United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

40,385 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Calle H:
    We are studying this solution,
    Warm Regards,
    A.R.

  • Andrea Rossi

    albo70:
    I think within a couple of weeks we will stream publicly the video of the Ecat SKLep SSM that so far has been restricted to our facilities, contingent with the fact that it continues to work without problems. I am optimist.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Siegfrid Brandt:
    We did not note any disservice.
    Warm Regards,
    A.R.

  • Siegfried Brandt

    Dear Mr. Rossi,

    some people in Germany use GMX as their email provider. I have now noticed that GMX does not deliver emails from you, not even in the spam folder. That means: For orders from E-Cats the confirmation did not arrive. And even worse: If you want to write to these customers soon, that the delivery is pending now, they won’t receive that either.

    With kind regards
    Siegfried

  • albo70

    Dear Andrea,

    today is February 1st, are you able to give an estimate date about the start of the streaming related to the SSM device ?

  • Calle H

    Dear Dr. Rossi,
    This question may have been asked before. By looking at the size of the SSM E-cat it looks like about the size of a 1.5V “D” battery diameter 32 mm and height 61 mm. Would it be possible to fit the E-Cat into this cylinder size and make it at 1.5 volt? Users can then use E-cat batteries as direct replacement in appliances or connect E-cat batteries in series and in parallel to whatever voltage and amperage they want by using standard D size battery holdings.
    Thank you for your fantastic work.
    Calle H

  • Lars Olov

    Dear fellow energy followers,
    With zero point energy you take advantage of the energy apparing and disappering in vaccum. There are allways same amount appering that disappering in and out of the vaccum. The energy have different wave lengths. But if you put plates extreamly close to each other you can use the energy from the wave lenghts that are longer than the distans between the plates.

  • Andrea Rossi

    Tom Conover:
    We are not “patching together” modules, we are assembling modules and the assemblies are stable.
    Warm Regards,
    A.R.

  • Xavier Pitz

    Dear Andrea, Wilfried,

    Wilfried, about your source and sink anologies. I also thought about it a lot since the E-Cat SKL was announced…

    At first it required having a connection to the grid and to the earth.
    At that time I was thinking that the E-Cat SKL was generating an excess of electrons (see Andrea’s researchgate paper & the related “electron cluster” chapter) and for it to be able to do any useful work / generate power, electrons would have to be “dumped” through/to the earth connection to allow current to flow.
    Otherwise I was imagining it only be able to build a static charge until what I imagined would be like a “saturation” of electrons in the E-Cat device itself.
    I also imagined very long term negative effects like what could have happened if millions/billions of E-Cats would have dumped excess electrons to the earth crust until saturation.
    Would then electricity stop being able to flow on earth surface ? Strange questions that probably not many people ask themselves…

    Since a few weeks we learned that the E-Cat SKL doesn’t require a grid & earth connection anymore.
    So my previous assumptions doesn’t hold unless… The new SKL version is now able to build electron clusters on the cathode side but also positron clusters on the anode side.
    This would make the new version of the E-Cat SKL a source and the sink at the same time, and not only one or the other.
    That would make it able to “close the circuit” without it requiring an earth connection.

    Just my 2 cents…

    Best Regards,

    Xavier Pitz

  • Tom Conover

    Greetings to Jonp Members!

    Dear Andrea,

    I will need 1KW units to operate my geothermal house. Have you been able to stablize the devices to product 1KW units without patching together the 10w units?

    Thank you for your ongoing development efforts!

    Tom

  • Mez

    @Wilfried

    It is suggested that a dipole is formed by separation of positron and electron particle pair – arrange for circuit across dipole through load, permit electrons to return through circuit and recombine with positron to release photon at anihilation of particle pair

    I think this is easy part!

    How to start produce particle pairs at low energy and small volume – this is hard part 🙂

    salut
    Mez

  • Andrea Rossi

    Wilfried:
    This kind of information is confidential.
    Warm Regards,
    A.R.

  • Wilfried

    Dear Andrea,

    when you look at converters to electrical energy, there is always a source and a sink. In a battery, these are the anode and cathode. In a generator, it is charge displacement through magnetic attraction and magnetic repulsion.
    Is it possible to describe the source and sink of the ECAT from this point of view? According to my understanding, the zero-point energy would have to be both source and sink at the same time. How does the mechanism of recombination of the charge carriers work, i.e. where do the electrons of the current flow to?

    Best regards
    Wilfried

  • Andrea Rossi

    Alex Eskoeld:
    Yes,
    Warm Regards,
    A.R.

  • Alex Eisköld

    Hello Dr Rossi
    1 question if you please-
    Does provide the Mini SKLep SSM output DC safely isolate from internal power source?
    Thank you for reading
    Alex

  • Roberto

    @Weleda
    Kudos to your comment: such a comment was past due.
    All the best
    Roberto

  • Andrea Rossi

    Robert Maxwell:
    Thank you for your blessing: we need it.
    The answer 2) is correct,
    Warm Regards,
    A.R.

  • Robert Maxwell

    HI, Dr Rossi
    If I can ask two questions able SKL operation.
    If I have a Ecat SKLmini that can handle a 10watt load and I connect a 15watt load to it.
    1)Does the SKLmini disconnect the load and try to reconnect after short period of time.
    2)Does the SKLmini act like a circuit breaker, so it disconnects and has to be manually reset.

    Blessing to you and your team.

  • Weleda

    @Wilfried Babelotzky
    About your today’s comment, I have some answers to your 3 bullets:
    1
    Solar panels do not have a happy life of 10 years, because after several years they start to lose efficiency, not to mention the fact that they work at their max efficiency for not more than an average of few hours per day, while the Ecat works 24 hours per day, because it does not need sun

    2
    Giving away for free his technology would kill any serious investment in it. Take the example of vaccines: they are researched for and manufactured only thanks to the connected intellectual property; without intellectual property nobody would have spent the funds necessary to invent, manufacture and distribute them

    3
    Probably the 99% of the guys you talk with are trolls paid by Rossi’s competitors, because when I happen to talk about him, the 99% of persons think he is making honestly an important work; by the way, perhaps you don’t know that the paper that Andrea Rossi has published on Researchgate has reached more than 124000 readings , a number superior to the readings reached by 15 millions of scientists, researchers, Nobel Prize winners that published their works on Researchgate, and the cathegories of these readers are mostly Professors, PhD students, Researchers, Seniors of corporations, while the main matters of their job are Electronic Engineering, Chemical Engineering, Theoretical Physics, A.I., Energy Generation; I am sure you will be surprised to know that these readers sent to Researchgate many thousands of reccomendations, and that the Research Interest index of the publication of Dr Rossi is higher than the 99% of 15 million publications on Researchgate
    Ref.: http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions

    4
    About your question to Dr Rossi concerning why he does not certify the number of pre-orders he received: how do you dare to ask him this ? Nobody of us has paid him a single cent to make the pre-orders he is the only one who spends his money in the Ecat enterprise, and you spread the doubt that he hiddens the number of pre-orders he got ? Did you read his comment of yesterday ? He continues to receive, among honest ones, pre-orders from fraudsters that have companies that, after vetting, turn out to be empty boxes with no funds at all, and place orders for thousands of Ecats knowing that they will never be able to pay.
    Rossi is struggling with the enormous difficulties of the Ecat operation and the best thing we can do is let him work in peace.
    All the best,
    Weleda

  • Andrea Rossi

    Wilfried Babelotzky:
    Thank you for your insight,
    Warm Regards,
    A.R.

  • Wilfried Babelotzky

    Dear Andrea,

    here are a few aspects that concern me:
    1) The actual lifetime of a solar panel is 30 to 40 years. Please do not be afraid to design the ECAT to last as long as possible. It should not be about building a maintenance and replacement industry. The amount of energy that humanity could use is limitless as far as we know today. The long-term goal of the ECAT should be a micro-module optimised for power-to-weight ratio and lifetime.
    2) What are your innermost motivations? Is it about your person in terms of recognition and prosperity, is it about humanity, is it about creation earth as a whole?
    You could also send 1000 micro ECAT SKLep SSM together with a DVD with all production documents to 1000 different manufacturers worldwide, with the request to produce licence-free at your own expense. This would certainly introduce the ECAT.
    3) 99% of the people I talk to about the ECAT find it ridiculous that I deal with such nonsense that is not physically possible.
    Few do their own research on ECAT and you on the internet and all those who did came back to me with the “knowledge” that you were a convicted fraud.
    The world is against you and your invention, out of ignorance, out of fear, out of self-interest, out of malice or out of blind trust in the masses.
    I see you want to do well, but there is no way to 100% secure it.
    If you listen to yourself, you will probably agree with me that it is not about a number of orders, but about speed in marketing and scaling of production. If the price and the product are right, EVERYONE would buy ECAT.

    Best regards
    Wilfried

  • Andrea Rossi

    Udo:
    Quite right !
    When we receive pre-orders for big amounts of units we pass the pre-order form to the attorney of Leonardo Corporation, who has the necessary tools to make a thorough vetting of the company and its CEO, to analyse the financial grounds and the criminal record, if any.
    Warm Regards,
    A.R.

  • Udo

    Dr Rossi,
    can you explain how Leonardo Corporation decides if to accept or not a “big buyer” order ?
    I think that to take account of orders for thousands of units without a guarantee is quite dangerous, don’t you think ?
    Best,
    Udo

  • Andrea Rossi

    Koen Vandewalle:
    Thank you for your insight,
    Warm Regards,
    A.R.

  • Andrea Rossi

    CC:
    Yes,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Sarka Vybiralova:
    The timing to deliver is explained in
    http://www.ecatorders.com
    Warm Regards,
    A.R.

  • Šárka Vybíralová

    Hello, I wanted to ask if the date for the start of sales to the Czech Republic is already known? I have an order for 10 x E-Cat SKLep 100 and still no new news. Thank you

  • CC

    Dr Rossi,
    Will the weight of the Ecat SKLep SSM be the same of the Ecat SKLep we can watch in the live streaming on the video I saw here:
    http://www.ecat.com ?
    Best
    CC

  • Koen Vandewalle

    Dear Andrea Rossi,
    You continue to amaze friend and foe with the development of ever-improving versions of one of the most important inventions in human history.
    Meanwhile, the design has become so good that in the eyes of many people it has become too good to be credible. This is not least because just about every school and technical university teaches that you cannot create energy out of nothing. All chemistry and physics classes are built on theories that make your invention impossible, at least with the formulas presented in class.

    In my circle of friends and family I often have conversations with people who have received a high level of education, and I notice that people mainly rely on what is posited in the media and scientific circles by authoritative institutions.

    When I tell them about the ECat, I feel that they consider me an idiot who believes in a fable. On the other hand, they are full of expectations when it comes to solar panels, wind turbines, hydrogen, heat pumps, batteries and geothermal energy. I was interested in those techniques in 1995, but then nobody was interested in them and you were considered an idiot or an idealist if you wanted to buy them.

    I am a little afraid that wisdom and vision are too scarce in this world or that they are used for wrong purposes. It is no coincidence that the owner of all kinds of luxury brands (LVMH) is about the richest person on earth.

    I think you are treated unfairly by this world because of a systemic error in the society of the people. I therefore even wonder whether there will ever be a commercial strategy that does justice to the real inventors. In my opinion, this world is too much about the consolidation of financial capitals. This is a kind of religion that resembles power systems from the Middle Ages in many aspects.
    It could well be that those power systems on the one hand, and the ignorance of the mainstream population, keep the genie in the bottle as far as the ECat is concerned.

    If I may make a suggestion for a next demonstration: perhaps set it up a little bigger and do something again with a large amount of boiling water, of which we see several tens of kilograms evaporating every day.

    Regards,
    Koen

  • Andrea Rossi

    Anonymous:
    We are studying them. I agree with you,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Paul Dogshun:
    You are right. We will publish also the references to the Ecat SKLep SSM when we will introduce it by the live streaming.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Erasmo Bardelli:
    The efficiency of the inverters depend on the model you will choose; normally it is 95% for the good quality ones; we will give the necessary specific information to our Clients when we will contact them to deliver, and in that phase the pre-orders will be corrected if necessary, if the Client will decide to proceed to turn the pre-order into an actual order. In contrary case, the Client will be free to cancel the pre-order, as explained in the pre-order form.
    Warm Regards,
    A.R.

  • Carissimo Dot. Rossi
    Situazione Specifica: la mia domanda è per capire quanto si perde nella conversione da DC-AC in poteza.
    Se il mio fabbisogno è di 1000w , non un watt di meno,
    10 E-Cat da 100w sono suffficenti per avere in
    tensione continua e in corrente per avere la potenza che serve con il carico da 1000w ?
    Se poi aggiungo un convertiture per avere 220vac, una perdita di potenza è inevitabile.
    Presumo che il n° da ordinare sia maggiore a 10 anche per avere un certo margine di sicurezza
    Queste cose sono da specificare ai tuoi clienti altrimenti saranno necessari ulteriori ordini dopo la prima consegna.

    ENGLISH SYNOPSIS: How much is the loss of the inverters/transformers ?
    How can your Clients decide how many Ecat they need ?

  • Paul Dodgshun

    Andrea Rossi,

    https://ecatthenewfire.com/pre-order-the-ecat-sklep/ and sub-pages do not appear to reference the Ecat SSM. May I suggest an update in several places?

  • Anonymous

    Dr Rossi,
    The suggestions of Neri Accornero are very intelligent: will you apply them ?

  • Andrea Rossi

    Jon Darrell:
    It is completely uninterrupted DC,
    Warm Regards,
    A.R.

  • Jon Darrell

    Dear Dr. Rossi,

    I would like to ask:

    A) Is the electricity output from the E-Cat SKLep SSM completely uninterrupted DC?

    or
    B) The output is DC, but contains small discontinuities on the order of milliseconds or millionths of seconds.

    Have A Successful Year 2023

    Jon D.

  • Andrea Rossi

    Erasmo Bardelli:
    It depends on the specific situations,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ron Stringer:
    The suggestions of our Readers are always taken in serious consideration and many of them are important.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Engineer 48:
    No. Also this issue has been measured by the certificators.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Neri Accornero:
    Thank you for your insight and your suggestions,
    Warm Regards,
    A.R.

  • Dear Andrea, the more I think about the “ECAT battery” the more I believe it could be your trump card:

    1: Factories you plan to activate for construction should only deal with one battery model (12v 10W), at least for the first year.

    2: If you were able to make them in a standard format such as 18650 or 26560 lithium or AA stylus, there are many modular battery holder systems on the market that allow series / parallel assembly by the buyer according to his needs.

    3: All manufacturers of battery-powered devices (portable lamps, power tools, etc.) would be the first buyers and you would quickly reach the booking target you deem appropriate.

    4: You shouldn’t worry about supplying 1, 5, 10 or 100 kW power systems according to the buyer’s requests which would involve diversification in the assembly line, construction time, testing, storage and then distribution, and above all you would not have the responsibility of the functioning of the entire system and of any damage due to its malfunction.

    5: you would begin to penetrate the market ” bottom up” giving less annoyance to the large energy producers and suppliers, who would not immediately notice the revolution you are about to trigger … you only sell 10W batteries, who should be afraid?

    The activation method remains to be studied carefully if you do not want to sell already activated “batteries”, I will send some ideas and drawings to your address.

    Neri

  • Engineer48

    Dear Andrea,

    Does the SKLep or SKLep SSM generate any external magnetic fields that need to be taken into consideration?

    Thanks in advance,
    EE48

  • Ron Stringer

    Dear Dr. Rossi,
    I love how gracious you are in your replies – I think we (at least I speak for myself, here) come up with the most ill-imformed, craziest ideas and you will still thank us for our insights! Maybe every once in a while there’s a pearl for you, at least I hope!
    Ron Stringer

  • Caro dottor Rossi, una domanda per la mia curiosità ma che potrebbe servire anche a chiarire alcune cose nel blog .
    Il Tuo E_Cat ha l’uscita di 10v dc e sopporta un carico di 100w.
    Vale a dire un carico di 1 Ohm e 10A.
    Con questo carico massimo stabilito la tensione rimane a 10v o cade leggermente.
    Il Tuo consiglio dopo i Tuoi test a che percentuale è meglio caricare l’E-Cat?

    A mio parere il lavoro dopo l’uscita in tesione dall’E-Cat è , per una certa sicurezza di funzionamento , più complessa di quello che la mggior oarte crede.
    GRAZIE e BUON LAVORO.

    ENGLISH SYNOPSIS: which Voltage do you suggest at the output of the Ecat ?

  • Andrea Rossi

    Ron Stringer:
    Thank you for your insight and your suggestion,
    Warm Regards,
    A.R.

  • Ron Stringer

    Dear Dr. Rossi,
    I am finding the discussion of a “battery” format with polar contacts at each end of the SSM units very interesting. When I saw the new design, a cylinder of 30 x 60 mm, I immediately envisioned a long tube, like a flashlight body, to hold them. Pressure contacts at each end of the tube, pop the individual units in, screw on the top, et voila! 10 stacked cylinders make a 120v, 100w tube, ten tubes in parallel give you 1Kw. Tubes can be used in various configurations for different uses. It would allow you to use solutions already devised for batteries, such as leaf or coil spring contacts. Easy to assemble and disassemble, and it would be intuitively obvious how the collections work. I don’t know how practical that is, but it popped into my mind as a possibility.
    Ron Stringer

  • Andrea Rossi

    Neri Accornero:
    Thank you for your suggestion, I agree this solution is intelligent.
    Warm Regards,
    Andrea Rossi

  • Andrea Rossi

    Jean Pierre:
    Thank you for your insight and suggestions,
    Warm Regards,
    A.R.

  • Jean Pierre

    Dear Andrea.

    From my own simplistic assumptions and calculations I believe that about 17 SKSSM 10W reactors will be able to fit nicely behind the back seat of a Tesla Model 3 and continuously feed its basic battery pack ( rated at 50kWh energy storage) from a cable through the floor to this big pack. The idea assumes that this pack needs to be 100% run down and recharged to its full capacity,some 30 times, and also the 17 reactors never stop charging the big pack. This means that no external charging is needed over the next 10 years of the SSM’s assumed life span of about 10 years. Calculations to illustrate this notion are as follows:

    Basic data used: (hoping no zeros have been dropped )

    a) 1h = 3600s and 1year = 31,536,000s
    b) 50kW = 50,000 J/s
    c) 50kWh = 180,000,000 J J stands for Joules

    Basic assumptions let us use:

    Average Driver mileage per year = 9,000
    Warm condition total range = 300 mi

    So, 30 full emptying/top-ups per year are needed. This equates to
    30 x 180,000,000 J using c) above.——–1)

    Now, Assuming one SKSSM is running at an output 10W = 10 J/s , it can supply 10J/s x 31,536,000s for a whole year = 315,360,000 J.

    30 recharging sessions will yield 30 x 315,360,000Joules——-2)

    Thus, to get how many reactors will be needed, we use numbers in 1 and 2 above;

    Total number of reactors = 30 x 180,000,000/315,360,000 = 17.1

    If one can get 17 reactors side-by-side across the width of the Tesla or there are 2 rows of 8 or 9 one on top of the other, then this very simplistic analysis indicates to me that, volumetrically, this is doable. However, I do accept that there could be other things that are being ignored and might well invalidate this exercise.

    Any comments? Thanks. Jean Pierre.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>