Dear Mr. Rossi,
can i pre-order 10 ecat sklep (1 KW) already installed in a portable box with AC 230V in- and output How much does it cost incl the proper box?
Best regards
M.Münch
Daniel G. Zavela:
Thank you for your attention to the work of our Team.
Answers:
1- Agreed
2- We wanted to make the most simple system, with less possible cables displayed in a perfectly translucent plexiglas island, 100% visible and simple to see and understand.
3- we published the starting day and time and the streaming is visible 24/7 in the whole world. So it runs from the date we published and everybody can
see that it is on anytime he watches
4- yes
5- it turns on in 1 second
Warm Regards,
A.R.
1- A product demo with the E-Cat SKLep Mini powering a lamp is just what the public needs.
2- I wondered why a power supply was used instead of plugging the E-Cat directly into the wall socket and measuring the input (power used using for example a P3 International P4460 Kill A Watt EZ Electricity Usage Monitor) and output (from the E-Cat) with a voltmeter?
3- The clock display does not show elapsed time; so it is difficult to know how long the E-Cat has run.
4- In the event of the mains power going down is there a backup generator connected to the wall socket to provide continuous power to the E-Cat?
5- If the mains power goes down, what is the restart sequence?
Dear Dr. Rossi,
I thought it would not be possible to run a 55 Watt lamp with the mini ecat skl which just produce 10 Watt and therefore would switch off. But if this is possible so i can connect an ohmic electric heating with 700 Watt to e.g. 5 ecat skl (500 Watt). Is this correct?
Best regards
M.Reinhold
Massimo:
It depends on what you mean with normal domestic necessity: how many kW of power do you have necessity of for the services you want to make the switch of ?
Warm Regards,
A.R.
Salve Dott. Rossi, ho conosciuto la sua vicenda e le sue invenzioni tanti anni fa.
Premetto che sono l’antitesi della competenza in materia, per un utilizzo residenziale medio quanti moduli si devono comprare?
Sono già disponibili?
Grazie mille
English synopsis:
How many units have I to pre-order for a normal domestic necessity ?
Andrea,
Just one spec, if possible. I’m a bit confused. The Cobo halogen BULB in the lamp connected to the MiniSKLep is a H4 55 W bulb, right?
So are you running the lamp using 10 W of current, which would account for the fact that it’s not as bright as it would be if used, for instance, in a car?
Is this correct?
Best of luck with the demo
Italo R.:
Thank you and thanks to all the Readers that are expressing support for this job.
The Mini SKLep is the basic component of any superior power.
Its live volume (the volume necessary to work) is 50 cubic centimeters, which means 5 cubic centimeters per W, which means 5 liters per kW, which means 5 cubic meters per MW. Which is pretty good. For us it is indifferent if the orders are in SKLep or in Mini-SKLep, what we manufacture are the Mini-SKLeps, eventually assembled to make 100 W, 1000 W, etc assemblies. This allows us a good economy scale. In fact 1 SKLep costs exactly 10 times a Mini SKLep. We just decided to sell also the single cells. As I said, 10 Mini SKLeps will account for 1 SKLep in relation to the target of one million units ordered: for us it is indifferent if we sell 1 million SKLeps, or, for example, 500000 SKLeps and 5 millions Mini-SKLeps: the sum of the worth is the same.
Warm Regards,
A.R.
Dear Dr. Rossi,
Congratulations on the streaming video for the mini Ecat!
It is a very clear, clean and simple setup and clearly shows that the ect works while consuming practically nothing. Great!
My next consideration is this: why not do a similar proof for the Ecat-SKL-ep as well?
The effect would be disruptive and would instantly boost the number of orders. Are you interested in speeding up the number of orders? Obviously this is the case, so why not do this proof? Thanks for an answer.
My best regards,
Italo R.
Dr Rossi:
Congratulations for the (expected) 100000 hours endurance test of the Mini SKLep I found here: https://youtu.be/B0JBPXcTN8M
Fantastic.
I liked also very much the backstage I watched clicking the “more” link under the video.
The electricity consumed is 0.0002 W, calculating 10 V x 0.000 A that becomes 0.001 A for about half second every 3 seconds.
Now I make this consideration: assuming that the electricity generated by the Ecat is 5 W, the COP is:
5/0.0002, which means that the COP is 25000 !!!
Am I correct ?
God bless you and your team,
CC
Dr. Rossi,
With respect to your new livestream of the MiniSKLep — Nice! Very, very nice! I’m excited to finally see it in action, so unlimited congratulations to you and your team!!
Question:
1) I had a hard time on finding the specs for the light (COBO Spa 05.685-12V). I think I found it on a German site– Halogen headlight, 12v 55watt. Is that correct?
2) Can I assume that if the MiniSKLep is being driven at 10v then its output voltage is also 10v?
Thanks, Congratulations on a fantastic demo!
WaltC
Frank Acland:
I thought I had already explained the issue, but I have to thank the Ecat World Reader for making me understand I had not been sufficiently clear.
So, let me synthetically rephrase.
The Input for the SKLep must be from the grid, caused from the necessity of a grounded power source.The exact voltage depends on the regular voltage of the grid. The output can be either DC or AC, depending of the specific situations; also from the specific situations depends the output Voltage.
Warm Regards,
A.R.
Gavino Mamia:
The top line indicates Volts, as correctly written in the video. We have 10 V, 0.000 A and 0.0 W
As you can see, now and again the Amperes have a peak of 1 mA ( 0.001 mW ) This peak lasts about 1/10 of second every 3 seconds.
Initially are possible technical problems of the direct streaming, it is possible the now and again the broadcasting falls down, anyway it will go no for 100000 hours, so some pationce for the first day should be be not a big issue…
Warm Regards,
A.R.
I am not sure if you have tried this yet. I think it is an idea that may have some merit.
Attach a small ceramic magnet (or any magnet) to the ground of the ecat. You are not inducing a current but setting up a Bias, like a transistor drain. This should create a fake leakage current and appear as if you were connected to stable power and allow the ecat to continue to process even after disconnecting from the mains.
Very small time consumption to test this.
Thank you!
If you want to invent a free energy device that can be connected to a battery instead of wall socket. You should read what Norman Wootan writes about positive and negativ ions at:
I received the following suggestion from a reader of E-cat World today, I wonder if you could comment.
“The best thing AR could do right now is very clearly and in an open fashion, describe EXACTLY what the input power requirements are for the SKLep. It’s fine if the SKLep itself must remain a black box, but the input requirements cannot be left up in the air if he expects to sell a lot of ECATs.”
“So, it can’t be “this will work, this won’t.” it needs to be “these are the requirements; if met, the ECAT will work,” and “grid” is not a precise enough requirement. He needs to specify the input voltage and current requirements, and perhaps power frequency (if AC or some particular waveform is needed) and grounding requirements. No magic.”
Dear Dr. Rossi,
I just read old questions and your answers. There is one VERY interesting question which you not really answered definitely:
2022-09-17 15:00 Urs
Dear Dr. Rossi,
as a complement zu Mr. Milan’s question of “..in a way that if all devices need less than 1kW I don’t pull power from the grid and if my devices need more than 1kW the DIFFERENCE is pulled from the grid?”
You answered it should be possible etc
1) —-> Do you think it would be possible to do this without a battery? <—-{THIS QUESTION}
That would be awesome!It would mean that i can spend the 5000 Euro instead for a battery for ecats.
You have stated that the SKLep has received CE certification.
1: Would CB certification also be worthwhile for the input and output AC circuits?
2: Can the SKLep provide both active and reactive power to electrical motors?
3: Can the AC/AC SKLep synchronise to a live 2-phase AC system when switched on?
Dear Dr. Rossi,
In the last 18 months, the wholesale price of electricity, expressed in euros per MWh, went up from 57 to 543 in Italy and from 49 to 469 in Germany. Has that created an opportunity for you to sell 1 MW plants?
Best regards,
D.
Many people want to connect the SKLep directly to a battery. Others want to operate devices directly with the SKLep.
A charger can also be a power supply unit, but a power supply unit is a bad charger. There is a risk of destroying the battery.
Does the SKLep function as a power supply unit or as a charger? So does the SKLep react differently to a fully charged battery or does it consistently do full work with constant current or constant voltage?
Corriandolo:
If the Ecat is not delivered to somebody for any reason and if somebody cancels the pre-order before the delivery for any reason, nobody owes money to anybody, for any reason,
Warm Regards,
Dr Andrea Rossi, CEO
Leonardo Corporation
Claudio R.:
1- we cannot help you with the bureaucracy issues: obviously you must respect the local laws and you did well asking help from a certified contractor
2- you can change your pre-order whenever uou want, conserving the priority you already got
3- to update your pre-order you must make a new one in substitution, filling a new form here: http://www.ecat.com
Write in the form that your former pre-order dated… must be cancelled.
Warm Regards,
A.R.
Dear Mr. Rossi Today I asked a technician if I could use 20 ecat 100w devices (when of course they would be available) to run the engine of a cold store.
He reprimanded me by telling me that in any case I would have to make a request to an institution in my country for the installation if the power exceeds 750 w so I assume beyond the wait we will also have to climb the hill of bureaucracy. Apart from waiting and bureaucracy, having booked 2 skleps in December with 12v output, could I change the order to 2 with 220v output without losing priority?
And if I can, what steps should I take? thanks Sincerely Claudio R.
Dr Rossi,
Assume that you will not deliver the Ecat to some person that made a pre-order, whatever the reason, or that a person who made a pre-order will cancel it, whatever the reason: will these persons have to pay anything, whatever the reason ?
Best,
Corriandolo
Anthony:
Thank you for your attention to the work of our Team,
Warm Regards,
A.R.
Dear Mr. Rossi,
can i pre-order 10 ecat sklep (1 KW) already installed in a portable box with AC 230V in- and output How much does it cost incl the proper box?
Best regards
M.Münch
M.Reinhold:
Yes, but obviously the generated Wh/h will be proportionally less.
Warm Regards,
A.R.
COP 25000 !!!!
It’s a miracle.
Thank you, Dr Rossi, mafnificent video
Cheers,
Anthony
Bob Belovich:
We have to install a back up,
Warm Regards,
A.R.
Diego T.:
Actually, 1 cubic meter contains 1 mllion of cubic centimeters ( 1 m^3 = 10^6 cm^3 )
Warm Regards,
A.R.
Daniel G. Zavela:
Thank you for your attention to the work of our Team.
Answers:
1- Agreed
2- We wanted to make the most simple system, with less possible cables displayed in a perfectly translucent plexiglas island, 100% visible and simple to see and understand.
3- we published the starting day and time and the streaming is visible 24/7 in the whole world. So it runs from the date we published and everybody can
see that it is on anytime he watches
4- yes
5- it turns on in 1 second
Warm Regards,
A.R.
Dear Dr. Rossi,
1- A product demo with the E-Cat SKLep Mini powering a lamp is just what the public needs.
2- I wondered why a power supply was used instead of plugging the E-Cat directly into the wall socket and measuring the input (power used using for example a P3 International P4460 Kill A Watt EZ Electricity Usage Monitor) and output (from the E-Cat) with a voltmeter?
3- The clock display does not show elapsed time; so it is difficult to know how long the E-Cat has run.
4- In the event of the mains power going down is there a backup generator connected to the wall socket to provide continuous power to the E-Cat?
5- If the mains power goes down, what is the restart sequence?
Wishing you great marketing success.
Best Regards,
Daniel G. Zavela
sorry
I was thinking a 50 cubic as 1/8 of a cubic meter
sorry again
diego
sorry dr Rossi
but if 50cm cubic are 10 W it’ s impossible 5 litres are 1 Kw
diego
Dear Andrea
What happens to an ecat sklep when the grid to which it is connected goes down, like the situation in parts of Florida this week?
Thanks
Bob Belovich
Dear Dr. Rossi,
I thought it would not be possible to run a 55 Watt lamp with the mini ecat skl which just produce 10 Watt and therefore would switch off. But if this is possible so i can connect an ohmic electric heating with 700 Watt to e.g. 5 ecat skl (500 Watt). Is this correct?
Best regards
M.Reinhold
Massimo:
It depends on what you mean with normal domestic necessity: how many kW of power do you have necessity of for the services you want to make the switch of ?
Warm Regards,
A.R.
Salve Dott. Rossi, ho conosciuto la sua vicenda e le sue invenzioni tanti anni fa.
Premetto che sono l’antitesi della competenza in materia, per un utilizzo residenziale medio quanti moduli si devono comprare?
Sono già disponibili?
Grazie mille
English synopsis:
How many units have I to pre-order for a normal domestic necessity ?
Hugh Maguire
Correct.
Warm Regards,
A.R.
Andrea,
Just one spec, if possible. I’m a bit confused. The Cobo halogen BULB in the lamp connected to the MiniSKLep is a H4 55 W bulb, right?
So are you running the lamp using 10 W of current, which would account for the fact that it’s not as bright as it would be if used, for instance, in a car?
Is this correct?
Best of luck with the demo
Italo R.:
Thank you and thanks to all the Readers that are expressing support for this job.
The Mini SKLep is the basic component of any superior power.
Its live volume (the volume necessary to work) is 50 cubic centimeters, which means 5 cubic centimeters per W, which means 5 liters per kW, which means 5 cubic meters per MW. Which is pretty good. For us it is indifferent if the orders are in SKLep or in Mini-SKLep, what we manufacture are the Mini-SKLeps, eventually assembled to make 100 W, 1000 W, etc assemblies. This allows us a good economy scale. In fact 1 SKLep costs exactly 10 times a Mini SKLep. We just decided to sell also the single cells. As I said, 10 Mini SKLeps will account for 1 SKLep in relation to the target of one million units ordered: for us it is indifferent if we sell 1 million SKLeps, or, for example, 500000 SKLeps and 5 millions Mini-SKLeps: the sum of the worth is the same.
Warm Regards,
A.R.
CC et All Readers:
Yes, your numbers are correct.
This answers also to the other readers that asked the power of the lamp.
Warm Regards,
A.R.
Dear Dr. Rossi,
Congratulations on the streaming video for the mini Ecat!
It is a very clear, clean and simple setup and clearly shows that the ect works while consuming practically nothing. Great!
My next consideration is this: why not do a similar proof for the Ecat-SKL-ep as well?
The effect would be disruptive and would instantly boost the number of orders. Are you interested in speeding up the number of orders? Obviously this is the case, so why not do this proof? Thanks for an answer.
My best regards,
Italo R.
Dear Andrea,
I watched the streaming: excellent, excellent, excellent.
All the best
George
Dr Rossi:
Congratulations for the (expected) 100000 hours endurance test of the Mini SKLep I found here:
https://youtu.be/B0JBPXcTN8M
Fantastic.
I liked also very much the backstage I watched clicking the “more” link under the video.
The electricity consumed is 0.0002 W, calculating 10 V x 0.000 A that becomes 0.001 A for about half second every 3 seconds.
Now I make this consideration: assuming that the electricity generated by the Ecat is 5 W, the COP is:
5/0.0002, which means that the COP is 25000 !!!
Am I correct ?
God bless you and your team,
CC
Dr. Rossi,
With respect to your new livestream of the MiniSKLep — Nice! Very, very nice! I’m excited to finally see it in action, so unlimited congratulations to you and your team!!
Question:
1) I had a hard time on finding the specs for the light (COBO Spa 05.685-12V). I think I found it on a German site– Halogen headlight, 12v 55watt. Is that correct?
2) Can I assume that if the MiniSKLep is being driven at 10v then its output voltage is also 10v?
Thanks, Congratulations on a fantastic demo!
WaltC
Dear Dr. Rossi
I’m very happy for the streaming of MiniSKLep 🙂
what is the power of the led lamp inside of the headlight?
how many W?
Best Regards
Maico
Dr Andrea Rossi,
Congratulations for the video of the Ecat Mini-SKLep. Impressive.
Cheers
Jole
Dear Readers,
If you go to
https://youtu.be/B0JBPXcTN8M
will find a video of the Ecat SKLep that is fantastic
Frank Acland:
I thought I had already explained the issue, but I have to thank the Ecat World Reader for making me understand I had not been sufficiently clear.
So, let me synthetically rephrase.
The Input for the SKLep must be from the grid, caused from the necessity of a grounded power source.The exact voltage depends on the regular voltage of the grid. The output can be either DC or AC, depending of the specific situations; also from the specific situations depends the output Voltage.
Warm Regards,
A.R.
H. Shilling:
Sorry, I am not sure I understood exactly your question: can you rephrase ?
Warm Regards,
A.R.
Roberto:
Thank you for your support,
Warm Regards,
A.R.
Hermes Atar Trismegistus:
Thank you for the link,
Warm Regards,
A.R.
Silent Majority Guy:
Thank you for your support,
Warm Regards,
A.R.
RobertM:
Thank you for the suggestion,
Warm Regards,
A.R.
Gavino Mamia:
The top line indicates Volts, as correctly written in the video. We have 10 V, 0.000 A and 0.0 W
As you can see, now and again the Amperes have a peak of 1 mA ( 0.001 mW ) This peak lasts about 1/10 of second every 3 seconds.
Initially are possible technical problems of the direct streaming, it is possible the now and again the broadcasting falls down, anyway it will go no for 100000 hours, so some pationce for the first day should be be not a big issue…
Warm Regards,
A.R.
finally a streaming video as we have asked you in many
https://www.youtube.com/watch?v=PETFx45WN3Q
this link doesn’t work though
https://www.youtube.com/watch?v=IVire72GFOU&t=0s
Top Line aren’t Watts?
you wrote volt
I am not sure if you have tried this yet. I think it is an idea that may have some merit.
Attach a small ceramic magnet (or any magnet) to the ground of the ecat. You are not inducing a current but setting up a Bias, like a transistor drain. This should create a fake leakage current and appear as if you were connected to stable power and allow the ecat to continue to process even after disconnecting from the mains.
Very small time consumption to test this.
Thank you!
Dr Rossi:
Great video: will it go on for 100000hours without pauses ?
Great !
SMG
Dear Andrea,
If you want to invent a free energy device that can be connected to a battery instead of wall socket. You should read what Norman Wootan writes about positive and negativ ions at:
http://gratisenergi.se/emp.htm
Best Wishes, Hermes
Dear Dr Andrea Rossi:
The video of the Ecat Mini SKLep is stunning !!!
Congratulations,
Roberto
Dear Andrea,
I received the following suggestion from a reader of E-cat World today, I wonder if you could comment.
“The best thing AR could do right now is very clearly and in an open fashion, describe EXACTLY what the input power requirements are for the SKLep. It’s fine if the SKLep itself must remain a black box, but the input requirements cannot be left up in the air if he expects to sell a lot of ECATs.”
“So, it can’t be “this will work, this won’t.” it needs to be “these are the requirements; if met, the ECAT will work,” and “grid” is not a precise enough requirement. He needs to specify the input voltage and current requirements, and perhaps power frequency (if AC or some particular waveform is needed) and grounding requirements. No magic.”
Thank you,
Frank Acland
Dear Dr. Rossi,
I just read old questions and your answers. There is one VERY interesting question which you not really answered definitely:
2022-09-17 15:00 Urs
Dear Dr. Rossi,
as a complement zu Mr. Milan’s question of “..in a way that if all devices need less than 1kW I don’t pull power from the grid and if my devices need more than 1kW the DIFFERENCE is pulled from the grid?”
You answered it should be possible etc
1) —-> Do you think it would be possible to do this without a battery? <—-{THIS QUESTION}
That would be awesome!It would mean that i can spend the 5000 Euro instead for a battery for ecats.
Best regards
H.Schilling
RL
The Ecat can act like a charger
Warm Regards
A.R.
Darko:
Yes
Warm Regards
A.R.
Dear Andrea Rossi,
You have stated that the SKLep has received CE certification.
1: Would CB certification also be worthwhile for the input and output AC circuits?
2: Can the SKLep provide both active and reactive power to electrical motors?
3: Can the AC/AC SKLep synchronise to a live 2-phase AC system when switched on?
https://certification-experts.com/a-complete-guide-to-ce-marking-and-cb-certification-of-electrical-equipment/
https://www.bsigroup.com/en-GB/our-services/product-certification/product-certification-schemes/cb-certification/
Regards,
Paul Dodgshun
Dear Dr. Rossi,
In the last 18 months, the wholesale price of electricity, expressed in euros per MWh, went up from 57 to 543 in Italy and from 49 to 469 in Germany. Has that created an opportunity for you to sell 1 MW plants?
Best regards,
D.
Good day Mr Rossi,
Many people want to connect the SKLep directly to a battery. Others want to operate devices directly with the SKLep.
A charger can also be a power supply unit, but a power supply unit is a bad charger. There is a risk of destroying the battery.
Does the SKLep function as a power supply unit or as a charger? So does the SKLep react differently to a fully charged battery or does it consistently do full work with constant current or constant voltage?
Many thanks
RL
Dr Rossi,
If Plan B is to be an online running demonstration than what is the point of holding off from doing that?
Best Regards,
Jeff
Corriandolo:
If the Ecat is not delivered to somebody for any reason and if somebody cancels the pre-order before the delivery for any reason, nobody owes money to anybody, for any reason,
Warm Regards,
Dr Andrea Rossi, CEO
Leonardo Corporation
Claudio R.:
1- we cannot help you with the bureaucracy issues: obviously you must respect the local laws and you did well asking help from a certified contractor
2- you can change your pre-order whenever uou want, conserving the priority you already got
3- to update your pre-order you must make a new one in substitution, filling a new form here:
http://www.ecat.com
Write in the form that your former pre-order dated… must be cancelled.
Warm Regards,
A.R.
Dear Mr. Rossi Today I asked a technician if I could use 20 ecat 100w devices (when of course they would be available) to run the engine of a cold store.
He reprimanded me by telling me that in any case I would have to make a request to an institution in my country for the installation if the power exceeds 750 w so I assume beyond the wait we will also have to climb the hill of bureaucracy. Apart from waiting and bureaucracy, having booked 2 skleps in December with 12v output, could I change the order to 2 with 220v output without losing priority?
And if I can, what steps should I take? thanks Sincerely Claudio R.
Dr Rossi,
Assume that you will not deliver the Ecat to some person that made a pre-order, whatever the reason, or that a person who made a pre-order will cancel it, whatever the reason: will these persons have to pay anything, whatever the reason ?
Best,
Corriandolo
Steven Nicholes Karels:
Thank you for your indight,
Warm Regards,
A.R.