 1W
Power density: 0.23 kW/liter (0.23 MW per cubic meter)
Specific power: 0.4 kW/kg
Expected Operational Lifetime: 100,000 hours
Recyclable: Yes
Warranty: 3 years
Quindi se volessi ottenere 240 Vac per alimentare la mia casa dovrei collegare, al fine di ottenere almeno 3kW, quanti e come (serie e/o paralleo) SKLep? Dovrei usa un inverter? se si, potrei usare l’inverter (ABB)del fotovoltaico da 4kw che ho già?
Grazie in anticipo per la gentile risposta.
From the specifications of the Ecat SKLEP I find:
Specifications Ecat SKLep
Size: 7 x 7 x 9 cm (2.8 ″ x 2.8 ″ x 3.6 ″)
Weight: 250 grams (8.8 ounces)
Output voltage: 12V DC
Output power: 100W
Power supply: 12V DC
Power consumption: 1W
Power density: 0.23 kW / liter (0.23 MW per cubic meter)
Specific power: 0.4 kW / kg
Expected Operational Lifetime: 100,000 hours
Recyclable: Yes
Warranty: 3 years
So if I wanted to get 240 Vac to power my house I would have to connect, in order to get at least 3kW, how many and how (series and / or parallel) SKLep? Should I use an inverter? if yes, could i use the 4kw photovoltaic (ABB) inverter that i already have?
Dear Andrea I pre-ordered 10 ECATSKlep because I strongly believe in your invention but unfortunately, I have to tell you that the presentation was disappointing. The tangle of cables on the table, no close-up of the device, the difficult visualization of the W power input and output do not make it clear to those who are not experts what you have achieved. At least you should have put a lamp or a fan powered by your system, so it will be difficult to reach the million bookings quickly. Have another COMMERCIAL presentation made by a “professional” and put it on youtube.
Neri
I watched your presentation several times this morning. It occurred to me that with an adequate water tank, the ECat could produce steam to energize a conventional steam engine. Many large steam locomotives have survived in near-new condition due to the care of collectors and museums. There are even model steam locomotive clubs that operate small steam engines that could probably run on the SKL and prove the concept. Now that’s a train that could be “Bound for Glory”.
And I intend to order one or more Ecat SKLep’s. You can do that here: https://ecatorders.com/
Just one remark about the “TERMS AND CONDITIONS FOR PRE-ORDER (of the Ecat SKLep)”: Although the Ecat SKLep is mentioned in the beginning, when I scroll down further in the document, the Ecat SKled is mentioned in stead of the Ecat SKLep. But that probably was caused by copying the terms and conditons from the Ecat SKled?
Hello Andrea Rossi, Congratulations on the presentation, how were the many EcatLEDs produced with which automation? who is behind the devices? was it called ABB? best regards Kay
Congratulations on your successful product introductions.
It would be useful to follow-up with customer product application videos showing, for example, an e-cat SKLep powering 10+ SKLeds.
As I understand the SKLep control mechanism, one controller can handle multiple SKLep units. Is this correct? So, if i need to power a ceramic 1000 Watt heater, I would want to order a configuration of at least 10 SKLeps. I am suggesting that customers need to specify the their target application and the amount of watts required for Leonardo Corporation to build the required e-cat SKLep configuration.
Your product brilliance is in the small 100 watt design. Dr. Patterson did build a 1kW Patterson Power Cell, but it burnt out after a short run. You have avoided the problem of scaling up the SKLep by combining smaller units to increase power output. Bravo!
Looking forward to ordering many SKLeds and SKLeps from Leonardo Corporation.
Gianvico Pirazzini:
OK
ALSO
EVERYBODY GO TO http://www.ecat.com
than click on “Deacember 9 event” (the yellow square link at the top left)
and you will get the video !
We are struggling against a mess due to an overcrowding. But we are recovering
Andrea Rossi
Dear Dr. Rossi,
in the description of the SKLed you describe that the SKLed produces the same amount of lumens as a 100W standard LED.
However, in your presentation, SKLed has 167 lux versus more than 800 lux for the 100 W standard LEd. Can you explain this?
Thank you very much.
All out Readers that have difficulty to watch the presentation video:
PLEASE CLICK ON THE LINK PUBLISHED HERE BY FRANK ACLAND at 9:30 JUST CLICK UPON IT AND YOU ALL WILL SEE THE VIDEO
Andrea Rossi
There is an overcrowding in the lines, be pations, we aree doing anything to resolve. Anyway the video will last for ever, so everybody will get it
See the comment of Frank Acland of 9:30 am to try an alternative link,
Warm regards,
A.R.
Praying that this E-Cat SKL’s presentation will be most fruitful for you, your team and the whole world.
Thank you and your team for all the sacrifices made these many years to make this happen.
God Bless you all.
Brokeeper
Hi Andrea, I did not participate to live streaming because I couldn’t, I was busy.
Will the video be posted on youtube or another platform?
I would be grateful if I could see it.
I follow you by ten years, I think that you will succed.
Good luck with your invention.
Hi Andrea, good luck with the Presentation later today.
I hope that I have succeeded in ordering one EcatSKLep (The electricity generator). This order swapped from an earlier order for for an EcatSKLed (accepted and confirmed by email from info@leonardocorp1996.com). I was advised that the best way to confirm my order for the EcatSKLep (The electricity generator) was to post here. This is my fifth attempt, so I hope this reaches you!
Please take a minute to confirm acceptance of my order before things get really busy with the presentation.
Regards and ‘Lauda finem’
Mike Williams
Dear Andrea:
If I were to order some ECATSKLeps for use in a residence here in Canada (110V AC). Will it be straightforward to plug it in to the system, or will I need extra equipment/wiring? And would it have to be done by a qualified electrician?
Thank you for the clear specifications.
Rodney.
Am very happy with the presented lamp and power generator. It was a long drive ( 10 years ) but worth it. Congratulations from the Netherlands
Dalle specifiche dell’Ecat SKLEP trovo:
Specifications Ecat SKLep
Size: 7 x 7 x 9 cm (2.8″ x 2.8″ x 3.6″)
Weight: 250 grams (8.8 ounces)
Output voltage: 12V DC
Output power: 100W
Power supply: 12V DC
Power consumption: 1W
Power density: 0.23 kW/liter (0.23 MW per cubic meter)
Specific power: 0.4 kW/kg
Expected Operational Lifetime: 100,000 hours
Recyclable: Yes
Warranty: 3 years
Quindi se volessi ottenere 240 Vac per alimentare la mia casa dovrei collegare, al fine di ottenere almeno 3kW, quanti e come (serie e/o paralleo) SKLep? Dovrei usa un inverter? se si, potrei usare l’inverter (ABB)del fotovoltaico da 4kw che ho già?
Grazie in anticipo per la gentile risposta.
From the specifications of the Ecat SKLEP I find:
Specifications Ecat SKLep
Size: 7 x 7 x 9 cm (2.8 ″ x 2.8 ″ x 3.6 ″)
Weight: 250 grams (8.8 ounces)
Output voltage: 12V DC
Output power: 100W
Power supply: 12V DC
Power consumption: 1W
Power density: 0.23 kW / liter (0.23 MW per cubic meter)
Specific power: 0.4 kW / kg
Expected Operational Lifetime: 100,000 hours
Recyclable: Yes
Warranty: 3 years
So if I wanted to get 240 Vac to power my house I would have to connect, in order to get at least 3kW, how many and how (series and / or parallel) SKLep? Should I use an inverter? if yes, could i use the 4kw photovoltaic (ABB) inverter that i already have?
Thank you in advance for your kind answer.
Dear Andrea I pre-ordered 10 ECATSKlep because I strongly believe in your invention but unfortunately, I have to tell you that the presentation was disappointing. The tangle of cables on the table, no close-up of the device, the difficult visualization of the W power input and output do not make it clear to those who are not experts what you have achieved. At least you should have put a lamp or a fan powered by your system, so it will be difficult to reach the million bookings quickly. Have another COMMERCIAL presentation made by a “professional” and put it on youtube.
Neri
Dear Dr. Rossi,
I watched your presentation several times this morning. It occurred to me that with an adequate water tank, the ECat could produce steam to energize a conventional steam engine. Many large steam locomotives have survived in near-new condition due to the care of collectors and museums. There are even model steam locomotive clubs that operate small steam engines that could probably run on the SKL and prove the concept. Now that’s a train that could be “Bound for Glory”.
Best wishes for continued success,
Neal Chaves
To all,
I saw the video by searching for “Ecat SKLep” on the home page of Youtube ( https://www.youtube.com/ )
But a direct link also is given on the website of e-catworld: (see: https://e-catworld.com/2021/12/08/dec-9th-ecat-presentation-thread/ ):
https://www.youtube.com/channel/UC-q3RyFx45IpxaIL-2xb_0A
And I intend to order one or more Ecat SKLep’s. You can do that here: https://ecatorders.com/
Just one remark about the “TERMS AND CONDITIONS FOR PRE-ORDER (of the Ecat SKLep)”: Although the Ecat SKLep is mentioned in the beginning, when I scroll down further in the document, the Ecat SKled is mentioned in stead of the Ecat SKLep. But that probably was caused by copying the terms and conditons from the Ecat SKled?
Kind Regards,
Daniel.
Hello Andrea Rossi, Congratulations on the presentation, how were the many EcatLEDs produced with which automation? who is behind the devices? was it called ABB? best regards Kay
Dear Dr. Rossi,
Congratulations on your successful product introductions.
It would be useful to follow-up with customer product application videos showing, for example, an e-cat SKLep powering 10+ SKLeds.
As I understand the SKLep control mechanism, one controller can handle multiple SKLep units. Is this correct? So, if i need to power a ceramic 1000 Watt heater, I would want to order a configuration of at least 10 SKLeps. I am suggesting that customers need to specify the their target application and the amount of watts required for Leonardo Corporation to build the required e-cat SKLep configuration.
Your product brilliance is in the small 100 watt design. Dr. Patterson did build a 1kW Patterson Power Cell, but it burnt out after a short run. You have avoided the problem of scaling up the SKLep by combining smaller units to increase power output. Bravo!
Looking forward to ordering many SKLeds and SKLeps from Leonardo Corporation.
Best Regards,
Daniel G. Zavela
Luis Navarro:
Yes, but now everything is working:
1- THE SITE OF ECATWORLD IS WORKING REGULARLY
2- THE FASTEST LINK IS
https://ecat.com/dec-9-event
Wilfried Babelotzky:
go to
http://www.ecat.com
then click on the yellow icon “Dec 9 Event”
A.R.
Dan Galburt:
We are experiencing overcrowding, but you can go to
http://www.ecat.com
then click the yellow icon “December 9 event”
A.R.
Dave Haws:
Yes, go to
http://www.ecat.com
then click on the yellow icone “December 9 event”
Frank Acland: thank you for the link to the video !
A.R.
Go to
http://www.ecat.com
then click December 9 Event
You must look at the efficiency, as it has been expleined
A.R.
I saw the presentation.
The best part are the reports from the University of Bologna which tested both SKLed and SKLep devices.
https://ecatorders.com/wp-content/uploads/2021/12/SKL-MISURE-UNIBO.pdf
https://ecatorders.com/wp-content/uploads/2021/12/MISURE-UNIBO-SKLED.pdf
How can we not believe them?
I can only say one thing. a new era has begun!
My Best Regards,
Italo R.
Gianvico Pirazzini:
OK
ALSO
EVERYBODY GO TO
http://www.ecat.com
than click on “Deacember 9 event” (the yellow square link at the top left)
and you will get the video !
We are struggling against a mess due to an overcrowding. But we are recovering
Andrea Rossi
This link is wrong: https://www.youtube.com/watch?v=r4_NyylZq70
This link is right: https://youtu.be/r4_NyyIZq70
Good luck to everyone
Gianvico
Dear Dr. Rossi,
in the description of the SKLed you describe that the SKLed produces the same amount of lumens as a 100W standard LED.
However, in your presentation, SKLed has 167 lux versus more than 800 lux for the 100 W standard LEd. Can you explain this?
Thank you very much.
Try this link, it worked for me. https://www.youtube.com/channel/UC-q3RyFx45IpxaIL-2xb_0A
All out Readers that have difficulty to watch the presentation video:
PLEASE CLICK ON THE LINK PUBLISHED HERE BY FRANK ACLAND at 9:30 JUST CLICK UPON IT AND YOU ALL WILL SEE THE VIDEO
Andrea Rossi
There is an overcrowding in the lines, be pations, we aree doing anything to resolve. Anyway the video will last for ever, so everybody will get it
See the comment of Frank Acland of 9:30 am to try an alternative link,
Warm regards,
A.R.
SONO PRESTO LE 15 E 30 MA NON SI RIESCE AD ENTRTARE NEL LINK. ???????
https://youtu.be/r4 NyylZq70. ????
Dear Andrea,
E-Cat World website is experiencing problems. Below is the link to the Ecat Presentation of December 9th.
https://youtu.be/r4_NyyIZq70
Thank you,
Frank Acland
The link: https://youtu.be/r4_NyylZq70 is not working. Is there another link?
Dear Dr Rossi,
at 12/9 9:13AM Miami time I cannot access your presentation video
When I click on your link Youtube says video no longer available.
E-Cat World site appears to be down
Dan Galburt
Dear Andrea,
I am so sad, as “Error establishing a database connection” while I try to see your presentation from Germany 🙁
Kind regards,
Wilfried
E-CATWorld site si crashed.
Do you know the link for the presentation?
Thanks
UNABLE TO CONNECT TO ANY OF THE ROSSI RELATED WEB PAGES AND E-CAT WORLD DOWN AS WELL.
OBVIOUSLY A SERIOUS ATTACK IS BEING CARRIED OUT!!!
Andrea Rossi
I’m not seeing the presentation, the youtube link looks like it’s down, https://youtu.be/r4_NyylZq70
Thanks
John C Evans
I can’t watch the presentation. YouTube says that the video is no longer available…
Am I the only one?
No video anywhere
https://youtu.be/r4_NyylZq70
This video is no longer available.
???
Dear Andrea,
Praying that this E-Cat SKL’s presentation will be most fruitful for you, your team and the whole world.
Thank you and your team for all the sacrifices made these many years to make this happen.
God Bless you all.
Brokeeper
Dear Andrea,
Good luck with the presentation of the SKLed and EKLep!
May the number of orders overwhelm you.
Kind regards, Gerard
Hi Andrea, I did not participate to live streaming because I couldn’t, I was busy.
Will the video be posted on youtube or another platform?
I would be grateful if I could see it.
I follow you by ten years, I think that you will succed.
Good luck with your invention.
Mike Williams:
Your order has been received. You should have received the receipt confirmation.
Warm Regards,
A.R.
Pierino Sacchero:
Thank you for your support,
Warm Regards,
A.R.
Anonymous:
Yes,
Warm Regards,
A.R.
CC:
No,
Warm Regards,
A.R.
Luciano:
Thank you for your support,
Warm Regards,
A.R.
Hans-Joachim Dr Muller:
Thank you for your support,
Warm Regards,
A.R.
Dear Dr.Rossi,
I have observed your work since 2011 with strong interest. Now I am 82 years old and I hope and wish you today the finally breakthrough and success.
All the best for you
Hans-Joachim Müller
Dear Dr Andrea Rossi:
Do you think the presentation of today will raise a mass media effect ?
In bocca al lupo per oggi dott. Rossi! La seguo da molti anni con interesse e sincera fiducia. Un saluto a Lei. Complimenti per la sua tenacia!
Hi Andrea, good luck with the Presentation later today.
I hope that I have succeeded in ordering one EcatSKLep (The electricity generator). This order swapped from an earlier order for for an EcatSKLed (accepted and confirmed by email from info@leonardocorp1996.com). I was advised that the best way to confirm my order for the EcatSKLep (The electricity generator) was to post here. This is my fifth attempt, so I hope this reaches you!
Please take a minute to confirm acceptance of my order before things get really busy with the presentation.
Regards and ‘Lauda finem’
Mike Williams
Dr Rossi:
Can we find the links to watch the presentation also in
http://www.ecat.com
and on E-Catworld ?
Oggi è un grande giorno…
I miei piú fervidi Auguri!
Mario Peters:
Thank you for your support,
Warm Regards,
A.R.
Luis Navarro:
Muchas Gracias !
Warm Regards,
A.R.