Your R&D work on producing electricity directly from plasma energy is fascinating.
You pushed me to do my homework. I learned that Faraday’s Law of Electromagnetic Induction states that “When an electric conductor move across an a magnetic field, an emf is induced in it, which produces an electric current”.
Have you tested the usefulness of:
1. Neodymium magnets?
2. Tesla torrid coils?
3. Creating a vortex by either spinning your e-Cat device or creating a spiral designed e-Cat?
Nils Fryklund:
2- yes, there is a thermostat
3- the area has not been disclosed, the E-Cat SK has been interrupted less that the 20% of the operation time
Warm Regards,
A.R.
Best Andrea!
Question 2: I mean that buildings must have different effect in it´s heat source depending on out-door temperatur, to keep constant tempertur inside, for exemple +21 degree.
Question 3: Has E-catSK in Chicago-area only had short interruptions, or more than 20% interruptions since 19/11 -18.
Best regards
Nils Fryklund
G.:
Probably out there they are riding E-Cats ( he,he,he…)
Speaking seriously, yes, I read it on the science page of AP and it is very interesting, because the new trove made by the Nobel laureate Adam Riess, who calculated a higher Hubble number than it was believed before, is in contrast with the calculations related to the former number, about which nobody has been able to find any error.
To overcome the contradiction it is necessary the hypothesis that dark matter or something unknown by the contemporary Physics is there. This could jeopardize how is known what is known, since something considered impossible appears to be possible indeed.
Warm Regards,
A.R.
Best Andrea!
1. Is it still only one E-catSK working in production?
2. Has the E-catSk worked in varied effects depending on the outdoor temperatur the whole time?
3. Has the first E-catSK worked at least 80% of the time since 19/11 -18?
Best regards
Nils Fryklund
Roy Diclaudio:
Please, before signing anything or paying any money, write us to this address: info@leonardocorp1996.com
We will immediately give you due information.
Warm Regards,
A.R.
Dr Rossi:
How can we know if persons or companies that offer us shares or products are really your agents or licensees?
Thank you if you can answer,
Roy
Dear Dr Andrea Rossi,
In your quest to reach the generation of electricity from the plasma are you using some sort of the photoelectric effect ?
Cheers
Therese
Hi Andrea,
Probably the gradient of the electric field that generates the plasma, has a preferential direction, quite easy to withdraw, but it could be equally interesting if it was cahotic, also if more difficult to use for energy withdraving.
Probably you have to use some grids as electrodes, probably within the plasma the ddp is not exceptionally high, and currents are quite high, but probably applying the load to grids, they stop the plasma, due the dropping of voltage that their load introduces.
Probably would be a good idea to work with low current to interfere as low as possible with the plasma.
Probably a such goal could be reached using inductors of appropriate value, in a particular circuit, switching at high frequency the inductors from the grids to the load, in such way the inductors will draw energy from the grids at high impedance, and then supply the load without affect hardly the plasma.
Probably…
Ron Stringer:
The impulse came from the measurements of e.m. felds out of the core of the reactors, as you can see in http://www.ecatskdemo.com.
Warm Regards,
A.R.
Questions:
1-To resolve the problems did you have to improve software or hardware?
2- During Summer will your sales of heat decrease?
3- Is some customer using heat to make cold?
Regards,
Szymon Blachuta
Mary:
Yes, it was absolutely unexpected: it is very difficult to read and therefore it is restricted to the scientific echelons…I was expecting several hundreds of readings in one year and would have considered it a success !
Warm Regards,
A.R.
About a month ago you confirmed more than one 1MW E-Cat SK order
from Sweden.
Some questions:
1. When this year do you plan to ship the first to Sweden?
a. before July
b. July-August
c. Sept-Oct
2. When do you plan to start it after installation?
a. before August
b. Sept-Oct
c. Nov-Dec
You stated that you have encountered and solved some problems with your first industrial E-Cat.
1 – Can you tell us if your customer had to restart their boiler when solving problems or the E-Cat was quickly put back into service?
2 – Has the E-Cat had problems of stability, slowdown, runaway, stop?
All my support for your work.
Best regards
Raffaele
Frank Acland:
I do not know, right now. We will try to get as much as possible electric energy, if we will succeed. We are working very, very, very hard on it.
Warm Regards,
A.R.
a. this make the operation of the eCat-SK more sensitive to external magnetic fields?
b. If a. is true, will you need to add magnetic shielding to your eCat-SK?
Jobert:
To make electric energy from heat causes a loss of energy of about 65%, making heat fron electric energy the COP is almost 1, considering that the cosphi of a resistor is 1.
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
What do you think is the advantage to make electricity as much as possible instead of heat, since with heat you can make also electricity?
Jobert
Are you aware of this system to make air conditioned by means of heat? https://www.sounenergy.nl/theac-25/
This could be a good match for the Ecat make a complete climatization.
Dear Dr Andrea Rossi,
The video http://www.ecatskdemo.com is getting viral.
Dear Andrea Rossi,
1. Given that the eCat is operating in a self-sustaining mode (SSM), will not the time to turn-off be dictated by the average duration of the SSM?
2. Specifically, you cannot turn off the heat generation while it is still in the SSM mode?
Daniel G. Zavela:
We tried 1 and 2, not 3.
Thank you for your kind words.
Warm Regards,
A.R.
Dear Dr. Rossi,
Your R&D work on producing electricity directly from plasma energy is fascinating.
You pushed me to do my homework. I learned that Faraday’s Law of Electromagnetic Induction states that “When an electric conductor move across an a magnetic field, an emf is induced in it, which produces an electric current”.
Have you tested the usefulness of:
1. Neodymium magnets?
2. Tesla torrid coils?
3. Creating a vortex by either spinning your e-Cat device or creating a spiral designed e-Cat?
Wishing you the best with your exciting R&D work.
Best Regards,
Daniel G. Zavela
Nils Fryklund:
2- yes, there is a thermostat
3- the area has not been disclosed, the E-Cat SK has been interrupted less that the 20% of the operation time
Warm Regards,
A.R.
Best Andrea!
Question 2: I mean that buildings must have different effect in it´s heat source depending on out-door temperatur, to keep constant tempertur inside, for exemple +21 degree.
Question 3: Has E-catSK in Chicago-area only had short interruptions, or more than 20% interruptions since 19/11 -18.
Best regards
Nils Fryklund
G.:
Probably out there they are riding E-Cats ( he,he,he…)
Speaking seriously, yes, I read it on the science page of AP and it is very interesting, because the new trove made by the Nobel laureate Adam Riess, who calculated a higher Hubble number than it was believed before, is in contrast with the calculations related to the former number, about which nobody has been able to find any error.
To overcome the contradiction it is necessary the hypothesis that dark matter or something unknown by the contemporary Physics is there. This could jeopardize how is known what is known, since something considered impossible appears to be possible indeed.
Warm Regards,
A.R.
Nils Fryklund:
1- no
2- can you rephrase?
3- can you rephrase?
Warm Regards,
A.R.
Best Andrea!
1. Is it still only one E-catSK working in production?
2. Has the E-catSk worked in varied effects depending on the outdoor temperatur the whole time?
3. Has the first E-catSK worked at least 80% of the time since 19/11 -18?
Best regards
Nils Fryklund
Dear Dr Rossi:
Are you informed of the new study that says universe is expanding faster than expected?
Therese Munzell:
No.
Warm Regards,
A.R.
Roy Diclaudio:
Please, before signing anything or paying any money, write us to this address:
info@leonardocorp1996.com
We will immediately give you due information.
Warm Regards,
A.R.
Antonella:
No,
Warm regards,
A.R.
In the blue body of the Ecat SK shown in http://www.ecatskdemo.com is there a peephole to see the plasma ( the “ballerina”)?
Dr Rossi:
How can we know if persons or companies that offer us shares or products are really your agents or licensees?
Thank you if you can answer,
Roy
Dear Dr Andrea Rossi,
In your quest to reach the generation of electricity from the plasma are you using some sort of the photoelectric effect ?
Cheers
Therese
Alessandro Coppi:
Probably all that is confidential, yes or no as the answers might be.
Warm Regards,
A.R.
Hi Andrea,
Probably the gradient of the electric field that generates the plasma, has a preferential direction, quite easy to withdraw, but it could be equally interesting if it was cahotic, also if more difficult to use for energy withdraving.
Probably you have to use some grids as electrodes, probably within the plasma the ddp is not exceptionally high, and currents are quite high, but probably applying the load to grids, they stop the plasma, due the dropping of voltage that their load introduces.
Probably would be a good idea to work with low current to interfere as low as possible with the plasma.
Probably a such goal could be reached using inductors of appropriate value, in a particular circuit, switching at high frequency the inductors from the grids to the load, in such way the inductors will draw energy from the grids at high impedance, and then supply the load without affect hardly the plasma.
Probably…
Probably regards
Alessandro Coppi
Ron Stringer:
The impulse came from the measurements of e.m. felds out of the core of the reactors, as you can see in http://www.ecatskdemo.com.
Warm Regards,
A.R.
Szymon Blachuta:
1- both
2- no
3- no
Warm Regards,
A.R.
Questions:
1-To resolve the problems did you have to improve software or hardware?
2- During Summer will your sales of heat decrease?
3- Is some customer using heat to make cold?
Regards,
Szymon Blachuta
I am amazed from what you are doing, especially to make electricity directly from plasma.
How did you arrive to this point?
Best Regards,
Ron Stringer
Sven B:
We will give this information in due time,
Warm Regards,
A.R.
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today on other posts of this blog,
Warm Regards,
A.R.
Bradley:
If we will succeed, probably yes,
Warm Regards,
A.R.
Mary:
Yes, it was absolutely unexpected: it is very difficult to read and therefore it is restricted to the scientific echelons…I was expecting several hundreds of readings in one year and would have considered it a success !
Warm Regards,
A.R.
Congratulations: your paper on Researchgate has reached 18 000 full readings in three months: it is unheard of.
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Godspeed,
Mary
Dear Dr Rossi,
Will you make a presentation also for the direct electricity production as you did in http://www.ecatskdemo.com for the Ecat SK?
Dear Andrea Rossi,
About a month ago you confirmed more than one 1MW E-Cat SK order
from Sweden.
Some questions:
1. When this year do you plan to ship the first to Sweden?
a. before July
b. July-August
c. Sept-Oct
2. When do you plan to start it after installation?
a. before August
b. Sept-Oct
c. Nov-Dec
All success to you and your team.
Sven B
Raffaele Bongo:
1- our Customers have a back up
2- stop
Thank you for your kind support,
Warm Regards,
A.R.
Hello A. Rossi
You stated that you have encountered and solved some problems with your first industrial E-Cat.
1 – Can you tell us if your customer had to restart their boiler when solving problems or the E-Cat was quickly put back into service?
2 – Has the E-Cat had problems of stability, slowdown, runaway, stop?
All my support for your work.
Best regards
Raffaele
Frank Acland:
I am working every day on it. Yes, we are progressing, but much work remains to do.
Warm Regards,
A.R.
Dear Andrea,
Are you making any progress in your work towards your goal of E-Cat electricity generation?
Thank you very much,
Frank Acland
Frank Acland:
I do not know, right now. We will try to get as much as possible electric energy, if we will succeed. We are working very, very, very hard on it.
Warm Regards,
A.R.
Steven N. Karels:
1- no
2- no
Warm Regards,
A.R.
Dear Andrea,
Do you think you make an E-Cat that produces more electrical power than heat?
Kind regards,
Frank Acland
Dear Andrea Rossi,
Since the eCat-SK involves a plasma, will:
a. this make the operation of the eCat-SK more sensitive to external magnetic fields?
b. If a. is true, will you need to add magnetic shielding to your eCat-SK?
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today in other posts of this blog,
Warm Regards,
A.R.
Enrique:
No.
Warm Regards,
A.R.
Jacob:
Thanks to you for your attention for our work,
Warm Regards,
A.R.
Jobert:
To make electric energy from heat causes a loss of energy of about 65%, making heat fron electric energy the COP is almost 1, considering that the cosphi of a resistor is 1.
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
What do you think is the advantage to make electricity as much as possible instead of heat, since with heat you can make also electricity?
Jobert
Thank you for publishing your paper
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Did you modyfy the charge of the Ecat we see in http://www.ecatskdemo.com respect the patent?
Thnkx
Wilfried Babelotzky:
Thank you for the information,
Warm Regards,
A.R.
Are you aware of this system to make air conditioned by means of heat?
https://www.sounenergy.nl/theac-25/
This could be a good match for the Ecat make a complete climatization.
Stephen:
Thank you for the information,
Warm Regards,
A.R.
Dear Andrea
After reading this there were a couple of interesting aspects to it that I thought might be of interest to you.:
https://m.phys.org/news/2019-04-atomic-straighter-cascading-silicon-peashooters.html
It’s amazing to me how fast things are moving in these areas of technology.
Best Regards
Stephen
Dear Readers:
Please go to
http://www.rossilivecat.com
to read comments published today in other posts of this blog,
Warm Regards,
A.R.
Burt:
History creates the templates of actions.
Warm Regards,
A.R.