I would like to inform you that Frank Acland’s website, [https://www.e-catworld.com](https://www.e-catworld.com), has been almost inaccessible for days. It is even more difficult to reach than websites like RT.com (Russia Today).
This started after the demonstration of the E-Cat SKLep NGU in combination with the Twizzy. Before that, I never encountered any issues.
Nevertheless, today I managed to briefly watch the Skype interview between Andrea Rossi and Frank Acland, where Andrea clearly mentioned that we all need to spread the world-important news through word-of-mouth recommendations.
I deliberately neglect my own social media, as I prefer to gain connections and clients through personal recommendations from satisfied partners. Still, I immediately shared the videos of the LATINA demonstration on my FB page. Within the first few minutes, I received two “likes,” but many other people I know usually watch haven’t reacted. I suspect that even here, visibility is deliberately hindered by algorithms.
Hence, my suggestion here on JONP is for every enthusiast to share the videos themselves and perhaps check if they are getting fewer responses than usual.
Our word-of-mouth marketing is less effective if the people we speak to cannot find the correct sources and, when searching for “ECAT,” only land on so-called “Skeptics” who extensively explain why Pons and Fleischman only occasionally and very irregularly achieved bursts of cold fusion. The trend continues to suggest that cold fusion is something long sought after, but with no real success so far. Many people lose interest and move on to the next video about cute kittens.
Calle H:
Thank you for this question: the dimensions of the module are fixed, for the assemblies depend on the situation and the optional.
Warm Regards,
A.R.
Dear Dr. Rossi,
The NGU data sheet gives information on the size of the 10W unit. diameter 60 mm, height 30 mm.
For the NGU 100W unit what would be the typical size. A cylinder with diameter? and height? Or will it be a box with W? x L? x H?. Thank you if you can answer.
Kind Regards,
Calle H
Quando la fisica ufficiale, quella dei grandi accademici, ci spiegherà il mistero della “INVENZIONE IMPOSSIBILE”?????
Noi attendiamo risposte che ci sono dovute da anni,
Grazie per tutto ciò che hai fatto.
Gian
Dear Andrea,
first of all congratulations for the brilliant test of Latina. Reading your comments in this blog one thing is clear and evident, who is NGU, never give up, is Andrea Rossi, the Ecat is only by reflection.
Congratulations. Giuseppe
the 100W E-Cat is assembled of ten 10W E-Cats in parallel. Would it be possible to get a version of ten E-Cats in serial connection? Is there a plan to make the 10W E-Cat available for ordering too ?
Grazie Axil. Di difficile comprensione ma, per quanto ho potuto, mi pare che il contributo di A.R. E del suo Team alla comprensione del fenomeno sarà considerevole
English: I understand from your comment that the work of Rossi and his Team give also a theoretical help to understand the mechanisms of this effect.
Both the measured power density of both Zero Point Energy and vacuum energy are far too weak to produce even 10 watts of electrical power let alone 3 Kw of power.
The best candidate for extracting energy from the vacuum seems to be vacuum decay,
The theory of vacuum decay, specifically the concept of a “false vacuum” which can decay into a true vacuum state, first emerged in the late 1970s, with key developments related to the electroweak interaction and the Higgs field, particularly in the work of physicists studying the stability criteria for these forces based on particle masses like the top quark and Higgs boson.
Key points about the timeline of vacuum decay theory:
Early development:
The foundational ideas related to quantum field theory and vacuum states were established in the early to mid-20th century, laying the groundwork for the concept of a “false vacuum.”
Formalization of “false vacuum”:
The stability criteria for the electroweak interaction, which is often considered the most likely candidate for a metastable “false vacuum,” were first formulated in the late 1970s. The concept of a “false vacuum” is central to vacuum decay, where the current vacuum state is considered locally stable but not the absolute lowest energy state, allowing for a potential transition to a more stable “true vacuum”.
Experimental verification:
The discovery of the Higgs boson in 2012 provided crucial experimental evidence supporting the possibility of a false vacuum in the electroweak interaction.
Recent advancements:
Recent experiments have produced what is considered the first experimental evidence of “false vacuum decay” by observing bubble formation in carefully controlled atomic systems, further validating the theory.
The theory of vacuum decay is primarily based on the field of quantum field theory within physics, as it describes the behavior of the vacuum state at the quantum level and the potential for transitions between different energy states, including a hypothetical “false vacuum” that could decay into a more stable state.
Key points about vacuum decay and quantum field theory:
Cosmological implications:
Vacuum decay is often discussed in the context of cosmology since it has a determinative impact on early universe big bang processes and mechanisms, as it could have significant implications for the universe’s origin, the way that the universe first evolved, and its ultimate fate.
Going forward, Dr. Rossi is destine to make a groundbreaking contribution to quantum field theory as well as many other fields of scientific study when science is able to expand on Dr. Rossi’s work and integrate his seminal work into quantum field theory and particle physics.
Dr Rossi, it is impressive the increase of total readings of your papers published onResearchgate http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Surely this is due to the videos on the Leonardo Corporation youtube channels of the 2 EV cars competition, but I think it is also due to the fact that this paper in particular teaches how to replicate the effect.
It is a game changer, above any possible doubt.
Best
Giulia Manfredini
Dr. Rossi builds a bubble of the vacuum that is different in its power from the vacuum of our universe. This bubble will grow on its own by sucking in energy from around itself until it gets to a size that is unstable. This bubble will then explode whereupon the exploding bubble will produce energy that it has absorbed that Dr Rossi can use to produce electrical power.
See an explanation of the complicated science behind this hypothesis:
Willelm Van Ouystel:
It is difficult to answer, because the curves of the numbers oscillate with high energy along the integral dO/dT ( orders in function of time ), and this is why: it is not rare the case of pre-orders for meganumbers, followed by a brutal fall when we make a due diligence on the guys who made that preorders and discover that their company is an empty box. This is why it would not be serious to answer this question before the target is reached. When ? I am not able to answer, but I hope soon: after the Latina demonstration we had extremely important contacts with which we are presently dealing.
Warm Regards,
A.R.
Dan Galburt,
I suspect that our clients are not interested to this log.
They need only to know that the Ecat must have a power equal or minor than the power demanded by the load, whatever it is. All the rest will be managed by the Ecat, as it happens with any electricity generator, DC or AC as it might be.
All the Clients want to know is how much is the power necessary to their load and its Voltage.
To make all simpler: if the user needs to activate anything that needs a max power of e.g. 100 W, he needs a 100 W Ecat. That’s what counts for the Client.
About your question: the Amperes will have a value along the Ohm’s equation A=V/R and W = A x V; consequently, W/V= A
This way, as I am sure you know, any Client, that will have a compulsive need to know how many Amperes is discharging his generator, will be able to know exactly using these equations…albeit I suspect that they won’t give a damn about these equations, disappointing to Ohm as this might be.
Remains to answer the last case I was forgetting: when you shut down the Ecat, A and V will drop to zero and the load will cry, whatever the Power (W), that remains what it is, but jobless: no Wh/h, no job.
Warm Regards,
A.R.
P.S. I know you are intelligent of the matter, so I am laughing with you, not at you. Let me take some rest during these extremely pressing days.
When I am discussing the E-Cat SKL-NGU-10W, I will refer to it simply as E-Cat.
I would like to discuss a simple system consisting of an E-Cat connected to a load resistor.
Based upon your spec sheet I generated the following table of the E-Cat’s response to different values of load resistor.
Since there are no manual or remote adjustments the E-Cat should have a unique response for each value of load resistor.
R – Ohms E-cat – Status Power – Watts Voltage – Volts Current – Amps
0.05 OFF 0 0 0
0.1 ON 10 1.0 10.0
0.2 ON 10 1.414 7.071
1.0 ON 10 3.162 3.162
10.0 ON 10 10.0 1.0
14.4 ON 10 12.0 0.833
20.0 ? ? ? ?
Please correct any errors you see, and fill out the row that has question marks.
I believe there is confusion as to how the E-Cat responds to different values of load resistance, and I don’t see how having a corrected table like this would give away any confidential information. The more confident customers are with how to interface with an E-Cat the more likely it is they will make a pre-order.
Dear Dr Rossi,
It was communicated that you/Leonardo Corp will only start full scale production if you reach 1 million pre-oders of 100W ECat SKlep, right? At this moment, October 15 2024, where are you at when it come to pre-orders? How many are in, and when do you expect to reach 1 million.
Kind Regards
Mr. Rossi
I look forward to demonstrating the heat radiator with E-cat. There could already be journalists you would invite from different corners of the world.
All the best J.Š.
Dr Rossi,
Today I found the new stats of your papers on http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_particle_interactions
Total Readings: 151000, of which 138560 only for “Ecat SK and Long Range Particle Interactions” more than 1.5 million publications on Researchgate
Total Recommendations: 11882, more than 1.5 million publications on Researchgate
Research Interest Score: 3065, more than 1.5 million publications on Researchgate
And counting…
Prof
Dear Dr Rossi,
E-Cat is a very important technological innovation and it needs media coverage for a smooth launch.
1) That’s why I ask You: Will the planned demo/test with the photovoltaic system be carried out in the presence of a larger number of journalists and media?
2) If NO, are You planning any kind of demo at all with the presence of more journalists and media?
Thanks to you and your team for a most excellent demonstration of the e-cat powered electrical vehicle!
I noticed that the Niagara Falls seems to have been a major ingredient leading you to the discovery.
Curiously, I found the following interview with Nikola Tesla, where he’s also mentioning the Niagara Falls:
JOURNALIST: Tell me, please, what conditions does an Angel adopt on Earth?
TESLA: I have ten of them. I keep a good watchful record.
JOURNALIST: I’ll document all your words, dear Mr. Tesla.
TESLA: The first requirement is a high awareness of your mission and the work to be done. It must, albeit only vaguely, exist in the first few days. Let us not be falsely modest: The oak knows that it is an oak tree, a shrub beside it which is a shrub. When he was twelve, he was certain he would reach Niagara Falls. I knew from my childhood that I would get most of my discoveries, although I was not entirely clear … The second condition to adapt is determination. All I could, I finished it.
I have activated company Intelligent Technologies Inc., by placing financial assets into the company. To see my linkedin page (google gene quong linkedin). I am currently trying to build my network
by connecting with Engineers who are working. I have been following your work since 2010. My advice to everyone is to buy, because I believe that eCat NGU’s work. Since we had
two blackouts in May, 2024 in Burnaby, BC. I have already created a backup system with 7.92 Kilowatt in batteries and 1000 watts of solar panels. I am currently testing a 2000 Watt Inverted 12 VDC
to 110 VAC that I bought using my business account at Amazon. The main purpose of my connecting to as many Engineers as possible is to promote your product. Since I ordered 3 eCAts on January 2022,
and one on April 2022, I am very eager to get my units. When I get these units they will provide the energy to ensure that I have backup power for a very long time.
Nicola Volpe:
No, the issue is much more complex, as the batterie of the EVs have a much more complex BMS.
Warm Regards,
A.R.
P.S. Your comment is the N. 68000 of this blog
Hi mr. Rossi
judging by the test result, since your Ecat can power the vehicle with a positive balance (having also recharged the battery during the test), it would be more than sufficient to have a small buffer battery (1..2kWh), necessary for peaks absorption, which could be integrated into the vehicle system. I believe the cost of the system would be equivalent to the battery alone. What do you think? Has anyone thought about this? Congratulations anyway
Tobias:
When the Ecat is disconnected from a load it automatically shuts down. The Ecat has a switch, obviously.
Besides, the fact that the Ecat needs an instrument to disconnect is true for batteries that do not have a BMS.
Warm Regards,
A.R.
Tobias:
When the Ecat has to charge a battery it is necessary to apply an instrument that disconnects the connection between the battery and the Ecat when the battery is completely recharged. For this specific application, that has to be declared to us from the Client before we deliver, because without this interface the battery can explode.
Warm Regards,
A.R.
———–
So eCat keeps running power through connected wires, if no wires are connected it does not produce energy? or where does the energy go?
The unusual request of a 13-volt output is driven by the desire to employ a number of 100W NGU units in series to feed the PV input of an EG4 6000XP solar inverter. The EG4 specs indicate a startup voltage of 100VDC +/- 10VDC and the MPP starts at 120VDC. I am concerned the MPP (which dynamically changes the load slightly to track the best power production Voltage and Amperage point) would trigger an NGU unit shutdown if overcurrent occurred. So, there is a “sweet zone” between 110VDC and 120VDC. By selecting an output between 110VDC and 120VDC, I could avoid the potential problem.
The “best” solution would be a 13VDC output from the NGU units. 9 x 13VDC = 117VDC.
Another possibility is adding a diode with a 0.6 voltage drop in series with each 12VDC NGU unit. 10 such units in series would produce 120VDC – 6VDC = 114VDC. Each diode would have to dissipate about 5 Watts of power.
Or, replace the diode with a resistor. For a 0.5VDC drop and a current of 8.33 Amps we would need a resistance of 0.06 Oms and a power dissipation of 5 or 10 W. This would yield a voltage at the EG4 input of 115VDC.
Steven Nicholes Karels:
1- to modify the modules to make 13 V instead of 12 is possible, but it should be a custom manufacturing, that would cost: yoi can resolve easily the problem putting in series one more module followed by a resistance to reduce the excess of voltage: this “home made” solution will cost you much less
2- see 1
Warm Regards,
A.R.
Rik: thank you for your kind support.
Answers to the 2 questions:
1- the explosion happened for an error in the interface between the Ecat and the battery of the Twizy; we made an R&D dedicated soecifically to this problem, then we made tests to arrive to
Sigma 5
2- yes
3- go to http://www.ecat.com:there is the photo
Warm Regards,
A.R.
Dear Enthousiasts,
I would like to inform you that Frank Acland’s website, [https://www.e-catworld.com](https://www.e-catworld.com), has been almost inaccessible for days. It is even more difficult to reach than websites like RT.com (Russia Today).
This started after the demonstration of the E-Cat SKLep NGU in combination with the Twizzy. Before that, I never encountered any issues.
Nevertheless, today I managed to briefly watch the Skype interview between Andrea Rossi and Frank Acland, where Andrea clearly mentioned that we all need to spread the world-important news through word-of-mouth recommendations.
I deliberately neglect my own social media, as I prefer to gain connections and clients through personal recommendations from satisfied partners. Still, I immediately shared the videos of the LATINA demonstration on my FB page. Within the first few minutes, I received two “likes,” but many other people I know usually watch haven’t reacted. I suspect that even here, visibility is deliberately hindered by algorithms.
Hence, my suggestion here on JONP is for every enthusiast to share the videos themselves and perhaps check if they are getting fewer responses than usual.
Our word-of-mouth marketing is less effective if the people we speak to cannot find the correct sources and, when searching for “ECAT,” only land on so-called “Skeptics” who extensively explain why Pons and Fleischman only occasionally and very irregularly achieved bursts of cold fusion. The trend continues to suggest that cold fusion is something long sought after, but with no real success so far. Many people lose interest and move on to the next video about cute kittens.
Spread the word!
Koen
Frank Acland:
Thank you for the link,
Warm Regards,
A.R.
Gian:
Thank you for your support,
Warm Regards,
A.R.
Calle H:
Thank you for this question: the dimensions of the module are fixed, for the assemblies depend on the situation and the optional.
Warm Regards,
A.R.
Rik:
What do you mean ? Can you rephrase ?
Warm Regards,
A.R.
Can you share lithium lifepo4 batteries? with the 100w
Dear Dr. Rossi,
The NGU data sheet gives information on the size of the 10W unit. diameter 60 mm, height 30 mm.
For the NGU 100W unit what would be the typical size. A cylinder with diameter? and height? Or will it be a box with W? x L? x H?. Thank you if you can answer.
Kind Regards,
Calle H
Interview with Andrea Rossi, October 15, 2024
https://www.youtube.com/watch?v=Y9JH2S9Cgqo
Quando la fisica ufficiale, quella dei grandi accademici, ci spiegherà il mistero della “INVENZIONE IMPOSSIBILE”?????
Noi attendiamo risposte che ci sono dovute da anni,
Grazie per tutto ciò che hai fatto.
Gian
Dear Andrea,
Thank you for taking the time for an interview yesterday. Here is the published video:
https://youtu.be/Y9JH2S9Cgqo?si=AtHGhGml-HmK_vqJ
Kind regards,
Frank Acland
Andreas Maurer:
Yes, the Ecats can be assembled in series and in parallel,
Warm Regards,
A.R.
Giuseppe Censorio:
Let me correct you: the Ecat is the reflection of our great Team,
Warm Regards,
A.R.
Dear Andrea,
first of all congratulations for the brilliant test of Latina. Reading your comments in this blog one thing is clear and evident, who is NGU, never give up, is Andrea Rossi, the Ecat is only by reflection.
Congratulations. Giuseppe
Dear Andrea,
the 100W E-Cat is assembled of ten 10W E-Cats in parallel. Would it be possible to get a version of ten E-Cats in serial connection? Is there a plan to make the 10W E-Cat available for ordering too ?
Warm regards,
Andreas
Pierre:
Thank you for your support,
Warm Regards,
A.R.
Giulia:
Thank you for your attention to the work of our Team,
Warm Regards,
A.R.
Grazie Axil. Di difficile comprensione ma, per quanto ho potuto, mi pare che il contributo di A.R. E del suo Team alla comprensione del fenomeno sarà considerevole
English: I understand from your comment that the work of Rossi and his Team give also a theoretical help to understand the mechanisms of this effect.
Both the measured power density of both Zero Point Energy and vacuum energy are far too weak to produce even 10 watts of electrical power let alone 3 Kw of power.
The best candidate for extracting energy from the vacuum seems to be vacuum decay,
The theory of vacuum decay, specifically the concept of a “false vacuum” which can decay into a true vacuum state, first emerged in the late 1970s, with key developments related to the electroweak interaction and the Higgs field, particularly in the work of physicists studying the stability criteria for these forces based on particle masses like the top quark and Higgs boson.
Key points about the timeline of vacuum decay theory:
Early development:
The foundational ideas related to quantum field theory and vacuum states were established in the early to mid-20th century, laying the groundwork for the concept of a “false vacuum.”
Formalization of “false vacuum”:
The stability criteria for the electroweak interaction, which is often considered the most likely candidate for a metastable “false vacuum,” were first formulated in the late 1970s. The concept of a “false vacuum” is central to vacuum decay, where the current vacuum state is considered locally stable but not the absolute lowest energy state, allowing for a potential transition to a more stable “true vacuum”.
Experimental verification:
The discovery of the Higgs boson in 2012 provided crucial experimental evidence supporting the possibility of a false vacuum in the electroweak interaction.
Recent advancements:
Recent experiments have produced what is considered the first experimental evidence of “false vacuum decay” by observing bubble formation in carefully controlled atomic systems, further validating the theory.
The theory of vacuum decay is primarily based on the field of quantum field theory within physics, as it describes the behavior of the vacuum state at the quantum level and the potential for transitions between different energy states, including a hypothetical “false vacuum” that could decay into a more stable state.
Key points about vacuum decay and quantum field theory:
Cosmological implications:
Vacuum decay is often discussed in the context of cosmology since it has a determinative impact on early universe big bang processes and mechanisms, as it could have significant implications for the universe’s origin, the way that the universe first evolved, and its ultimate fate.
Going forward, Dr. Rossi is destine to make a groundbreaking contribution to quantum field theory as well as many other fields of scientific study when science is able to expand on Dr. Rossi’s work and integrate his seminal work into quantum field theory and particle physics.
Dr Rossi, it is impressive the increase of total readings of your papers published onResearchgate
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Surely this is due to the videos on the Leonardo Corporation youtube channels of the 2 EV cars competition, but I think it is also due to the fact that this paper in particular teaches how to replicate the effect.
It is a game changer, above any possible doubt.
Best
Giulia Manfredini
Dr Rossi,
We all are hoping your deals born after the Latina EV test will shorten the time to deliver
This would be great,
Good Luck,
Pierre
Dr. Rossi builds a bubble of the vacuum that is different in its power from the vacuum of our universe. This bubble will grow on its own by sucking in energy from around itself until it gets to a size that is unstable. This bubble will then explode whereupon the exploding bubble will produce energy that it has absorbed that Dr Rossi can use to produce electrical power.
See an explanation of the complicated science behind this hypothesis:
https://www.youtube.com/watch?v=gc4pxTjii9c
Willelm Van Ouystel:
It is difficult to answer, because the curves of the numbers oscillate with high energy along the integral dO/dT ( orders in function of time ), and this is why: it is not rare the case of pre-orders for meganumbers, followed by a brutal fall when we make a due diligence on the guys who made that preorders and discover that their company is an empty box. This is why it would not be serious to answer this question before the target is reached. When ? I am not able to answer, but I hope soon: after the Latina demonstration we had extremely important contacts with which we are presently dealing.
Warm Regards,
A.R.
Dan Galburt,
I suspect that our clients are not interested to this log.
They need only to know that the Ecat must have a power equal or minor than the power demanded by the load, whatever it is. All the rest will be managed by the Ecat, as it happens with any electricity generator, DC or AC as it might be.
All the Clients want to know is how much is the power necessary to their load and its Voltage.
To make all simpler: if the user needs to activate anything that needs a max power of e.g. 100 W, he needs a 100 W Ecat. That’s what counts for the Client.
About your question: the Amperes will have a value along the Ohm’s equation A=V/R and W = A x V; consequently, W/V= A
This way, as I am sure you know, any Client, that will have a compulsive need to know how many Amperes is discharging his generator, will be able to know exactly using these equations…albeit I suspect that they won’t give a damn about these equations, disappointing to Ohm as this might be.
Remains to answer the last case I was forgetting: when you shut down the Ecat, A and V will drop to zero and the load will cry, whatever the Power (W), that remains what it is, but jobless: no Wh/h, no job.
Warm Regards,
A.R.
P.S. I know you are intelligent of the matter, so I am laughing with you, not at you. Let me take some rest during these extremely pressing days.
Dear Larry G,
moreless yes,
Best,
Prof
Hi Prof….
So there has been about ten fold or more increase in read rate for “Ecat SK and Long Range Particle Interactions” since the EV demo?
LarryG
Dear Dr. Rossi,
When I am discussing the E-Cat SKL-NGU-10W, I will refer to it simply as E-Cat.
I would like to discuss a simple system consisting of an E-Cat connected to a load resistor.
Based upon your spec sheet I generated the following table of the E-Cat’s response to different values of load resistor.
Since there are no manual or remote adjustments the E-Cat should have a unique response for each value of load resistor.
R – Ohms E-cat – Status Power – Watts Voltage – Volts Current – Amps
0.05 OFF 0 0 0
0.1 ON 10 1.0 10.0
0.2 ON 10 1.414 7.071
1.0 ON 10 3.162 3.162
10.0 ON 10 10.0 1.0
14.4 ON 10 12.0 0.833
20.0 ? ? ? ?
Please correct any errors you see, and fill out the row that has question marks.
I believe there is confusion as to how the E-Cat responds to different values of load resistance, and I don’t see how having a corrected table like this would give away any confidential information. The more confident customers are with how to interface with an E-Cat the more likely it is they will make a pre-order.
Best Regards,
Dan Galburt
Dear Dr Rossi,
It was communicated that you/Leonardo Corp will only start full scale production if you reach 1 million pre-oders of 100W ECat SKlep, right? At this moment, October 15 2024, where are you at when it come to pre-orders? How many are in, and when do you expect to reach 1 million.
Kind Regards
Adam Roy:
Yes, when we will launch the Ecat ready to be delivered to our Ecat.
Now it is premature.
Warm Regards,
A.R.
Mattias Andersson:
Thank you for this interwiew.
Very interesting…
Warm Regards,
A.R.
Gavino Mamia:
No,
Warm Regards,
A.R.
Prof:
Thank you for the update,
Warm Regards,
A.R.
Jan Srajer:
Thank you,
Warm Regards,
A.R.
Mr. Rossi
I look forward to demonstrating the heat radiator with E-cat. There could already be journalists you would invite from different corners of the world.
All the best J.Š.
Dr Rossi,
Today I found the new stats of your papers on http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_particle_interactions
Total Readings: 151000, of which 138560 only for “Ecat SK and Long Range Particle Interactions” more than 1.5 million publications on Researchgate
Total Recommendations: 11882, more than 1.5 million publications on Researchgate
Research Interest Score: 3065, more than 1.5 million publications on Researchgate
And counting…
Prof
Dr. Rossi, has this company faced the same problems you have faced?
https://youtu.be/2Sp8Ckev3eo?si=28rLZimJLCB0_Zkn
Dear Dr Rossi,
E-Cat is a very important technological innovation and it needs media coverage for a smooth launch.
1) That’s why I ask You: Will the planned demo/test with the photovoltaic system be carried out in the presence of a larger number of journalists and media?
2) If NO, are You planning any kind of demo at all with the presence of more journalists and media?
Thanks and Best Regards
Adam Roy
Dear Andrea,
Thanks to you and your team for a most excellent demonstration of the e-cat powered electrical vehicle!
I noticed that the Niagara Falls seems to have been a major ingredient leading you to the discovery.
Curiously, I found the following interview with Nikola Tesla, where he’s also mentioning the Niagara Falls:
JOURNALIST: Tell me, please, what conditions does an Angel adopt on Earth?
TESLA: I have ten of them. I keep a good watchful record.
JOURNALIST: I’ll document all your words, dear Mr. Tesla.
TESLA: The first requirement is a high awareness of your mission and the work to be done. It must, albeit only vaguely, exist in the first few days. Let us not be falsely modest: The oak knows that it is an oak tree, a shrub beside it which is a shrub. When he was twelve, he was certain he would reach Niagara Falls. I knew from my childhood that I would get most of my discoveries, although I was not entirely clear … The second condition to adapt is determination. All I could, I finished it.
Gene Quong:
Thank you for your support,
Warm Regards,
A.R.
I have activated company Intelligent Technologies Inc., by placing financial assets into the company. To see my linkedin page (google gene quong linkedin). I am currently trying to build my network
by connecting with Engineers who are working. I have been following your work since 2010. My advice to everyone is to buy, because I believe that eCat NGU’s work. Since we had
two blackouts in May, 2024 in Burnaby, BC. I have already created a backup system with 7.92 Kilowatt in batteries and 1000 watts of solar panels. I am currently testing a 2000 Watt Inverted 12 VDC
to 110 VAC that I bought using my business account at Amazon. The main purpose of my connecting to as many Engineers as possible is to promote your product. Since I ordered 3 eCAts on January 2022,
and one on April 2022, I am very eager to get my units. When I get these units they will provide the energy to ensure that I have backup power for a very long time.
Nicola Volpe:
No, the issue is much more complex, as the batterie of the EVs have a much more complex BMS.
Warm Regards,
A.R.
P.S. Your comment is the N. 68000 of this blog
Hi mr. Rossi
judging by the test result, since your Ecat can power the vehicle with a positive balance (having also recharged the battery during the test), it would be more than sufficient to have a small buffer battery (1..2kWh), necessary for peaks absorption, which could be integrated into the vehicle system. I believe the cost of the system would be equivalent to the battery alone. What do you think? Has anyone thought about this? Congratulations anyway
Steven Nicholes Karels:
I confirm the answer I already gave you,
Warm Regards,
A.R.
Tobias:
When the Ecat is disconnected from a load it automatically shuts down. The Ecat has a switch, obviously.
Besides, the fact that the Ecat needs an instrument to disconnect is true for batteries that do not have a BMS.
Warm Regards,
A.R.
@Arjen,
Leonardo Corporation does have an active X account at https://x.com/Leonardocorpor3
Best wishes,
Frank Acland
Tobias:
When the Ecat has to charge a battery it is necessary to apply an instrument that disconnects the connection between the battery and the Ecat when the battery is completely recharged. For this specific application, that has to be declared to us from the Client before we deliver, because without this interface the battery can explode.
Warm Regards,
A.R.
———–
So eCat keeps running power through connected wires, if no wires are connected it does not produce energy? or where does the energy go?
Can the ECat be turned off?
Dear Andrea Rossi,
The unusual request of a 13-volt output is driven by the desire to employ a number of 100W NGU units in series to feed the PV input of an EG4 6000XP solar inverter. The EG4 specs indicate a startup voltage of 100VDC +/- 10VDC and the MPP starts at 120VDC. I am concerned the MPP (which dynamically changes the load slightly to track the best power production Voltage and Amperage point) would trigger an NGU unit shutdown if overcurrent occurred. So, there is a “sweet zone” between 110VDC and 120VDC. By selecting an output between 110VDC and 120VDC, I could avoid the potential problem.
The “best” solution would be a 13VDC output from the NGU units. 9 x 13VDC = 117VDC.
Another possibility is adding a diode with a 0.6 voltage drop in series with each 12VDC NGU unit. 10 such units in series would produce 120VDC – 6VDC = 114VDC. Each diode would have to dissipate about 5 Watts of power.
Or, replace the diode with a resistor. For a 0.5VDC drop and a current of 8.33 Amps we would need a resistance of 0.06 Oms and a power dissipation of 5 or 10 W. This would yield a voltage at the EG4 input of 115VDC.
Steven Nicholes Karels:
1- to modify the modules to make 13 V instead of 12 is possible, but it should be a custom manufacturing, that would cost: yoi can resolve easily the problem putting in series one more module followed by a resistance to reduce the excess of voltage: this “home made” solution will cost you much less
2- see 1
Warm Regards,
A.R.
Gavino Mamia:
Thank you for the links. Yes, I know them,
Warm Regards,
A.R.
Calle H:
Correct.
Warm Regards,
A.R.
Rik: thank you for your kind support.
Answers to the 2 questions:
1- the explosion happened for an error in the interface between the Ecat and the battery of the Twizy; we made an R&D dedicated soecifically to this problem, then we made tests to arrive to
Sigma 5
2- yes
3- go to http://www.ecat.com:there is the photo
Warm Regards,
A.R.
Arjen:
Thank you for your suggestion,
Warm Regards,
A.R.