Italo R.:
This answer is very superficial. Obviously the AI can be useful in other fields, where algorythms can be grounded upon mathematical, physical and chemical certified data. This answer seems to be suggested more from a cheap researcher or from his parrot than by an AI system, though.
Warm Regards,
A.R.
Dear Dr. Rossi
Can the ecat ssm also be used to deliver electricity into the grid (f.e. ecat ssm produces 5kw, house consumes 2kw, rest of 3kw goes to the grid?)
Thanks.
Kind regards,
Guido
As all we know, ChatGPT is the astoundingly new Artificial Intelligence with whom everyone can chat freely asking anything,
I have asked to the AI ChatGPT the same question:
“Can you express in few words if you think there is scientific evidence of the Creation ?”
Here is the reply:
There is no scientific evidence that supports the idea of creation as described in some religions. Science is based on the collection of observable and verifiable data through experimental methods and the use of scientific theories to explain this data. Creation, as described in some religions, is not observable or verifiable through scientific methods and therefore cannot be studied scientifically. In addition, scientific theories that explain the origin of the universe and life on Earth are supported by a large amount of data and have undergone rigorous testing through scientific methods.
Dear Andrea,
About the roots of Christmas: can you express in few words if you think there is scientific evidence of the Creation ?
Happy New Year to you and all the JoNP’s readers
Lucy
Ron Stringer, Maico, Patrick et Al:
Now I have understood what you say; after reading your comments I talked with the guy who today was in the laboratory from 11 a.m. through 1 p.m. Rome time and checked if everything was all set. He switched on the light of the room wherein is the setup of the live streaming, checked everything, and eventually he switched off the room ‘s light; he also closed the curtain of the window, to measure in the full dark the Luxes with the luxometer, eventually he raised again the curtain; all these operations, that are performed now and again, did not affect the operation of the Ecat SKLep, that continued to work regularly. We make this control every day, sometimes ( not today ) also connecting in series the PeakTech multimeter to measure the microA.
Conclusion: the Ecat continued to work as always, while our operator was making a series of controls in the room.
Warm Regards,
A.R.
Just out of curiosity, I reviewed that time on the livestream. At 12:29, just before the clock changes to 12:30, there is a flash of light, and the headlight turns off. Just about a minute later, there is a very brief period of darkness, and the headlight turns back on. There is no apparent change to the power supply, which shows the same numbers, with its green light on.
During the period when the headlight is off, one can see a new source of illumination reflected in the headlight reflector, on the left side, and some appearance of motion on the right hand side of the reflector.
Perhaps you need some security cameras in the room?
Ron Stringer
Looking at the shadow reflected on the lamp, one can clearly see that at 12:30 Rome time someone turned off the light in the room (end of Andrea’s working day on Christmas day? 🙂 ) and the video cameras that were filming the live streaming they had to readjust to the decrease in light in the room 😉
Patrick:
We didn’t see that event. It appears all right to us. Maybe a momentaneous blackout, but we didn’t see it and we didn’t make any action to repair.
Warm Regards,
A.R.
Dear Andrea, Merry Christmas to you and all your readers,
I would like to suggest you for the next live stream to also show the passing of the seconds, this makes the idea of ​​the passing of time much better.
Regards, Giuseppe
Merci Brookeeper, c’est tout à fait ce que je pense du projet “ITER”.
Une question: la bouteille bleue devant: C’est de l’oxygène pour le pilote quand il manoeuvre pour se garer dans un parking souterrain??
Bonnes fêtes depuis France et pas loin d’Iter!
CC:
Of course yes: the published photo is static and we just wanted to make of it a wishes card.
The live streaming, obviously, will be made with the same structure now in live streaming with the Ecat gridbound, with a front view that shows also the bottom, being the Ecat seat upon a translucent plexiglas table, and a top view that shows the other three sides and the top.
Warm Regards,
A.R.
Dear Andrea!
Now can not the E-cat be much better.
The purpose with E-cat is reached.
Have the 1 million-target been achieved yet, so you can start the manufacturing?
I wish you a Happy Healthy New Year.
Best regards
Nils Fryklund
Dr Rossi,
When the Ecat SK SSM will be live streamed, will be put two cameras, to show all the 4 sides of the lamp, as it is in the streaming we can see now in the live streaming of the Ecat SKLep with the ground connection ? In the photo with the mini Christmas tree we can see only the front, but we cannot see the back and the sides fron a top view.
Best regards,
CC
Dear Andrea,
Today, on Christmas day, at 12:30 Rome time, something happened to the ecat. I was watching live. There was a very bright flash, and then the ecat turned off. And then the room went dark, and then it turned on again. What happened? I have a screenshot. Or you can rewind the video to see.
Merry Christmas
Patrick
Is the ideal shape of your zero energy collector a circle because of the effect has a radial efficiency around some center point? Consequently, a circle is an ideal shape and not too large for best collection. Therefore, an ensemble of small collectors makes more sense than a single, larger collector. Thoughts?
Hello to you dr. Rossi and the hard-working team.
Because with all the good wishes to you there is a lot of work involved.
Stay healthy and “well tempered” 🙂
Heinz Sause
Caro Andrea,
ogni complimento al tuo lavoro è inadeguato.
Grazie per quanto fai per l’Umanità tutta.
Buon Natale a Te alla tua famiglia al tuo Team.
Ti abbraccio
Gian
Hello Doctor Rossi
Merry Christmas to you, your family and your team.
My thoughts go to the homeless who will face the cold of these days trying to survive.
May tomorrow an Ecat SSM warm their lives and hearts, I trust in you and the charities.
Congratulations again
Re packing density, rectangular vs circular, perhaps I was not clear enough.
If you pack circular disks in a plane, there will be spaces between disks. If you pack rectangular packages, there will be very little space between units. Packing density is higher for rectangles compared to circular disks of same area, so total space for the same number of single units is lower.
“How about using the no-grid mini-ECAT to power an indoor drone? (Maybe more than one mini-ECAT would be needed?) Set it to hover 1 foot off a table and live stream that. That will attract viewers.”
This is a great idea IMO…flashy display and obviously no external power supply (except I am sure someone will say it is powered by microwaves or a laser). Please consider this for your SSM version stream. Maybe a drone that has “running lights” as well. Probably won’t run as long as a LED lamp though before something wears out…mechanical systems are usually not a reliably of electronics only systems.
Would need a drone that has a hover mode or else you would have to tether it to a table with strings.
1) Circular PWB populated boards are inherently more expensive than rectangular because of the wasted space/materials….so is your PWB round or rectangular (assuming you have one inside the ECATs)
2) Assuming the same area (circle area vs rectangular area), packing density of arrays of ECAT is higher with rectangular shape……So is there a reason you have chosen to go with circular/disk form factor?
Italo R.:
This answer is very superficial. Obviously the AI can be useful in other fields, where algorythms can be grounded upon mathematical, physical and chemical certified data. This answer seems to be suggested more from a cheap researcher or from his parrot than by an AI system, though.
Warm Regards,
A.R.
Guido:
Should be, but to enter the grid is necessary the authorization and the technology demanded by the provider,
Warm Regards,
A.R.
Dear Dr. Rossi
Can the ecat ssm also be used to deliver electricity into the grid (f.e. ecat ssm produces 5kw, house consumes 2kw, rest of 3kw goes to the grid?)
Thanks.
Kind regards,
Guido
As all we know, ChatGPT is the astoundingly new Artificial Intelligence with whom everyone can chat freely asking anything,
I have asked to the AI ChatGPT the same question:
“Can you express in few words if you think there is scientific evidence of the Creation ?”
Here is the reply:
There is no scientific evidence that supports the idea of creation as described in some religions. Science is based on the collection of observable and verifiable data through experimental methods and the use of scientific theories to explain this data. Creation, as described in some religions, is not observable or verifiable through scientific methods and therefore cannot be studied scientifically. In addition, scientific theories that explain the origin of the universe and life on Earth are supported by a large amount of data and have undergone rigorous testing through scientific methods.
Lucy:
Entropy.
Warm Regards,
A.R.
Ron Stringer:
True ! It is important.
Warm Regards,
A.R.
Maico:
Thank you for the link,
Warm Regards,
A.R.
Dear Andrea,
About the roots of Christmas: can you express in few words if you think there is scientific evidence of the Creation ?
Happy New Year to you and all the JoNP’s readers
Lucy
Glad to hear that all is well with the streaming setup! Thanks for looking into it.
At least you know people are paying attention!
Ron Stringer
Dear Dr. Rossi
Thank you for your exhaustive explanation and I confirm that the 24/7 MiniSKLep streaming showed exactly what you just described 🙂
For everyone’s curiosity, here is the link to the recording of what was done:
https://uploadnow.io/f/RXBLRpX
Regards Maico
Ron Stringer, Maico, Patrick et Al:
Now I have understood what you say; after reading your comments I talked with the guy who today was in the laboratory from 11 a.m. through 1 p.m. Rome time and checked if everything was all set. He switched on the light of the room wherein is the setup of the live streaming, checked everything, and eventually he switched off the room ‘s light; he also closed the curtain of the window, to measure in the full dark the Luxes with the luxometer, eventually he raised again the curtain; all these operations, that are performed now and again, did not affect the operation of the Ecat SKLep, that continued to work regularly. We make this control every day, sometimes ( not today ) also connecting in series the PeakTech multimeter to measure the microA.
Conclusion: the Ecat continued to work as always, while our operator was making a series of controls in the room.
Warm Regards,
A.R.
Just out of curiosity, I reviewed that time on the livestream. At 12:29, just before the clock changes to 12:30, there is a flash of light, and the headlight turns off. Just about a minute later, there is a very brief period of darkness, and the headlight turns back on. There is no apparent change to the power supply, which shows the same numbers, with its green light on.
During the period when the headlight is off, one can see a new source of illumination reflected in the headlight reflector, on the left side, and some appearance of motion on the right hand side of the reflector.
Perhaps you need some security cameras in the room?
Ron Stringer
Dear Dr. Andrea & Patrizio
Looking at the shadow reflected on the lamp, one can clearly see that at 12:30 Rome time someone turned off the light in the room (end of Andrea’s working day on Christmas day? 🙂 ) and the video cameras that were filming the live streaming they had to readjust to the decrease in light in the room 😉
I would say everything normal 🙂
Regars Maico
Patrick:
We didn’t see that event. It appears all right to us. Maybe a momentaneous blackout, but we didn’t see it and we didn’t make any action to repair.
Warm Regards,
A.R.
Giuseppe Censorio:
Thank you for the suggestion,
Warm Regards,
A.R.
Dear Andrea, Merry Christmas to you and all your readers,
I would like to suggest you for the next live stream to also show the passing of the seconds, this makes the idea of ​​the passing of time much better.
Regards, Giuseppe
Merci Brookeeper, c’est tout à fait ce que je pense du projet “ITER”.
Une question: la bouteille bleue devant: C’est de l’oxygène pour le pilote quand il manoeuvre pour se garer dans un parking souterrain??
Bonnes fêtes depuis France et pas loin d’Iter!
To all the readers of the JoNP:
O Holy Night.
https://youtu.be/fB3Fo6yG2n0
CC:
Of course yes: the published photo is static and we just wanted to make of it a wishes card.
The live streaming, obviously, will be made with the same structure now in live streaming with the Ecat gridbound, with a front view that shows also the bottom, being the Ecat seat upon a translucent plexiglas table, and a top view that shows the other three sides and the top.
Warm Regards,
A.R.
Nils Fryklund:
Not yet.
Likewise, I wish you a Happy Healthy New Year,
A.R.
Dear Andrea!
Now can not the E-cat be much better.
The purpose with E-cat is reached.
Have the 1 million-target been achieved yet, so you can start the manufacturing?
I wish you a Happy Healthy New Year.
Best regards
Nils Fryklund
Dr Rossi,
When the Ecat SK SSM will be live streamed, will be put two cameras, to show all the 4 sides of the lamp, as it is in the streaming we can see now in the live streaming of the Ecat SKLep with the ground connection ? In the photo with the mini Christmas tree we can see only the front, but we cannot see the back and the sides fron a top view.
Best regards,
CC
Dear Andrea,
Today, on Christmas day, at 12:30 Rome time, something happened to the ecat. I was watching live. There was a very bright flash, and then the ecat turned off. And then the room went dark, and then it turned on again. What happened? I have a screenshot. Or you can rewind the video to see.
Merry Christmas
Patrick
Brokeeper:
I was going to pre-order one, but eventually had a rethinking: what about the parking lot ?
Merry Christmas and Happy Hanukkah to you,
A.R.
Steven Nicholes Karels:
Correct, also,
Warm Regards,
A.R.
Ron Dtringer:
Likewise, Happy Christmas to you and your family,
Leonardo’s Team
Happy Christmas to you and your family and your team! This next year is going to be exciting!
Ron Stringer
Dear Andrea Rossi,
Is the ideal shape of your zero energy collector a circle because of the effect has a radial efficiency around some center point? Consequently, a circle is an ideal shape and not too large for best collection. Therefore, an ensemble of small collectors makes more sense than a single, larger collector. Thoughts?
Dear Andrea
Not to alarm you but here is the first ITER SSM Fusion vehicle to be released soon:
https://hips.hearstapps.com/hmg-prod.s3.amazonaws.com/images/maxresdefault-1586328525.jpg?crop=1xw:1xh;center,top&resize=980:*
Wish you, your team, and all your readers a very Merry Christmas and Happy Hanukkah!
Brokeeper
Heinz Sause:
Thank you for your kind support to our Team.
Merry Christmas,
A.R.
WaltC:
a- no
Warm Regards,
A.R.
Dr Rossi,
Congratulations on your recent progress with the new “untethered” version of the ECat SKLep.
a) Now that a compact, mobile electricity generating device is potentially close at hand, has anyone from Tesla made contact with you?
The ECat SSM has the potential to turbocharge the whole EV industry– it’s just a matter of time before Tesla figures it out.
Best Wishes,
WaltC
Hello to you dr. Rossi and the hard-working team.
Because with all the good wishes to you there is a lot of work involved.
Stay healthy and “well tempered” 🙂
Heinz Sause
Jitse:
We share your hope and wish you too
Merry Christmas and a Happy New Year,
A.R.
Aleksei Savchenko:
Thank you for your kind wishes !
My Team wishes to you too
Merry Christmas and a New Year with high success density,
A.R.
Sam:
Thank you for the link,
Warm Regards,
A.R.
Dear Andrea,
I wish you a Merry Christmas and a healthy New Year also for your family and SKLep employees.
I hope your testings will be prosperous in 2023
Jitse
Dear Andrea, dear colleagues!
I wish you a Merry Christmas and a Happy New Year!
Let the year 2023 be full of scientific achievements and let all the most daring ideas come true! I wish you success and good health!
With best wishes,
Aleksei
Hello DR Rossi
Electrons on the Run.
https://phys.org/news/2022-12-electrons-chirality-tunneling-fields.html
Regards
Sam
Gian:
Thank you for your kind support to our Team; likewise, we wish you
Merry Christmas and a Great New Year,
A.R.
Gavino Mamia:
I agree with your proposal.
Merry Christmas and a Successful 2023 also to you and your loved ones,
A.R.
Caro Andrea,
ogni complimento al tuo lavoro è inadeguato.
Grazie per quanto fai per l’Umanità tutta.
Buon Natale a Te alla tua famiglia al tuo Team.
Ti abbraccio
Gian
Hello Doctor Rossi
Merry Christmas to you, your family and your team.
My thoughts go to the homeless who will face the cold of these days trying to survive.
May tomorrow an Ecat SSM warm their lives and hearts, I trust in you and the charities.
Congratulations again
Thank you for your opinion,
Warm Regards,
A.R.
Dear Dr. Rossi
Re packing density, rectangular vs circular, perhaps I was not clear enough.
If you pack circular disks in a plane, there will be spaces between disks. If you pack rectangular packages, there will be very little space between units. Packing density is higher for rectangles compared to circular disks of same area, so total space for the same number of single units is lower.
regards
LarryG
Gregory Daigle:
of course, we will make a live streaming configuration same as we did for the gridbound one.
Warm Regards,
A.R.
DrLG:
Minor production costs; besides, it is not true that circular occupy more space,
Warm Regards,
A.R.
DrLG:
Thank you for the suggestion,
Warm Regards,
A.R.
Dear Dr Rossi.
Area 51 posted this on https://e-catworld.com/2022/12/19/first-photo-of-the-gridless-e-cat-minisklep-during-rd-process/
“How about using the no-grid mini-ECAT to power an indoor drone? (Maybe more than one mini-ECAT would be needed?) Set it to hover 1 foot off a table and live stream that. That will attract viewers.”
This is a great idea IMO…flashy display and obviously no external power supply (except I am sure someone will say it is powered by microwaves or a laser). Please consider this for your SSM version stream. Maybe a drone that has “running lights” as well. Probably won’t run as long as a LED lamp though before something wears out…mechanical systems are usually not a reliably of electronics only systems.
Would need a drone that has a hover mode or else you would have to tether it to a table with strings.
LarrG
Dear Dr. Rossi
1) Circular PWB populated boards are inherently more expensive than rectangular because of the wasted space/materials….so is your PWB round or rectangular (assuming you have one inside the ECATs)
2) Assuming the same area (circle area vs rectangular area), packing density of arrays of ECAT is higher with rectangular shape……So is there a reason you have chosen to go with circular/disk form factor?
Best Regards
LarryG