Steve D:
1. yes
2. which references are you referring to ?
3. the Ecat is not certified for seafaring
4. depends to the power needed by the gyroscope and the power of the Ecat
5. same as in 3
6. yes, obviously provided it is turned off
Warm Regards,
A.R.
Anonymous:
“phase” has many meanings, depending on which context this term is used in.
In the paper you cited the meaning is the following:
Coherent ( = IN PHASE ) charge clusers may form compact nuclear aggregates whose coherence determines a reverse difference of Entropy, from which derive minor thermal capacity, minor freedom degrees, and it is this Reverse Difference of Entropy that frees the Zero Point Energy, eventually transferred to the electrons not in phase ( = not coherent with these charge clusters ).
Please refer to the paragraphs 2,3,4,5 of the paper you cited, wherein this mechanism is explained rigorously. This is the meaning of “phase” in the context of our theoretical hypothesis.
Warm Regards,
A.R.
Dear Andrea
What future lies ahead? the economy of the world is based on energy exchanges with all the well known good and bad consequences, technology more than science is running faster and faster and there are already warnings of the next big changes that will be difficult to pilot, and your invention is one of them:
1) Advances in Artificial Intelligence are daily and the highest performing systems will progressively be more and more in the hands of a very few because of the rising costs of operating them, and among these certainly some will not be … benefactors.
2) Quantum computers promise computational speeds unthinkable for current ones, and after useful and legal applications, surely among the first applications will be decryption of passwords or secret codes that instead of taking months will happen in seconds, and cryptocurrencies will be one of the first targets.
3) the World do not seem to have noticed your ECAT yet, and all the media continue to talk about fossils, renewables and nuclear fusion as if nothing is changing. And here some thoughts:
With ECAT, the availability of almost infinite electricity EVERYWHERE without the need for drilling or mining, transportation and distribution will bring enormous benefits but also enormous upheavals in the world economy. Among the positives just think of the reduction in pollution, the almost free availability of fresh water from desalination or purification, the decrease in conflicts over traditional energy resources and a certain leveling of economic availability among all populations, but in the immediate term the negatives of abandoning current energy systems will result in unemployment everywhere to which, if not provided for, very serious social strife will ensue.
In addition to the honors and the most relevant place in the history of Humanity, you have enormous responsibilities Andrea, and as soon as the industrial production of your systems is confirmed you should make a full-bodied press release with information professionals of the highest caliber illustrating the worldwide changes that your system will produce.
Thank you.
Neri
1) If it was mounted with a tilt but yet stationary and stable would it work?
2) What are the tilt references we are talking about?
3) For seafaring travel would it be required that the ecat be subject to gyroscopic stabilisation?
4) Could the ecat provide its own energy for a gyroscope yet have energy to spare for user operation?
5) For space travel does tilt have a meaning, once again what are the references?
6) For users who want to charge their phone or torch while on the move is it satisfactory to simply throw the ecat and device in their bag or backpack?
Buonasera. Ad integrazione del messaggio del 14/11 integro ciò sul numero di imbarcazioni da diporto attualmente in acqua:A fare una stima precisa a intervalli regolari è infatti l’ICOMIA, l’associazione mondiale dei produttori nautici, che ha tutto l’interesse di sapere come sono distribuite le imbarcazioni da diporto nel mondo. Ebbene, stando ai numeri pubblicati nel 2020 da ICOMIA, nel mondo ci sono ben 33 milioni di
barche.9 mar 2021. Aggiungo che tutte hanno bisogno di energia quando il motore è spento. Le chiedo: l’ inclinazione ed il movimento ondulatorio inficiano il funzionamento dell’ unità NGU da 100W? Grazie
Hi Dr Rossi.
I am hoping to get a response to my question,
2024-11-16 15:35 LarryG
Dear Dr. Rossi
In your Oct 15th interview with Frank you mentioned you thought time to reach your 100MW order goal would be measured in months rather than weeks. Also shortly after the EV tests you confirmed that you had enough inquiries that even if less than half of them turned into orders, you would reach your goal, and recently said that your inquiry rate has very much accelerated since the EV test.
So its been a month+ since your interview commsent, can you update us please
1) Do you think the odds are better than 50% that you will reach your order goal this year?
I fully understand this might be only your gut estimate and not based on statistical analysis of your inquiry/order data, and we will not hold you to it, but am very sure your followers would very much like to get this non-binding estimate.
Hello Dr Rossi !
I read at the white Paper / Integration :
Solar Power systems: The first official demonstration of an NGU Power Generator adapted
for direct integration in modern solar systems is scheduled for Q4 2024
.
I will hope so..:-)
Wish you all the power and good look
following what Wilfried wrote, I’d like to install an E-Cat NGU 1 kW Generator in my electric motorcycle, since it’s a motorcycle an accident with a fall is possible, in addition to a possible non-repairable damage of the E-cat is there any other particular risk? in short, can I replace the e-cat without risking anything else than what I risk with the fall from the motorcycle? …. it has dimensions 25 x 15 x 10 cm, what is the height and the sides of the base ? is it mandatory to install it in only one way (i prefer 25 cm is the height) ?
Hi,Andrea. What my home, and millions like my own, really needs is an E-Cat powered, wall-mounted, boiler to replace the existing gas -powered equivalent which supplies all the hot water currently used in the central heating system,etc. The volumetric size should be comparable.
1) Have you, to date, been seriously thinking of providing such a suitable and vastly- profitable solution to needs such as mine?
2) If the answer to the first question is yes, is Leonardo doing any relevant, practical research on this project at this time?
For myself, the heat pump idea seems to be a patching method rather than an advanced, futuristic-looking solution. Yours would make no noise at all and have no large electrical running expenses. Much to be preferred.
I would imagine that the buying cost will be no more than any heat pump apparatus and may even be cheaper, since the installation work should be very little by comparison. Also, no special permissions will be required as is the case in my town. Simply a direct swap of one boiler for another in the exact same position.
A stand-alone ,portable air heater will have its uses but not suitable for my overall needs.
Wilfried:
It depends on the specific situation and the violence of the tilt; the manual will recommend not to move the Ecat when it is operating.
Warm Regards,
A.R.
@ Klas,
The question was if 60V 100W would be a customer specific delivery which would result in higher price and a delayed delivery.
Andra Rossi has replied to that question.
Kind regards,
Calle H
Dear Mr. Rossi
in Austria, electricity grid charges are currently rising by a quarter. Please make an effort to start production of the ecat as soon as possible.
Thank you very much
Felix
The 60V/100W DIY module may obviously be realized by serial connecting five pieces of a 12V/20W DIY module (two parallel connected 12V/10W NGU Power Cells).
When I was first starting out developing technology, I got lots of patents, and I thought this was a good thing.
And then I discovered that a patent was really like buying a lottery ticket to a lawsuit.
I’d rather not buy those tickets.
=================================
The Wright brothers focused on defending their patents instead of running their business which is why nobody today even knows they owned an aircraft company, Wright Company
Dear Dr. Rossi
In your Oct 15th interview with Frank you mentioned you thought time to reach your 100MW order goal would be measured in months rather than weeks. Also shortly after the EV tests you confirmed that you had enough inquiries that even if less than half of them turned into orders, you would reach your goal, and recently said that your inquiry rate has very much accelerated since the EV test.
So its been a month+ since your interview commsent, can you update us please
1) Do you think the odds are better than 50% that you will reach your order goal this year?
I fully understand this might be only your gut estimate and not based on statistical analysis of your inquiry/order data, and we will not hold you to it, but am very sure your followers would very much like to get this non-binding estimate.
Calle H:
Customized versions will delay the delivery to terms that depend on the situation.
Anyway, the Clients will have the possibility to discuss the particular situations and the customizations when we will contact them to turn the not binding pre-orders into a regular orders,
Warm Regards,
A.R.
If I have understood correctly the “standard” NGU unit is rated 12V and 100W.
In my application the design requires 60V and 100W. If Leonardo would do the wiring and unit assembly would this be a customer specific delivery with a higher price tag? and at a later delivery? than if I would accept to receive the standard NGU.
Dr Rossi,
I can see in the socials and on Researchgate that the Latina test has raised significantly the public interest in the Ecat technology; did you have analogous surge of interest from the financial and industrial environment ?
Rupert:
All the references are important: each of one has a specific function that corresponds to its number of reference marked along the text,
Warm Regards,
A.R.
I have preordered an ECAT unit, I think you have previously stated that the output connection will be customisable depending on the customers needs. Will you be offering USB output for low power applications?
Wishing you all the best with the production
The production start date seems to be approaching. Could you please describe the modalities for pre-ordering again.
As I understand it, private pre-orders are completely non-binding and can be updated or canceled at the time of possible delivery.
Orders will be processed and delivered in the order of the first of all orders until the start of production.
Is this all correct?
Does this priority remain for repeat orders after the start of production and also after the first delivery?
Will you change the procedure after you have started delivery?
I am particularly interested in one specific question: If I am contacted after the start of production to update the order and delivery, how long can I take to decide exactly what I want?
The background to this is that I have various private projects that I would like to equip with E-Cat, but I won’t be able to do the actual dimensioning until the time of delivery.
Buonasera, vorrei suggerire una particolare attenzione all’esigenza di energia sulle barche a vela. Il principale consumo è determinato dal frigorifero,acceso H24,e dall’ autopilota. Il mercato è enorme. Una unità NGU da 100W sarebbe sufficiente con un vostro molto inferiore rispetto a realizzazione di rollbar con pannelli solari o impianto eolico, entrambi funzionanti per meno ore. Utili indicazioni per i collegamenti con l’ impianto elettrico. Grazie e auguri
ENGLISH SYNOPSIS
I suggest you to focus your attention on frigids and other appliances in the sailboats: it is a big market and your ssm device can become quite popular in this field
Dr Rossi,
Congratulations for the new updated website http://www.ecat.com
It is rich of information, important links ans quite exhaustive.
All the best,
Yuri
In my opinion, it is important for the European market to offer your 1kw modules, 2kW modules and 3k modules with higher DC output voltages.
Here is the technical justification:
The technically easiest integration into a household system is as an additional “photovoltaic module” into an existing photovoltaic system.
Hybrid inverters for PV systems are designed as energy managers and manage the battery storage system as well as the power generators and the power drawn from the public grid and fed into the public grid.
In such a system, an E-Cat would be integrated via a free PV connection on the inverter. Conventional inverters have 2 – 3 such connections. The E-Cat could then also charge the connected battery storage system.
Such a connection has the following DC voltage specifications (example: FOX-ESS H3 12kW inverter):
DC nominal operating voltage: 750V
MPP voltage range 150V – 850V (DC)
Starting operating voltage: 160V (DC)
An E-Cat module (1 kW – 3 kW) must fulfill this requirement in terms of voltage in order to be easily integrated into an existing PV system.
I would therefore recommend a DC voltage of 200V – 240V (DC).
My example specifications for the PV connection refer to the FOX-ESS H3 12kW inverter. Other hybrid inverters have comparable specifications.
My urgent request is to offer E-Cat-modules with this specification as a standard product.
Steve D:
1. yes
2. which references are you referring to ?
3. the Ecat is not certified for seafaring
4. depends to the power needed by the gyroscope and the power of the Ecat
5. same as in 3
6. yes, obviously provided it is turned off
Warm Regards,
A.R.
Neri Accornero:
We will do.
Warm Regards,
A.R.
Anonymous:
“phase” has many meanings, depending on which context this term is used in.
In the paper you cited the meaning is the following:
Coherent ( = IN PHASE ) charge clusers may form compact nuclear aggregates whose coherence determines a reverse difference of Entropy, from which derive minor thermal capacity, minor freedom degrees, and it is this Reverse Difference of Entropy that frees the Zero Point Energy, eventually transferred to the electrons not in phase ( = not coherent with these charge clusters ).
Please refer to the paragraphs 2,3,4,5 of the paper you cited, wherein this mechanism is explained rigorously. This is the meaning of “phase” in the context of our theoretical hypothesis.
Warm Regards,
A.R.
Dear Andrea
What future lies ahead? the economy of the world is based on energy exchanges with all the well known good and bad consequences, technology more than science is running faster and faster and there are already warnings of the next big changes that will be difficult to pilot, and your invention is one of them:
1) Advances in Artificial Intelligence are daily and the highest performing systems will progressively be more and more in the hands of a very few because of the rising costs of operating them, and among these certainly some will not be … benefactors.
2) Quantum computers promise computational speeds unthinkable for current ones, and after useful and legal applications, surely among the first applications will be decryption of passwords or secret codes that instead of taking months will happen in seconds, and cryptocurrencies will be one of the first targets.
3) the World do not seem to have noticed your ECAT yet, and all the media continue to talk about fossils, renewables and nuclear fusion as if nothing is changing. And here some thoughts:
With ECAT, the availability of almost infinite electricity EVERYWHERE without the need for drilling or mining, transportation and distribution will bring enormous benefits but also enormous upheavals in the world economy. Among the positives just think of the reduction in pollution, the almost free availability of fresh water from desalination or purification, the decrease in conflicts over traditional energy resources and a certain leveling of economic availability among all populations, but in the immediate term the negatives of abandoning current energy systems will result in unemployment everywhere to which, if not provided for, very serious social strife will ensue.
In addition to the honors and the most relevant place in the history of Humanity, you have enormous responsibilities Andrea, and as soon as the industrial production of your systems is confirmed you should make a full-bodied press release with information professionals of the highest caliber illustrating the worldwide changes that your system will produce.
Thank you.
Neri
Dr Rossi,
In the paper http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
is written that Zero Point Energy d transferred to the electrons not in phase: what does “in phase” mean ?
Dear Andrea Rossi
Regarding the issue of ecat tilt.
1) If it was mounted with a tilt but yet stationary and stable would it work?
2) What are the tilt references we are talking about?
3) For seafaring travel would it be required that the ecat be subject to gyroscopic stabilisation?
4) Could the ecat provide its own energy for a gyroscope yet have energy to spare for user operation?
5) For space travel does tilt have a meaning, once again what are the references?
6) For users who want to charge their phone or torch while on the move is it satisfactory to simply throw the ecat and device in their bag or backpack?
Thank you.
Buonasera. Ad integrazione del messaggio del 14/11 integro ciò sul numero di imbarcazioni da diporto attualmente in acqua:A fare una stima precisa a intervalli regolari è infatti l’ICOMIA, l’associazione mondiale dei produttori nautici, che ha tutto l’interesse di sapere come sono distribuite le imbarcazioni da diporto nel mondo. Ebbene, stando ai numeri pubblicati nel 2020 da ICOMIA, nel mondo ci sono ben 33 milioni di
barche.9 mar 2021. Aggiungo che tutte hanno bisogno di energia quando il motore è spento. Le chiedo: l’ inclinazione ed il movimento ondulatorio inficiano il funzionamento dell’ unità NGU da 100W? Grazie
Hi Dr Rossi.
I am hoping to get a response to my question,
2024-11-16 15:35 LarryG
Dear Dr. Rossi
In your Oct 15th interview with Frank you mentioned you thought time to reach your 100MW order goal would be measured in months rather than weeks. Also shortly after the EV tests you confirmed that you had enough inquiries that even if less than half of them turned into orders, you would reach your goal, and recently said that your inquiry rate has very much accelerated since the EV test.
So its been a month+ since your interview commsent, can you update us please
1) Do you think the odds are better than 50% that you will reach your order goal this year?
I fully understand this might be only your gut estimate and not based on statistical analysis of your inquiry/order data, and we will not hold you to it, but am very sure your followers would very much like to get this non-binding estimate.
Regards
LarryG
Ambrogio:
I am glad to read that you replicated our test following the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Yes, from your description I think it is possible you made Zero Point Energy.
Warm Regards,
A.R.
Hello Dr Rossi !
I read at the white Paper / Integration :
Solar Power systems: The first official demonstration of an NGU Power Generator adapted
for direct integration in modern solar systems is scheduled for Q4 2024
.
I will hope so..:-)
Wish you all the power and good look
following what Wilfried wrote, I’d like to install an E-Cat NGU 1 kW Generator in my electric motorcycle, since it’s a motorcycle an accident with a fall is possible, in addition to a possible non-repairable damage of the E-cat is there any other particular risk? in short, can I replace the e-cat without risking anything else than what I risk with the fall from the motorcycle? …. it has dimensions 25 x 15 x 10 cm, what is the height and the sides of the base ? is it mandatory to install it in only one way (i prefer 25 cm is the height) ?
Hi,Andrea. What my home, and millions like my own, really needs is an E-Cat powered, wall-mounted, boiler to replace the existing gas -powered equivalent which supplies all the hot water currently used in the central heating system,etc. The volumetric size should be comparable.
1) Have you, to date, been seriously thinking of providing such a suitable and vastly- profitable solution to needs such as mine?
2) If the answer to the first question is yes, is Leonardo doing any relevant, practical research on this project at this time?
For myself, the heat pump idea seems to be a patching method rather than an advanced, futuristic-looking solution. Yours would make no noise at all and have no large electrical running expenses. Much to be preferred.
I would imagine that the buying cost will be no more than any heat pump apparatus and may even be cheaper, since the installation work should be very little by comparison. Also, no special permissions will be required as is the case in my town. Simply a direct swap of one boiler for another in the exact same position.
A stand-alone ,portable air heater will have its uses but not suitable for my overall needs.
Thanks for any encouraging reply. Jean Pierre.
Dear Andrea,
I saw your announcement on X today about 150,000 readings of your paper on ResearchGate: https://twitter.com/LeonardoCorpor3/status/1858514022233931832 Congratulations!
What effect do you think your paper has had on helping generate pre-orders and contracts with big buyers?
Many thanks,
Frank Acland
Wilfried:
It depends on the specific situation and the violence of the tilt; the manual will recommend not to move the Ecat when it is operating.
Warm Regards,
A.R.
@ Klas,
The question was if 60V 100W would be a customer specific delivery which would result in higher price and a delayed delivery.
Andra Rossi has replied to that question.
Kind regards,
Calle H
Dear Andrea,
what happens if you start to tilt the E-Cat during operation? Is it switched off at a certain inclination, which one?
Best regards
Wilfried
Felix:
That’s what we are doing,
Warm Regards,
A.R.
Dr Rossi,
I made a circuit inspired by the paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
and following your direction I studied the paragraphs 2,3,4,5 and I am excited to tell you that I had an increase of Voltage and a gain of watts !!!
Couls it be zero point energy ?
Thank you,
Julian
Dear Mr. Rossi
in Austria, electricity grid charges are currently rising by a quarter. Please make an effort to start production of the ecat as soon as possible.
Thank you very much
Felix
LarryG:
I hope so,
Warm Regards,
A.R.
LarryG:
The 150000 Total Readings reached by
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
are more than any publication on Researchgate, as far as I know.
Prof
Larry:
Thank you for your opinion,
Warm Regards,
A.R.
@ Calle H:
The 60V/100W DIY module may obviously be realized by serial connecting five pieces of a 12V/20W DIY module (two parallel connected 12V/10W NGU Power Cells).
Rgds
Klas
ELON: PATENTS BENEFIT LAWYERS, NOT COMPANIES
“I don’t like patents, personally.
When I was first starting out developing technology, I got lots of patents, and I thought this was a good thing.
And then I discovered that a patent was really like buying a lottery ticket to a lawsuit.
I’d rather not buy those tickets.
=================================
The Wright brothers focused on defending their patents instead of running their business which is why nobody today even knows they owned an aircraft company, Wright Company
Dear Prof
Is the 150K reads more than all other papers on Research Gate, or “just” more than 16,000,000 papers.
If the latter, how many paper have more reads?
Best Regards
LarryG
Dear Dr. Rossi
In your Oct 15th interview with Frank you mentioned you thought time to reach your 100MW order goal would be measured in months rather than weeks. Also shortly after the EV tests you confirmed that you had enough inquiries that even if less than half of them turned into orders, you would reach your goal, and recently said that your inquiry rate has very much accelerated since the EV test.
So its been a month+ since your interview commsent, can you update us please
1) Do you think the odds are better than 50% that you will reach your order goal this year?
I fully understand this might be only your gut estimate and not based on statistical analysis of your inquiry/order data, and we will not hold you to it, but am very sure your followers would very much like to get this non-binding estimate.
Regards
LarryG
Sasha:
I think so, but it will depend on the market demand,
Warm Regards,
A.R.
Benedict Baldacci:
Yes,
Warm Regards,
A.R.
Calle H:
Customized versions will delay the delivery to terms that depend on the situation.
Anyway, the Clients will have the possibility to discuss the particular situations and the customizations when we will contact them to turn the not binding pre-orders into a regular orders,
Warm Regards,
A.R.
Dear Dr. Rossi,
If I have understood correctly the “standard” NGU unit is rated 12V and 100W.
In my application the design requires 60V and 100W. If Leonardo would do the wiring and unit assembly would this be a customer specific delivery with a higher price tag? and at a later delivery? than if I would accept to receive the standard NGU.
Kind regards,
Calle H
Dr Rossi,
Is the Ecat NGU to heat a resistance ?
Benedict
Dr Rossi,
Today the publication
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
reached 150000 total readings, more than 16 million publications on Researchgate !
And counting…
Prof
My opinion is that the main application of the Ecat will be to heat resistive loads, am I correct ?
Sasha
Julius:
Definitely yes,
Warm Regards,
A.R.
Dr Rossi,
I can see in the socials and on Researchgate that the Latina test has raised significantly the public interest in the Ecat technology; did you have analogous surge of interest from the financial and industrial environment ?
Massimo:
Thank you for the suggestion,
Warm Regards,
A.R.
Rupert:
All the references are important: each of one has a specific function that corresponds to its number of reference marked along the text,
Warm Regards,
A.R.
Wilfried:
1- yes
2- depends on the kind of renewal
3- no
4- 24 hours
Warm Regards,
A.R.
Alexw:
Possibly,
Warm Regards,
A.R.
I have preordered an ECAT unit, I think you have previously stated that the output connection will be customisable depending on the customers needs. Will you be offering USB output for low power applications?
Wishing you all the best with the production
Dear Andrea,
The production start date seems to be approaching. Could you please describe the modalities for pre-ordering again.
As I understand it, private pre-orders are completely non-binding and can be updated or canceled at the time of possible delivery.
Orders will be processed and delivered in the order of the first of all orders until the start of production.
Is this all correct?
Does this priority remain for repeat orders after the start of production and also after the first delivery?
Will you change the procedure after you have started delivery?
I am particularly interested in one specific question: If I am contacted after the start of production to update the order and delivery, how long can I take to decide exactly what I want?
The background to this is that I have various private projects that I would like to equip with E-Cat, but I won’t be able to do the actual dimensioning until the time of delivery.
Best regards
Wilfried
Which are the most important references of the publication
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
For a guy that wants to understand well how to replicate the zero point energy effect ?
Buonasera, vorrei suggerire una particolare attenzione all’esigenza di energia sulle barche a vela. Il principale consumo è determinato dal frigorifero,acceso H24,e dall’ autopilota. Il mercato è enorme. Una unità NGU da 100W sarebbe sufficiente con un vostro molto inferiore rispetto a realizzazione di rollbar con pannelli solari o impianto eolico, entrambi funzionanti per meno ore. Utili indicazioni per i collegamenti con l’ impianto elettrico. Grazie e auguri
ENGLISH SYNOPSIS
I suggest you to focus your attention on frigids and other appliances in the sailboats: it is a big market and your ssm device can become quite popular in this field
@Terry (Capt.T)
Great suggestion, thank you !
Ambrogio
Terry (Capt.T):
Thank you for your support,
Warm Regards,
A.R.
Anonymous:
Yes,
Warm regards,
A.R.
MaBi:
Thank you for your suggestions,
Warm Regards,
A.R.
Yuri:
Thank you for your attention to our work,
Warm Regards,
A.R.
Dr Rossi,
Congratulations for the new updated website http://www.ecat.com
It is rich of information, important links ans quite exhaustive.
All the best,
Yuri
Dear Dr. Rossi.
In my opinion, it is important for the European market to offer your 1kw modules, 2kW modules and 3k modules with higher DC output voltages.
Here is the technical justification:
The technically easiest integration into a household system is as an additional “photovoltaic module” into an existing photovoltaic system.
Hybrid inverters for PV systems are designed as energy managers and manage the battery storage system as well as the power generators and the power drawn from the public grid and fed into the public grid.
In such a system, an E-Cat would be integrated via a free PV connection on the inverter. Conventional inverters have 2 – 3 such connections. The E-Cat could then also charge the connected battery storage system.
Such a connection has the following DC voltage specifications (example: FOX-ESS H3 12kW inverter):
DC nominal operating voltage: 750V
MPP voltage range 150V – 850V (DC)
Starting operating voltage: 160V (DC)
An E-Cat module (1 kW – 3 kW) must fulfill this requirement in terms of voltage in order to be easily integrated into an existing PV system.
I would therefore recommend a DC voltage of 200V – 240V (DC).
My example specifications for the PV connection refer to the FOX-ESS H3 12kW inverter. Other hybrid inverters have comparable specifications.
My urgent request is to offer E-Cat-modules with this specification as a standard product.
Thank you very much.
Best regards, MaBi