Dear Dr. Rossi,
You wrote that the SKLep is not suitable for working in a vacuum. Does this mean for example that it can never be used outside the Earth, in space, on satellites or on the Moon?
Dr. Rossi: your reply today to Frank Acland makes me think mass producing skleps will more difficult than you anticipated. Am I right?
Regards, Espen VDP
I have a question about your modified order priority rules.
For example: A company actually in position 155,000 in order list will order 100,000 ECats pieces each month. And it will do so after the sum of all orders exceeds 1 million pieces. Does this mean that customers in the position 500,000 or 700,000 will never receive an ordered ECats or will receive it after 5 years?
I considered your modified priority rules as not fair. I just need to be clear on this.
I wish you much success and millions of delivered ECats
Hi Andrea,
during the 9 dec event, we can see that when you disconnect the ecat supply the light immediately turns off and the power consumption remains the same as before, this is well explainable consulting the block schematic of the setup: the AI is feeded directly from the energy generated by the ecat.
The one thing that I cannot explain is why when you reconnect the supply to the ecat the light instantly turns on, while the AI should need a while for the bootstrap. May we say that for some instants the ecat works without the support of AI?
for most technical products, manuals with technical drawings, descriptions of the interfaces, etc. or at least data sheets with corresponding drawings are available for download so that potential buyers can get an idea of the usability of the product in advance.
Is there something like that for the ECAT SKLep as well?
Dear Andrea,
Do you still consider also to generate electricity and sell it in the future?
(Some years ago you intended to sell heat with your previous Ecat products and not sell the units.)
If not, can you tell us what the main reason is for this change of mind?
Thank you, kind regards, Gerard
I notice that the image of the device has fewer connectors than the prototype used in the demo.
I think there are two female connectors on one side and I think you mentioned before there are 2 male connectors on the other side which allows them to be connected in series Lego style. Is this correct?
I suppose it’s a simplification as they maybe complex connectors but I suppose one of the pair is used for input and the other for output. Or one of the pairs used for power and the other for control.
In the more complex demo arrangement the out put to the load came directly from the SKLEP.
Is this also the case for the final product or in that case will the power output come via the controller? So basically what ever the assembly we just need to connect to the controller for out put?
Myriam:
We made the measurements with the geiger for more than 10 years in all our experiments and never have detected ionizing radiations emitted by the Ecats.
Warm Regards,
A.R.
is it also quite easy for the new ecat models to chain them and scale them up to, let’s say, 100 pieces, in a “container”, which, itself, would be then a bigger generator?
Dear Dr Andrea Rossi,
I watched carefully the video-presentation of December 9th on http://www.e-catworld.com
I noticed a very important thing: the Geiger counter did not measure any ionizing radiation beyond the background limit: this means that the Ecat SKLep does not emit noxious radiations.
This is very important.
Best
Myriam
Mats Heijkenskjold:
Normal scaffolds are enough. For more complex assemblings we will give the necessary consultancy to our Clients, depending on the situation.
Warm Regards,
A.R.
Mayr Gunter:
To make orders, please go to http://www.ecatorders.com
We do not make inverters, but we will give you a list of suppliers where you can buy them directly, saving money. We will give this consultancy just before the delivery, depending on the specific situations.
Warm Regards,
A.R.
Regarding the waste heat energy lost to the atmosphere from carbon based and nuclear power stations, I once, about 15 years ago, had worked out the first approximate iteration of what is the temperature rise contribution to the atmosphere of all the energy (not only the waste part due to the 60% inefficiency) in the oil, coal and gas (higher calorific value)and nuclear ending up as a rise in temperature, and found it to be just insignificant, not worth doing an accurate calculation. And that was without any assumed heat pick up by the oceans and leakages to space. Remember that between the Earth’s surface and space there’s a temperature gradient of 285 deg Kelvin.
To the Readers,
Many are asking, some worryingly, about the invertors required for converting the DC output of the Lep. For home use, single phase, 110V 60Hz or 220V 50Hz are readily available from the standard highly reliable online buying websites ( I don’t want to be their advertiser, hence the lack of their names).
A normal home that has a peak power demand of 5 kW, one will need to invest in 50 Leps, at $250 each = $12,500 + shipping costs and VAT or state tax. That’s less than a cost of a new car. I think that it is affordable for many and the payback will be very short, especially when the expected hikes in fuel and electricity rates go through the roof. This has already commenced.
Get your hands on an initial trial pair of Leps and order also another amount for later confirmation when your first two Leps prove their worth. You may connect your lighting circuits to the first 2×100 W Leps and see how it goes. When you become convinced that a 2 Watt input is powering your 200 Watt lighting circuits without trouble for a few weeks, then start begging Rossi to send you the 30, 40 or 50 Leps that you placed as a second order, and run your house for free for 9 years, since the first two years of the expected 11 years life expectancy will be giving you back what you had spent on the Leps. The next 9 years will be free electrical power.
Then there are methods how to store the excess energy that the Leps will be producing during the low demand hours of your home, such as during the night. A high volume water heater can be heated during the night by the use of a timer. Thus reducing the load on the Leps during the day, while having enough power to switch on your heating or cooling and other power guzzlers. (best are heat-pump air conditioners).
I think one can ask Rossi to include a feedback loop to switch off/on some of the Leps according to the load, and in a rotating fashion, so as all the Leps will produce power equally in the long run, if not already included in his offers.
Good evening Dr Rossi, I have been following your research for many years and I find the current developments really exciting and I wish you a rapid achievement of the target of 1000000 SKlep. In a distant post, that I can not find, you recommended several books to deepen scientific topics. Could you remind me these books.
Thank you
I would like to order 5 pieces of e-cat sklep to start with. My question. How much does the inverter cost? I would like to buy it from your company because it is optimally matched to your e-cats! I would also like to have the critical voices in my community, my district, in Austria, in Europe and around the world go out if I bring my electricity bill and heating costs to zero and thus help to save the environment!
Thank you for the information regarding the price of the inverter, I remain
Dear Andra Rossi,
·
I have generally supported ‘Renewable energy systems’, but I extend that to include Ecats/ZPE devices.
In general, I am against using fossil fuel based energy systems and Nuclear Power.
‘Renewable Energy’ systems have a very important charactoristic which is not usually recognised; during operation they take all of the energy that they generate from that already in the biosphere. As such, during operation they do not cause ‘global warming’/climate change, but will be ‘neutral’ in that respect.
That is not true of fossil fuel based energy systems and Nuclear Power; which both add ‘new’ heat energy to what is now an ‘over heating’ biosphere due to our atmospheric average CO2 concentrations exceeding the assessed critical 350 ppm. figure.
Fossil fuel based systems rely on stored Chemical energy, stored underground over millenia. Nuclear Power uses fission energy.
When generating electricity, both fossil fuels and Nuclear Power are very ineficient compared to Renewable energy, adding approximately 2.4 times as much ‘new heat energy’ to the biosphere, than the useful electrical energy generated. Part of that extra heat will be trapped withing the biosphere adding to the global warming effect. (Assuming such power stations run at 40 % efficiency.)
Electricity generation by fossil fuels and nuclear power both usually use water as a cooling agent and will be adding increased water vapour to the atmosphere which is also a ‘greenhouse gas’ in addition to the CO2 from fossil fuels.
Energy from Ecat/ZPE devices will also effectively be adding ‘new’ energy to the Earth’s biosphere.
One potential advantage of Renewable Energy systems, Ecats/ZPE devices, is that they can be ‘more democrastic’, owned by individuals; whereas that is usually not the case with other systems.
Oil Companies and Nuclear Power Companies, realizing the cost advantages of ‘Renewable Energy systems’ and the need to exit from using fossil fuels are now investing in large scale Renewables in order to try to maintain their existing ‘Monopoly or Near Monopoly’ position.
I hope that in the future, Ecats and other ZPE devices will/can be owned and operated by individuals to minimize future monopoly situations.
It appears that Ecats/ ZPE will have the cost advantage over other energy systems, but that they will relatively be in short supply for a long time.
Continued/continuing Climate Change is/remains an existential ‘threat’ to humankind, and is unlikely to go away without extraordinary and unlikely changes.
There is some discussion occuring regarding light energy, which might be evolving in your lab from the SKLED (into SKLEP). Might it be possible that the Ecat SKLep is an advanced closed system surrounding a new type of photovoltaic system, with the light source coming from plasma rather than the sun, that is able to generate significant electricity.
Perhaps “the SKLEP produces long range weak force bosons that where active in the early microseconds of the universe. These photon like weak force bosons will defeat any radioactive source when the reaction is active. By cutting the background radiation level in half, the production of long range weak force activity can be inferred.”
This interpretation and theoritical postulation was published by mr “AXIL AXIL” on E-Cat World today.
I’ll be darned if it doesn’t make at least some sense to me. It also ties the SKLed with its child creation SKLep. I’m convinced your readers will also enjoy this postulation.
You answered “Yes” to my question about a battery storage connection to the Ecat SKLep controller. Thank you.
In a working installation, assuming at least a partially charged battery, could the same storage battery provide the 12v DC voltage to power the Ecat SKLep, enabling a self powered stand-alone off-grid configuration?
@Albert Ellul,
I like your phrase “…Let the E-Cat enter the market slowly and silently, like a cat stalking a mouse…”
I understand, and it’s probably the best choice. Dr. Rossi surely knows what is bubbling on the outside and certainly his choices depend on these factors.
But we all are in a hurry!
Regards,
Italo R.
“…to become better known through a big and important advertising campaign.
They say “Advertising is the soul of commerce”. If you make yourself known more and better you will receive an infinity of new orders, well over a million!”
While Agreeing with you (Italo R.) on the marketing principle and on the urgent need of Rossi’s technology, there’s one truth that needs to be said: The E-Cat, in whatever energy output form is produced; will be the death of many other supplies of energy. This will be a disrupting technology. But pushback on it will be made by the corrupt cabal, primarily the ‘green energy’ cabal who are sucking up billions in subsidies (tax money) to produce forms of energy more expensive for us than coal, oil and gas. That is, we are being forced to pay others so that they will then sell us basic needs at a higher cost than normal. In the old days this was called ‘fraud’, and the police called in. Today it is called saving the planet (by pushing civilisation back into 19th century poverty.
The E-Cat will be under a massive attack by the corrupt cabal to destroy it before it’s born. So, the best thing is exactly how Ing. Rossi is planning the roll out. Quietly and silently. When the roll out starts and the E-Cat SKLep is diffused into homes and commercial places, the world will start recognising its value and importance. ABove all else it will be the energy that replaces, in most cases, the carbon based fuels that up to today have provided humanity with cheap energy that had elevated humanity from a short 45 year average lifespan full of back-breaking work, lack of transport means, diseases, lack of medicine, lack of hospitals, ignorance and general great discomfort and sometimes even death from freezing winter temperatures and summer heatwaves.
Let the E-Cat enter the market slowly and silently, like a cat stalking a mouse. People will then want it, and no corrupt cabal will be able to stop it. It will be the democratisation of energy, the energy version of the home computer, whereby very home will have its own home power station.
Dear Dr. Rossi,
You wrote that the SKLep is not suitable for working in a vacuum. Does this mean for example that it can never be used outside the Earth, in space, on satellites or on the Moon?
Kind Regards,
Italo R.
Dr. Rossi: your reply today to Frank Acland makes me think mass producing skleps will more difficult than you anticipated. Am I right?
Regards, Espen VDP
Steven Nicholes Karels:
No, the issues are temperatures, not altitudes.
Warm Regards,
A.R.
Jiri Veseli:
We never changed priority rules,
Warm Regards,
A.R.
Dear Dr. Rossi,
I have a question about your modified order priority rules.
For example: A company actually in position 155,000 in order list will order 100,000 ECats pieces each month. And it will do so after the sum of all orders exceeds 1 million pieces. Does this mean that customers in the position 500,000 or 700,000 will never receive an ordered ECats or will receive it after 5 years?
I considered your modified priority rules as not fair. I just need to be clear on this.
I wish you much success and millions of delivered ECats
Jiří
Dear Andrea Rossi,
Is there an altitude limitation for the operation of the SKLep? For instance, -1,000 feet to +15,000 feet above MSL?
Frank Acland:
Very !
Warm Regards,
A.R.
Dear Andrea,
Very interesting to learn you are focusing on organizing the manufacturing for your Skleps. How challenging is this task?
Best wishes,
Frank Acland
Andreas:
-20 UP TO +60
Warm Regards,
A.R.
Hi Andrea
Is there is a temperature window in which the Ecat can be operated. Such as -20°C up to 50°C for exmaple?
BR
Andreas
@ Alessandro Coppi:
Imagine, the setup is like You assumed it to be.
Then simply subtract the AI.
Best regards
Ban Đồ Khốn Nạn
Frank Acland:
Manufacturing organization,
Warm Regards,
A.R.
Martin:
Same for us after the Ecat SKLeps will be delivered,
Warm Regards,
Alessandro Coppi:
I prefer not to answer this question,
Warm Regards,
A.R.
Ban-Do Khon-Nan:
No
Warm Regards,
A.R.
Dr. Rossi.
Can You maybe tell us, when official advertisements can be expected, maybe in TV or as billboards ?
Regards
Ban Đồ Khốn Nạn
Hi Andrea,
during the 9 dec event, we can see that when you disconnect the ecat supply the light immediately turns off and the power consumption remains the same as before, this is well explainable consulting the block schematic of the setup: the AI is feeded directly from the energy generated by the ecat.
The one thing that I cannot explain is why when you reconnect the supply to the ecat the light instantly turns on, while the AI should need a while for the bootstrap. May we say that for some instants the ecat works without the support of AI?
best regards
Alessandro Coppi
Dear Dr. Rossi,
for most technical products, manuals with technical drawings, descriptions of the interfaces, etc. or at least data sheets with corresponding drawings are available for download so that potential buyers can get an idea of the usability of the product in advance.
Is there something like that for the ECAT SKLep as well?
Best Regards, Martin
Dear Andrea,
In this period, what are you mostly focusing on in your work?
Best wishes,
Frank Acland
Stephen:
We’ll give the necessary instructions at the delivery of the Ecat SKLeps to our Clients,
Warm Regards,
A.R.
Gerard McEk:
Yes,
Warm Regards,
A.R.
Dear Andrea,
Do you still consider also to generate electricity and sell it in the future?
(Some years ago you intended to sell heat with your previous Ecat products and not sell the units.)
If not, can you tell us what the main reason is for this change of mind?
Thank you, kind regards, Gerard
Dear Andrea
I notice that the image of the device has fewer connectors than the prototype used in the demo.
I think there are two female connectors on one side and I think you mentioned before there are 2 male connectors on the other side which allows them to be connected in series Lego style. Is this correct?
I suppose it’s a simplification as they maybe complex connectors but I suppose one of the pair is used for input and the other for output. Or one of the pairs used for power and the other for control.
In the more complex demo arrangement the out put to the load came directly from the SKLEP.
Is this also the case for the final product or in that case will the power output come via the controller? So basically what ever the assembly we just need to connect to the controller for out put?
Thanks and best Regards
Stephen
Myriam:
We made the measurements with the geiger for more than 10 years in all our experiments and never have detected ionizing radiations emitted by the Ecats.
Warm Regards,
A.R.
Seni Fahisenin-Oglu:
Yes,
Warm Regards,
A.R.
Dr. Rossi,
is it also quite easy for the new ecat models to chain them and scale them up to, let’s say, 100 pieces, in a “container”, which, itself, would be then a bigger generator?
Regards
Seni Fahişenin-Oğlu
Dear Dr Andrea Rossi,
I watched carefully the video-presentation of December 9th on http://www.e-catworld.com
I noticed a very important thing: the Geiger counter did not measure any ionizing radiation beyond the background limit: this means that the Ecat SKLep does not emit noxious radiations.
This is very important.
Best
Myriam
Jeff Smathers:
No.
Warm Regards,
A.R.
Can this SKLep module function in an atmospheric vacuum for a sustained period of time? Thank you.
Mats Heijkenskjold:
Normal scaffolds are enough. For more complex assemblings we will give the necessary consultancy to our Clients, depending on the situation.
Warm Regards,
A.R.
Tom Conover:
Sorry, I am not able to answer.
Warm Regards,
A.R.
Richard Wells:
Thank you for your insight,
Warm Regards,
A.R.
Mayr Gunter:
To make orders, please go to
http://www.ecatorders.com
We do not make inverters, but we will give you a list of suppliers where you can buy them directly, saving money. We will give this consultancy just before the delivery, depending on the specific situations.
Warm Regards,
A.R.
Marco:
There is a complete and rich related bibliography at the end of the paper you can find here:
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Warm Regards,
A.R.
Prof:
Thank you for the update,
Warm Regards,
A.R.
Richard Wells
January 23, 2022 at 2:31 PM
Regarding the waste heat energy lost to the atmosphere from carbon based and nuclear power stations, I once, about 15 years ago, had worked out the first approximate iteration of what is the temperature rise contribution to the atmosphere of all the energy (not only the waste part due to the 60% inefficiency) in the oil, coal and gas (higher calorific value)and nuclear ending up as a rise in temperature, and found it to be just insignificant, not worth doing an accurate calculation. And that was without any assumed heat pick up by the oceans and leakages to space. Remember that between the Earth’s surface and space there’s a temperature gradient of 285 deg Kelvin.
Dear Dr Rossi,
Here are the stats I found today watching
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 97000, of which 89560 of the sole “Ecat SK and long range particle interactions”
Reccomendations: 6676
Citations: 30
Total Research Interest index: 1720
And counting…
Prof
To the Readers,
Many are asking, some worryingly, about the invertors required for converting the DC output of the Lep. For home use, single phase, 110V 60Hz or 220V 50Hz are readily available from the standard highly reliable online buying websites ( I don’t want to be their advertiser, hence the lack of their names).
A normal home that has a peak power demand of 5 kW, one will need to invest in 50 Leps, at $250 each = $12,500 + shipping costs and VAT or state tax. That’s less than a cost of a new car. I think that it is affordable for many and the payback will be very short, especially when the expected hikes in fuel and electricity rates go through the roof. This has already commenced.
Get your hands on an initial trial pair of Leps and order also another amount for later confirmation when your first two Leps prove their worth. You may connect your lighting circuits to the first 2×100 W Leps and see how it goes. When you become convinced that a 2 Watt input is powering your 200 Watt lighting circuits without trouble for a few weeks, then start begging Rossi to send you the 30, 40 or 50 Leps that you placed as a second order, and run your house for free for 9 years, since the first two years of the expected 11 years life expectancy will be giving you back what you had spent on the Leps. The next 9 years will be free electrical power.
Then there are methods how to store the excess energy that the Leps will be producing during the low demand hours of your home, such as during the night. A high volume water heater can be heated during the night by the use of a timer. Thus reducing the load on the Leps during the day, while having enough power to switch on your heating or cooling and other power guzzlers. (best are heat-pump air conditioners).
I think one can ask Rossi to include a feedback loop to switch off/on some of the Leps according to the load, and in a rotating fashion, so as all the Leps will produce power equally in the long run, if not already included in his offers.
Good evening Dr Rossi, I have been following your research for many years and I find the current developments really exciting and I wish you a rapid achievement of the target of 1000000 SKlep. In a distant post, that I can not find, you recommended several books to deepen scientific topics. Could you remind me these books.
Thank you
Good evening, dear Dr. Rossi!
I would like to order 5 pieces of e-cat sklep to start with. My question. How much does the inverter cost? I would like to buy it from your company because it is optimally matched to your e-cats! I would also like to have the critical voices in my community, my district, in Austria, in Europe and around the world go out if I bring my electricity bill and heating costs to zero and thus help to save the environment!
Thank you for the information regarding the price of the inverter, I remain
Sincerely
Mayr Gunter
Dear Andra Rossi,
·
I have generally supported ‘Renewable energy systems’, but I extend that to include Ecats/ZPE devices.
In general, I am against using fossil fuel based energy systems and Nuclear Power.
‘Renewable Energy’ systems have a very important charactoristic which is not usually recognised; during operation they take all of the energy that they generate from that already in the biosphere. As such, during operation they do not cause ‘global warming’/climate change, but will be ‘neutral’ in that respect.
That is not true of fossil fuel based energy systems and Nuclear Power; which both add ‘new’ heat energy to what is now an ‘over heating’ biosphere due to our atmospheric average CO2 concentrations exceeding the assessed critical 350 ppm. figure.
Fossil fuel based systems rely on stored Chemical energy, stored underground over millenia. Nuclear Power uses fission energy.
When generating electricity, both fossil fuels and Nuclear Power are very ineficient compared to Renewable energy, adding approximately 2.4 times as much ‘new heat energy’ to the biosphere, than the useful electrical energy generated. Part of that extra heat will be trapped withing the biosphere adding to the global warming effect. (Assuming such power stations run at 40 % efficiency.)
Electricity generation by fossil fuels and nuclear power both usually use water as a cooling agent and will be adding increased water vapour to the atmosphere which is also a ‘greenhouse gas’ in addition to the CO2 from fossil fuels.
Energy from Ecat/ZPE devices will also effectively be adding ‘new’ energy to the Earth’s biosphere.
One potential advantage of Renewable Energy systems, Ecats/ZPE devices, is that they can be ‘more democrastic’, owned by individuals; whereas that is usually not the case with other systems.
Oil Companies and Nuclear Power Companies, realizing the cost advantages of ‘Renewable Energy systems’ and the need to exit from using fossil fuels are now investing in large scale Renewables in order to try to maintain their existing ‘Monopoly or Near Monopoly’ position.
I hope that in the future, Ecats and other ZPE devices will/can be owned and operated by individuals to minimize future monopoly situations.
It appears that Ecats/ ZPE will have the cost advantage over other energy systems, but that they will relatively be in short supply for a long time.
Continued/continuing Climate Change is/remains an existential ‘threat’ to humankind, and is unlikely to go away without extraordinary and unlikely changes.
Best regards, Richard Wells.
Dear Andrea,
There is some discussion occuring regarding light energy, which might be evolving in your lab from the SKLED (into SKLEP). Might it be possible that the Ecat SKLep is an advanced closed system surrounding a new type of photovoltaic system, with the light source coming from plasma rather than the sun, that is able to generate significant electricity.
Perhaps “the SKLEP produces long range weak force bosons that where active in the early microseconds of the universe. These photon like weak force bosons will defeat any radioactive source when the reaction is active. By cutting the background radiation level in half, the production of long range weak force activity can be inferred.”
This interpretation and theoritical postulation was published by mr “AXIL AXIL” on E-Cat World today.
I’ll be darned if it doesn’t make at least some sense to me. It also ties the SKLed with its child creation SKLep. I’m convinced your readers will also enjoy this postulation.
Warm Regards,
Tom
Dear Andrea Rossi,
Are there any mechanical fastener like threads or other means to support the SKLep?
Regards,
Mats Heijkenskjold
Martyn Aubrey:
It depends on the situation. We’ll give specific instructions at the delivery,
Warm Regards,
A.R.
Dear Dr Rossi,
You answered “Yes” to my question about a battery storage connection to the Ecat SKLep controller. Thank you.
In a working installation, assuming at least a partially charged battery, could the same storage battery provide the 12v DC voltage to power the Ecat SKLep, enabling a self powered stand-alone off-grid configuration?
Many Thanks, if you can answer.
Independent Regards,
Martyn Aubrey
@Albert Ellul,
I like your phrase “…Let the E-Cat enter the market slowly and silently, like a cat stalking a mouse…”
I understand, and it’s probably the best choice. Dr. Rossi surely knows what is bubbling on the outside and certainly his choices depend on these factors.
But we all are in a hurry!
Regards,
Italo R.
@Italo R.,
“…to become better known through a big and important advertising campaign.
They say “Advertising is the soul of commerce”. If you make yourself known more and better you will receive an infinity of new orders, well over a million!”
While Agreeing with you (Italo R.) on the marketing principle and on the urgent need of Rossi’s technology, there’s one truth that needs to be said: The E-Cat, in whatever energy output form is produced; will be the death of many other supplies of energy. This will be a disrupting technology. But pushback on it will be made by the corrupt cabal, primarily the ‘green energy’ cabal who are sucking up billions in subsidies (tax money) to produce forms of energy more expensive for us than coal, oil and gas. That is, we are being forced to pay others so that they will then sell us basic needs at a higher cost than normal. In the old days this was called ‘fraud’, and the police called in. Today it is called saving the planet (by pushing civilisation back into 19th century poverty.
The E-Cat will be under a massive attack by the corrupt cabal to destroy it before it’s born. So, the best thing is exactly how Ing. Rossi is planning the roll out. Quietly and silently. When the roll out starts and the E-Cat SKLep is diffused into homes and commercial places, the world will start recognising its value and importance. ABove all else it will be the energy that replaces, in most cases, the carbon based fuels that up to today have provided humanity with cheap energy that had elevated humanity from a short 45 year average lifespan full of back-breaking work, lack of transport means, diseases, lack of medicine, lack of hospitals, ignorance and general great discomfort and sometimes even death from freezing winter temperatures and summer heatwaves.
Let the E-Cat enter the market slowly and silently, like a cat stalking a mouse. People will then want it, and no corrupt cabal will be able to stop it. It will be the democratisation of energy, the energy version of the home computer, whereby very home will have its own home power station.
Italo R.:
Thank you for your suggestion. Our strategy is different.
Warm Regards,
A.R.
Simon:
Delivered together with the priority of the first order,
Warm Regards,
A.R.
CC:
USA, Europe, Russia
Warm Regards,
A.R.