.
by
U.V.S. Seshavatharam
Honorary faculty, I-SERVE, Survey no-42, Hitech city, Hyderabad-84, Telangana, India
S. Lakshminarayana
Dept. of Nuclear Physics, Andhra University, Visakhapatnam-03, AP, India
.
Read the whole article
Download the ZIP file
.
Abstract
Aim of this paper is to highlight the four major applications of Cold Nuclear fusion (CNF).
Considering Google publications, NASA publications, European funding amounts and other important experimental results, we have developed a mechanism for understanding the mystery of energy liberation in CNF associated with fusion of hydrogen with metals.
Apart from clean thermal energy liberation, we have identified three important applications of CNF. They are: Preparing Iridium-, Platinum-and Gold-like costly elements from Tungsten-like elements, converting high level nuclear radioactive waste into stable atomic nuclides and preparing radioactive isotopes for medical applications.
It may be noted that, we have developed a common, simple and workable theoretical procedure for understanding the above applications and it needs funding for conducting experimental studies.
We emphasize the point that, our proposed scientific concept of CNF is practical compared to other theoretical models of cold nuclear fusion.
.
Read the whole article
Download the ZIP file
.
Steve D:
1a- yes
1b- no
2- no
3- yes
4- it will depend on the specific custom situations, if any
Warm Regards,
A.R.
Dear Andrea Rossi
1a) The 10W and 100W reactors are different components?
1b) 100W is the same 10W reactor but driven harder?
2) In response to Frank you write “The 10 W, as described in our data sheet, will be available too.”
Will the 10W mini consist of a 100W reactor but driven at low power?
3) Will the 10W reactor still be manufactured so therefore two different reactors are to be produced?
4) Where two different reactors will be manufactured requiring different, though some common set up and tooling, this will affect the economics, and regardless, is there a revised formula to calculate reaching of the 1M order target?
Thank you.
Olov:
1- yes
2- yes
Warm Regards,
A.R.
Dear Andrea,
is the 3 kW E-cat assambled of 30 100 W E-cats, and you can still buy 10 W E-cats?
So any size bigger then 100 W is assambled of 100 W E-cats?
Thank you, the development of E-cat seems to be very positive now 🙂
Olov:
Yes,
Warm Regards,
A.R.
Dear Andrea,
so is it not light from the E-cat that makes a PV system and the E-cat more effeicent then the sum of the two individually?
Olov:
Yes,
Warm regards,
A.R.
Olov:
Confidential,
Warm Regards,
A.R.
Dear Andrea,
Can the light from the ecat be used to illuminate. Then you have fullfilled your dream. Do you remember the light pole in your dream?
Dear Andrea,
besides the suncell effect, do the electricity generated from the e-cat makes the light less bright or the same?
Thank you
Dear Steven,
About:
Cost Analysis on whether a “suitcase” charging unit in a Tesla EV makes sense
Impressive analysis,
and the most important is maybe that you dont have to stop or worrying about charging and no need to buy a charger.
Thank you
And thank you Dr Rossi for Never Giving Up
Olov:
Thank you for your thorough and intelligent study,
Warm Regards,
A.R.
Dear Andrea,
Do you find this summery of article http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions to be correct:
Premise and Abstract: The paper is a major revision of Rossi’s original pre-print, focusing on theories surrounding the formation of dense exotic electron clusters in the E-Cat SK. It discusses various effects and interactions, such as Casimir, Aharonov-Bohm, and collective effects, potentially involved in this process. A significant part of the abstract is a relativistic interaction Lagrangian, suggesting the existence of very low entropy charge aggregates and emphasizing the primary role of electromagnetic potentials in these clusters.
Introduction: The article explores long-range particle interactions, which are crucial for understanding the E-Cat technology. Rossi references previous work that highlights the role of electrons in these interactions.
Theoretical Framework: Rossi discusses how Coulomb repulsion between electrons might be balanced by the Casimir force and how magnetic forces could play a role in charge confinement. He proposes a relativistic interaction Lagrangian to describe these low entropy aggregates and discusses the idea that a narrow Electron Energy Distribution Function (EEDF) might favor the formation of these structures.
Energy from the Vacuum: The discussion includes the idea that energy can be extracted from electromagnetic zero-point radiation through vacuum pressure. This relates to concepts like the Aharonov-Bohm effect and quantum vacuum fluctuations.
Neutral Pico-Metric Aggregates: The discussion includes the possibility that tightly packed electron-proton aggregates might form, representing a new type of matter at the picometer scale. Rossi also mentions specific spectral signatures that could indicate the presence of these structures.
Experimental Setup: Rossi describes the experimental setup of the E-Cat SK, including the use of spectrometers, ohmmeters, frequency meters, and other instruments to measure and analyze the plasma in the E-Cat unit.
Evaluation of E-Cat SK Performance: The article concludes with a discussion on the performance of the E-Cat SK, including calculations of the plasma temperature and the unit’s energy output. Rossi reports a high coefficient of performance (COP), indicating a significant energy output compared to the energy input.
In summary, the paper examines theoretical and experimental aspects of the E-Cat technology, focusing on the physical phenomena that might underlie its functioning and the potential for generating energy from novel sources.
Hi Andrea. I am here after a few years. Can you or somebody summarize the current state of research and development of this E-CAT technology? and What a possible roadmap for commercialization could be? Thanks.
Lars Lindberg:
Thank you for your insight,
Warm Regards,
A.R.
Dera Andrea is this correct:
The Casimir effect is an attractive force between two metal plates that are very close together in the vacuum. This is because the virtual photons that make up the zero point energy in the vacuum have different wavelengths and frequencies. When the plates are close to each other, only those photons that have wavelengths smaller than the distance between the plates can exist between them. This means that there are fewer photons and less zero point energy between the plates than outside them. This creates a pressure difference that pulls the plates towards each other.
One possible method of using the Casimir effect to create energy is to vary the distance between the plates in a controlled way. If the plates are connected to an electrical circuit, they can act as a capacitor that stores electrical energy. As the plates approach each other, the Casimir force increases and makes a work of the tiles. This work increases the electrical energy in the circuit.
Lars Lindberg:
Yes,
Warm Regards,
A.R.
Dear Andrea,
Will the presentation of the Ecat SKLep NGU be done also with the EV after the demonstration in a solar system ?
Lars Lindberg:
Yes,
Warm Regards,
A.R.
Dear Andrea,
So even if I connect the E-Cat skl-NGU between a load and the grid I will benefit from the synergy effect that the sum of the two powers is greater than the separate power sources?
Olov:
Yes,
Warm Regards,
A.R.
Dear Andrea,
is the added power from E-cat skl ngu connected to solar panels greather then the two of them for them self?
Daniel G. Zavela:
Thank you for the link.
Warm Regards,
A.R.
Dear Dr. Rossi,
I came across this video on Zero Point Energy.
Have you heard about Dr. Garrett Moddel’s work?
https://youtu.be/dB_SDiIJjYI?si=AnDJfPS6ZOUj4aw4
Best Regards,
Daniel G. Zavela
Jean Paul Renoir:
Yes, they are indeed,
Warm Regards,
A.R.
Gediminas:
Thank you for the infermation,
Warm Regards,
A.R.
Dear Andrea,
In Lithuania this month we had 24h electric auto race, winner Tesla 3 went 600 cirlces *1.5 km =900 km in this time and average speed was about 40 km/h. If You prepare car with Ecat as backup for battery it could be definitely winner of such rase 🙂
Best success in Ecat improvements !
Best Regards,
Gediminas
Dr Rossi,
Are the microchips fundamental in the new generation of Ecats ?
Thank you if you can answer,
JPR
Olov:
Yes,
Warm Regards,
A.R.
Dear Andrea,
how far could you go with the EV test before you could see the safty issue, did you get enough power to do the test before you could see the saftey problem?
Jan Šrajer,
With respect to the solitary “A” that shows up now and then, it appears to be the result of a transient glitch (bug) in the “rossilivecat” software. If you go to the source feed you’ll see that the “A” response isn’t in there.
W.
Jan Srajer:
Probably there has been some involuntary spamming. Please resend your comment,
Warm Regards,
A.R.
Mr.Rossi
Pardon my curiosity, but what does the capital A mean in your answer?
All the Best J.Š
Deear Readers:
Please go to
http://www.rossilivecat.com
to find comments published in other posts of this blog,
Warm Regards,
A.R.
Anonymous:
In the USA,
Warm Regards,
A.R.
Where is made all the work to manufacture the new Ecat SKLep-NEVERGIVEUP ?
Yuri:
I agree,
Warm Regards,
A.R.
Dr Rossi,
The streaming made for the EcatSKLep-SSM-powered lamp has already given evidence beyond any possible doubt that the Ecat has generated an amount of energy that no battery with the same weight could generate; notwithstanding this fact, it is important that you restart the same streaming to give also evidence of the lifetime of it.
All the best
Yuri
Lars Lindberg,
Thank you for your suggestion,
Warm Regards,
A.R.
Dear Andrea,
Could you consider to increase the Watt Power at the new stream so the light is brighter