United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

40,238 comments to United States Patent US 9,115,913 B1

  • Steven Nicholes Karels

    Dear Andrea Rossi,

    Are still working (or involved with a partner/other party) on jet engine development using eCat technology?

  • @Steven Nicholes Karels:

    “I foresee a possible use for your gridless SKLep units. Military aircraft. ….”

    And, of course, essentially unlimited range, and negligible weight of fuel.

    Rodney.

  • Andrea Rossi

    Steven Nicholes Karels:
    Thank you for your insight,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Albo70:
    Same answer as to Simon minutes ago,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Simon:
    We are ready for both versions, it will be a choice of the Customers: many pre-orders have not been changed, means there is a demand for both types.
    The price will be the same.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Norma:
    1- yes
    2- yes
    Warm Regards,
    A.R.

  • Norma

    Dear Dr Andrea Rossi,
    Still working well the Ecat SKLep SSM ? Do you confirm that we’ll see its streaming in February ?
    Cheers
    Norma

  • Simon

    Dear Dr. Rossi,
    could you mention in which specific situation a grid connected ecat has an advantage vs the SSM-ecat?
    I can not believe that there is such a situation. And Leonardo could also save the costs for the connector and transformator in case of 230V input.
    I reckon you can produce just the SSM ecat. Less versions – less costs.
    Best regards
    Simon

  • Albo70

    Dear Andrea,

    can you explain this answer better?

    I can’t imagine a situation were the grid connected version may be better tha the off grid versione.

    Perhaps I understimate something.

  • Steven Nicholes Karels

    Dear Andrea Rossi,

    I foresee a possible use for your gridless SKLep units. Military aircraft. An aircraft made of non-radar reflective material (or of stealth design), the SKLep units produce no heat, so, no heat trail for missiles to lock onto. Electric motors could provide propulsion with the electric motors surrounded by radar absorbing materials. This type of aircraft would be difficult to detect, track, or engage with conventional weapons.

  • Andrea Rossi

    Christo:
    It depends on the specific situations,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Prof:
    Thank you for the update,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rosa:
    Thank you for your attention to the work of our Team,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Wilfried Babelotzky:
    Thank you for your opinion,
    Warm Regards,
    A.R.

  • Wilfried Babelotzky

    Dear Andrea,

    I would like to make a suggestion as to how you can possibly start production immediately.
    Make the manufacturer of the ECATs the proposal that he may produce as many ECATs as he needs at his own expense, i.e. without your margin, in order to convert his production completely to CO2-free production.
    The ECAT would then be the very first energy source that really works CO2 free and the manufacturer would have a gigantic marketing advantage for his other customer. You would have no costs for it and the manufacturer has an energy source that is certainly cheaper than what he has been using so far.

    Best regards
    Wilfried

  • Prof

    Dr Rossi,
    Today the paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    reached
    Total Readings: 114000
    higher than the 99% of 15 millions papers published on Researchgate.
    And counting…
    Prof

  • Steven Nicholes Karels

    Italo R.

    If the energy supply was truly infinite, then no matter how much was harvested, no effect would occur. Otherwise, nice story.

  • Italo R.

    @ Gerard McEk

    I have asked to ChatGPT:

    Write a fictional story that contains the following elements:
    1) – on earth a scientist managed to extract infinite energy from vacuum (ZPE)
    2) – all this energy extracted from the vacuum is creating imbalances in the space-time fabric of the universe
    3) – extraterrestrial civilizations take measures against the earthlings to avoid a universal catastrophe

    It is interesting to note how ChatGPT has added particulars and details that were not part of the input

  • Gerard McEk

    @Italo R
    Interesting story Italo R!
    If you really asked ChatGPT, what did you ask it to write?
    Thanks if you can answer,
    Gerard

  • Christo

    Hello Dr. Rossi,

    Is there any advantage of the grid connected SKLEP versus the SSM version?

    Kind regards,

    Christo

  • Italo R.

    It was the day that Earth science had taken an unprecedented step forward. A solitary scientist, after years of research, had managed to extract infinite energy from the vacuum, known as Zero Point Energy (ZPE).

    This discovery had immediately changed the world, providing an inexhaustible source of clean and low-cost energy. But soon it became clear that this new energy source had an unexpected side effect: it was creating imbalances in the fabric of the universe’s space-time.

    Strange and unpredictable phenomena began to occur, such as radiation storms and gravitational anomalies. Earth scientists were alarmed and desperately sought a solution, but it was too late.

    The extraterrestrial civilizations, which had closely followed developments on Earth, took drastic measures to prevent a universal catastrophe. They invaded Earth with a fleet of advanced spacecraft, and imposed an embargo on the use of ZPE energy.

    Humans rebelled, but were powerless against their invaders’ sophisticated technology. After months of fighting, Earth was forced to submit to the conditions imposed by extraterrestrial civilizations.

    Peace was restored, but at a high price. Humanity had discovered Zero Point Energy, but had also discovered that its uncontrolled use could have disastrous consequences. The lesson had been learned at a high cost, and would never be forgotten again.

    (Written totally today by ChatGPT)

  • Andrea Rossi

    Alex Eiskoeld:
    1- yes
    2- no
    3- no
    Warm Regards,
    A.R.

  • Alex Eisköld

    Hello Dr Rossi
    Now pre orders have been opened some time it is interesting to know how popular (ratio) are the orders for 100watt and 10watt SKLep
    1) Is 100watt as popular as 10watt?
    2) Is 100watt more popular than 10watt?
    3) Is the most popular then by approx 2x 5x 10x or more?
    Thank you for your time
    Alex

  • Andrea Rossi

    Maico:
    1. yes
    2. yes
    3. exactly, based on our past experience
    4. also
    5. yes
    6. c
    Warm Regards,
    A.R.

  • Andrea Rossi

    CC:
    Thank you for your kind attention to the work of our Team,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Engineering 48:
    Entropy decreases are actually “reverse differences of Entropy”.
    The discussion with Prof Sven Kullander was focused on the issue of the paragraph 1 of
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Warm Regards,
    A.R.

  • Engineer48

    Dear Andrea,

    You must have become very excited when you discovered that when a vacuum polarised & virtual pair charged shielded electron forms, it’s ordering increases, entropy decreases and energy is given off.

    Was this the idea Prof Sven Kullander shared with you?

  • CC

    Dr Rossi,
    Congratulations for the stunning statistics on Researchgate: a multiple peer reviewing made by the highest international scientific echelons.
    Best,
    CC

  • Maico

    Dear Dr Rossi
    If I may, I would like to try to summarize a few points to understand if I’ve missed something:

    1) Have both the Mini SKlep Wired and the SSM already obtained the Safety and CE certification?

    2) Have both the Mini SKlep Wired and the SSM already carried out the performance certification, based on the technical specification, by an internationally known certifying body?

    3) If yes, will the documentation certifying points 1) and 2) be supplied only during the delivery phase of the product so as not to give an advantage to the competition and not “complicate life” for the companies that have carried out the certification?

    4) Is the objective of the 24/7 Mini SKLep SSM Streaming to allow you to finally reach the million pre-orders and start with production and delivery? (which we are all looking forward to)

    5) If after 6/8 weeks from the 24/7 streaming of the Mini SKlep SSM the goal of one million pre-orders has not yet been reached, do you already have other “Public Actions” in mind to reach the goal?
    a) Public demos inviting Tech influencers?
    b) Advertising in newspapers and magazines in the energy sector?
    c) Other?

    Thanks in advance for your replies 🙂

    We are all anxiously awaiting the wonderful news of the start of production.

    Regards Maico

  • Journal Of Nuclear Physics

    Dear Readers
    Today has been published on the JoNP the article “Technology Proposal to Prevent the Release of Fukushima Tritium into the Ocean”, by Dr Vitaly Uzikov and Eng. Irina Uzikova,
    JoNP

  • George

    @Vitaly Uzikov and Irina Uzikova,
    Congratulations for your paper published yesterday on the JoNP.
    Did you receive interest from Japan for this important technology ?
    Best
    George

  • Andrea Rossi

    Maico:
    1- yes
    2- no
    3- maybe
    Warm Regards,
    A.R.

  • Andrea Rossi

    Mez:
    1- same
    2- n.a.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Martin:
    The Step-Up is the device that raises the Voltage of a DC flow without changing the power ( moreless, depending on the efficiency of the Step-Up ).
    Otherwise, you can combine more units in par or in ser to obtain the Voltage and the power you need.
    Warm Regards,
    A.R.

  • Martin

    Dear Andrea ,
    My question was :
    If I order an SKLep 100 W. with DC output, will it be delivered with a 12V. or 120V. Output ?

    Your answer : 12 VDC, to obtain 120 VDC you will need a step up

    New question :
    1. What do you mean with “ a step up “ ?

    2. Does this mean that I cannot connect 600 W. ( 6 x SKLep 100W.) to an inverter with input +/- 360 VDC?

  • Mez

    Dr Rossi
    Good to hear that mini SKLep SSM still enduring R&D ok
    Two questions please:
    1) Is this same design or Update from the SSM already certificated?
    2) If Update will this new one need also be certificated?
    Thank you if you can answer
    Warm regards
    Mez

  • Maico

    Dear Dr. Rossi
    1) After the start of the 24/7 Mini SKLep SSM streaming, do you expect a further increase in the number of pre-orders?

    2) Are you confident that within a few weeks you will be able to reach one million pre-orders to start production?

    3) Do you think that the Big Buyer you met in December after watching the Mini SKLep SSM stream can materialize his pre-orders and therefore help you finally reach the goal of one million pre-orders to start production?

    Regards Maico

  • Andrea Rossi

    Martin:
    1. 12, to obtain 120 VDC you will need a step up
    2. n.a.
    Warm Regards,
    A.R.

  • Engineer48

    Dear Andrea,

    Your knowledge, understanding and application of virtual pair charge shielded electrons is very impressive.

    Anyone who doubts your work should study this subject.

  • Martin

    Dear Andrea ,

    1. If I order an SKLep 100 W. with DC output, will it be delivered with a 12V. or 120V. Output ?

    2. If this is with a 120V output, and I want to connect 3 pieces in series to get 360V to connect to an inverter: can the 3 separate ECat’s be adjusted to have the same 120V output ?

    Thanks for answer.

  • Andrea Rossi

    Anonymous:
    So far, so good,
    Warm Regards,
    A.R.

  • Anonymous

    Dr Rossi,
    How is behaving the Ecat SSM under R&D ?

  • Steven Nicholes Karels

    DrLG,

    I had previously suggested to AR to use a few of the shipping containers onboard the Container Ship to hold the SKLep units to power the main propulsion system.

    With almost unlimited power, very fast Container Ships could rapidly cross oceans and virtually never need to stop for refueling. No need for transit fossil-based fuels while at sea and no need for shore power while at port.

    Some short distance shipping ships are being built using battery technology. So, the transition to SKLep-based systems should be smooth.

    The questions are:

    1. Does SKLep technology really work?
    2. Can SKLep devices be made in massive production rates and quantities?

  • Andrea Rossi

    Prof:
    Thank you for the update,
    Warm Regards,
    A.R.

  • Prof

    Dr Rossi,
    Here are the stats of your publications on Researchgate I found now in the reference
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Total Readings: 124,000 ( more than the 99% of over 15,000,000 publications on Researchgate )
    Reccomendations: 8,675 ( more that the 97% of over 15,000,000 publications on Researchgate )
    Citations + Mentions: 70
    Research Interest Score: 2,232 ( more than 99% of over 15,000,000 publications on Researchgate )
    Most Readings by Geographic Areas: Europe, America
    Most Readings by Cathegories: A.I., Electronic Engineering, Chemical Engineering, Theoretical Physics
    Most readings by Seniority: Professors, PhD Students, Corporate Seniors
    And counting…
    Cheers
    Prof

  • Andrea Rossi

    Patrick:
    I already answered: done, but we are not going to publish it before the deliveries, for obvious reasons.
    Warm Regards,
    A.R.

  • Patrick

    Dear Andrea,
    There’s been a lot of talk about certification but it’s a little confusing. There are two types of certifications:

    1. Safety Compliance Certification – that the device is safe and compliant to use by law

    2. Performance Certification – that the device can perform and produce the power as advertised.

    We know that you have 1 already.

    How about 2, are you getting a 3rd party to do this and when?

    Best regards,
    Patrick

  • Andrea Rossi

    Steven Nicholes Karels,
    Thank you for your insight,
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>