Dear Andrea,
I saw this national news of the USA this morning. You are getting the international recognition you deserve for this needed product for society:
“SUBJECT:EV with ‘unlimited? range tested, car battery’s energy increases as it travels more”. https://l.smartnews.com/p-C77Xr/geuQgJ
Warm Regards,
Craig
Hello Doctor Rossi
It is considered that the earth connection of an installation must be less than 5 Homs. However, most aging installations far exceed this value.
Your invention requires earthing.
Can you tell me what is the maximum resistance required for the earth connection for the E-cat to operate correctly?
What happens if the resistance exceeds the maximum value?
Kind regards
Raffaele
Mr.Rossi
Let me describe your invention based on your theoretical work. Please don’t make it public if you don’t want to.
E-cat is a resonant vacuum chamber with a little argon. Nickel and lithium is deposited on the resonant line in the chamber and is subjected to a magnetic flux through the winding. As a result, the chamber lights up, an electric field is created and it is possible to draw an electric current. The plasma generator oscillates in the THz range and draws energy from the vacuum via Argon.
Prof:
Thank you for the update; actually we all are stunned for this unbelievable increase of interest in our theoretical work, although the demonstration of the race between the two Renault cars with one of them powered by the Ecat is an experiment that reinforces strongly the theory described in the paper http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Warm Regards,
A.R.
Yet another NGU Application – Battery Trickle Charger
A smart battery trickle charger permanently installed in a non-NGU equipped vehicle – motorcycle, car, truck, or boat. It will charge and maintain the 6V, 12V, or 24V battery, while automatically sensing ambient temperature to avoid undercharging or overcharging. Powered by a single NGU 10W unit, it slowly charges a partially or fully discharged battery. No need to plug into an AC socket for power.
Dr Rossi,
Here are the stunning stats of your papers I found today on http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 154620 ( of which 141428 only for “Ecat SK and Long Range Particle Interactions” ), about 1000 more than yesterday and more than the 100% of 1.5 million publications on Researchgate.
After the demonstration of the Renault Twizy powered by the Ecat the readings, also the Recommendations and the Research Interest Score have increased exponentially…and counting
Prof
Dear Camillo and Readers,
considering the link: https://gradientitemporali.wordpress.com/2024/10/18/il-potere-dell-e-cat/ very interesting and exhaustive, I thought it appropriate to turn it over to the editorial offices of the following newspapers:
Corriere della Sera – Repubblica – La Stampa – Il Fatto Quotidiano – Domani – New Your Times, Associated Press, The Time….etc, etc adding the links to the videos of Youtube,
… inviting them – after having researched – to decide whether it was appropriate to inform their readers about the content of the proposed document.
Cesare
Do you permit me to insist on the proposal to fly a toy drone?
It doesn’t matter which cheap toy drone you would buy (10-30 Watt). While it would normally fly between 10 and 20 minutes… you could let it fly for many days. I believe this is just a very simple setup, made in day. So very convincing, it would blow everyone away, just as proof of concept of your reactor! I believe orders will flood in!
I find it astonishing that at the end of almost 20 years of testing it presents discoveries, various emotions… in the end a “little ant” of just 10 W emerges which becomes the basic building block. With this brick for subsequent aggregations we start and we will see where we arrive. So a small vacuum tube with “xenon” gas inside is induced to emit an electric current at the ends if I understand correctly. I suppose there are random electric discharges of variable INSTANTANEOUS power… the declared power is therefore only the average. I used Xenon lamps in my fifth year of school, I remember that the light they gave off was similar to sunlight and allowed us to evaluate whether the color we had put in the fabric was similar or the same as the sample. (I am a dyer chemist, then a graduate in electronic physics). The Xenon lamp is strongly ionizing and poisonous Ozone is created in such quantities that one could only remain for short periods with the lamp turned on in a special, suitably ventilated environment. Now I wonder, in this E-Cat LED which is at the base there must also be a small battery that triggers it, which is then continuously recharged by the voltage generated itself. Is that so?
Are you sure we’re talking about the same drones? I mean a toy that can fly or hover about 13 minutes in the air: https://www.walmart.com/ip/DJI-Tello-Boost-Combo-Drone/809454862
The DJI Tello has a 3.8V 1100mAh (4.18Wh) battery. The average power consumption is about 10 Watt. So, if you buy such a drone ($150) today, it can already fly today when you connect 2 E-Cats! Instead of flying 13 minutes, it can keep on flying for years. Such a test is quickly done, within a day, is very cheap and is extremely convincing.
There are endless possibilities with the E-Cat-SKL-NGU. However, I understand the safety concerns of ‘Paul’.
Imagine that I install my home with a complete E-Cat-SKL-NGU-installation. Then I always need to be aware that I need a BMS for my car, my laptop, my rechargeable screwdriver… otherwise they could catch fire, isn’t it? I cannot imagine that charging an electric car with built-in E-Cats needs a BMS, while that same car doesn’t need a BMS when being charged by a wall socket that is powered by E-Cats? Can you assure that my neighbour can safely charge his regular electric car in my E-Cat-wall socket?
This might imply that it is not possible to develop an E-Cat power plant, because customers always need to be aware not to use the electric power for charging batteries… or am I wrong?
I’m still very impressed by your Twizzy-demonstration. I think another impressive demonstration can be done with a toy drone without batteries. Imagine that you keep it flying during days in front of the public! Then it is very hard to deny that the E-Cat SKLep NGU is real!
Of course you’ll need security people and a security net around the small flying area against theft. Automated hovering or flying a fixed pattern with a drone can be done with a program, so you don’t need an operator.
Dr Rossi has found over years of experimentation as typified when he developed the big 250kW reactors for industrial heat, that in only a very short amount of time, those big reactors failed because of corrosion. This failure of the structure of these powerful reactors was caused by transmutation of elements.
Transmutation is an inescapable result of the nature of the LENR reaction. Transmutations’ effects on matter are scaled to the power density that the reactor puts out. At very low power density, the reactor just affects isotopic makeup of the elements in the reactor structure. Matter that has an even atomic number is affected more than elements that have an odd isotope number. The LENR reaction is magnetic in its nature, Because of this, the magnetic force of the reaction more easily penetrates into the nucleus of the atom when the number of protons in the nucleus are even. In nuclear magnetic resonance (NMR), this feature is termed NMR active elements. Odd atomic elements are more resistant to transmutation than are even atomic number isotopes.
In more detail, an atomic nucleus is NMR-active if it has a non-zero nuclear spin quantum number (I), which means it can interact with external magnetic fields and produce EMF based signals in NMR. These signals weaken the energy that can penetrate into the nucleus of an element since the EMF signal remove energy from the total magnetic power value:
Nuclear spin quantum number
This quantum property is similar to an atom’s spin and characterizes the nucleus’s angular momentum.
Odd or even number of protons and neutrons
Nuclei with an odd number of protons and/or neutrons have a non-zero nuclear spin and are NMR-active. Nuclei with an even number of both protons and neutrons have a nuclear spin quantum number of zero and are not NMR-active which means that the magnetic field of the LENR reaction enters the nucleus of the element at full power.
Spin ½ nuclei or greater
These are the simplest to study and are commonly used in high resolution NMR studies since they produce strong EMF signals.
Spin quantum numbers of isotopes greater than ½
These are also common, but are also generally well-suited for use in reactor structures
Some examples of NMR-active nuclei that are not likely to produce transmutation include:
1H, the 1H isotope of hydrogen
13C, the 13C isotope of carbon
14N, the 14N isotope of nitrogen
19F
31P
As a result of all these considerations, there is a power density limit to the power that a LENR reactor can produce in order to keep transmutation in check during reactor operations. Dr. Rossi has found that this limit to be 10 watts of power. So a large LENR reactor must be composed of many 10 watt cores to keep the structure of a large reactor from disintegrating over time. Also, by using a large number of multiple small cores, enhanced availability results when any single core fails, its contribution to the large core aggregation is automatically compensated for by the aggregation of small cores.
Furthermore, the isotopes in the plasma are not affected by transmutation giving the low powered reactor core a maximum lifetime compared to a high powered reactor.
Dr Rossi,
Here are the stats of your publications on Researchgate found today on http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 140000, of which 153238 only for “Ecat SK and Long Range Particle Interactions”, the most read publication of 1.5 publications on Researchgate.
After your demo of Latina the readings had a strong increase.
And counting…
Prof
From the recent interview we understand that the application in the automotive field will be long-term and will necessarily involve some car manufacturing company. The application in photovoltaics seems closer and simpler. If I understand correctly, the symbiosis of your system with a photovoltaic system doubles its output. In practice we could say that if we had solar panels that went from a yield that we estimate at 25% (the latest ones have even more) with the addition of your new device they would go to 50%. An epochal revolution.
Dr.Rossi,
Do special safety measures need to be taken for e-cats installed at home?
I refer to the security measures taken in the electric car.
Kind Regards,
Paul
I am sorry. I mean is it possible to charge lithium lifeo4 batteries, since their voltage is a bit higher at around 13.4 V
Also: would there be any way to sell your products in third party websites?
We have a platform that focuses on wellness and sustainable products. Your product would be a perfect fit for our target audience.
I fully agree with Koen.
I also find the newly published whitepaper about E-Cat Power a good complement to the videos and quite useful for linking media and professionals.
It was very exiting and inspiring to watch your latest interview just shared on the E-Cat World youtube channel.
Thank you very much for sharing valuable information!
Last week I ordered another 10 x 100 W e-Cat NGU (I like the “NGU” – so true!)
Gentile A.R.
Ho appena ascoltato l’intervista rilasciata a Frank e sono curioso di sapere se, nei tuoi piani produttivi, ci sia anche l’Italia. Grazie
English: do you plan to distribute the Ecats also in Italy ?
Frank Acland:
The 10 W module can do that,
Warm Regards,
A.R.
Hi Craig !
I will never forget the years we worked together in New Hampshire.
Thank you for the link,
Warm Regards,
A.R.
Dear Andrea,
I saw this national news of the USA this morning. You are getting the international recognition you deserve for this needed product for society:
“SUBJECT:EV with ‘unlimited? range tested, car battery’s energy increases as it travels more”.
https://l.smartnews.com/p-C77Xr/geuQgJ
Warm Regards,
Craig
Dear Andrea,
I think a useful application for an NGU cell would be for charging USB devices such as mobile phones
In my car, I have a device like this plugged into my cigarette lighter 12 volt socket: https://www.walmart.com/ip/UGREEN-63W-USB-C-Car-Charger-Adapter-PPS-45W-Super-Fast-Charging-Car-Charger-Black/5496211815?classType=REGULAR&athbdg=L1600&adsRedirect=true
This one is rated for 63 W.
My question is: Since the 100 W NGU outputs 12 Volts DC, could I connect this charger to it, and charge my phone?
Many thanks,
Frank Acland
Hello Doctor Rossi
It is considered that the earth connection of an installation must be less than 5 Homs. However, most aging installations far exceed this value.
Your invention requires earthing.
Can you tell me what is the maximum resistance required for the earth connection for the E-cat to operate correctly?
What happens if the resistance exceeds the maximum value?
Kind regards
Raffaele
Mr.Rossi
Let me describe your invention based on your theoretical work. Please don’t make it public if you don’t want to.
E-cat is a resonant vacuum chamber with a little argon. Nickel and lithium is deposited on the resonant line in the chamber and is subjected to a magnetic flux through the winding. As a result, the chamber lights up, an electric field is created and it is possible to draw an electric current. The plasma generator oscillates in the THz range and draws energy from the vacuum via Argon.
All the best J.Š
There is a article about Latina test on Polish news as well. Congrats Andrea!
https://spidersweb.pl/2024/10/najwiekszy-problem-elektrykow-rozwiazany-to-przeczy-logice-ale-tak-wlasnie-wyglada-przelom.html
Dr. Rossi,
An interesting article by Gregory Daigle about your demonstration in Latina:
https://medium.com/@daiglegregory/an-ev-with-unlimited-driving-range-has-been-demonstrated-1ae49f06d566
Kind Regards,
Italo R.
Prof:
Thank you for the update; actually we all are stunned for this unbelievable increase of interest in our theoretical work, although the demonstration of the race between the two Renault cars with one of them powered by the Ecat is an experiment that reinforces strongly the theory described in the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Warm Regards,
A.R.
Steven Nicholes Karels:
Thank you for your suggestions,
Warm Regards,
A.R.
Jaroslav Dobrovolny:
Thank you for your support.
Answers:
1- yes
2- yes
Warm Regards,
A.R.
Dear Dr. Andrea Rossi
We congratulate you on the successful E-cat Latina test.
1.Did I understand correctly that the Sigma 5 e-cat Test was succsessful?
2.Is it possible to use the Ecat Skl NGU for autonome Dry machine or heat pump in CZ?
thank you
Jaroslav Dobrovolny
Dear Andrea Rossi,
Yet another NGU Application – Battery Trickle Charger
A smart battery trickle charger permanently installed in a non-NGU equipped vehicle – motorcycle, car, truck, or boat. It will charge and maintain the 6V, 12V, or 24V battery, while automatically sensing ambient temperature to avoid undercharging or overcharging. Powered by a single NGU 10W unit, it slowly charges a partially or fully discharged battery. No need to plug into an AC socket for power.
Thoughts?
Dr Rossi,
Here are the stunning stats of your papers I found today on
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 154620 ( of which 141428 only for “Ecat SK and Long Range Particle Interactions” ), about 1000 more than yesterday and more than the 100% of 1.5 million publications on Researchgate.
After the demonstration of the Renault Twizy powered by the Ecat the readings, also the Recommendations and the Research Interest Score have increased exponentially…and counting
Prof
Cesare:
Thank you for the suggestion,
Warm Regards,
A.R.
Steven Nicholes Karels:
Thank you !
Warm Regards,
A.R.
Dear Camillo and Readers,
considering the link: https://gradientitemporali.wordpress.com/2024/10/18/il-potere-dell-e-cat/ very interesting and exhaustive, I thought it appropriate to turn it over to the editorial offices of the following newspapers:
Corriere della Sera – Repubblica – La Stampa – Il Fatto Quotidiano – Domani – New Your Times, Associated Press, The Time….etc, etc adding the links to the videos of Youtube,
… inviting them – after having researched – to decide whether it was appropriate to inform their readers about the content of the proposed document.
Cesare
eCat Demo makes mainstream news
https://interestingengineering.com/energy/ev-with-unlimited-range-ecat-power
Italo R.:
Thank you for your support,
Warm Regards,
A.R.
Camillo:
No.
To understand the theoretical bases of the Ecat technology you can, if you want, study the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
In particular the paragraphs 2,3,4,5.
Warm Regards,
A.R.
Brice:
Thank you for your suggestion,
Warm regards,
A.R.
Dear Dr. Rossi,
Do you permit me to insist on the proposal to fly a toy drone?
It doesn’t matter which cheap toy drone you would buy (10-30 Watt). While it would normally fly between 10 and 20 minutes… you could let it fly for many days. I believe this is just a very simple setup, made in day. So very convincing, it would blow everyone away, just as proof of concept of your reactor! I believe orders will flood in!
With kind regards,
Brice
I find it astonishing that at the end of almost 20 years of testing it presents discoveries, various emotions… in the end a “little ant” of just 10 W emerges which becomes the basic building block. With this brick for subsequent aggregations we start and we will see where we arrive. So a small vacuum tube with “xenon” gas inside is induced to emit an electric current at the ends if I understand correctly. I suppose there are random electric discharges of variable INSTANTANEOUS power… the declared power is therefore only the average. I used Xenon lamps in my fifth year of school, I remember that the light they gave off was similar to sunlight and allowed us to evaluate whether the color we had put in the fabric was similar or the same as the sample. (I am a dyer chemist, then a graduate in electronic physics). The Xenon lamp is strongly ionizing and poisonous Ozone is created in such quantities that one could only remain for short periods with the lamp turned on in a special, suitably ventilated environment. Now I wonder, in this E-Cat LED which is at the base there must also be a small battery that triggers it, which is then continuously recharged by the voltage generated itself. Is that so?
Dott. Rossi,
I wrote to the magazines “Focus” and “Quattroruote” talking about the demonstration in Latina. No response.
Kind Regards,
Italo R.
Dear Readers,
Please go to
http://www.rossilivecat.com
to find comments published today in other posts of this blog,
Warm Regards,
A.R.
Brice:
I definitely am not a drone expert,
Warm Regards,
A.R.
Dear Dr. Rossi,
Are you sure we’re talking about the same drones? I mean a toy that can fly or hover about 13 minutes in the air: https://www.walmart.com/ip/DJI-Tello-Boost-Combo-Drone/809454862
The DJI Tello has a 3.8V 1100mAh (4.18Wh) battery. The average power consumption is about 10 Watt. So, if you buy such a drone ($150) today, it can already fly today when you connect 2 E-Cats! Instead of flying 13 minutes, it can keep on flying for years. Such a test is quickly done, within a day, is very cheap and is extremely convincing.
What’s your opinion?
With kind regards,
Brice
Axil:
Thank you for your insight,
Warm Regards,
A.R.
Brice:
We are still far from flying objects,
Warm Regards,
A.R.
Brice:
This issue is related only to recharge Li batteries,
Warm Regards,
A.R.
Dear Dr. Rossi,
There are endless possibilities with the E-Cat-SKL-NGU. However, I understand the safety concerns of ‘Paul’.
Imagine that I install my home with a complete E-Cat-SKL-NGU-installation. Then I always need to be aware that I need a BMS for my car, my laptop, my rechargeable screwdriver… otherwise they could catch fire, isn’t it? I cannot imagine that charging an electric car with built-in E-Cats needs a BMS, while that same car doesn’t need a BMS when being charged by a wall socket that is powered by E-Cats? Can you assure that my neighbour can safely charge his regular electric car in my E-Cat-wall socket?
This might imply that it is not possible to develop an E-Cat power plant, because customers always need to be aware not to use the electric power for charging batteries… or am I wrong?
With kind regards,
Brice
Dear Dr. Rossi,
I’m still very impressed by your Twizzy-demonstration. I think another impressive demonstration can be done with a toy drone without batteries. Imagine that you keep it flying during days in front of the public! Then it is very hard to deny that the E-Cat SKLep NGU is real!
Of course you’ll need security people and a security net around the small flying area against theft. Automated hovering or flying a fixed pattern with a drone can be done with a program, so you don’t need an operator.
What is your thought about it?
With kind regards,
Brice
Dr Rossi has found over years of experimentation as typified when he developed the big 250kW reactors for industrial heat, that in only a very short amount of time, those big reactors failed because of corrosion. This failure of the structure of these powerful reactors was caused by transmutation of elements.
Transmutation is an inescapable result of the nature of the LENR reaction. Transmutations’ effects on matter are scaled to the power density that the reactor puts out. At very low power density, the reactor just affects isotopic makeup of the elements in the reactor structure. Matter that has an even atomic number is affected more than elements that have an odd isotope number. The LENR reaction is magnetic in its nature, Because of this, the magnetic force of the reaction more easily penetrates into the nucleus of the atom when the number of protons in the nucleus are even. In nuclear magnetic resonance (NMR), this feature is termed NMR active elements. Odd atomic elements are more resistant to transmutation than are even atomic number isotopes.
In more detail, an atomic nucleus is NMR-active if it has a non-zero nuclear spin quantum number (I), which means it can interact with external magnetic fields and produce EMF based signals in NMR. These signals weaken the energy that can penetrate into the nucleus of an element since the EMF signal remove energy from the total magnetic power value:
Nuclear spin quantum number
This quantum property is similar to an atom’s spin and characterizes the nucleus’s angular momentum.
Odd or even number of protons and neutrons
Nuclei with an odd number of protons and/or neutrons have a non-zero nuclear spin and are NMR-active. Nuclei with an even number of both protons and neutrons have a nuclear spin quantum number of zero and are not NMR-active which means that the magnetic field of the LENR reaction enters the nucleus of the element at full power.
Spin ½ nuclei or greater
These are the simplest to study and are commonly used in high resolution NMR studies since they produce strong EMF signals.
Spin quantum numbers of isotopes greater than ½
These are also common, but are also generally well-suited for use in reactor structures
Some examples of NMR-active nuclei that are not likely to produce transmutation include:
1H, the 1H isotope of hydrogen
13C, the 13C isotope of carbon
14N, the 14N isotope of nitrogen
19F
31P
As a result of all these considerations, there is a power density limit to the power that a LENR reactor can produce in order to keep transmutation in check during reactor operations. Dr. Rossi has found that this limit to be 10 watts of power. So a large LENR reactor must be composed of many 10 watt cores to keep the structure of a large reactor from disintegrating over time. Also, by using a large number of multiple small cores, enhanced availability results when any single core fails, its contribution to the large core aggregation is automatically compensated for by the aggregation of small cores.
Furthermore, the isotopes in the plasma are not affected by transmutation giving the low powered reactor core a maximum lifetime compared to a high powered reactor.
Gian:
Thank you for the link !
Warm Regards,
A.R.
Estremamente interessante:
https://www.youtube.com/watch?v=OYFju1aDdWE
Ciò che ancora mancano sono le prudenti timide reazioni del mondo accademico.
Siamo pazienti e attendiamo
Un saluto
Gian
Prof:
Thank you for the update; yes, we are receiving from all the world important requests,
Warm Regards,
A.R.
Dr Rossi,
Here are the stats of your publications on Researchgate found today on
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 140000, of which 153238 only for “Ecat SK and Long Range Particle Interactions”, the most read publication of 1.5 publications on Researchgate.
After your demo of Latina the readings had a strong increase.
And counting…
Prof
Camillo:
Thank you for your insight,
Warm Regards,
A.R.
Paul:
Absolutely not ! I have already explained here why.
Warm Regards,
A.R.
Warm Regards,
A.R.
From the recent interview we understand that the application in the automotive field will be long-term and will necessarily involve some car manufacturing company. The application in photovoltaics seems closer and simpler. If I understand correctly, the symbiosis of your system with a photovoltaic system doubles its output. In practice we could say that if we had solar panels that went from a yield that we estimate at 25% (the latest ones have even more) with the addition of your new device they would go to 50%. An epochal revolution.
Dr.Rossi,
Do special safety measures need to be taken for e-cats installed at home?
I refer to the security measures taken in the electric car.
Kind Regards,
Paul
Rik:
Yes, it is possible.
When we will start delivering the Ecats you can contact us to see what we can do.
Warm Regards,
A.R.
I am sorry. I mean is it possible to charge lithium lifeo4 batteries, since their voltage is a bit higher at around 13.4 V
Also: would there be any way to sell your products in third party websites?
We have a platform that focuses on wellness and sustainable products. Your product would be a perfect fit for our target audience.
Thank you!
Viggo:
Thank you !
Warm Regards,
A.R.
Klas:
Thank you !
Warm Regards
A.R.
To All:
I fully agree with Koen.
I also find the newly published whitepaper about E-Cat Power a good complement to the videos and quite useful for linking media and professionals.
Klas
Dear Andrea,
It was very exiting and inspiring to watch your latest interview just shared on the E-Cat World youtube channel.
Thank you very much for sharing valuable information!
Last week I ordered another 10 x 100 W e-Cat NGU (I like the “NGU” – so true!)
Best of luck with everything that lies ahead now!
Kind regards
Viggo
Koen Vandewalle:
Thank you for your precious help,
Warm Regards,
A.R.
Gianluca:
We will serve all the Clients of the world, without any territorial exclusions.
Warm Regards,
A.R.
Gentile A.R.
Ho appena ascoltato l’intervista rilasciata a Frank e sono curioso di sapere se, nei tuoi piani produttivi, ci sia anche l’Italia. Grazie
English: do you plan to distribute the Ecats also in Italy ?