1. Is the design of the interface with the EV Battery System dedicated this one type (Manufacture and Model) of EV
or
2. Can it be readily interfaced to a number of different EV Battery Systems, with the proper knowledge and skill set?
Dr Rossi,
here are the stats of your publications I found today on http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 143000 (of which 130923 only for “Ecat SK and Long Range Particle Interactions”) more than 99% of 1.5 million publications on Researchgate
Research Interest Score index: 2948, more than 99% of 1.5 milion publications on RG
Reccomendations: 11423, more than 99% of publications on RG
Most readings by cathegories: electronic engineers, chemical engineers, theoretical physicists, researchers
Most readings by seniority: Professors, PhD students, seniors
Most readings by geographic areas: USA, Europe, Japan
And counting…
Prof
I suggest you develop a 300W, 36VDC or a 400W, 48VDC unit. This unit would be designed to integrate with solar panel interfaces such a microinverter or string inverter. The unit should be capable of serial connections to accommodate a serial string voltage of at least 1,000VDC when dealing with string inverters or their equivalent.
I suggest that each unit have a remote output enable to control whether the output power is enabled or disabled. And some form of communication with a unique ID or address, health information, total operating time, voltage, current, power, temperature, and other important data. The communications port might be a hardware port or something like a bluetooth compatible communications capability.
This would be a direct replacement of solar panels for new designs but designed for 24/7 continuous power output.
The savings would be in reducing the required land space, they could be located inside buildings, they would not require surface cleaning, and they would operate continuously and independent of weather.
Although this conceptual unit could be constructed by 3 or 4 100W NGU units, a single unit would facilitate handling, installation, communications, and simplify integration.
Dear Dr. Rossi,
maybe you are interested in these answers i ask at Chatgpt:
Me: At what price per kWh of energy would vertical farming become profitable: 1. when growing vegetables 2. when growing wheat 3. when growing potatoes.
Answer chatgpt
Determining the specific price per kilowatt-hour (kWh) at which vertical farming becomes profitable for growing vegetables, wheat, and potatoes involves several factors, including the costs of operations, the yield per square foot, market prices for each crop, and the specific energy requirements of the farming process. Here are some general considerations for each crop: (i shortened the answer)
Based on the above considerations and general market conditions:
Vegetables: Below $0.10 to $0.20 per kWh
Wheat: Below $0.05 to $0.10 per kWh
Potatoes: Below $0.05 per kWh
These figures are rough estimates and can vary significantly based on local conditions, the specific technology used in vertical farming, energy prices, and market demand. To make a more precise assessment, a detailed financial analysis considering all costs and yield expectations is necessary.
I hope the ecat come to mass production soon.
Best regards
Z.Roeden
@Horst Dieter Preschel
I know these pages, but the comprehensive memories are more clear. It seems to me that the development is reaching the starting position. In that case, it will be commercially good for the general public to get to know the inventor. Business strategy is sometimes more important than the invention itself.
Warm Regards J.Š.
Dear Dr. Rossi,
what would happen if i plug in 2 x 2KW electric heaters to a 3KW ecat ngu:
1) Will they, because it is an ohmic load, just heat with 2 x 1,5KW?
2) It will shut off?
Best regards
Reinhard
Aldo Greco:
The attendance, for security reasons, will be very limited and restricted to persons professionally involved in our industrial and commercial activity; the public will assist through the streaming that will cover the whole event,
Warm Regards,
A.R.
Wilfried:
No, because his would be very dangerous: it would result in severed assistance and guarantees by the manufacturer, should you manipulate his systems.
Only a manufacturer can adopt our system, integrating it in his ones.
Warm Regards,
A.R.
would you, or the Leonardo Corporation, accept a private order to equip the VW ID Buzz GTX long version (or any vehicle) with E-Cat and adapt it to the battery system? Or do you insist that the manufacturer must do this?
Wilfried:
1- Basically yes, with some adjustments for the specific situations
2- I do not understand what do you mean: can you rephrase ?
Warm Regards,
A.R.
1. Will the same track used (the one in Italy, as I recall)?
2. Will same cars be used (same manufacturer, same model)?
3. What speeds do expect to achieve?
Are the new electronics for adapting the E-Cat to the car battery designed in such a way that it can be easily or even automatically adapted to other vehicle-battery combinations?
Would they accept a customization as an order?
I still want a VW i-buzz gtx long version with E-Cat technology.
Jan Srajer:
After I will complete my work, maybe I will follow your suggestion. Now I do not have time.
Thank you for your suggestion, though,
Warm Regards,
A.R.
Mr.Rossi
True, this blog is such a memory, but far more significant are the memories of life as a whole. I’d say it’s about time someone wrote your life experiences: Where did you grow up, where did you go to school, who are your friends and enemies and finally how did you come up with the idea that led to the production of the E-cat. After all, your life, from the point of view of an ordinary reader, resembles one big adventure.
Dr Rossi,
In the demo of the Ecat powered EV, will there be an independent expert of the car manufacturer to certify the genuinity of the cars original batteries ?
Will the demo of the E-Cat powered EV be made with two EVs, one powered by the Ecat , the other only with the original battery, at the same speed to see if the Ecat powered lasts more ?
An interesting post. One correction – 4 100W NGU units, connected in series, will produce 48 VDC at 400 Watts. Instead of a simple control device, one could use a diode bridge that accepts both inputs: one input from the solar panel; and the other input from the NGU units; and outputs whichever input has the highest voltage. In this conceptual system, the solar panel would likely provide the 400W/450 Watts around local noon time. All other times would be the NGU units.
You might also consider using only 3 NGU units in series, to save costs, to get more time that the solar panel is producing the greater power.
Peter Bees:
You made a good point.
Anyway, particular custom assemblies will be discussed when we will be ready to deliver. In general, any kind of assembly can be contained in a box similar to the one shown in http://www.ecat.com
Warm Regards,
A.R.
I wonder if four E-Cat SKLep NGU devices were assembled in a case and installed as a ‘backpack’ for a typical 400/450W solar panel (in a pass-through style, like an optimizer), could they provide 100W of continuous electrical power at 48V? Additionally, with a simple control electronics, could they activate when the voltage produced by the panel ceases, as normally occurs at sunset or due to any other issue. Of course, the cost impact per panel would be significant; however, on an industrial scale, the cost could be significantly reduced, ensuring widespread adoption comparable to that of photovoltaic systems, of which this would become an important integration, transforming them into 24-hour production systems. Such an installation, for example, composed of 10/12 panels, thus a small system, would make available 1KW/1.2KW of power even in the absence of sunlight… I think it would be fantastic.
Steven Nicholes Karels:
It is specifically designed for the specific EV,
Warm Regards,
A.R.
Jim McKey:
Thank you,
Warm Regards,
A.R.
Dear Andrea,
could you tell us the dimensions of the smallest E-Cat plasma chamber that has worked so far, just the plasma chamber, without wiring.
Best Regards
Wilfried
Hello DR Rossi
Another Documentary on Nikolas Tesla.
A good one.
https://youtu.be/BmxEoCmIpJ4?si=Dmr4Jkz0qGspvwnj
Regards
Sam
Dear Andrea Rossi.
On the EV Demonstration –
1. Is the design of the interface with the EV Battery System dedicated this one type (Manufacture and Model) of EV
or
2. Can it be readily interfaced to a number of different EV Battery Systems, with the proper knowledge and skill set?
Andrea,
there’s nothing to be stunned about: the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
introduces revolutionary concepts, and in paragraphs 6 and 7 gives experimental proof of their validity,
Best
Jim
Luca Bertani:
I am stunned, naver thought this paper could reach such an achievement !
Warm Regards,
A.R.
Steven Nicholes Karels:
Optimist,
Warm Regards,
A.R.
Dear Andrea Rossi,
Less than 3 months to your demonstration(s). How do you feel?
Dr Rossi,
the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
has reached 130950 total readings, much more than papers of Physics Nobel Prize winners: how do you feel about this unbelievable achievement ?
Good luck for your Ecat powered EV demo,
Luca Bertani
Prof,
Thank you for the update,
Warm Regards,
A.R.
Dr Rossi,
here are the stats of your publications I found today on
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 143000 (of which 130923 only for “Ecat SK and Long Range Particle Interactions”) more than 99% of 1.5 million publications on Researchgate
Research Interest Score index: 2948, more than 99% of 1.5 milion publications on RG
Reccomendations: 11423, more than 99% of publications on RG
Most readings by cathegories: electronic engineers, chemical engineers, theoretical physicists, researchers
Most readings by seniority: Professors, PhD students, seniors
Most readings by geographic areas: USA, Europe, Japan
And counting…
Prof
Steven Nicholes Karels:
Thank you for your insight,
Warm Regards
A.R.
Dear Andrea Rossi,
I suggest you develop a 300W, 36VDC or a 400W, 48VDC unit. This unit would be designed to integrate with solar panel interfaces such a microinverter or string inverter. The unit should be capable of serial connections to accommodate a serial string voltage of at least 1,000VDC when dealing with string inverters or their equivalent.
I suggest that each unit have a remote output enable to control whether the output power is enabled or disabled. And some form of communication with a unique ID or address, health information, total operating time, voltage, current, power, temperature, and other important data. The communications port might be a hardware port or something like a bluetooth compatible communications capability.
This would be a direct replacement of solar panels for new designs but designed for 24/7 continuous power output.
The savings would be in reducing the required land space, they could be located inside buildings, they would not require surface cleaning, and they would operate continuously and independent of weather.
Although this conceptual unit could be constructed by 3 or 4 100W NGU units, a single unit would facilitate handling, installation, communications, and simplify integration.
Thoughts?
Z. Roeden:
Thank you for this information and for your support,
Warm Regards,
A.R.
Dear Dr. Rossi,
maybe you are interested in these answers i ask at Chatgpt:
Me: At what price per kWh of energy would vertical farming become profitable: 1. when growing vegetables 2. when growing wheat 3. when growing potatoes.
Answer chatgpt
Determining the specific price per kilowatt-hour (kWh) at which vertical farming becomes profitable for growing vegetables, wheat, and potatoes involves several factors, including the costs of operations, the yield per square foot, market prices for each crop, and the specific energy requirements of the farming process. Here are some general considerations for each crop: (i shortened the answer)
Based on the above considerations and general market conditions:
Vegetables: Below $0.10 to $0.20 per kWh
Wheat: Below $0.05 to $0.10 per kWh
Potatoes: Below $0.05 per kWh
These figures are rough estimates and can vary significantly based on local conditions, the specific technology used in vertical farming, energy prices, and market demand. To make a more precise assessment, a detailed financial analysis considering all costs and yield expectations is necessary.
I hope the ecat come to mass production soon.
Best regards
Z.Roeden
@Roberto Ridolfi,
I agree with you, but I think that the most important theoretical legacy of Andrea Rossi will remain the paragraphs 6-7 of the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
that have been already replicated
@Jan Srajer
While http://www.ingandrearossi.net is very important, I agree with you,
Best
Roberto
@Horst Dieter Preschel
I know these pages, but the comprehensive memories are more clear. It seems to me that the development is reaching the starting position. In that case, it will be commercially good for the general public to get to know the inventor. Business strategy is sometimes more important than the invention itself.
Warm Regards J.Š.
Reinhard:
2
Warm Regards,
A.R.
Giuseppe Censorio:
Yes
Warm Regards,
A.R.
Jitse:
Thank you for your support,
Warm Regards,
A.R.
Dear Rossi,
I have read the history document, my admiration for you and your very careful work on the Ecat products.
The 1M 100Watt units as a goal for the world and the start is also very clear to me.
Thank you and good luck in October with the 2 demonstrations,
kind regards Jitse
Dear Andrea,
will the scheduled Demo be held in the same location where it was scheduled last year?
Best Regards, Giuseppe
Dear Dr. Rossi,
what would happen if i plug in 2 x 2KW electric heaters to a 3KW ecat ngu:
1) Will they, because it is an ohmic load, just heat with 2 x 1,5KW?
2) It will shut off?
Best regards
Reinhard
Horst Dieter Preschel:
Thank you for the important citation; I endorse it,
Warm Regards,
A.R.
Aldo Greco:
The attendance, for security reasons, will be very limited and restricted to persons professionally involved in our industrial and commercial activity; the public will assist through the streaming that will cover the whole event,
Warm Regards,
A.R.
Wilfried:
No, because his would be very dangerous: it would result in severed assistance and guarantees by the manufacturer, should you manipulate his systems.
Only a manufacturer can adopt our system, integrating it in his ones.
Warm Regards,
A.R.
Dear Andrea,
would you, or the Leonardo Corporation, accept a private order to equip the VW ID Buzz GTX long version (or any vehicle) with E-Cat and adapt it to the battery system? Or do you insist that the manufacturer must do this?
Best Regards
Wilfried
Egregio ing. Rossi
volendo organizzarmi per la demo di ottobre quando pensa potrà comunicare i relativi riferimenti (luogo, tempi, durata etc) ?
@Jan Šrajer
If you have not already done so, you should take a look at the following pages
https://ingandrearossi.net/
Kind regards
Dieter
Wilfried:
1- Basically yes, with some adjustments for the specific situations
2- I do not understand what do you mean: can you rephrase ?
Warm Regards,
A.R.
Steven Nicholes Karels:
1. yes
2. yes
3. this is a date we will give the day of the event,
Warm Regards,
A.R.
Dear Andrea Rossi,
For the EV demonstration:
1. Will the same track used (the one in Italy, as I recall)?
2. Will same cars be used (same manufacturer, same model)?
3. What speeds do expect to achieve?
Dear Andrea,
Are the new electronics for adapting the E-Cat to the car battery designed in such a way that it can be easily or even automatically adapted to other vehicle-battery combinations?
Would they accept a customization as an order?
I still want a VW i-buzz gtx long version with E-Cat technology.
Best Regards
Wilfried
Jan Srajer:
After I will complete my work, maybe I will follow your suggestion. Now I do not have time.
Thank you for your suggestion, though,
Warm Regards,
A.R.
Mr.Rossi
True, this blog is such a memory, but far more significant are the memories of life as a whole. I’d say it’s about time someone wrote your life experiences: Where did you grow up, where did you go to school, who are your friends and enemies and finally how did you come up with the idea that led to the production of the E-cat. After all, your life, from the point of view of an ordinary reader, resembles one big adventure.
All the Best J.Š.
Jan Srajer:
Too soon, but, perhaps, this very blog is de facto my memoirs
Warm Regards,
A.R.
Mr.Rossi
Please, could you or someone close to you write your memoirs?
All the Best J.Š
Jean Paul Renoir:
Yes,
Warm Regards,
A.R.
Dr Rossi,
In the demo of the Ecat powered EV, will there be an independent expert of the car manufacturer to certify the genuinity of the cars original batteries ?
Jitse:
Probably,
Warm Regards,
A.R.
Dear Andrea Rossi,
Does it mean that the Ecat 100 Watt will also be presented in October?
Kind regards, Jitse
Frank Acland:
Yes, after a long and very hard work our Team did it,
Warm Regards,
A.R.
Dear Andrea,
This post on X today – https://twitter.com/LeonardoCorpor3/status/1814999793636147354 – states that you will do the EV demonstration in October.
Does this mean that you are confident you have resolved all the issues surrounding charging an EV with the E-Cat NGU?
Best wishes,
Frank Acland
Hunter:
Yes,
Warm Regards,
A.R.
Will the demo of the E-Cat powered EV be made with two EVs, one powered by the Ecat , the other only with the original battery, at the same speed to see if the Ecat powered lasts more ?
Peter Bees,
An interesting post. One correction – 4 100W NGU units, connected in series, will produce 48 VDC at 400 Watts. Instead of a simple control device, one could use a diode bridge that accepts both inputs: one input from the solar panel; and the other input from the NGU units; and outputs whichever input has the highest voltage. In this conceptual system, the solar panel would likely provide the 400W/450 Watts around local noon time. All other times would be the NGU units.
You might also consider using only 3 NGU units in series, to save costs, to get more time that the solar panel is producing the greater power.
Peter Bees:
You made a good point.
Anyway, particular custom assemblies will be discussed when we will be ready to deliver. In general, any kind of assembly can be contained in a box similar to the one shown in
http://www.ecat.com
Warm Regards,
A.R.
Dear Andrea Rossi,
I wonder if four E-Cat SKLep NGU devices were assembled in a case and installed as a ‘backpack’ for a typical 400/450W solar panel (in a pass-through style, like an optimizer), could they provide 100W of continuous electrical power at 48V? Additionally, with a simple control electronics, could they activate when the voltage produced by the panel ceases, as normally occurs at sunset or due to any other issue. Of course, the cost impact per panel would be significant; however, on an industrial scale, the cost could be significantly reduced, ensuring widespread adoption comparable to that of photovoltaic systems, of which this would become an important integration, transforming them into 24-hour production systems. Such an installation, for example, composed of 10/12 panels, thus a small system, would make available 1KW/1.2KW of power even in the absence of sunlight… I think it would be fantastic.